Technical data

10-2 Accessories MKE UL/CSA
DOK-MOTOR*-MKE*UL/CSA*-PR01-EN-P
10.2 Gearboxes
Planetary gearboxes
Planetary gearboxes of lines GTS and GTP are suitable for mounting to
MKE motors.
Note: Gearboxes do not undergo an inspection for Ex protection.
Rexroth Indramat does not provide any guarantee or
responsibility when it supplies MKE motors with connected
gearboxes. The Ex protection inspection certificates are solely
for the MKE motors. All other mechanical attachments are not
taken into account and require an explicit acceptance in the
responsibility of the machine/system manufacturer.
In S5 operation, they are especially suitable for use in gear racks or
toothed belt drives in handling systems with high velocity and
accelerations (e.g. loaders, robots).
· Maintenance-free operation due to use of service-life lubrication
· Use under adverse ambient conditions due to completely closed
housing in protective category IP65
· A gear-tooth system with low backlash due to gear wheel pairs.
· High torsional strength because the load is distributed over three
planet pinions.
· High degree of efficiency due to the planet pinion principle.
· High dynamics due to favorable torque/inertia ratio.
· Compact construction means light weight.
· Pinions and belt pulleys can be directly mounted onto the shaft
because the bearing assemlby design makes high radial loads
possible.
· The flange design permits drill holes in the flange as per B5 (DIN
42959 Sec. 1, ed. 08.77) with dril holes in flange.
The output elements can be mounted in two different ways:
- force-locked shaft-hub connection with a plain output shaft
- form-fitting shaft-hub connection with output shaft with keyway.
High operation reliability
High level performance
Easy mounting to the machine