Technical data

Rexroth IndraDyn H Assembly Instructions 11-7
DOK-MOTOR*-MBS-H******-PR02-EN-P
11.4 Assembling a Rotor with a Smooth Shaft on the Spindle
Parts / Scope of Delivery of the Rotor with a Smooth Shaft
Rotor MRS.xx2
threaded pins for balancing the rotor
(different number and versions depending upon model)
1 type plate
1 delivery slip
Made in Germany
2
S.No.
ROTOR OF 3-PHASE INDUCTION MOTOR
1MR310-123456
1MRxxxxxxx
n max. 4800 min-1
m 111 kg
S.No.
INN 13.09
LPROTOR_1N_EN.EPS
Fig. 11-5: Scope of delivery of the rotor with design 1N
Before Assembly
Assembly should be carried out in a dry, dust-free environment. The
following preparatory measures should be taken for this purpose:
Check to see whether all parts of the delivery are present
Visually check the rotor for any damage.
Mount the type plate in a conspicuous position on the spindle
housing.
The inside diameter of the rotor and the press fits on the spindle must
be thoroughly cleaned of dirt, dust and metal shavings.
Oil the press fits on the spindle.
ÖL
ÖL
EXVORMON2_H_EN.EPS
Fig. 11-6: Preparing the spindle for assembly
Prepare the work fixture for the rotor so that the rotor is supported
vertically and can take up the spindle.