Instruction Manual

USER INTERFACE
30
3030
30
The left picture shows an example with Range from = 20 and Range to = 120. If the
knob is turned from left (ccw) to right (cw) the data 20...120 are generated.
The right picture shows an example with Range from = 120 and Range to = 20. If
the knob is turned from left (ccw) to right (cw) the data 120...20 are generated. The
characteristics is reverse compared to the first example.
Edit Control: Step
Here you set the step resolution of the corresponding control value. As default step
is set to 1 for having the full resolution. The 4 pictures show increasing values for
the step parameter. The step value cannot be less than the Threshold value.
Range to
e.g. 120
Range from
e.g.120
Range from
e.g. 20
Range to
e.g. 20
ccw cw# control range ! ccw cw# control range !