Technical data

11-22 Assembly Instructions Rexroth IndraDyn H
DOK-MOTOR*-MBS-H******-PR02-EN-P
Proceed as follows:
1. Ensure that both components are free of dirt.
2. Using suitable lifting equipment, move the rotor package over the
center of the stator package.
3. Slowly lower the rotor package over the stator package and let it
move into the stator package.
Note: Avoid contact with or damage to the surfaces of the interiors
of the rotor and stator during insertion.
4. Attach the end plate to the spindle housing.
WARNING
Injuries/damage due to strong magnetic field
⇒ Carefully move the rotor package towards the
stator. Danger of squeezing!
⇒ Due to the permanent magnets on the rotor and the
resulting magnetic forces, the rotor is attracted to
the stator.
Hoisting gear
Rotor package
Stator package
Mounting flange
Spindle housing
RotStatpaket_EN.EPS
Fig. 11-22: Motor spindle assembly