Technical data

MHD Sychronous motors Accessories 14-1
DOK-MOTOR*-MHD********-PR05-EN-P
14 Accessories
Sealing Air Connection Accessories
Sealing air connectors are available for MHD motors. They are attached
to the motor by simply replacing the motor flange socket cover. The
overpressure inside the motor prevents penetrating oils, aggressive
coolants, and the like from entering.
For plastic pipe
Turnable in any direction
Tightening torque 1Nm
INS0613 INS0480 INS0380
Tightening torque 3Nm Tightening torque 3Nm
Caution: Ensure proper seating of the O-rings before mounting!
For plastic pipe For plastic pipe
sperrl_sup.fh10
Fig. 14-1: MHD air-pressure connector kit
Note: When mounting the motor flange socket covers with sealing
air connector, ensure that the O-rings are properly seated. The
degree of protection required is ensured only with correct
assembly.
The motor flange socket covers available with sealing air connector are
listed in the table below.
Motor flange socket (type) Description
INS0480 (power connector) SUP-M01-MHD
INS0380 (power connector) SUP-M02-MHD
INS0613 (feedback connector) SUP-M03-MHD
Fig. 14-2: Sealing air connector accessory
Optional Sealing Air Connector
Ordering name of accessory
sets