Specifications

6 Dolby
®
Professional Reference Monitor Manual
Using the Professional Reference Monitor
2. ConnectyourrequiredinputsandoutputsonthePRM‐4200rearpanel,asshownin
Figure 2‐2.
Figure2‐2 
Figure 2-2 Connect Inputs and Outputs
•UsetheHD‐SDIAinputforsingle‐linkformats.
•UsetheHD‐SDIAandBinputsfordual‐linkformats.
3. ConnecttheRemoteControltothePRM‐4200usingthe providedEthernetcable, then
connecttheprovidedpowersupplytoanACpowersourceandconnecttheRemote 
totheDCsi
deofthepowersupply,asshowninFigure 2‐3.
Figure2‐3 
Figure 2-3 Connecting the Remote Rear-Panel Ports
Note: TousetheHD‐SDIinputs,youneedtoconfigurethe HD‐SDIlinkmodeand
HD‐SDIlinkformatparameters,asdescribedinSection 2.4.5andSection 2.4.6.
DVI in
Audio sync out
HD-SDI A & B
A
in
HD-SDI A & B out
To external network
To Remote Control
(Ethernet) (Ethernet)
To monitor (Ethernet)
AC Ad t
To power