Technical data

11-2 Assembly Instructions Rexroth IndraDyn H
DOK-MOTOR*-MBS-H******-PR02-EN-P
The procedures depicted below offer an overview of the individual
assembly steps.
prepare for mounting
mounting the stator into
the machine body
connect the el. wires
of the stator
stator is mounted and
el. connected
scheme of mounting
rotor to spindle
prepare for mounting
shrink-fit the rotor
onto the spindle
balance the rotor
rotor is fixed on the
spindle for further mounting
scheme of mounting the stator
MONTROTSTAT_H.EPS
Fig. 11-1: Procedure for assembling the rotor and the stator
Assembly steps