Technical data

Rexroth IndraDyn H Assembly Instructions 11-21
DOK-MOTOR*-MBS-H******-PR02-EN-P
6. Using appropriate lifting equipment, slowly pull out the stator
(caution: the stator is heavy!).
Hoisting gear
Lifting eye nut
Threaded rod with
spacer sleeve
Spindle housing
STATAUSBAU_H_EN.EPS
Fig. 11-21: Removing the stator from the spindle housing
11.11 Mounting the Motor Spindle
After the rotor has been mounted on the spindle and the stator has been
installed in the spindle housing, the parts can be assembled into a
complete motor spindle.
Note: The pre-assembled rotor package must be inserted centrally
into the prepared stator package.
• Ensure that assembly equipment is on hand so that the
rotor package can be inserted centrally into the stator.
CAUTION
Material damage and/or injuries due to transport
procedures!
⇒ Heed all required notes regarding safety when
working with transport and load handling equipment.
⇒ Carefully move the spindle with the rotor towards
the stator. Danger of squeezing!