Specifications

28 Dolby
®
Professional Reference Monitor Manual
Using the Professional Reference Monitor
2.4.6 Configuring the HD-SDI Link Format
Toconfigurethisparameter,presstheSYSTEMkeytoactivatethetabmenu,thenusethe
arrowkeys(orthe
SYSTEM key)tomovetotheFormat tab.TheHD-SDILink Format screen
appears,asshowninFigure 2‐34.
Figure2‐34 
Figure 2-34 System/HD-SDI Link Format Screen
Inthisscreen,youcanspecifytheinputformatifHD-SDI DetectionissettoManual—orifit
isset
toAutomatic,buttheSMPTEPICassignmentsaremissingorincomplete(see
Figure 2‐33).
Youcanchangethecurrent
4:2:2 and4:4:4 settingsbypressingthe arrowkeys,andthen
pressingthe
ENTERkey.Agrayed‐outfieldindicatesthatitisincompatiblewiththe
currentlyselectedHD‐SDIlinkmodeandinputformat.
Caution: IfyouchangetheHD‐SDIlinkformat,youmustselecttheappropriateHD‐SDI
linkmode,asshowninFigure 2‐33.
Note: IfyousettheHD‐SDIlinkformattoXYZorLu’v’,theprimariesandwhitepoint
parametersareinaccessible.(DolbyLu’v’isanewvideoformatdevelopedby
DolbyLaboratoriesforpotentialfuturevideoapplications.)