Instruction Manual

USER INTERFACE
22
2222
22
Controller Properties
Most of the control functions from the libraries have variables with which you can
control Midi events e.g. Midi channel.
To change the properties of a knob click once on the
rightmouse and then on „properties“. Now you‘re going to get
what you’ve been looking for! (the properties menu,
yippee
)
☺. Here you can alter the settings of the selected control
knob with the pop up menus, e.g. Midi channel, controller
numbers. To activate the changes click on „
O.K.
or cancel to
abort.
When the Drehbank is connected correctly to the P.C editor you can then
immediately check the revised control functions.
Preset sending and storing
When you press the
" Send Preset" button you send the complete preset from the
editor to the volatile memory (RAM) of the Drehbank
.
. .
.
With the „Store preset“
button you copy the complete preset into the non-volatile memory (EEPROM) of
the Drehbank. This takes about 82 seconds. During this eternity ☺ the L.E.D. will
blink constantly.