Specifications

Configuring the System Parameters
Dolby
®
Professional Reference Monitor Manual 27
2.4.5 Configuring the HD-SDI Link Mode
Toconfigurethisparameter,presstheSYSTEMkeytoactivatethetabmenu,thenusethe
arrowkeys(orthe
SYSTEM key)tomovetotheLink Mode tab.
The
HD-SDILink Mode screenappears,asshowninFigure 2‐33.Inthisscreen,youcan
specifythe input mode.
Figure2‐33 
Figure 2-33 System/HD-SDI Link Mode Screen
Youcanchangethecurrentsettingsbypressingthearrowkeys,andthenpressingthe
ENTERkey.
HD-SDI Detection Automaticspecifiesthatthesystemautomaticallydetectstheinputmode
(
SingleorDual).HD-SDI Detection Manual allowsyoutoselecttheinputmodeandspecify
acompatibleinputformatinthe
HD-SDILink Format screen(showninFigure 2‐34).The
systemcanaccepttheinputasdual‐linkHD‐SDIwhenoneofthefollowingconditions
apply:
•
HD-SDI DetectionissettoManual,HD-SDILink ModeissettoDual,andthesystem
detectssourcesonboththeHD‐SDIAandHD‐SDIBinputs.
•
HD-SDI DetectionissettoAutomatic,andtheHD‐SDIAandHD‐SDIBinputsreceive
SMPTE352payload identifierchannel(PIC)assignmentsthatspecifybothchannel1
andchannel2.
Inallothercases,thesystemignorestheHD‐SDIBinputandacceptstheHD‐SDIAinput
(ifpresent)asasingle‐linkinput
.
Caution: IfyouchangetheHD‐SDIlinkmode,youmustselecttheappropriateHD‐SDI
linkformat,asshowninFigure 2‐34.