Technical data

8-2 Connection Techniques Rexroth IndraDyn T
DOK-MOTOR*-MBT********-PR03-EN-P
8.2 Connection Cables
Antriebsregelgerät
drive controller
Stator MST.....
Verbindungsstelle
junction point
Leistungskabel
power cable
Anschlusskabel
connecting cable
ANSCHL_MST.EPS
Fig. 8-1: IndraDyn T connection diagram
In the standard design, the stators are electrically connected using an
• approx. 2m-long connection cable with wire end ferrules.
Stators with type key option “Other design ...D30x” are supplied with an
• approx. 2m-long single wires with wire end ferrules.
• approx. 1.5m-long single wires for MST210 in design “...D301”.
The connection cable is guided on the stator side with either the larger or
smaller external diameter.
The following overview provides the technical data of these connection
cables for the individual stator sizes.
D
R
Y
Ansicht Y
View Y
E
MST_Anschlusskabel.EPS
Fig. 8-2: Connection cable on stator