User Manual

doepfer
System A - 100
Sampler
A-112
5
5 Switch • 6 Switch • 7 Switch
With the 3-position switches 4 to 6 the operating
mode is selected. The table on the left lists all possible
modes. The modes are described in the following
paragraphs.
In particular the gate signal (gate input § / manual
trigger
4
) controls different functions in the respective
operating modes.
H
Please note that in some modes it is not
sufficient to change the switches position to
exit the mode. In the following description of
the modes you will find detailed information
on how to exit a selected mode.
5
55
56
66
67
77
7
Function
Loop
not implemented
Dmp Norm
Dump a sample
Wav
Dump a wave
Loop
Play a loop
S1, S2 Play Norm
Play a sample
Wav
Play a wave
Loop
Record a loop
Rec Norm
Record a sample
Wav
Record a wave
Len
Input sample length required
Pit Norm
Pitch Shift
Frz.
Pitch Shift with "Freeze"
Len
Input sample length required
Eff
Del Norm
Delay
Frz.
Delay with "Freeze"
Len
Input sample length required
Rev Norm
Reverse Delay
Frz.
Reverse Delay with "Freeze"