User guide

ROOF LUGG AGE R ACK

• The crossbars on your vehicle are delivered stowed within the roof rack side rails.

When installed, the roof rack can hold a maximum of 150 lbs (68 kg) of evenly

distributed weight.

Installing The Crossbars

• To install the crossbars, completely loosen the thumb screws at both ends and lift

the crossbar from its stowed position.

• Bend the pivot points at each end of the crossbar and slide the thumb screw down.

• Set the crossbars into position and tighten the thumb screws.

NOTE: Position the crossbars across the roof making sure the letters on the crossbar

align with the matching letters on the side rail.

• Refer to the Owner's Manual on the DVD for further details.

UTILITY