User guide

Washer Operation

• Rotate the center portion of the lever past the second detent to activate the rear

washer.

High Beam Operation

• Push the lever forward to activate the high beams. Pull the lever toward you for

flash to pass.

NOTE: For safe driving, turn off high beams when oncoming traffic is present to

prevent headlight glare and as a courtesy to other motorists.

AUTO DIMMING MIRRORS

• The rearview and driver side exterior mirror automatically adjusts for headlight

glare from vehicles behind you.

• You can turn the feature on or off by pressing the button at the base of the

rearview mirror. A light next to the button will illuminate to indicate when the

dimming feature is activated.

SPEED CONTROL

• The speed control switches are located

on the steering wheel.

Cruise ON/OFF

• Push the ON/OFF button to activate

the Speed Control.

• CRUISE READY

will appear on the

instrument cluster to indicate the

Speed Control is on.

• Push the ON/OFF button a second time

to turn the system off.

Set

• With the Speed Control on, push and

release the SET – button to set a

desired speed.

Accel/Decel

• Once a speed is set, pushing the RES + button once or the SET – button once will

increase or decrease the set speed approximately 1 mph (2 km/h).

• Push and hold the RES + button to accelerate in 5mph (8 km/h) increments or

push and hold the SET – button to decelerate in 5mph (8 km/h) increments;

release the button to save the new set speed.

Resume

• To resume a previously selected set speed in memory, push the RES + button and

release.

OPERA TING YOUR VEHICLE