Technical data

Rexroth IndraDyn H Dimensional Sheet IndraDyn H 5-1
DOK-MOTOR*-MBS-H******-PR02-EN-P
5 Dimensional Sheet IndraDyn H
For your orientation:
The dimensioned drawings in this chapter are combined according to the
sizes. The drawings for each size always follow in this order:
• Dimension sheet of the complete motor with axial cooling connection
and rotor design “1N”.
• Dimension sheet of the complete motor with axial cooling connection
and rotor design “2N”.
• Dimension sheet of the complete motor with radial cooling connection
and rotor design “1N” (only for sizes 182 and 312).
• Dimension sheet of the complete motor with radial cooling connection
and rotor design “2N” (only for sizes 182 and 312).
• Single part drawing of the stator with axial cooling connection
• Single part drawing of the stator with radial cooling connection (only
for size 182)
• Single part drawing of the rotor in design “1N”
• Single part drawing of the rotor in design “2N”
The dimensions and tolerances shown in the drawings underlie the
following standards:
Longitudinal dimensions: DIN ISO 2768, part 1
Angular dimension: DIN 7168 middle
Form and position tolerance: DIN ISO 1101