Owner's manual

A-113

Subharmonic Generator

System A - 100

doepfer

3. Controls

1 Display

This is the 2-digit LED display that shows the current

value of the divisor

In addition the

decimal points

of the displays are

used to display the current mixture (see fig. 5):

• no

decimal point is on:

mixture "00"

•

right decimal points are on: mixture "01"

• left decimal points are on: mixture "10"

• both

decimal points are on:

mixture "11"

The mixture selected depends upon the states of the

two gate inputs

und

(see chapter 4).

2 Up • 3 Down

The Up button 2 resp. the Down button 3 are used to

adjust the divisor (range

0101

2424

) for the correspon-

ding frequency divider.

Fig. 5: Display of mixtures by means of decimal

points (from left to right: "00", "01", "10", "11")

H Before you adjust the divisors be sure that

you have selected the right mixture!

The Up/Down buttons of frequency divider 4 are

used for

preset selection

instead of divisor adjstment

if the preset button

is operated simultaneously.

Level

The attenuators

control the amount of the

respective subharmonic present at the mix output