Specifications

Editing the Reference and Emulation Parameters
Dolby
®
Professional Reference Monitor Manual 15
2.3 Editing the Reference and Emulation Parameters
YoucaneditthePRM‐4200referenceandemulationparametersusingtheRemote.
Table 2‐4showstheeditmodeparametersforthe
CRTReferenceandDynamicReference
modes,andtheCustom1,Custom2,LCD,andPDPemulationmodes.
Table 2-4 Reference Mode and Emulation Mode Edit Parameters
2.3.1 Editing the CRT Reference Parameters
ToedittheCRT referenceparameters:
1. Pressthe
CRT REFERENCEkey,thenpresstheSTATUSkey.
The
CRT Reference Mode statusscreendisplaysthecurrentinputandoutputformats,
asshownintheexampleinFigure 2‐13.
Figure2‐13 
Figure 2-13 CRT Reference Mode Status Screen
2. PresstheEDIT key,asshowninFigure 2‐14.
Figure2‐14 
Figure 2-14 Accessing the CRT Reference Parameters
CRT Dynamic Custom 1 & 2 LCD PDP
InputFormat
VideoRange
Brightness
Contrast
Luminance
InputFormat
VideoRange
Brightness
Contrast
Luminance
InputFormat
VideoRange
InputFormat
VideoRange
InputFormat
VideoRange
Note: Youcanactivateonlyonemodeatatimebypressingitsrespectivekey.Whenyou
pressakey,itilluminatesinyellow.Enablingonemodedisablesanyothermode.
Press EDIT