Technical data

7-2 Accessories Rexroth IndraDyn T
DOK-MOTOR*-MBT********-PR03-EN-P
Order
The mounting rings for IndraDyn T motors are allocated according to the
stator that is used.
Depending on the requirements,
• an unassembled mounting ring (see Fig. 7-2) or
• a pre-assembled mounting ring (see Fig. 7-3)
can be ordered.
Mounting ring MNR For stator
RING-MOUNTING M01-MBT450 R911296650 MST450.-....-FT-N0CN-NNNN
RING-MOUNTING M02-MBT450 R911298824 MST450.-....-FT-N0SN-NNNN
RING-MOUNTING M01-MBT530 R911294612 MST530.-....-FT-N0CN-NNNN
RING-MOUNTING M02-MBT530 R911295876 MST530.-....-FT-N0SN-NNNN
RING-MOUNTING M03-MBT530 R911296195 MST530.-....-ST-N0CN-NNNN
Fig. 7-2: MBT – unassembled mounting ring
SUP designation MNR For stator
SUP-M01-MBT450 R911296645 MST450.-...-FT-N0CN-NNNN
SUP-M02-MBT450 R911298825 MST450.-...-FT-N0SN-NNNN
SUP-M01-MBT530 R911296536 MST530.-...-FT-N0CN-NNNN
SUP-M02-MBT530 R911296537 MST530.-...-FT-N0SN-NNNN
SUP-M03-MBT530 R911296538 MST530.-...-ST-N0CN-NNNN
Fig. 7-1: MBT – pre-assembled mounting ring
Handling
The mounting ring can be used several times. Undamaged installation
rings can be sent back to the manufacturer.
Therefore, please heed the following procedure:
Ordering
You will find a special text in the quote of Bosch Rexroth, you may copy
this into your purchase order. Herewith, the assignment of stator type and
installation ring can be traced during order processing. The fixed buy-
back price for the mounting ring is already stipulated in the quote.
Waybill
Upon delivery of a mounting ring, a “SUP-MBT waybill” including further
information is in the packing unit. Please keep it for the eventually return
of the mounting ring.
Reconsignment
1. Contact the Rexroth branch which supplied you and ask for a return
number (RGA number).
2. Fill out the data on the backof the waybill completely.
3. Send the undamaged goods together with the waybill – no postage
required – to the destination.
Unassembled mounting ring
Pre-assembled mounting ring