Technical data

Rexroth IndraDyn T Operating Torque Motors 12-19
DOK-MOTOR*-MBT********-PR03-EN-P
Waste Disposal
Note: To simplify handling of the rotor during disposal, we
recommend that the magnetic field / the permanent magnets
on the rotor be neutralized. This is accomplished by heating
the rotor in a heating furnace at no less than 265°C for at least
3 hours.
The manufacturing process of the products is executed in such a manner
that energy and raw materials are optimized; in addition the process
permits recycling and the utilization of incidental waste.
Bosch Rexroth regularly tries to replace polluted raw materials and
supplies by environmentally friendly alternatives.
Bosch Rexroth products do not contain any kind of dangerous substances
which could be released with proper use. Normally, no negative
influences for the environment can be assumed .
We guarantee that our products include no substances according to
chemical ban regulations. Furthermore, our products are free of mercury,
asbestos, PCBs and chlorinated hydrocarbons.
Basically, our motors contain
• steel
• aluminum
• copper
• brass
• magnetic materials
• electronic components and modules
Most of the products can be recycled due to the high metal proportion. To
reach optimum metal recovery, disassembly into individual components is
necessary.
The metals also contain electrical and electronical components that can
be recycled using special separation processes. The hereby arising
plastics could be thermally recycled.
The products manufactured by us can be returned to our premises for
waste disposal at no charge. This is possible only if the product does not
contain any disturbing adhesions such as oil, grease or other
contamination.
Furthermore, it is not permitted that the product contains inappropriate
foreign materials when it is returned.
The products must be delivered postage-free to the following address:
Bosch Rexroth AG
Electric Drives and Controls
Bürgermeister-Dr.-Nebel-Strasse 2
97816 Lohr am Main, Germany
High-quality products need optimal packaging. The packaging material
consists of paper, wood and polystyrene.
This can be recycled everywhere.
For ecological reasons, a return transport of the packaging should not
take place.
Manufacturing process
Application
Forbidden substances
Material composition
Recycling
Returns
Packaging