Technical data

MKE UL/CSA Appendix 16-3
DOK-MOTOR*-MKE*UL/CSA*-PR01-EN-P
DIN EN 60079-14;
VDE 0165 Teil 1
1998-08
Electrical apparatus for explosive gas atmospheres - Part 14: Electrical
installations in hazardous areas (other than mines) (IEC 60079-14:1996);
German version EN 60079-14:1997
N 60079-14(1997-08);
IEC 60079-14(1996-12)
DIN EN 60529;
VDE 0470 Teil 1
2000-09
Degrees of protection provided by enclosures (IP code) (IEC 60529:1989
+ A1:1999); German version EN 60529:1991+ A1:2000
EN 60529(1991-10);
EN 60529/A1(2000-02);
IEC 60529(1989-11);
IEC 60529 AMD 1(1999-11)
DIN EN 60721-3-3
1995-09
Classification of environmental conditions - Part 3: Classification of groups
of environmental parameters and their severities; section 3: Stationary
use at weatherprotected locations (IEC 60721-3-3:1994); German version
EN 60721-3-3:1995
EN 60721-3-3(1995-01);
IEC 60721-3-3(1994-12)
DIN IEC 60721-1
1997-02
Classification of environmental conditions - Part 1: Environmental
parameters and their severities (IEC 60721-1:1990 + A1:1992 + A2:1995);
German version EN 60721-1:1995 + A2:1995
EN 60721-1(1995-04);
EN 60721-1/A2(1995-07);
IEC 60721-1(1990-12);
IEC 60721-1 AMD 1(1992-12);
IEC 60721-1 AMD 2(1995-04)
DIN VDE
0170/0171-9
1988-07
Electrical apparatus for potentially explosive atmospheres; encapsulation
"m"; german version EN 50028:1987
EN 50028(1987-02)
IEC 60072-1
1991-02
Dimensions and output series for rotating electrical machines; part 1:
frame numbers 56 to 400 and flange numbers 55 to 1080
IEC 60072-2
1990-12
Dimensions and output series for rotating electrical machines; part 2:
frame numbers 355 to 1000 and flange numbers 1180 to 2360
IEC 60072-3
1994-03
Dimensions and output series for rotating electrical machines; part 3:
small built-in motors; flange numbers BF10 to BF50
IEC 60364-4-41
1992-10
Electrical installations of buildings; part 4: protection for safety; chapter 41:
protection against electric shock
IEC 60364-4-41
AMD1
1996-02
Electrical installations of buildings; part 4: protection for safety; chapter 41:
protection against electric shock; Amendment 1
IEC 721-1
replaced by DIN IEC 60721-1
IEC 721-3-3
replaced by DIN IEC 60721-3-3
UL 1446
1997-05
Systems of insulating materials - General
UL 508C
1996-11
Power conversion equipment
UL 674*ANSI 674
1994-04
Electric motors and generators for use in divisions 1 harzardous
(classified) locations
Fig. 16-1: List of standards