Technical data

18-4 Assembly MHD Sychronous motors
version 0.1 DOK-MOTOR*-MHD********-PR05-EN-P
Connecting Cable Sets
Power cables
When fitting the INS0681 power connector with thread, proceed as
follows:
1. Put the power connector onto the thread of the connection housing in
the correct position.
2. Tighten the union nut of the power connector manually. By leading the
cable in further, the power connector can be steadily put to its final
position.
3. Tighten the union nut as securely as you can manually.
When fitting the INS0381 or INS0481 power connector with bayonet lock,
proceed as follows:
1. Put the power connector onto the bayonet lock of the connection
housing in the correct position.
2. Turn the union nut of the power connector in manually until it snaps
into the final position (i.e. when the red dots comply with the red
triangles).
Encoder cable
When fitting the encoder connector, proceed as follows:
1. Put the encoder connector onto the thread of the connection housing
in the correct position.
2. Tighten the union nut of the power connector manually. By leading the
cable in further, the encoder connector can be steadily put to its final
position.
3. Tighten the union nut as securely as you can manually.
Fitting the power connector for
MHD041
MHD071
and MHD090
Fitting the power connector for
MHD093 - MHD131
Assembly of the encoder
connector