User guide

• Insert the metal part of the emergency

key under the chrome bezel at the 6

o’clock position and gently pry the

button loose.

NOTE:

• The ENGINE START/STOP button should

only be removed or inserted with the

ignition in the LOCK position (OFF

position for Keyless Enter-N-Go™).

Engine Starting/Stopping

Starting

• With a valid Keyless Enter-N-Go™ Key

Fob inside the vehicle.

• Place the shift lever in PARK or

NEUTRAL.

• While pressing the brake pedal, press

the ENGINE START/STOP button once.

If the engine fails to start, the starter

will disengage automatically after

10 seconds.

• To stop the cranking of the engine prior to the engine starting, press the button

again.

Stopping

• Place the shift lever in PARK.

• Press the ENGINE START/STOP button once. The ignition switch will return to the

OFF position.

•

If the shift lever is not in PARK, the ENGINE START/STOP button must be held for two

seconds and vehicle speed must be above 5 mph (8 km/h) before the engine will shut off.

Accessory Positions with Engine Off

NOTE:

• The following functions are with the driver’s foot OFF the Brake Pedal (Transmission

in PARK or NEUTRAL Position).

Starting With The Ignition Switch In The OFF Position:

• Press the ENGINE START/STOP button once to change the ignition switch to the

ACC position.

• Press the ENGINE START/STOP button a second time to change the ignition

switch to the ON/RUN position.

• Press the ENGINE START/STOP button a third time to return the ignition switch to

the OFF position.

GETTING ST ARTED