Technical data

8-6 Connection Techniques Rexroth IndraDyn H
DOK-MOTOR*-MBS-H******-PR02-EN-P
The components for the connection with terminal box are not available
from Rexroth. Possible suppliers are among others:
Components Supplier
Terminal boxes
KIENLE & SPIESS
Stanz- und Druckgießwerk GmbH
Bahnhofstraße 23
74343 Sachsenheim
Tel.: [phone] - 0
Fax: [phone] - 1488
Internet www.kienle-spiess.de
Terminal blocks
MORGAN REKOFA GmbH & Co. KG
Walporzheimer Strasse 100
53474 Bad Neuenahr-Ahrweiler
Tel.: [phone] / 387 - 0
Fax: [phone] / 387 - 33 95
Mail: [e-mail]
Terminal strips
WIELAND ELECTRIC GmbH
Benzstrasse 9
96052 Bamberg
Internet: www.wieland-electric.com
Fig. 8-6: Suppliers of terminal box components
Pay attention to the following when selecting the components:
• The components must be suited for currents and voltage of the
chosen drive system. Especially for high DC bus voltages up to 750
V
DC
.
• Necessary diameter and connection thread of the PG-thread.
• Impermeability of the housing. Minimum protection class IP65
recommended.
A complete terminal box consists, for example, of the following
components:
1
2
3
4
5
6
4 x
Klemmkasten.EPS
1: Cover 2: Gasket
3: Ground connection 4: Cable entry
5: U-V-W terminal block 6: Terminal strip
Fig. 8-7: Terminal box