Technical data

12-2 Startup, Operation and Maintenance Rexroth IndraDyn H
DOK-MOTOR*-MBS-H******-PR02-EN-P
12.2 Basic Requirements
The following preconditions must be fulfilled for successful startup.
• Compliance to the safety instructions and notes.
• Check of electrical and mechanical components for safe functioning.
• Availability and supply of required materials.
• Adherence to the startup procedure described below.
Check of all Electrical and Mechanical Components
Carry out a check of all electrical and mechanical components before
starting startup. Heed the following points in particular:
• Safety of personnel and machine
• Proper installation of the motor.
• Correct power connection of the motor.
• Correct connection of the encoder.
• Functioning of available safety limit switches, door switches, etc.
• Proper functioning of the emergency stop circuit.
• Machine construction / mechanical installation in proper and complete
condition.
• Correct connection and functioning of the motor cooling system.
• Proper connection and functioning of the drive controller unit.
WARNING
Danger to life, severe injury or material damage
due to errors or malfunctions on mechanical or
electrical components!
⇒ Troubleshoot mechanical and electrical components
before continuing startup.
WARNING
Risk of injury or danger to life, as well as
damage due to non-adherence of warning and
safety notes!
⇒ Adherence of the warning and safety notes.
⇒?Startup must to be executed by skilled personnel.
⇒ Adherence to the startup procedure described below.