Technical data

MKE UL/CSA MKE098 9-1
DOK-MOTOR*-MKE*UL/CSA*-PR01-EN-P
9 MKE098
9.1 Technical data
Designation Symbol Unit
Data
Motor type MKE098B-047
Nominal motor speed
1)
n
K
rpm 3200
Continuous torque at standstill M
dN
Nm 12.0
Continuous current at standstill I
dN
A 13.9
Theoretical maximum torque
2)
M
max
Nm 43.5
Peak current I
max
A 62.6
Rotor inertia
3)
J
M
kgm² 43.0 x 10
-4
Torque constant at 20ºC K
m
Nm/A 1.0
Voltage constant at 20ºC K
E(eff)
V/1000
rpm
91.0
Winding resistance at 20ºC R12 Ohm 1.2
Winding inductance at 20°C L12 mH 10.1
Thermal time constant
T
th
min 60
Minimum cross-section of power
wires
S mm² 1.0
Mass
3)
m
M
kg 18
Permissible ambient
temperature
5)
T
um
ºC 0 to +40
Permissible storage and
transport temperature
T
L
ºC -20 to +80
Maximum installation
elevation
6)
h m 1000 above sea level
Protection category
7)
IP 65
Insulation class according to EN 60034-1 : 1998 F
Hazard category Class I, Groups C and D
UL listing E203009
Housing coat Black primary coat
(RAL 9005)
1) Depending on moment required by application. For standard applications, see n
max
in
the selection lists for the motor/controller combination. For other applications, the real
speed must be determined with the required torque using the torque-speed
characteristics .
2) The maximum torque that can be attained depends on the drive control device used.
Only the maximum torques M
max
that are listed in the selection lists for the
motor/control device combination are binding.
3) Without holding brake.
4) At 1000 rpm.
5) With devating ambient temperatures, see section 12.1.
6) With devating installation elevations, see section 12.1.
7) With proper assembly of the power and feedback cables.
Fig. 9-1: Technical data, MKE098