Manual

User's Guide Page 15
Basic presets (same as Pocket Control and Pocket Fader)
Preset 1 Volume Controller 7 channels 1- 16
feedback
Preset 2 Panorama Controller 10 channels 1- 16
feedback
Preset 3 Cutoff Channel Controller 74 channels 1- 16
feedback
Preset 4 Resonance Controller 71 channels 1- 16
feedback
Presets 1 ~ 4 use a single controller type, with each knob relating to it’s corresponding MIDI channel,
this allows full control of 16 parts within a multitimbral sound generator, or realtime mixing in sequencer
automation.
Preset 5 Volume/Pan Controller 7/10 channels 1- 8
feedback
Preset 6 Volume/Pan Controller 7/10 channels 9- 16
feedback
Preset 7 Cutoff /Resonance Controller 74/71 channels 1- 8
feedback
Preset 8 Cutoff/Resonance Controller 74/71 channels 9- 16
feedback
Presets 5 ~ 8 use two controllers, one across the top row of knobs and the other across the bottom row.
With Preset 5, the top row is MIDI controller 7 (Volume) with the MIDI channel corresponding to the
knob number, whilst the lower row is MIDI controller 10 (Pan) on the same channel as the knob above it,
hence knob 9 is channel 1, knob 10 is channel 2 etc. Preset 6 follows the same idea except the MIDI
channel is channels 9 to 16, so the actual MIDI channel relates to the lower knob numbers. Preset 7,
again follows the same idea as Preset 5 except the top row is MIDI controller 74 (Filter Cut off ) and the
lower row is controller 71 (Filter Resonance), and finally Preset 8 is the same as Preset 7 except the
channels are 9-16.
Preset 9 general controllers Controllers 0 - 15 master channel
feedback
Preset 10 general controllers Controllers 16 - 31 master channel
feedback
Preset 11 general controllers Controllers 32 - 47 master channel
feedback
Preset 12 general controllers Controllers 48 - 63 master channel
feedback
Preset 13 general controllers Controllers 64 - 79 master channel
feedback
Preset 14 general controllers Controllers 80 - 95 master channel
feedback
Preset 15 general controllers Controllers 96 - 111 master channel
feedback
Preset 16 general controllers Controllers 112 - 127 master channel
feedback
Presets 9 ~ 16 are general controller sets, which transmit on the Master Channel. Where the receiving
MIDI device can be programmed to any controller it can receive, these presets maybe the only presets
needed, although preset 9 is perhaps best avoided for general use as it includes controller 0 (could
trigger MIDI program bank changes) and controller 1 which is the modulation wheel, although of course
there may be instances when MIDI controller 1 is required, such as adding a modulation wheel function
to a keyboard (such as a digital piano). Preset 13 also needs to be used with caution, as controller 64 is
defined as the sustain/damper pedal function, and most devices will always receive this controller as
Damper or Hold.