Technical data

Rexroth IndraDyn T Installation 11-9
DOK-MOTOR*-MBT********-PR03-EN-P
11.5 Coolant Connection
Connect the coolant supply for the motor according to chapter 8.6 “Motor
cooling” and the connection diagrams of the machine manufacturer.
The entire coolant system must be checked for leaks and deaeration
before the commissioning the machine. Therefore, note the instructions of
the manufacturer.
Note:
• No force may affect the motor-side screws via the supply
cables.
• The terminal diagrams of the product documentation are
used to generate the system circuit diagrams. Solely the
system circuit diagrams of the machine manufacturer are
decisive for connecting the drive components to the
machine. This also applies to the integration of systems for
pressure reduction, flow and temperature control.
• Commissioning of the coolant system is not part of
commissioning of the motor. Heed the notes of the
machine and coolant system manufacturers.