Technical data

12-14 Operating Torque Motors Rexroth IndraDyn T
DOK-MOTOR*-MBT********-PR03-EN-P
12.9 Deactivation
In the case of malfunctions, maintenance measures or to deactivate
the motors, proceed as follows:
1. Observe the instructions of the machine documentation.
2. Use the machine-side control commands to bring the drive to a
controlled standstill.
3. Switch off the power and control voltage of the drive device.
4. Switch off the master switch of the machine and deactivate external
systems according to the instructions of the manufacturer.
5. Secure the machine against accidental movements and against
unauthorized operation.
6. Wait for the discharge time of the electrical systems to elapse; then
disconnect all electrical connections, if necessary. Protect all
electrical cables and contacts against contact with other electrically
conducting parts.
7. Document all executed measures in the commissioning report and
the machine maintenance plan.
12.10 Dismantling
DANGER
Fatal injury due to errors in activating motors
and working on moving elements!
⇒ Do not work on unsecured, operating machines.
⇒ Secure the machine against accidental movements
and against unauthorized operation.
⇒ Before dismantling, secure the motor and power
supply against falling or movements before
disconnecting the mechanical connections.
1. Observe the instructions of the machine documentation.
2. Please heed the safety notes and carry out all steps as described in
the above instructions in the "Deactivation" section.
3. Before dismantling, secure the motor and power supply against falling
or movements before disconnecting the mechanical connections.
4. Empty the coolant duct of the motor and dismantle the motor from the
machine. Store the motor properly!
5. Document all executed measures in the commissioning report and
the machine maintenance plan.