Technical data

11-24 Assembly Instructions Rexroth IndraDyn H
DOK-MOTOR*-MBS-H******-PR02-EN-P
11.12 Dismantling the Motor Spindle
Dismantling of the motor spindle occurs in inverse order of assembly.
Proceed as follows:
1. Loosen and remove the fastening screw between the end plate and
the spindle housing.
2. Using suitable lifting equipment, pull the rotor package out of the
center of the stator package.
Note: Avoid contact with or damage to the surfaces of the interiors
of the rotor and stator during removal.
Hoisting gear
Rotor package
Stator package
Mounting flange
Spindle housing
RotStatpaket2_EN.EPS
Fig. 11-25: Dismantling the motor spindle