Technical data

MKE UL/CSA Type Code 5-5
DOK-MOTOR*-MKE*UL/CSA*-PR01-EN-P
MKE motors can be supplied with a terminal (junction) box. The cable exit
direction of UL/CSA motors is supplied according to the order. For the EU
model, only cable exit direction B is available. However, the cable exit
direction can be changed when the motors are assembled.
Cable exit direction
Motor type A side B side Right Left
MKE037 X X X X
MKE047 X X X X
MKE098 X X X X
Fig. 5-9: Cable exit directions available during assembly
5.9 Housing design
Abbrevation column 18
Depending on the location of use (country), different regulations apply.
The housing design is available in the following variants.
Option Housing design Remarks
E According to European standard
(EN)
in preparation
U According to American standard
(UL)
Fig. 5-10: MKE housing design
5.10 Other designs
Abbrevation columns 19 20
No special designs available.
5.11 Standard references
“Standard references” indicates standards (e.g. DIN, EN, ISO, etc.) or
similarly applicable production standards (INN, etc.) that are cited in the
type code. The edition valid at the time that the type code is issued is
listed in each case.
Supplied condition