Technical data

Rexroth IndraDyn T Accessories 7-1

DOK-MOTOR*-MBT********-PR03-EN-P

7 Accessories

7.1 Mounting Ring

To simplify the handling, transport and mounting of Rexroth IndraDyn T

synchronous torque motors, a mounting fixture should be made by the

machine manufacturer according to his own specifications. This can

significantly simplify work, especially for the sizes 450 and 530. The

required dimension information is shown at the end of this chapter.

By specifying his own construction, the machine manufacturer can

optimally take into account constructional details and special work

flows on his machine during assembly, commissioning and

servicing.

For sizes 450 and 530, Rexroth can provide mounting rings upon request

at additional cost. The stator and rotor are then delivered in a pre-

assembled condition if they are ordered in this manner.

Note:

• Special constructional features of the machine or special

designs cannot be taken into account in the Rexroth

mounting rings.

• The Rexroth mounting ring is only to be used as an

assembly or application tool and must be removed before

the motor is commissioned electrically.

• Heed the safety notes regarding handling of magnetic

parts.

Construction

Rotor MRT

Stator MST

Ring

Mbt8.EPS

(1): Fastening bolts for attaching the mounting ring

(2): Threaded holes for insertion of ring bolts to assist in lifting

Fig. 7-1: Mounting ring for the IndraDyn T MST/MRT