User Manual

Ⅴ. How to pair the remote with multiple receivers
Pair the remote control and receiver
This dog training collar supports maximum 3 receivers with only 1
remote control. (Remote control and receiver have been paired
with channel #1 from delivery.)
●
●
●
●
●
●
●
●
10
Ⅵ. Trouble shooting
2. After confirming that the receiver is turned off, hold the On/Off
Button of receiver for 3 seconds until the LED Indicator Light
on receiver flashes alternately in red and green.
3. Hold the Pairing Button on the remote control for 1.5 seconds.
When the receiver makes a beep, the pairing is completed.
1. Toggle the channel switching button, and select channel 2 or
3. After selecting, the display will show the channel number.
3secs
1.5secs
※
1. No display on LCD Display when the device is turned on. Or
the device is unable to turn off.
●The operation function is abnormal. Press the Pairing Button
and the LEVEL Button at the same time to restart the remote
control.
2. Remote control/Receiver runs out of power quickly.
●Make sure the charger and Remote control/Receiver is
securely connected.
●Charge it up to 2 hours or above.
3. Remote control doesn't work.
● Recharge the Remote control.
● Check the keypad lock, Unlock the remote control.
● Pair Remote control and Receiver again.