Technical data

Rexroth IndraDyn T Connection Techniques 8-1
DOK-MOTOR*-MBT********-PR03-EN-P
8 Connection Techniques
8.1 Notes
CAUTION
Destruction of the motors by direct connection
to the 50/60Hz mains network (three-wire or
single-phase mains)!
⇒ The motors described here may be operated only
with suitable drive control devices, with variable
output voltage and frequency (converter mode), as
specified by Rexroth.
Bosch Rexroth offers a wide range of ready-made cables, which are
optimally adapted to our products and different demands, for connecting
IndraDyn T motors.
Note:
• Note that self-assembled cables or cable systems from
other manufacturers may not fulfill these criteria.
• Thus Bosch Rexroth shall not be held responsible for
damages resulting from their use.
• The chosen connection must be suitable for the applied
intermediate circuit voltage.
• The design of the power cable also depends on the control
device used. Please observe the documentation of the
drive device.
You can find additional information ...
• on selecting power and encoder cables for IndraDyn T motors in the
Documentation “Rexroth Connection Cables”, MNR. R911282688
• for assembling cables and plugs, as well as technical data, in the
documentation "Rexroth Connection Techniques, Assembling and
Tools...", MNR. R911286117.
• for connection and dimensioning of cooling systems for IndraDyn T
motors in the documentation "Liquid Cooling of Rexroth Drive
Components", MNR. R911265836.
• for "electromagnetic compatibility (EMC) for drive and control
systems" in the documentation of the same name, MNR. R911259814.