User Manual

Ⅱ．Set up
Ⅲ．Wearing the Receiver Collar
1. Charge the devices respectively for 2 hours and above.
a. Remote control: The battery icon of remote control will be
full after it is fully charged.
b. Receiver: When red light on the receiver turns green, it is
fully charged. When the red light flashes, it is low battery.
1. Put the collar on the dog.
Set up the voltage level.
Press and hold Static Intensity Adjustment Button and simultane-
ously rotate Static Intensity Regulator until the digit on the screen
reaches a suitable intensity.
There is individual
difference, always use the
right voltage for your dog.
+1 second+
8
2. Adjust the nylon belt to the right size.
3
. Cut off the excess part of the belt with
scissors.
4
. Burn the be it's end with the lighter to prevent
the thread from fraying.