Technical data

Rexroth IndraDyn T Installation 11-1
DOK-MOTOR*-MBT********-PR03-EN-P
11 Installation
11.1 Safety
WARNING
Injuries due to live parts! Lifting of heavy loads!
Danger of damage!
⇒ Carry out all working steps especially carefully. In
this way, you minimize the risk of accidents and
damage.
⇒ Use suitable lifting equipment and protective
equipment and wear protective clothing during
transport.
⇒ Do not lift or move the motor by the loom of cables.
⇒ Install the motors only when they are de-energized
and not connected electrically.
⇒ Observe the notes regarding safety and handling
notes in previous chapters.
The number and sequence of the steps here described can be affected
by the characteristics of the machine construction and deviate from the
schematical procedure. The following description is provided only for
orientation. Only the assembly instructions of the machine manufacturer
are binding.
11.2 Mounting Ring
Upon delivery, the stator and rotor of IndraDyn T motors of size 450 and
530 are optionally connected with a mounting ring The following figure
shows the construction.
Rotor MRT
Stator MST
Ring
2
1
Mbt8.EPS
(1): Fastening screw of the mounting ring
(2): Hole for ring screws
Fig. 11-1: IndraDyn T mounting ring