2WD01-926-AA Durango Third Edition User Guide Get the free mobile app for your phone http://gettag.mobi Download a free Vehicle Information App by visiting your application store, Keyword (Dodge), or scanning the Microsoft Tag. To put Microsoft Tags to work for you, use your mobile phone’s browser or App store to download a Microsoft Tag reader, like the free one at www.gettag.mobi. Then follow the directions to scan the code.
If you are the first registered retail owner of your vehicle, you may obtain a complimentary printed copy of the Owner’s Manual, Navigation/Media Center Manuals or Warranty Booklet by calling 1-800-423-6343 (U.S.) or 1-800-387-1143 (Canada) or by contacting your dealer. The driver’s primary responsibility is the safe operation of the vehicle. Driving while distracted can result in loss of vehicle control, resulting in a collision and personal injury.
TABLE OF CONTENTS INTRODUCTION/WELCOME Welcome From Chrysler Group LLC . . . . 2 CONTROLS AT A GLANCE Driver Cockpit . . . . . . . . . . . . . . . 4 Instrument Cluster . . . . . . . . . . . . . 6 GETTING STARTED Key Fob . . . . . . . . . . . . . . Remote Start . . . . . . . . . . . Keyless Enter-N-Go™ . . . . . . Theft Alarm . . . . . . . . . . . . Seat Belt . . . . . . . . . . . . . Supplemental Restraint System (SRS) — Air Bags . . . . . . . . Child Restraints . . . . . . . . . Front Seats . . . . . . .
INTRODUCTION/WELCOME WELCOME FROM CHRYSLER GROUP LLC Congratulations on selecting your new Chrysler Group LLC vehicle. Be assured that it represents precision workmanship, distinctive styling, and high quality - all essentials that are traditional to our vehicles. Your new Chrysler Group LLC vehicle has characteristics to enhance the driver's control under some driving conditions. These are to assist the driver and are never a substitute for attentive driving. They can never take the driver's place.
INTRODUCTION/WELCOME Rollover Warning WARNING! • Pedals that cannot move freely can cause loss of vehicle control and increase the risk of serious personal injury. • Always make sure that objects cannot fall into the driver foot well while the vehicle is moving. Objects can become trapped under the brake pedal and accelerator pedal causing a loss of vehicle control.
DRIVER COCKPIT CONTROLS AT A GLANCE 4
G. Climate Controls pg. 35 F. Audio System (touch-screen-radio shown) pg. 40 E. Ignition Switch (behind steering wheel) D. Electronic Vehicle Information Center (EVIC) Display pg. 76 C. Instrument Cluster pg. 6 B. Turn Signal/Wiper/Washer/High Beams Lever (behind steering wheel) pg. 28 A. Headlight Switch pg. 27 pg. 37 I. Transmission Gear Selector − Power Folding Third Row Head Restraints pg. 23 − R. Driver's Memory Buttons pg. 19 Q. Power Door Locks P. Power Windows O.
CONTROLS AT A GLANCE INSTRUMENT CLUSTER Warning Lights - Low Fuel Warning Light BRAKE - Charging System Light** Oil Pressure Warning Light Engine Temperature Warning Light Transmission Temperature Warning Light Anti-Lock Brake (ABS) Light** Air Bag Warning Light** Electronic Throttle Control (ETC) Light Tire Pressure Monitoring System (TPMS) Light Seat Belt Reminder Light Brake Warning Light** Malfunction Indicator Light (MIL)** Electronic Stability Control (ESC) Activation/Malfunction Indicator Light*
CONTROLS AT A GLANCE Indicators - Turn Signal Indicators - Adaptive Cruise Control (ACC) ON Indicator* - High Beam Indicator - Adaptive Cruise Control (ACC) SET Indicator* - Front Fog Light Indicator* - Park/Headlight ON Indicator* - Vehicle Security Indicator* - Electronic Stability Control (ESC) Off Indicator* - TOW/HAUL Indicator* - Windshield Washer Fluid Low Indicator - AWD LOW Indicator - Door Ajar Indicator - Loose Gas Cap Indicator - Forward Collision Warning (FCW) OFF Indicator* - El
GETTING STARTED KEY FOB Locking And Unlocking The Doors/Liftgate • Press the LOCK button once to lock all the doors and the liftgate. Press the UNLOCK button once to unlock the driver’s door only and twice within five seconds to unlock all the doors and liftgate. • All doors can be programmed to unlock on the first press of the UNLOCK button. Refer to Programmable Features in this guide. Power Liftgate • Press the LIFTGATE button twice within five seconds to power open/close the Power Liftgate.
GETTING STARTED • In case the Key Fob battery is dead, use the emergency key to open the door. If the vehicle is equipped with Keyless Enter-N-Go™, remove the ENGINE START/STOP button by inserting the metal part of the emergency key under the chrome bezel at the 6 o’clock position and gently pry the button loose. NOTE: The ENGINE START/STOP button should only be removed or inserted with the ignition in the LOCK position (OFF position for Keyless Enter-N-Go™).
GETTING STARTED WARNING! (Continued) • Do not leave children or animals inside parked vehicles in hot weather. Interior heat build-up may cause them to be severely injured or killed. • Keep Key Fob transmitters away from children. Operation of the Remote Start System, windows, door locks or other controls could cause serious injury or death. • Driving with the liftgate open can allow poisonous exhaust gases into your vehicle. You and your passengers could be injured by these fumes.
GETTING STARTED KEYLESS ENTER-N-GO™ • The Keyless Enter-N-Go™ system is an enhancement to the vehicle's Key Fob. This feature allows you to lock and unlock the vehicle's door(s) and liftgate without having to press the Key Fob lock or unlock buttons, as well as starting and stopping the vehicle with the press of a button. To Unlock From The Driver or Passenger Side: • With a valid Keyless Enter-N-Go™ Key Fob located outside the vehicle and within 5 ft (1.
GETTING STARTED • If a Key Fob is detected in the vehicle when locking the vehicle using the power door lock switch, the doors and liftgate will unlock and the horn will chirp three times. On the third attempt, your Key Fob can be locked inside the vehicle. • After pressing the Keyless Enter-N-Go™ LOCK button, you must wait 2 seconds before you can lock or unlock the vehicle using the door handle.
GETTING STARTED • Insert the metal part of the emergency key under the chrome bezel at the 6 o’clock position and gently pry the button loose. NOTE: • The ENGINE START/STOP button should only be removed or inserted with the ignition in the LOCK position (OFF position for Keyless Enter-N-Go™). Engine Starting/Stopping Starting • With a valid Keyless Enter-N-Go™ Key Fob inside the vehicle. • Place the shift lever in PARK or NEUTRAL. • While pressing the brake pedal, press the ENGINE START/STOP button once.
GETTING STARTED NOTE: • If the ignition switch is left in the ACC or ON/RUN (engine not running) position and the transmission is in PARK, the system will automatically time out after 30 minutes of inactivity and the ignition will switch to the OFF position. ACC OFF Press Press RUN Press THEFT ALARM To Arm • Keyless Enter-N-Go™ button installed: Press the Keyless Enter-N-Go™ Start/Stop button until the Electronic Vehicle Information Center (EVIC) indicates that the vehicle ignition is “OFF”.
GETTING STARTED • A shoulder belt placed behind you will not protect you from injury during a collision. You are more likely to hit your head in a collision if you do not wear your shoulder belt. The lap and shoulder belt are meant to be used together. • A belt that is too loose will not protect you properly. In a sudden stop you could move too far forward, increasing the possibility of injury. Wear your seat belt snugly.
GETTING STARTED WARNING! • Relying on the air bags alone could lead to more severe injuries in a collision. The air bags work with your seat belt to restrain you properly. In some collisions, the air bags won't deploy at all. Always wear your seat belts even though you have air bags. • Being too close to the steering wheel or instrument panel during Advanced Front Air Bag deployment could cause serious injury, including death. Air bags need room to inflate.
GETTING STARTED • Loosen the child seat adjusters on the lower straps and tether straps so that you can attach the hook or connector to the lower tether anchorages more easily. • Attach the lower hooks or connectors over the top of the anchorage bars. The rear seat lower anchorages are round bars, located at the rear of the seat cushion where it meets the seatback. • The tether strap should be attached to the tether anchor on the rear of the seatback (behind the gap panel) using the most direct path.
GETTING STARTED Installing The Child Restraint Using The Vehicle Seat Belts • To install a child restraint, first pull enough of the seat belt webbing from the retractor to route it through the belt path of the child restraint and slide the seat belt latch plate into the buckle. • Next, extract all the seat belt webbing out of the retractor and then allow the belt to retract into the retractor. Finally, pull on any excess webbing to tighten the lap portion around the child restraint.
GETTING STARTED FRONT SEATS Power Seats • The power recline switch, located on the outboard side of the seat, controls seatback adjustment. • The power seat switch controls forward/back, up/down and tilt adjustment. Power Lumbar • Push the switch forward to increase the lumbar support. Push the switch rearward to decrease the lumbar support. • Pushing upward or downward on the switch will raise and lower the position of the support.
GETTING STARTED • Place the ignition switch in the ON/RUN position, select Remote Linked to Memory in the Electronic Vehicle Information Center (EVIC) and enter Yes. • Press 1 or 2 to recall the saved positions, or press UNLOCK on the programmed Key Fob. • Refer to the Owner's Manual on the DVD for further details. Manual Seat Adjustment Forward/Rearward • Lift up on the adjusting bar located at the front of the seat near the floor and release when seat is in desired position.
GETTING STARTED Fold-Flat Front Passenger Seat • The front passenger seat can be folded flat to allow for extended cargo space. Pull up on the recliner lever and fold the seatback forward and down to a flat position. CAUTION! Do not place any article under a power seat or impede its ability to move as it may cause damage to the seat controls. Seat travel may become limited if movement is stopped by an obstruction in the seat's path. WARNING! • Adjusting a seat while the vehicle is moving is dangerous.
GETTING STARTED REAR SEATS 60/40 Split Rear Seat Fold and Tumble • The left or right side of the second row seatback can folded flat to carry cargo. The left and right side of the second row seat can also be tumbled forward to allow access to the third row seat. • Pull upward on the release lever to release the seat. NOTE: Also, pulling upward on this handle allows the outboard seating positions to be reclined. • Tumble the seat forward using the red pull strap located behind the seatback.
GETTING STARTED NOTE: Also, pulling upward on this handle allows the outboard seating positions to be reclined. • Tumble the seat forward using the red pull strap located behind the seatback. NOTE: If sitting in the third row seat, pull rearward on the tumble pull strap located at the rear of the seat and tumble the seat forward. • If your vehicle is equipped with a mini console there is a stepping pad to allow passengers to easily access the third row seats.
GETTING STARTED HEATED/VENTILATED SEATS Front Heated Seats • The controls for front heated seats are located in the climate controls near the center of the instrument panel. • Press the switch once to select High-level heating. Press the switch a second time to select Low-level heating. Press the switch a third time to shut the heating elements Off. • If the High-level setting is selected, the system will automatically switch to Low-level after approximately 55 minutes.
GETTING STARTED WARNING! • Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaustion or other physical conditions must exercise care when using the seat heater. It may cause burns even at low temperatures, especially if used for long periods of time. • Do not place anything on the seat that insulates against heat, such as a blanket or cushion. This may cause the seat heater to overheat.
GETTING STARTED TILT/TELESCOPING STEERING COLUMN Manual - Tilt/Telescoping Steering Column • The tilt/telescoping control handle is located below the steering wheel at the end of the steering column. • Push the handle down to unlock the steering column. • To tilt the steering column, move the steering wheel upward or downward as desired. To lengthen or shorten the steering column, pull the steering wheel outward or push it inward as desired. • Pull up on the handle to lock the column firmly in place.
OPERATING YOUR VEHICLE ENGINE BREAK-IN RECOMMENDATIONS • A long break-in period is not required for the engine and drivetrain (transmission and axle) in your vehicle. • Drive moderately during the first 300 miles (500 km). After the initial 60 miles (100 km), speeds up to 50 or 55 mph (80 or 90 km/h) are desirable. • While cruising, brief full-throttle acceleration within the limits of local traffic laws contributes to a good break-in.
OPERATING YOUR VEHICLE Instrument Panel Dimmer • Rotate the dimmer control to the extreme bottom position to fully dim the instrument panel lights and prevent the interior lights from illuminating when a door is opened. • Rotate the dimmer control up to increase the brightness of the instrument panel when the parking lights or headlights are on. • Rotate the dimmer control up to the next detent position to fully brighten the odometer and radio when the parking lights or headlights are on.
OPERATING YOUR VEHICLE Rain Sensing Wipers • This feature senses moisture on the vehicle's windshield and automatically activates the wipers for the driver when the switch is in the intermittent position. Rotate the end of the lever to one of four settings to activate this feature and adjust sensitivity. • This feature can be activated/deactivated using the Electronic Vehicle Information Center (EVIC). Refer to the Programmable Features under the Electronics section in this guide.
OPERATING YOUR VEHICLE SPEED CONTROL • The speed control switches are located on the steering wheel. NOTE: The MODE button and DISTANCE SETTING button are only available on vehicles equipped with Adaptive Cruise Control (ACC). Cruise ON/OFF • Push the ON/OFF button to activate the Speed Control. • CRUISE READY will appear on the instrument cluster to indicate the Speed Control is on. • Push the ON/OFF button a second time to turn the system off.
OPERATING YOUR VEHICLE Accel/Decel (ACC Only) • Once a speed is set, pushing the RES + button once or the SET – button once will increase or decrease the set speed approximately 1 mph (1 km/h). • Push and hold the RES + button to accelerate in 5mph (10 km/h) increments or push and hold the SET – button to decelerate in 5mph (10 km/h) increments; release the button to save the new set speed. Distance Setting (ACC Only) • To set or change the distance setting, press the Distance button and release.
OPERATING YOUR VEHICLE Far • The default status of FCW is the “Far” setting. • The far setting provides warnings for potential collisions more distant in front of the vehicle, allowing the driver to have the most reaction time to avoid a collision. • This setting is designed to provide early warnings per NHTSA (National Highway Traffic Safety Administration) recommendations. • More cautious drivers that do not mind frequent warnings may prefer this setting.
OPERATING YOUR VEHICLE WARNING! (Continued) The ACC system: • Does not react to pedestrians, oncoming vehicles, and stationary objects (i.e., a stopped vehicle in a traffic jam or a disabled vehicle). • Cannot take street, traffic, and weather conditions into account, and may be limited upon adverse sight distance conditions. • Does not predict the lane curvature or the movement of preceding vehicles and will not compensate for such changes.
OPERATING YOUR VEHICLE ELECTRONIC RANGE SELECTION (ERS) • Electronic Range Select (ERS) allows you to limit the highest available transmission gear, and can be activated during any driving condition. When towing a trailer, using ERS shift control will help you maximize both performance and engine braking. • To switch from DRIVE mode to ERS mode, tap the shift lever to the left (-) once. The instrument cluster will display the current gear and the transmission will not upshift beyond that gear.
OPERATING YOUR VEHICLE AUTOMATIC TEMPERATURE CONTROLS (ATC) Automatic Operation • Press the AUTO button. • Select the desired temperature by pressing the Temperature Control buttons. • The system will maintain the set temperature automatically. Air Conditioning • If the air conditioning button is pressed while in the AUTO mode, the indicator light may flash three times to indicate the cabin air is being controlled automatically.
OPERATING YOUR VEHICLE Rear Temperature Controls • The rear controls for the ATC System are located in the headliner, near the center of the vehicle. • The rear temperature controls can be turned on two ways: • Press the REAR control button on the front temperature controls and adjust to the desired rear temperature. • Rotate the Rear Temperature Control or the Rear Blower Control knobs on the rear temperature controls.
OPERATING YOUR VEHICLE PARKSENSE® REAR PARK ASSIST • The four ParkSense® sensors, located in the rear fascia/bumper, monitor the area behind the vehicle that is within the sensors’ field of view. • When an object is detected within two meters behind the rear bumper while the vehicle is in REVERSE, a warning will display in the Electronic Vehicle Information Center (EVIC) and a chime will sound (when Sound and Display is selected from the Customer Programmable Features section of the EVIC).
OPERATING YOUR VEHICLE BLIND SPOT MONITORING • The Blind Spot Monitoring (BSM) system uses two radar-based sensors, located inside the rear bumper fascia, to detect Highway licensable vehicles (automobiles, trucks, motorcycles etc.) that enter the blind spot zones from the rear/front/side of the vehicle. • The Blind Spot Monitoring (BSM) system warning light, located in the outside mirrors, will illuminate if a vehicle moves into a blind spot zone.
OPERATING YOUR VEHICLE Pinch Protection Feature • This feature will detect an obstruction in the opening of the sunroof during Express Close operation. If an obstruction in the path of the sunroof is detected, the sunroof will automatically retract. Remove the obstruction if this occurs. Next, press the switch forward and release to Express Close.
ELECTRONICS YOUR VEHICLE'S SOUND SYSTEM 40
ELECTRONICS 41
ELECTRONICS Media Center 130 (Sales Code RES) NOTE: • Your radio has many features that add to the comfort and convenience of you and your passengers. Some of these radio features should not be used when driving because they take your eyes from the road or your attention from driving. Clock Setting • Press and hold the “TIME” button until the hours blink; turn the “TUNE/SCROLL” control knob to set the hours.
ELECTRONICS Store Radio Presets • Press the “SET/RND” button once and SET 1 will show in the display. Then select button (1–6). • A second station may be added to each push button. Press the “SET/RND” button twice and SET 2 will show in the display. Then select button (1–6). CD/DISC Operation Seek Up/Down Buttons • Press to seek through CD tracks. • Hold either button to bypass tracks without stopping. SET/RND Button (Random Play) • Press this button while the CD is playing to activate Random Play.
ELECTRONICS Media Center 130 with Satellite Radio (Sales Code RES + RSC) NOTE: • Your radio may not be equipped with the Uconnect™ Voice Command and Uconnect™ Phone features. To determine if your radio has these features, press the Voice Command button on the radio. You will hear a voice prompt if you have the feature, or see a message on the radio stating “Uconnect Phone not available” if you do not. • Your radio has many features that add to the comfort and convenience of you and your passengers.
ELECTRONICS Radio Operation Seek Up/Down Buttons • Press to seek through radio stations in AM, FM, or SAT bands. • Hold either button to bypass stations without stopping. Store Radio Presets • Press the “SET/RND” button once and SET 1 will show in the display. Then select button (1–6). • A second station may be added to each push button. Press the “SET/RND” button twice and SET 2 will show in the display. Then select button (1–6). Music Type • Press the “MUSIC TYPE” button to activate this mode.
ELECTRONICS • To select a folder from the list, press the “TUNE/SCROLL” control knob and the radio will begin playing the files contained in that folder. Audio Jack Operation • The Audio Jack allows a portable device, such as an MP3 player or a cassette player, to be plugged into the radio and utilize the vehicle’s audio system, using a 3.5 mm audio cable, to amplify the source and play through the vehicle speakers.
ELECTRONICS Clock Setting • Turn the radio on, then touch the screen where the time is displayed. • Touch the “USER CLOCK” soft-key (Navigation radio only). • To adjust the hours, touch either the “HOUR FORWARD” or “HOUR BACKWARD” soft-key. • To adjust the minutes, touch either the “MINUTE FORWARD” or “MINUTE BACKWARD” soft-key. • To save the new time setting, touch the screen where the word “Save” is displayed. Menu • Press the “MENU” hard-key to access the System Setup menu and the My Files menu.
ELECTRONICS Radio Operation • To access Radio Mode, touch the “RADIO” hard-key on the left side of the faceplate, then touch the “AM,” “FM” or “SAT” soft-key at the top of the screen to select the band. Seek Up/Seek Down • Press the “Seek Up” or “Seek Down” soft-keys to seek through radio stations in AM, FM, or SAT bands. Hold either Seek to bypass stations without stopping. Store Radio Presets • Select the radio band by touching either the “AM,” “FM,” or “SAT” soft-key.
ELECTRONICS CD/DVD Disc Operation • Press the “MEDIA” hard key to display the media source tabs at the top of the screen. Select the source by touching the “HDD,” “DISC,” or “AUX” media source soft-key tab. NOTE: Your Touch-Screen Radio will usually automatically switch to the appropriate mode when something is first connected or inserted into the system. Insert a CD/DVD Disc • To insert a disc, press the “LOAD” hard-key. • With the printed side upwards, insert the disc into the disc slot of the radio.
ELECTRONICS • The functions of the portable device are controlled using the device buttons. The volume may be controlled using the radio or portable device. Hard Disk Drive (HDD) Operation • The Hard Disk Drive (HDD) mode gives you access to the audio files on the internal hard disk drive. It functions similar to a CD player, with the exception that the internal HDD can hold more tracks. • It is also possible to import display pictures to the internal hard disk drive.
ELECTRONICS • Select the folders or titles you would like to copy, then touch the “DONE” soft-key to start the copy process. NOTE: The copy progress is shown in the lower left corner of the screen. Copying Pictures To The HDD • Insert either a CD or a USB device containing your pictures in JPEG format. • Press the “MY FILES” hard-key. • Touch the “My Pictures” soft-key to get an overview of the currently stored images, then touch the “Add” soft-key.
ELECTRONICS Cleaning Your Touch-Screen Radio • Do not spray any liquid or caustic chemicals directly on the screen. Use a clean and dry micro fiber lens cleaning cloth in order to clean the touch-screen. • If necessary, use a lint-free cloth dampened with a cleaning solution such as isopropyl alcohol or an isopropyl alcohol and water solution ratio of 50:50. Be sure to follow the solvent manufacturer's precautions and directions.
ELECTRONICS Finding A Place By Spelling The Name • From the Main Navigation Menu, touch “Where to?,” then touch “Points of Interest” and then touch “Spell Name.” • Enter the name of your destination. • Touch “Done.” • Select your destination and touch “Go.” Entering A Destination Address • From the main Navigation menu, touch “Where To?,” then touch “Address.” • Follow the on-screen prompts to enter the address and touch “Go.
ELECTRONICS Following Your Route • Your route is marked with a magenta line on the map. If you depart from the original route, your route is recalculated. A speed limit icon could appear as you travel on major roadways. Adding A Via Point • To add a stop (Via Point) you must be navigating a route. • Touch the “back arrow icon” to return to the Main Navigation menu. • Touch “Where To?,” then search for the extra stop. Then select the stop to add from the search results.
ELECTRONICS Acquiring Satellites • The GPS Satellite strength bars indicate the strength of your satellite reception. • Acquiring satellite signals can take a few minutes. When at least one of the bars is green, your device has acquired satellite signals. • You may experience delays in acquisition of satellite signals when in areas with an obstructed view to the sky, such as garages, tunnels, or large cities with tall buildings.
ELECTRONICS Clock Setting • Turn the radio on, then touch the screen where the time is displayed. • Touch the “USER CLOCK” soft-key. • To adjust the hours, touch either the “HOUR FORWARD” or “HOUR BACKWARD” soft-key. • To adjust the minutes, touch either the “MINUTE FORWARD” or “MINUTE BACKWARD” soft-key. • To save the new time setting, touch the screen where the word “Save” is displayed. Menu • Press the “MENU” hard-key to access the System Setup menu and the My Files menu.
ELECTRONICS Radio Operation • To access Radio Mode, touch the “RADIO/MEDIA” hard-key on the left side of the faceplate repeatedly until AM/FM/SAT appears at the top of the screen, then touch the “AM,” “FM” or “SAT” soft-key to select the band. Seek Up/Seek Down • Press the “Seek Up” or “Seek Down” hard-keys to seek through radio stations in AM, FM, or SAT bands. Hold either Seek to bypass stations without stopping.
ELECTRONICS CD/DVD Disc Operation • Press the “RADIO/MEDIA” hard key until the media source tabs are displayed at the top of the screen. Select the source by touching the “HDD,” “DISC,” or “AUX” media source soft-key tab. NOTE: Your Touch-Screen Radio will usually automatically switch to the appropriate mode when something is first connected or inserted into the system. Insert a CD/DVD Disc • To insert a disc, press the “OPEN/CLOSE” hard-key.
ELECTRONICS • The functions of the portable device are controlled using the device buttons. The volume may be controlled using the radio or portable device. Hard Disk Drive (HDD) Operation • The Hard Disk Drive (HDD) mode gives you access to the audio files on the internal hard disk drive. It functions similar to a CD player, with the exception that the internal HDD can hold more tracks. • It is also possible to import display pictures to the internal hard disk drive.
ELECTRONICS • Touch the “MY MUSIC” soft-key, then touch the “Add Music Files” to HDD soft-key. • Touch “From USB” soft-key, then select the folders or titles you would like to copy, and then touch the “SAVE” soft-key to start the copy process. NOTE: The copy progress is shown in the lower left corner of the screen. Copying Pictures To The HDD • Insert either a CD or a USB device containing your pictures in JPEG format.
ELECTRONICS Playing Music From The HDD • Press the “RADIO/MEDIA” hard key until the media source tabs are displayed at the top of the screen. Touch the “HDD” soft-key tab. Touch the desired track soft-key to play or touch the “SEARCH/BROWSE” soft-key to search by artist, by album, by song, by genre, from a folder, or from Favorites. Cleaning Your Touch-Screen Radio • Do not spray any liquid or caustic chemicals directly on the screen.
ELECTRONICS Main Navigation Menu Finding Points Of Interest • From the NAV main menu, touch the “Points of Interest” soft-key. • Select a Category and then a subcategory, if necessary. • Select your destination and touch “GO.” Finding A Place By Entering The Street Address • From the NAV main menu, touch “New Destination,” then touch “Street Address.” NOTE: If the wrong State and/or Country displayed are incorrect, touch the corresponding soft-key to make the correction.
ELECTRONICS Entering Your Home Location • Press the “NAV” hard-key on the right side of the radio. • From the Nav – Main Menu, touch “Guide Me Home” to enter your home address. If no home address has been set, touch “YES” to access the Enter Home Address menu. • Touch “Street Address” to enter your address. Touch the soft-key with your state’s name and enter your street name into the speller. • Once the street name has been input, touch “CONTINUE” to confirm. Enter the house number into the next screen.
ELECTRONICS Route Guidance • After starting route guidance, the system calculates the route and announces: “Follow the arrows on the display.” You will receive navigation recommendations by voice messages and screen displays. Route Options • After pressing the “OPTIONS” soft-key in the Route Guidance Menu, the following information is displayed: • In the left half of the screen, the current position and the current routing method are displayed. • “Take Detour” will allow you to calculate a different route.
ELECTRONICS Sirius XM™ SATELLITE RADIO/TRAVEL LINK NOTE: • Sirius Travel Link requires a subscription, sold separately after the 1 year trial subscription included with your vehicle purchase. • Sirius Travel Link is only available in the United States. • The following describes features that are available when in Sirius XM™ Satellite Radio mode. • To access Sirius XM™ Satellite Radio, press the “RADIO/MEDIA” or “RADIO” and then touch the “SAT” soft-key tab.
ELECTRONICS NOTE: Refer to your Media Center 730N or Media Center 430/430N User's Manual for more information. Display SAT Favorites List • Touch the “Search/Browse” soft-key and select “Favorites” from the SAT Browse screen. • Touch the desired favorites soft-key to switch the SAT tuner to the corresponding channel. • You may use the “LIST” soft-key to toggle between: • Favorite Songs. • Favorite Artists. • Currently playing favorites.
ELECTRONICS Replay Option Play/Pause Option Description Touch to Pause content playback. Touch Pause/Play again to resume playback. Rewind/RW Rewinds the channel content in steps of 5 seconds. Touch and hold to rewind continuously, then release to begin playing content at that point. Fast Forward/FW Forwards the content, and works similarly to Rewind/RW. However, Fast Forward/FW can only be used when content has been previously rewound.
ELECTRONICS STEERING WHEEL AUDIO CONTROLS • The steering wheel audio controls are located on the rear surface of the steering wheel. Right Switch • Press the switch up or down to increase or decrease the volume. • Press the button in the center to change modes AM/FM/DISC/SAT/HDD/AUX. Left Switch • Press the switch up or down to search for the next listenable station or select the next or previous CD or HDD track.
ELECTRONICS • When connected to this feature: • The iPod® can be controlled using the radio buttons to Play, Browse, and List the iPod® or external devices contents. • The iPod® battery charges when plugged into the USB port (if supported by the specific audio device). • Compatible iPod® devices may also be controllable using voice commands. Refer to the Owner's Manual on the DVD for details. NOTE: • The USB port supports certain Mini, Classic, Nano, Touch, and iPhone® devices.
ELECTRONICS Uconnect™ Phone • To determine if your vehicle is equipped with Uconnect™ Phone, press the “Uconnect™ Phone” button . If your vehicle has this feature, after a couple seconds you will hear a voice prompt. If not, you will see a message on the radio “Uconnect phone not available”. • The Uconnect™ Phone is a voice-activated, hands-free, in-vehicle communications system with Voice Command Capability (see Voice Command section). NOTE: To access the tutorial, press the “Uconnect™ Phone” button .
ELECTRONICS Phonebook Phonebook Download – Automatic Phonebook Transfer From Mobile Phone • If equipped and specifically supported by your phone, Uconnect™ Phone automatically downloads names (text names) and number entries from your mobile phone’s phonebook. Specific Bluetooth® Phones with Phone Book Access Profile may support this feature. Automatic Transfer is indicated by a green arrow at the bottom of the screen. See Uconnect™ website for supported phones.
ELECTRONICS Mute (Or Unmute) Microphone During Call • During a call, press the “Voice Command” button . • (After the BEEP), say “mute” (or “mute off”). Transfer Ongoing Call Between Handset And Vehicle • During a call, press the “Voice Command” button . • (After the BEEP), say “transfer call”. Changing The Volume • Start a dialogue by pressing the “Phone” button during a normal call.
ELECTRONICS Common Voice Commands (Examples) Main Menu Radio Mode Sirius XM™ Satellite Radio Mode Disc Mode Memo Mode “Radio” (to switch to the radio mode) “Disc” (to switch to the disc mode) “Memo” (to switch to the memo recorder) “System Setup” (to switch to system setup) “Frequency” (to change the frequency) “Next Station” (to select the next station) “Previous Station” (to select the previous station) “Radio Menu” (to switch to the radio menu) “Main Menu” (to switch to the main menu) “Channel Numbe
ELECTRONICS • Press the “Voice Command” button started. and after the BEEP, say “SMS” to get NOTE: To access the tutorial, press the “Voice Command” button . After the BEEP, say “tutorial”. Press any hard-key/button or touch the display (Touch-Screen radio) to cancel the tutorial. WARNING! Any voice commanded system should be used only in safe driving conditions following local laws and phone use. All attention should be kept on the roadway ahead.
ELECTRONICS • The video screen displays information in a split-screen format. The left side of the screen is referred to as Channel 1 and the right side of the screen is referred to as Channel 2. All modes except video modes are displayed in a split-screen format. • To use the headphones, press the power button located on the right ear cup. Select the channel on the headphones (1 or 2) that corresponds to the channel selected on the VES™ screen.
ELECTRONICS ELECTRONIC VEHICLE INFORMATION CENTER (EVIC) • The EVIC features a driver interactive display that is located in the instrument cluster. Pressing the controls on the left side of the steering wheel allows the driver to select vehicle information and Personal Settings. For additional information, refer to Programmable Features in this guide.
ELECTRONICS PROGRAMMABLE FEATURES Electronic Vehicle Information Center (EVIC) • The EVIC can be used to program the following Personal Settings. Press the UP or DOWN button until System Setup displays, then press the SELECT button. Scroll through the settings using the UP or DOWN buttons. Press the SELECT button to change the setting. Press the BACK button to scroll back to a previous menu or sub menu.
ELECTRONICS Before You Begin Programming HomeLink® • Be sure that your vehicle is parked outside of the garage before you begin programming. • For more efficient programming and accurate transmission of the radio-frequency signal it is recommended that a new battery be placed in the hand-held transmitter of the device that is being programmed to the HomeLink® system. • Erase all channels before you begin programming.
ELECTRONICS • Return to the vehicle and press the programmed HomeLink® button twice (holding the button for two seconds each time). If the device is plugged in and activates, programming is complete. NOTE: If the device does not activate, press the button a third time (for two seconds) to complete the training. • To program the remaining two HomeLink® buttons, repeat each step for each remaining button. DO NOT erase the channels.
ELECTRONICS POWER INVERTER • There is a 115 Volt, 150 Watt power inverter outlet located on the back of the center console. This outlet can power cellular phones, electronics and other low power devices requiring power up to 150 Watts. • Press the switch located in the switch bank on the lower instrument panel to turn the power inverter on. The indicator light will turn on to indicate the inverter is producing AC power. • Press the switch again to turn the power inverter off.
ELECTRONICS POWER OUTLET • The front power outlet is located in the front center storage bin of the instrument panel. • A second front power outlet is located inside the center console. • The rear power outlet is located in the right rear cargo area. • The power outlets are labeled with either a “key” or a “battery” symbol to indicate how the outlet is powered.
ELECTRONICS • The rear cargo power outlet can be switched to “battery” powered all the time by switching the power outlet right rear quarter panel fuse in the fuse panel.
OFF-ROAD CAPABILITIES ALL-WHEEL DRIVE OPERATION Single-Speed Operating Instructions/Precautions • This system contains a single-speed (HI range only) transfer case, which provides convenient full-time all-wheel drive. No driver interaction is required. The Brake Traction Control (BTC) System, which combines standard ABS and Traction Control, provides resistance to any wheel that is slipping to allow additional torque transfer to wheels with traction.
OFF-ROAD CAPABILITIES Shifting Procedures AWD AUTO To LOW RANGE NOTE: When shifting into or out of LOW RANGE some gear noise may be heard. This noise is normal and is not detrimental to the vehicle or occupants. • Shifting can be performed with the vehicle rolling 2 to 3 mph (3 to 5 km/h) or completely stopped. Use either of the following procedures: Preferred Procedure • With the engine running, slow the vehicle to 2 to 3 mph (3 to 5 km/h). • Shift the transmission into NEUTRAL.
UTILITY ROOF LUGGAGE RACK • The crossbars on your vehicle are delivered stowed within the roof rack side rails. When installed, the roof rack can hold a maximum of 150 lbs (68 kg) of evenly distributed weight. Installing The Crossbars • To install the crossbars, completely loosen the thumb screws at both ends and lift the crossbar from its stowed position. • Bend the pivot points at each end of the crossbar and slide the thumb screw down. • Set the crossbars into position and tighten the thumb screws.
86 RWD AWD RWD AWD 3.6L 3.6L 5.7L 5.7L 13,100 lbs (5 942 kg) 13,100 lbs (5 942 kg) 11,600 lbs (5 262 kg) GCWR (Gross Combined Wt. Rating) 11,600 lbs (5 262 kg) 40 sq ft (3.72 sq m) 40 sq ft (3.72 sq m) 60 sq ft (5.57 sq m) 60 sq ft (5.57 sq m) Frontal Area 7,200 lbs (3 266 kg) 7,200 lbs (3 266 kg) 6,200 lbs (2 812 kg) Max. GTW (Gross Trailer Wt.) 6,200 lbs (2 812 kg) 720 lbs (327 kg) 720 lbs (327 kg) 620 lbs (281 kg) Max. Trailer Tongue Wt.
UTILITY TOW/HAUL MODE • When driving in hilly areas, towing a trailer, carrying a heavy load, etc., and frequent transmission shifting occurs, press the TOW/HAUL switch to select TOW/HAUL mode. This will improve performance and reduce the potential for transmission overheating or failure due to excessive shifting. When operating in TOW/HAUL mode, transmission upshifts are delayed, and the transmission will automatically downshift (for engine braking) during steady braking maneuvers.
UTILITY • Press and hold the brake pedal and shift the transmission into NEUTRAL. • Press and hold the transfer case N (Neutral) button for four seconds, until the light next to the N symbol starts to blink, indicating shift in progress. The light will stop blinking (stay on solid) when the shift to N (Neutral) is complete. • Start the engine and shift the transmission into REVERSE. • Release the brake pedal for five seconds and ensure that there is no vehicle movement.
WHAT TO DO IN EMERGENCIES 24-HOUR TOWING ASSISTANCE • Dial toll-free 1-800-521-2779 or 1-800-363-4869 for Canadian residents. • Provide your name, vehicle identification number and license plate number. • Provide your location, including telephone number, from which you are calling. • Briefly describe the nature of the problem and answer a few simple questions. • You will be given the name of the service provider and an estimated time of arrival.
WHAT TO DO IN EMERGENCIES • When the malfunction indicator is illuminated, the system may not be able to detect or signal low tire pressure as intended. TPMS malfunctions may occur for a variety of reasons, including the installation of replacement or alternate tires or wheels on the vehicle that prevent the TPMS from functioning properly.
WHAT TO DO IN EMERGENCIES - Electronic Stability Control (ESC) Activation/Malfunction Indicator Light • If the “ESC Activation/Malfunction Indicator Light” comes on continuously with the engine running, a malfunction has been detected in the ESC system. If this light remains on after several ignition cycles, and the vehicle has been driven several miles (kilometers) at speeds greater than 30 mph (48 km/h), we recommend you drive to the nearest service center and have the vehicle serviced immediately.
WHAT TO DO IN EMERGENCIES - Air Bag Warning Light • If the light is not on during starting, stays on, or turns on while driving, have the vehicle serviced by an authorized service center immediately. Fuel Cap/Loose Gas Cap Message • If a “gas cap” message (shown as Check Gascap) appears, tighten the gas cap until a “clicking” sound is heard. • If the message continues to appear for more than three days after tightening the gas cap, have the vehicle serviced by an authorized service center immediately.
WHAT TO DO IN EMERGENCIES IF YOUR ENGINE OVERHEATS • In any of the following situations, you can reduce the potential for overheating by taking the appropriate action. • On the highways — slow down. • In city traffic — while stopped, place the transmission in NEUTRAL, but do not increase engine idle speed. NOTE: There are steps that you can take to slow down an impending overheat condition: • If your air conditioner (A/C) is on, turn it off.
WHAT TO DO IN EMERGENCIES JACKING AND TIRE CHANGING Jack Location • The scissor-type jack and tire changing tools are located in rear cargo area, below the load floor. • Rotate the plastic thumb screw on the end of the jack to remove the jack from the bracket. Spare Tire Stowage • The spare tire is stowed under the rear of the vehicle by means of a cable winch mechanism.
WHAT TO DO IN EMERGENCIES Spare Tire Removal 1. Remove the jack tools from the bag. 2. Raise the protective rubber mat covering the storage compartment floor and remove the plug to access the winch drive. 3. Fit the jack handle extension over the drive nut. Use the lug wrench handle and extension to completely lower the spare tire. Keep turning the handle until the winch STOPS. NOTE: Do not use power tools to operate the winch. 4.
WHAT TO DO IN EMERGENCIES 6. Slide the metal stamping up the steel extension tube and winch cable. Rotate the metal stamping and push it through the hole in the plastic plate and wheel. 7. Pinch the three short and two long tubes to remove the protective plate from the steel spare wheel.
WHAT TO DO IN EMERGENCIES Preparations For Jacking 1. Park the vehicle on a firm level surface, away from traffic for your safety. 2. Turn the engine off, place the transmission in PARK, fully depress the pedal to the floor to set the parking brake, and activate the Hazard Warning flashers. 3. Block both the front and rear of the wheel diagonally opposite of the jacking position. NOTE: Passengers should not remain in the vehicle when the vehicle is being jacked. Jacking Instructions 1.
WHAT TO DO IN EMERGENCIES 3. For the front axle, place the jack on the body flange just behind the front tire as indicated by the triangular lift point symbol on the sill molding. Do not raise the vehicle until you are sure the jack is fully engaged.
WHAT TO DO IN EMERGENCIES 4. For a rear tire, place the jack in the slot on the rear tie-down bracket, just forward of the rear tire (as indicated by the triangular lift point symbol on the sill molding). Do not raise the vehicle until you are sure the jack is fully engaged. 5. Raise the vehicle by turning the jack screw clockwise. Raise the vehicle just enough to remove the flat tire. 6. Remove the lug nuts and wheel. 7.
WHAT TO DO IN EMERGENCIES 10. Remove the Dodge center cap using a jack tool from inside the aluminum road wheel and snap on the protective plastic plate. NOTE: The plastic plate will prevent the road wheel from being scratched when sliding it under the vehicle. 11. Stand the wheel up against the bumper with the plastic plate facing you. 12. Slide the cable end, spring and metal tube through the wheel and plastic plate. Rotate the stamping on the cable and push it through the wheel and plastic plate.
WHAT TO DO IN EMERGENCIES 15. Reinstall the plastic plug into the floor of the cargo area. Roll up and store the Jack, Tool Kit and Tire Changing Instructions. Reinstall the cover for the jack in the rear storage bin. NOTE: The plastic thumb screw being on the right and the position of the lug wrench before the velcro straps go around the fully closed jack. 16. Remove the blocks/rocks from the opposite tire. 17.
WHAT TO DO IN EMERGENCIES WARNING! • Do not attempt to change a tire on the side of the vehicle close to moving traffic. Pull far enough off the road to avoid the danger of being hit when operating the jack or changing the wheel. • Being under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. You could be crushed. Never put any part of your body under a vehicle that is on a jack.
WHAT TO DO IN EMERGENCIES BATTERY LOCATION • The battery in your vehicle is located under the passenger's front seat. Remote battery posts are located on the right side of the engine compartment for jump-starting. JUMP-STARTING • If your vehicle has a discharged battery it can be jump-started using a set of jumper cables and a battery in another vehicle or by using a portable battery booster pack. • Jump-starting can be dangerous if done improperly so please follow the procedures in this section carefully.
WHAT TO DO IN EMERGENCIES • Start the engine in the vehicle that has the booster battery, let the engine idle a few minutes, and then start the engine in the vehicle with the discharged battery. Once the engine is started, remove the jumper cables in the reverse sequence: • Disconnect the negative (-) jumper cable from the remote negative (-) post of the vehicle with the discharged battery. Replace the protective cap.
WHAT TO DO IN EMERGENCIES WARNING! (Continued) • Do not allow vehicles to touch each other as this could establish a ground connection and personal injury could result. • Failure to follow this procedure could result in personal injury or property damage due to battery explosion. • Do not connect the cable to the negative post (-) of the discharged battery. The resulting electrical spark could cause the battery to explode and could result in personal injury.
WHAT TO DO IN EMERGENCIES SHIFT LEVER OVERRIDE • If a malfunction occurs and the shift lever cannot be moved out of the PARK position, you can use the following procedure to temporarily move the shift lever: • To access the shift lever override, remove the rubber cupholder liner to the right of the shift lever. • Firmly set the parking brake. • Turn the ignition switch to the ACC or ON position without starting the engine. • Press and maintain firm pressure on the brake pedal.
Flatbed Towing Condition Flat Tow Wheel Lift or Dolly Tow ALL Rear Wheels OFF the Ground NONE Front TOWING A DISABLED VEHICLE NO BEST METHOD • T/case in NEUTRAL • Tow in Forward direction • 15 miles (24 km) max distance OK BEST METHOD • Trans in PARK • 30 mph (48 km/h) AWD MODELS • Transmission in NEUTRAL RWD Models WHAT TO DO IN EMERGENCIES 107
WHAT TO DO IN EMERGENCIES EVENT DATA RECORDER (EDR) • This vehicle is equipped with an event data recorder (EDR). The main purpose of an EDR is to record, in certain crash or near crash-like situations, such as an air bag deployment or hitting a road obstacle, data that will assist in understanding how a vehicle’s systems performed. The EDR is designed to record data related to vehicle dynamics and safety systems for a short period of time, typically 30 seconds or less.
MAINTAINING YOUR VEHICLE OPENING THE HOOD • Pull the hood release lever located below the steering wheel at the base of the instrument panel. • Reach into the opening beneath the center of the hood and move the safety latch lever while lifting the hood at the same time. WARNING! Be sure the hood is fully latched before driving your vehicle. If the hood is not fully latched, it could open when the vehicle is in motion and block your vision.
MAINTAINING YOUR VEHICLE Fuel Door Emergency Release • To manually open the fuel door, remove the storage bin located in the left rear cargo area. • Pull the release cable located in the storage bin opening.
3.
5.
MAINTAINING YOUR VEHICLE FLUIDS AND CAPACITIES Component Engine Coolant 3.6L Engine – Without Trailer Tow Package Engine Coolant 3.6L Engine – With Trailer Tow Package Engine Coolant 3.6L Engine – Front and Rear Heat Without Trailer Tow Package Engine Coolant 3.6L Engine – Front and Rear Heat With Trailer Tow Package Engine Coolant 5.7 Liter Engine – Front and Rear Heat Without Trailer Tow Package Engine Coolant 5.7 Liter Engine – Front and Rear Heat With Trailer Tow Package Engine Oil with Filter 3.
MAINTAINING YOUR VEHICLE Component Automatic Transmission Transfer Case – 3.6L Engine Transfer Case – 5.7L Engine Axle Differential (Front/Rear) Brake Master Cylinder Power Steering Reservoir – 3.6L Engine Power Steering Reservoir – 5.7L Engine Fuel Selection 3.6L, 5.7L Fluid, Lubricant, or Genuine Capacities Part MOPAR® ATF+4® Automatic Transmission — Fluid or equivalent licensed ATF+4® product. Shell Automatic Transmission Fluid 3353 — or equivalent.
X X Replace the spark plugs (5.7L engine) X X X Replace the air conditioning filter. X Replace the engine air cleaner. Inspect front suspension, tie rod ends, and boot seals, for cracks or leaks and all parts for damage, wear, improper looseness or end play; replace if necessary. Inspect the front and rear axle fluid, change if necessary. X X Adjust the parking brake on vehicles equipped with four wheel disc brakes.
116 65,000 30 40,000 78,000 36 48,000 91,000 42 56,000 54 72,000 60 80,000 66 88,000 72 96,000 X • Refer to the Owner's Manual on the DVD for complete maintenance schedule. • * This maintenance is recommended by the manufacturer to the owner, but is not required to maintain emissions warranty. Flush and replace the engine coolant at 104,000 miles (169,000 km) or 60 months whichever comes first.
MAINTAINING YOUR VEHICLE Maintenance Record Odometer Date Signature, Authorized Service Center 8,000 Miles (13,000 km) or 6 Months 16,000 Miles (26,000 km) or 12 Months 24,000 Miles (39,000 km) or 18 Months 32,000 Miles (52,000 km) or 24 Months 40,000 Miles (65,000 km) or 30 Months 48,000 Miles (78,000 km) or 36 Months 56,000 Miles (91,000 km) or 42 Months 64,000 Miles (104,000 km) or 48 Months 72,000 Miles (117,000 km) or 54 Months 80,000 Miles (130,000 km) or 60 Months 88,000 Miles (143,000 km) or 66 M
MAINTAINING YOUR VEHICLE FUSES 118
MAINTAINING YOUR VEHICLE Integrated Power Module (fuses) • The integrated power module is located on the right side of the engine compartment. This center contains cartridge fuses and mini fuses. A description of each fuse and component may be stamped on the inside cover, otherwise the cavity number of each fuse is stamped on the inside cover that corresponds to the following chart.
MAINTAINING YOUR VEHICLE Cavity M11 M12 M13 M14 M15 M16 M18 M19 M20 M21 M22 M23 M24 M25 M26 M27 M28 M29 M30 M31 M32 M33 M34 M35 M36 M37 M38 120 Cartridge Fuse Mini Fuse 10 Amp Red Description Heating, Ventilation & Air Conditioning (Climate Control System) 30 Amp Green Radio/Amplifier 20 Amp Yellow Instrument Cluster/Ignition Module 20 Amp Yellow Back Up Camera 20 Amp Yellow Power Seat Module(s)/Adaptive Cruise Control/Audio Telematics/ Daytime Running Lights Relay/Instrument Cluster 10 Amp Red Occu
MAINTAINING YOUR VEHICLE CAUTION! • When installing the integrated power module cover, it is important to ensure the cover is properly positioned and fully latched. Failure to do so may allow water to get into the integrated power module and possibly result in a electrical system failure. • When replacing a blown fuse, it is important to use only a fuse having the correct amperage rating. The use of a fuse with a rating other than indicated may result in a dangerous electrical system overload.
MAINTAINING YOUR VEHICLE WHEEL AND WHEEL TRIM CARE • All wheels and wheel trim, especially aluminum and chrome plated wheels, should be cleaned regularly with a mild soap and water to prevent corrosion. • To remove heavy soil and/or excessive brake dust, use MOPAR® Wheel Cleaner or equivalent or select a non-abrasive, non-acidic cleaner. CAUTION! Do not use scouring pads, steel wool, a bristle brush, or metal polishes. Do not use oven cleaner. These products may damage the wheel's protective finish.
CONSUMER ASSISTANCE CHRYSLER GROUP LLC CUSTOMER CENTER P.O. Box 21–8004 Auburn Hills, MI 48321–8004 Phone: 1–800–423–6343 CHRYSLER CANADA INC. CUSTOMER CENTER P.O. Box 1621 Windsor, Ontario N9A 4H6 Phone: 1–800–465–2001 (English) Phone: 1–800–387–9983 (French) ASSISTANCE FOR THE HEARING IMPAIRED • To assist customers who have hearing difficulties, the manufacturer has installed special TDD (Telecommunication Devices for the Deaf) equipment at its customer center.
CONSUMER ASSISTANCE NOTE: • The Owner's Manual and User Guide electronic files are also available on the Chrysler, Jeep, Ram Truck and Dodge websites. • Click on the "For Owners" tab, select "Owner/Service Manuals", then select your desired model year and vehicle from the drop down lists. REPORTING SAFETY DEFECTS IN THE 50 UNITED STATES AND WASHINGTON, D.C.
MOPAR ACCESSORIES AUTHENTIC ACCESSORIES BY MOPAR® • The following highlights just some of the many Authentic Dodge Accessories by Mopar featuring a fit, finish, and functionality specifically for your Dodge Durango. • In choosing Authentic Accessories you gain far more than expressive style, premium protection, or extreme entertainment, you also benefit from enhancing your vehicle with accessories that have been thoroughly tested and factoryapproved.
INDEX Adaptive Cruise Control (ACC) (Cruise Control) . . . . . . . . . . . . . . . . . 30 Air Conditioning . . . . . . . . . . . . 35 Airbag . . . . . . . . . . . . . . . . . . 15 Airbag Light . . . . . . . . . . . . . . . 92 Alarm, Panic . . . . . . . . . . . . . . . 8 All Wheel Drive (AWD) . . . . . . . . . 83 Anti-Lock Brake System (ABS) . . . . 91 Arming Theft System (Security Alarm) . . . . . . . . . . . . 14 Audio Settings . . . 42,43,44,46,49,58 Automatic Dimming Mirror . . . . . .
INDEX Fluid Capacities . . . . . . . . . . . . 113 Fluids . . . . . . . . . . . . . . . . . 113 Fog Lights . . . . . . . . . . . . . . . . 27 Folding Front Passenger Seat . . . . . 21 Folding Power Third Row Head Restraints . . . . . . . . . . . . . . . . 23 Folding Rear Seat . . . . . . . . . 22,23 Four Wheel Drive . . . . . . . . . . . . 83 Operation . . . . . . . . . . . . . . . 83 Systems . . . . . . . . . . . . . . . . 83 Four Wheel Drive Operation . . . . . . 83 Front Heated Seats . . . . . . . . . .
INDEX Overheating, Engine . . . . . . . . . . 93 Panic Alarm . . . . . . . . . . . . . . . 8 Park Sense Sensors, Cleaning . . . . 37 Park Sense System, Rear . . . . . . . 37 Phone (Pairing) . . . . . . . . . . . . . 70 Phone (Uconnect) . . . . . . . . . . . 70 Pinch Protection Feature . . . . . . . 39 Placard, Tire and Loading Information . . . . . . . . . . . . . . 121 Power Folding Third Row Head Restraints . . . . . . . . . . . . . . . 23 Glass Sunroof . . . . . . . . . . . . 38 Inverter . . . . . . . .
INDEX Changing . . . . . . . . . . . . . . . 94 Jacking . . . . . . . . . . . . . . . . 94 Pressure Warning Light . . . . . . . 89 Spare Tire . . . . . . . . . . . . . . . 94 Tow Hooks, Emergency . . . . . . . . 105 Tow/Haul . . . . . . . . . . . . . . . . 87 Towing . . . . . . . . . . . . . . . . . . 86 24-Hour Towing Assistance . . . . . 89 Disabled Vehicle . . . . . . . . . . 107 Recreational . . . . . . . . . . . . . 87 Towing Vehicle Behind a Motorhome . . . . . . . . . . . . . . .
FAQ (How To?) FREQUENTLY ASKED QUESTIONS GETTING STARTED • How do I install my LATCH Equipped Child Seat? pg. 16 • How do I program my Front Seat Memory? pg. 19 OPERATING YOUR VEHICLE • How does the Electronic Range Select (ERS) operate? pg. 34 ELECTRONICS • Which radio is in my vehicle? pg. 42, 44, 46, 55 • How do I activate the Audio Jack? pg. 43, 46, 49, 58 • How do I set the clock on my radio? pg. 42, 44, 47, 56 • How do I use the Navigation feature? pg.
NOTES 131
NOTES 132
NOTES 133
NOTES 134
NOTES 135
NOTES 136
If you are the first registered retail owner of your vehicle, you may obtain a complimentary printed copy of the Owner’s Manual, Navigation/Media Center Manuals or Warranty Booklet by calling 1-800-423-6343 (U.S.) or 1-800-387-1143 (Canada) or by contacting your dealer. The driver’s primary responsibility is the safe operation of the vehicle. Driving while distracted can result in loss of vehicle control, resulting in a collision and personal injury.
12WD01-926-AA-R1 Durango Third Edition User Guide Get the free mobile app for your phone http://gettag.mobi Download a free Vehicle Information App by visiting your application store, Keyword (Dodge), or scanning the Microsoft Tag. To put Microsoft Tags to work for you, use your mobile phone’s browser or App store to download a Microsoft Tag reader, like the free one at www.gettag.mobi. Then follow the directions to scan the code.
