Technical data

MKE UL/CSA Introduction 1-1

DOK-MOTOR*-MKE*UL/CSA*-PR01-EN-P

1 Introduction

This chapter describes how this documentation is intended to be used

(see “About this Documentation”). Section 1.1 provides a general

introduction to the product.

1.1 Introduction to the product

In connection with the intelligent Rexroth Indramat digital drive control

devices, MKE*UL/CSA AC synchronous motors provide inexpensive drive

system solutions with many functions for use in explosion-endangered

areas.

Motors with the following continuous torques at standstill and nominal

speeds are available:

Fig. 1-1: Continuous torques at standstill of the available MKE UL/CSA motors

MKE UL/CSA motors have the following advantages:

· motors designed in “pressurized encapsulation” according to EN 50

014 :1992

· high operational reliability

· maintenance-free operation (due to brushless design and use of

permanently lubricated bearing)

· use under adverse ambient conditions (due to completely closed

motor design in protective class IP 65)

· overload protection (due to motor temperature monitoring)

· high performance

· high dynamics (due to favorable torque – inertia mass relationship)

· can be overloaded without problems (due to favorable heat diffusion

from the stator coils to the external wall of the motor housing)

· peak torque can be used over a large speed range (due to electronic

commutation)

· continuous start-stop operation with high repetition frequencies

possible (due to electronic commutation)

· simple connection to the machine (due to flange according to DIN

42948 : 11.65)

Area of use

Performance overview

Advantages

M[Nm]

Motortyp / Kühlart

Baulänge

Übersicht_MKE.xls