Product Warranty

STEP 4:
INSTALLING ROLL-GUARD
Tools needed: rubber mallet
Parts needed: 1- Roll-guard
1- Ladder tread
#1: With the ladder laying on
it’s side, slide the roll-guard into
track, grab handle first.
#2-6: Slide roll-guard around to other side of ladder.
#4 #5 #6
#7-8: Install bottom tread. IMPORTANT: this bottom tread
MUST be installed to block the track, roll-guard must not
come in contact with pool liner.
#9: Using a sharp
knife carefully cut
off the plastic tabs.
#10: Roll-guard finished!
65799-Confer-Model7200USr4.ps 3/23/09 2:46 PM Page 6