Technical data

Rexroth IndraDyn T Application Notes 9-9

DOK-MOTOR*-MBT********-PR03-EN-P

9.7 Fastening

Stator

The stator is fastened to one of the two stator ends using screwed

connections. In no case may both ends be screwed on. Depending on the

stator type selected, the stator ends may have different diameters,

simplifying assembly (see Fig. 9-2).

When planning the installation, note the selected output direction of the

power cable as well as the information in the dimension sheets, especially

• the number and type of fastening holes,

• the torque,

• and the depth of thread.

Mbt3.EPS

(1): Side with larger outer diameter (exaggerated view)

(2): Side with smaller outer diameter

Fig. 9-12: Example of IndraDyn T stator mounting

Note:

• The necessary screw length depends on the machine

construction.

• In no case may both stators ends be screwed on.

• The screwed connections must be able to take up both

the force due to the weight of the motor and the forces

acting during operation.

• Notice the minimum depth of thread for screwed

connections on stator type MST.