Technical data

Rexroth IndraDyn H Assembly Instructions 11-1
DOK-MOTOR*-MBS-H******-PR02-EN-P
11 Assembly Instructions
In addition to providing technical characteristics, this chapter describes
how
• the rotor is mounted to the spindle,
• the rotor is removed from the spindle,
• the stator is installed in the spindle housing,
• the stator is removed from the spindle housing,
• the rotor package is installed in the stator package.
Carefully executing the steps described here will ensure:
• proper and safe assembly and disassembly of the constructional
parts,
• the proper functioning of the frameless spindle motor
The notes regarding safety listed in chapter 3 and in this chapter must
absolutely be heeded. They help to prevent accidents and damage to
materials resulting from improper handling.
Additionally, special notes regarding safety are listed in the assembly
guidelines. These can be found where there is increased danger or
where it could possibly occur.
The basic procedures for mounting and removing the components is
always the same. The procedure can vary, however, from that described
here, depending on the construction of the spindle and its housing.
These assembly instructions are therefore simply general in nature and
must be adapted to suit the given demands. The assembly instructions
of the manufacturer of the spindle and of the spindle housing are binding
and have priority over the procedure described here.
Notes regarding safety
Obligation