Technical data

15-12 Appendix for Motor Sizes 530G and 530L Rexroth IndraDyn T
DOK-MOTOR*-MBT********-PR03-EN-P
15.6 Assembling the Motor Encoder and the Covers
After the stator has been attached to the machine and the rotor has been
attached to the shaft, the encoder can be connected.
Note: The motor encoder is not in the scope of delivery for the
motor; it must be provided by the user.
Carry out the following steps:
1. Attach the motor encoder to the shaft.
2. Close the motor housing and the encoder installation space with the
covers provided.
3. Make the electrical connection according to section 11.4 and the
coolant connection according to section 11.5.