2012 OWNER’S MANUAL Challenger SRT8
VEHICLES SOLD IN CANADA With respect to any Vehicles Sold in Canada, the name Chrysler Group LLC shall be deemed to be deleted and the name Chrysler Canada Inc. used in substitution therefore. DRIVING AND ALCOHOL Drunken driving is one of the most frequent causes of accidents. Your driving ability can be seriously impaired with blood alcohol levels far below the legal minimum. If you are drinking, don’t drive. Ride with a designated non-drinking driver, call a cab, a friend, or use public transportation.
SECTION TABLE OF CONTENTS PAGE 1 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1 2 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 2 3 UNDERSTANDING THE FEATURES OF YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 3 4 UNDERSTANDING YOUR INSTRUMENT PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INTRODUCTION 1 CONTENTS 䡵 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 䡵 Vehicle Identification Number .............. 6 䡵 How To Use This Manual . . . . . . . . . . . . . . . . . . 4 䡵 Vehicle Modifications/Alterations . . . . . . . . . . . . 7 䡵 Warnings And Cautions . . . . . . . . . . . . . . . . . . .
4 INTRODUCTION INTRODUCTION Congratulations on selecting your new Chrysler Group LLC vehicle. Be assured that it represents precision workmanship, distinctive styling, and high quality - all essentials that are traditional to our vehicles. This Owner’s Manual has been prepared with the assistance of service and engineering specialists to acquaint you with the operation and maintenance of your vehicle. It is supplemented by Warranty Information, and various customer-oriented documents.
INTRODUCTION 5
6 INTRODUCTION WARNINGS AND CAUTIONS This Owner’s Manual contains WARNINGS against operating procedures that could result in a collision or bodily injury. It also contains CAUTIONS against procedures that could result in damage to your vehicle. If you do not read this entire manual, you may miss important information. Observe all Warnings and Cautions.
INTRODUCTION 7 VEHICLE MODIFICATIONS/ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to a accident resulting in serious injury or death. NOTE: It is illegal to remove or alter the VIN.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2 CONTENTS 䡵 A Word About Your Keys . . . . . . . . . . . . . . . . . 12 䡵 Vehicle Security Alarm . . . . . . . . . . . . . . . . . . . 18 ▫ Wireless Ignition Node (WIN) . . . . . . . . . . . . 12 ▫ Rearming Of The System . . . . . . . . . . . . . . . . 19 ▫ Key Fob . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 ▫ To Arm The System . . . . . . . . . . . . . . . . . . . 19 ▫ Removing Key Fob From Ignition . . . . . . . . . .
10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ▫ Using The Panic Alarm . . . . . . . . . . . . . . . . . 25 䡵 Trunk Lock And Release ▫ Programming Additional Transmitters . . . . . . 26 䡵 Trunk Safety Warning . . . . . . . . . . . . . . . . . . . 41 ▫ Transmitter Battery Replacement . . . . . . . . . . 26 ▫ Trunk Emergency Release . . . . . . . . . . . . . . . 42 ▫ General Information . . . . . . . . . . . . . . . . . . . 27 䡵 Occupant Restraints . . . . . . . . . . . . . . . . . . . . .
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11 ▫ Seat Belt Extender . . . . . . . . . . . . . . . . . . . . . 55 䡵 Safety Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 ▫ Supplemental Restraint System (SRS) — Air Bags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 ▫ Transporting Passengers . . . . . . . . . . . . . . . . 80 ▫ Air Bag Deployment Sensors And Controls . . . 62 ▫ Event Data Recorder (EDR) . . . . . . . . . . . . . . 69 ▫ Child Restraints . . . . . . . . . . .
12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS Your vehicle uses a keyless ignition system. This system consists of a Key Fob with Remote Keyless Entry (RKE) transmitter and a Wireless Ignition Node (WIN) with integral ignition switch. You can insert the Key Fob into the ignition switch with either side up. Wireless Ignition Node (WIN) The Wireless Ignition Node (WIN) operates similar to an ignition switch.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 Key Fob The Key Fob operates the ignition switch. Insert the square end of the key fob into the ignition switch located on the instrument panel and rotate to the desired position. It also contains the Remote Keyless Entry (RKE) transmitter and an emergency key, which stores in the rear of the Key Fob.
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To remove the emergency key, slide the mechanical latch Removing Key Fob From Ignition at the top of the Key Fob sideways with your thumb and Place the shift lever in PARK. Turn the Key Fob to the OFF position and then remove the Key Fob. then pull the key out with your other hand. With the Keyless Enter-N-Go system, the EVIC will display the ignition switch position “OFF/ACC/RUN”.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15 CAUTION! WARNING! (Continued) • If your vehicle battery becomes low or dead, your Key Fob will become locked in the ignition. • Do not attempt to remove the Key Fob while in this condition, damage could occur to the Key Fob or ignition module. Only remove the emergency key for locking and unlocking the doors. • Leave the Key Fob in the ignition and either: • Jump Start the vehicle. • Charge the battery.
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CAUTION! An unlocked car is an invitation to thieves. Always remove the Key Fob from vehicle, cycle the ignition OFF with Keyless Enter-N-Go, and lock all doors when leaving the vehicle unattended. will cause the reminder chime to sound. Refer to “Starting Procedures” in “Starting And Operating” for further information. SENTRY KEY姞 The Sentry Key威 Immobilizer System prevents unauthorized vehicle operation by disabling the engine.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17 seconds for a bulb check. If the light remains on after the Replacement Keys bulb check, it indicates that there is a problem with the NOTE: Only Key Fobs that are programmed to the electronics. This condition will result in the engine being vehicle electronics can be used to start and operate the shut off after two seconds. vehicle.
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Duplication of Key Fobs may be performed at an autho- • This device must accept any interference that may be rized dealer, this procedure consists of programming a received, including interference that may cause undeblank Key Fob to the vehicle electronics. A blank Key Fob sired operation. is one that has never been programmed.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 Rearming Of The System If something triggers the alarm, and no action is taken to disarm it, the Vehicle Security Alarm will turn the horn off after three minutes, turn all of the visual signals off after an additional 15 minutes, and then the Vehicle Security Alarm will rearm itself. 2. Perform one of the following methods to lock the vehicle: • Press LOCK on the interior power door lock switch with the driver and/or passenger door open.
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: The driver’s door key cylinder and the trunk To Disarm The System The Vehicle Security Alarm can be disarmed using any of button on the RKE transmitter cannot arm or disarm the Vehicle Security Alarm. the following methods: • Press the UNLOCK button on the Remote Keyless • The Vehicle Security Alarm remains armed during Entry (RKE) transmitter. trunk entry. Pressing the trunk button will not disarm the Vehicle Security Alarm.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 • If the Vehicle Security Alarm is armed and the battery becomes disconnected, the Vehicle Security Alarm will remain armed when the battery is reconnected; the exterior lights will flash, the horn will sound. If this occurs, disarm the Vehicle Security Alarm. The lights will fade to off after approximately 30 seconds or they will immediately fade to off once the ignition switch is turned to ON/RUN from the OFF position.
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: Inserting the Key Fob with RKE transmitter into the ignition switch disables the system from responding to any button presses from that RKE transmitter. Driving at speeds 5 mph (8 km/h) and above disables the system from responding to all RKE transmitter buttons for all RKE transmitters. To Unlock The Doors Press and release the UNLOCK button on the RKE transmitter once to unlock the driver’s door or twice within five seconds, to unlock both doors.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 • When not using the EVIC, perform the following activated will cause the alarm to sound. Press the UNsteps: LOCK button to deactivate the Security Alarm. 1. Press and hold the LOCK button on a programmed RKE transmitter for at least 4 seconds, but no longer than 10 seconds. Then, press and hold the UNLOCK button while still holding the LOCK button.
24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. Test the feature while outside of the vehicle by pressing the LOCK/UNLOCK buttons on the RKE transmitter with the ignition switch in the OFF position and the Key Fob removed. To Lock The Doors Press and release the LOCK button on the RKE transmitter to lock both doors. The turn signal lights will flash and the horn will chirp to acknowledge the signal. 4.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 • When not using the EVIC, perform the following Alarm. Opening a door with the Security Alarm activated steps: will cause the alarm to sound. Press the UNLOCK button to deactivate the Security Alarm. 1. Press the LOCK button on a programmed RKE transmitter for at least 4 seconds, but no longer than 10 sec- To Open The Trunk onds.
26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The Panic Alarm will stay on for three minutes unless Transmitter Battery Replacement you turn it off by either pressing the PANIC button a The recommended replacement battery is CR2032. second time or drive the vehicle at a speed of 5 mph NOTE: Perchlorate Material – special handling may (24 km/h) or greater. apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate NOTE: 1.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27 3. To reassemble the RKE transmitter case, snap the two halves of the case together. Make sure there is an even “gap” between the two halves. If equipped, install and tighten the screw until snug. Test RKE transmitter operation. If your RKE transmitter fails to operate from a normal distance, check for these two conditions: 1. A weak battery in the transmitter. The expected life of the battery is a minimum of three years. 2.
28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE How To Use Remote Start All of the following conditions must be met before the engine will remote start: • Shift lever in PARK • Doors closed • Hood closed • Hazard switch off • Brake switch inactive (brake pedal not pressed) • Ignition key removed from ignition switch WARNING! • Do not start or run an engine in a closed garage or confined area. Exhaust gas contains Carbon Monoxide (CO) which is odorless and colorless.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29 programmed). Then, the engine will start and the vehicle To Exit Remote Start Mode Without Driving The will remain in the Remote Start mode for a 15-minute Vehicle cycle. • Press and release the REMOTE START button one time or allow the engine to run for the entire 15-minute NOTE: • If an engine fault is present the vehicle will start and cycle. then shut down 10 seconds later.
30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: Cancel Remote Start • For vehicles not equipped with the Keyless Enter- Remote Starting will also cancel if any of the following N-Go feature, the ignition switch must be in the occur: ON/RUN position in order to drive the vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 WARNING! Door Lock Knob If the door lock knob is down when you shut the door, the door will lock. Therefore, make sure the Key Fob is not inside the vehicle before closing the door. • For personal security and safety in the event of an accident, lock the vehicle doors before you drive as well as when you park and leave the vehicle. • When leaving the vehicle, always remove the Key Fob from the ignition and lock your vehicle.
32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) • Do not leave the key fob in or near the vehicle, and do not leave a vehicle equipped with Keyless Enter-N-Go in the ACC or ON/RUN mode. A child could operate power windows, other controls, or move the vehicle. Power Door Locks The power door lock switch is located on each door trim panel. Use this switch to lock or unlock the doors.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 locks will not operate. This prevents you from accidentally locking the Key Fob in the vehicle. Removing the Key Fob or closing the door will allow the locks to operate. If a door is open, the Key Fob is in the ignition, and the ignition is in the OFF or ACC position, a chime will sound as a reminder to remove the Key Fob. Automatic Door Locks — If Equipped The auto door lock feature default condition is disabled.
34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. Place the Key Fob in the ignition switch. KEYLESS ENTER-N-GO The Passive Entry system is an enhancement to the 3. Within 15 seconds, cycle the ignition switch between vehicle’s Remote Keyless Entry (RKE) system and a OFF and ON/RUN and then back to OFF four times feature of Keyless Enter-N-Go. This feature allows you to ending up in the LOCK position. However, do not start lock and unlock the vehicle’s door(s) without having to the engine.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 • If wearing gloves on your hands, or if it has been raining on the Passive Entry door handle, the unlock sensitivity can be affected, resulting in a slower response time. • If you unlock the doors using the Passive Entry door handles, but do NOT pull the handle, the doors will automatically lock after 60 seconds. To Unlock From The Driver’s Side: With a valid Passive Entry RKE transmitter within 5 ft (1.
36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If one of the vehicle doors is open and the door panel switch is used to lock the vehicle, once all open doors have been closed the vehicle checks the inside and outside of the vehicle for any valid Passive Entry RKE transmitters.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37 To Lock The Vehicle’s Doors With one of the vehicle’s Passive Entry RKE transmitters within 5 ft (1.5 m) of the driver or passenger front door handles, press the door handle LOCK button to lock both doors.
38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: • After pressing the door handle LOCK button, you must wait two seconds before you can lock or unlock the doors, using either Passive Entry door handle. This is done to allow you to check if the vehicle is locked by pulling the door handle, without the vehicle reacting and unlocking. • The Passive Entry system will not operate if the RKE transmitter battery is dead.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39 NOTE: WARNING! • The Key Off Power Delay feature will allow the power windows to operate for up to 60 minutes after the Never leave children in a vehicle with the key in the ignition is turned OFF. This feature is cancelled when ignition switch. Occupants, particularly unattended either front door is opened. The time for this feature is children, can become entrapped by the windows programmable.
40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The power window switches will remain active for up to 60 minutes after the ignition switch is turned OFF. Opening either door will cancel this feature. The time for this feature is programmable. Refer to “Electronic Vehicle Information Center (EVIC)/Personal Settings (CustomerProgrammable Features)” in “Understanding Your Instrument Panel” for further information.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41 feature will function only when the vehicle is in the TRUNK SAFETY WARNING unlock condition. With the ignition switch in the ON/RUN position, the Trunk Open symbol will display in the instrument cluster indicating that the trunk is open. The odometer display will reappear once the trunk is closed. With the ignition switch in the OFF position or the key removed from the ignition switch, the Trunk Open symbol will display until the trunk is closed.
42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Trunk Emergency Release As a security measure, a Trunk Internal Emergency Release lever is built into the trunk latching mechanism. In the event of an individual being locked inside the trunk, the trunk can be simply opened by pulling on the glow-in-the-dark handle attached to the trunk latching mechanism.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 • Front seat belts incorporate pretensioners that may NOTE: The Advanced Front Air Bags have a multistage enhance occupant protection by managing occupant inflator design. This allows the air bag to have different rates of inflation based on the severity and type of energy during an impact event collision.
44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE secured in the rear seat in child restraints or beltpositioning booster seats. Older children who do not use child restraints or belt-positioning booster seats should ride properly buckled up in the rear seat. Never allow children to slide the shoulder belt behind them or under their arm. 4. Do not lean against the door or window.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45 WARNING! (Continued) • Being too close to the steering wheel or instrument panel during Advanced Front Air Bag deployment could cause serious injury, including death. Air Bags need room to inflate. Sit back, comfortably extending your arms to reach the steering wheel or instrument panel. • Supplemental Side Air Bag Inflatable Curtain (SABIC) and Seat-Mounted Side Air Bags (SAB) also need room to inflate. Do not lean against the door or window.
46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Lap/Shoulder Belts All seating positions in your vehicle are equipped with lap/shoulder belts. The belt webbing retractor is designed to lock during very sudden stops or impacts. This feature allows the shoulder part of the belt to move freely with you under normal conditions. However, in an accident, the belt will lock and reduce your risk of striking the inside of the vehicle or being thrown out.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47 WARNING! (Continued) • Two people should never be belted into a single seat belt. People belted together can crash into one another in an accident, hurting one another badly. Never use a lap/shoulder belt or a lap belt for more than one person, no matter what their size. 2 Lap/Shoulder Belt Operating Instructions 1. Enter the vehicle and close the door. Sit back and adjust the front seat. 2.
48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” WARNING! • A belt that is buckled into the wrong buckle will not protect you properly. The lap portion could ride too high on your body, possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • A belt that is too loose will not protect you properly.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49 WARNING! (Continued) • A belt that is worn under your arm is dangerous. Your body could strike the inside surfaces of the vehicle in an accident, increasing head and neck injury. A belt worn under the arm can cause internal injuries. Ribs are not as strong as shoulder bones. Wear the belt over your shoulder so that your strongest bones will take the force in a collision. • A shoulder belt placed behind you will not protect you from injury during an accident.
50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 5. Position the shoulder belt on your chest so that it is 6. To release the belt, push the red button on the buckle. comfortable and not resting on your neck. The retractor The belt will automatically retract to its stowed position. will withdraw any slack in the belt. If necessary, slide the latch plate down the webbing to allow the belt to retract fully. WARNING! A frayed or torn belt could rip apart in an accident and leave you with no protection.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 additional information, refer to “Installing Child ReLap/Shoulder Belt Untwisting Procedure Use the following procedure to untwist a twisted lap/ straints Using The Vehicle Seat Belt” under the “Child Restraints” section. The chart below defines the type of shoulder belt. feature for each seating position. 1. Position the latch plate as close as possible to the Driver Center Passenger anchor point. First Row N/A N/A ALR 2.
52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE out only the amount of webbing necessary to comfort- 3. Allow the belt to retract. As the belt retracts, you will ably wrap around the occupant’s mid-section. Slide the hear a clicking sound. This indicates the safety belt is now in the Automatic Locking Mode. latch plate into the buckle until you hear a ⬙click.⬙ Automatic Locking Retractor Mode (ALR) — If Equipped In this mode, the shoulder belt is automatically prelocked.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 Energy Management Feature This vehicle has a safety belt system with an Energy Management feature in the front seating positions to help further reduce the risk of injury in the event of a head-on accident. This safety belt system has a retractor assembly that is designed to release webbing in a controlled manner. This feature is designed to help reduce the belt force acting on the occupant’s chest.
54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Enhanced Seat Belt Use Reminder System (BeltAlert姞) BeltAlert威 is a feature intended to remind the driver and front passenger (if equipped with front passenger BeltAlert威) to fasten their seat belts. The feature is active whenever the ignition is on. If the driver or front seat passenger is unbelted, the Seat Belt Reminder Light will turn on and remain on until both front seat belts are fastened.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 Seat Belts And Pregnant Women We recommend that pregnant women use the seat belts throughout their pregnancy. Keeping the mother safe is the best way to keep the baby safe. Seat Belt Extender If a seat belt is too short even when fully extended your authorized dealer can provide you with a seat belt extender. This extender should be used only if the existing belt is not long enough.
56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Supplemental Restraint System (SRS) — Air Bags This vehicle has Advanced Front Air Bags for both the driver and front passenger as a supplement to the seat belt restraint systems. The driver’s Advanced Front Air Bag is mounted in the center of the steering wheel. The passenger’s Advanced Front Air Bag is mounted in the instrument panel, above the glove compartment. The words SRS AIRBAG are embossed on the air bag covers.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57 The Advanced Front Air Bags have a multistage inflator This vehicle is equipped with Supplemental Side Air Bag design. This allows the air bag to have different rates of Inflatable Curtains (SABIC) to protect the driver, front, and rear passengers sitting next to a window. The SABIC inflation based on the severity and type of collision.
58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Instrument Panel • Knee Impact Bolster • Driver Advanced Front Air Bag • Passenger Advanced Front Air Bag • Supplemental Seat-Mounted Side Air Bags (SAB) Advanced Front Air Bag Features The Advanced Front Air Bag system has multistage driver and front passenger air bags.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59 WARNING! • No objects should be placed over or near the air bag on the instrument panel, because any such objects could cause harm if the vehicle is in a collision severe enough to cause the air bag to inflate. • Do not put anything on or around the air bag covers or attempt to open them manually. You may damage the air bags and you could be injured because the air bags may no longer be functional.
60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE When the air bag deploys, it opens the seam between the front and side of the seat’s trim cover. Each air bag deploys independently; a left side impact deploys the left air bag only and a right-side impact deploys the right air bag only. Supplemental Side Air Bag Inflatable Curtain (SABIC) SABIC air bags may offer side-impact protection to front and rear seat outboard occupants in addition to that provided by the body structure.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 61 The system includes side impact sensors that are calibrated to deploy the side air bags during impacts that require air bag occupant protection. WARNING! • If your vehicle is equipped with left and right Supplemental Side Air Bag Inflatable Curtain (SABIC), do not stack luggage or other cargo up high enough to block the location of the SABIC. The area where the SABIC is located should remain free from any obstructions.
62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Along with seat belts and pretensioners, Advanced Front Air Bags work with the knee bolsters to provide improved protection for the driver and front passenger. Side air bags also work with seat belts to improve occupant protection. Air Bag Deployment Sensors And Controls Advanced Front Air Bags are designed to provide additional protection by supplementing the seat belts in certain frontal collisions depending on the severity and type of collision.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 63 Also, the ORC turns on the Air Bag Warning Light in the instrument panel for approximately four to eight seconds for a self-check when the ignition is first turned on. After the self-check, the Air Bag Warning Light will turn off.
64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! Ignoring the Air Bag Warning Light in your instrument panel could mean you won’t have the air bags to protect you in a collision. If the light does not come on as a bulb check when the ignition is first turned on, stays on after you start the vehicle, or if it comes on as you drive, have an authorized dealer service the air bag system immediately.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 65 Based on the severity and type of collision, the side air bag inflator on the crash side of the vehicle may be triggered, releasing a quantity of non-toxic gas. The inflating SAB exits through the seat seam into the space between the occupant and the door. The SAB fully inflate in about 10 milliseconds.
66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Enhanced Accident Response System In the event of an impact causing air bag deployment, if the communication network remains intact, and the power remains intact, depending on the nature of the event the ORC will determine whether to have the Enhanced Accident Response System perform the following functions: • • • • NOTE: Front and/or side air bags will not deploy in all collisions. This does not mean something is wrong with the air bag system.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 67 bag inflation. These airborne particles may irritate the Maintaining Your Air Bag System skin, eyes, nose, or throat. If you have skin or eye WARNING! irritation, rinse the area with cool water. For nose or throat irritation, move to fresh air. If the irritation • Modifications to any part of the air bag system continues, see your doctor. If these particles settle on could cause it to fail when you need it.
68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) • Do not attempt to modify any part of your air bag system. The air bag may inflate accidentally or may not function properly if modifications are made. Take your vehicle to an authorized dealer for any air bag system service. If your seat including your trim cover and cushion needs to be serviced in any way (including removal or loosening/tightening of seat attachment bolts), take the vehicle to your authorized dealer.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 69 NOTE: If the speedometer, tachometer, or any engine related gauges are not working, the Occupant Restraint Controller (ORC) may also be disabled. The air bags may not be ready to inflate for your protection. Promptly check the fuse block for blown fuses. Refer to the label located on the inside of the fuse block cover for the proper air bag fuses. See your authorized dealer if the fuse is good.
70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To read data recorded by an EDR, special equipment is required, and access to the vehicle or the EDR is needed. In addition to the vehicle manufacturer, other parties, such as law enforcement, that have the special equipment, can read the information if they have access to the vehicle or the EDR. WARNING! In a collision, an unrestrained child, even a tiny baby, can become a projectile inside the vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 71 held in the vehicle by the lap/shoulder belt or the Infants And Child Restraints Safety experts recommend that children ride rearward- LATCH child restraint anchor system. Refer to “Lower facing in the vehicle until they are two years old or until Anchors and Tether for CHildren (LATCH)”. they reach either the height or weight limit of their rear WARNING! facing child safety seat.
72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE remain in a forward-facing child seat with a harness for as long as possible, up to the highest weight or height allowed by the child seat. These child seats are also held in the vehicle by the lap/shoulder belt or the LATCH child restraint anchorage system. Refer to “Lower Anchors and Tether for CHildren (LATCH)”. over the front of the seat when their back is against the seatback should use the lap/shoulder belt in a rear seat.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 73 WARNING! • Improper installation can lead to failure of an infant or child restraint. It could come loose in a collision. The child could be badly injured or killed. Follow the manufacturer’s directions exactly when installing an infant or child restraint. • A rearward-facing child restraint should only be used in a rear seat.
74 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Lower Anchors and Tether for CHildren (LATCH) Your vehicle’s rear seat is equipped with the child restraint anchorage system called LATCH. The LATCH system provides for the installation of the child restraint without using the vehicle’s seat belts, instead securing the child restraint using lower anchorages and upper tether straps from the child restraint to the vehicle structure. kits or retrofit kits.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 75 Again, carefully follow the installation instructions that are provided with the child restraint system. The rear seat lower anchorages are round bars located at the rear of the seat cushion where it meets the seatback and are just visible when you lean into the rear seat to install the child restraint. You will easily feel them if you run your finger along the intersection of the seatback and seat cushion surfaces.
76 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE means of adjusting the tension in the strap. Forward- NOTE: facing toddler restraints and some rear-facing infant • Ensure that the tether strap does not slip into the opening between the seatbacks as you remove slack in restraints will also be equipped with a tether strap, a the strap. hook for attachment to the tether strap anchorage and a means of adjusting the tension of the strap.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 77 WARNING! Improper installation of a child restraint to the LATCH anchorages can lead to failure of an infant or child restraint. The child could be badly injured or killed. Follow the manufacturer’s directions exactly when installing an infant or child restraint.
78 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To attach a child restraint tether strap: 2. Route the tether strap to provide the most direct path for the strap between the anchor and the child seat. 1. Rotate the cover over the anchor directly behind the seat where you are placing the child restraint. 3. Attach the tether strap hook (A) of the child restraint to the anchor (B) and remove slack in the tether strap according to the child restraint manufacturer’s instructions.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 79 The engine oil, transmission fluid, and axle lubricant installed at the factory is high-quality and energyconserving. Oil, fluid, and lubricant changes should be consistent with anticipated climate and conditions under which vehicle operations will occur. For the recommended viscosity and quality grades, refer to “MaintePets should be restrained in the rear seat in pet harnesses nance Procedures” in “Maintaining Your Vehicle”.
80 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE SAFETY TIPS Exhaust Gas Transporting Passengers NEVER TRANSPORT PASSENGERS IN THE CARGO AREA. WARNING! • Do not leave children or animals inside parked vehicles in hot weather. Interior heat build-up may cause serious injury or death. • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 81 If you are required to drive with the trunk/liftgate open, Safety Checks You Should Make Inside The make sure that all windows are closed and the climate Vehicle control BLOWER switch is set at high speed. DO NOT Seat Belts use the recirculation mode. Inspect the belt system periodically, checking for cuts, The best protection against carbon monoxide entry into frays, and loose parts.
82 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Defroster Check operation by selecting the defrost mode and place the blower control on high speed. You should be able to feel the air directed against the windshield. See your authorized dealer for service if your defroster is inoperable. Floor Mat Safety Information Always use floor mats designed to fit the footwell of your vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 83 WARNING! (Continued) • Always make sure that objects cannot fall into the driver footwell while the vehicle is moving. Objects can become trapped under the brake pedal and accelerator pedal causing a loss of vehicle control. • If required, mounting posts must be properly installed, if not equipped from the factory.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS 䡵 Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 䡵 Uconnect™ Phone — If Equipped . . . . . . . . . . . 94 ▫ Automatic Dimming Mirror . . . . . . . . . . . . . . 90 ▫ Operation . . . . . . . . . . . . . . . . . . . . . . . . . . 96 ▫ Outside Mirrors . . . . . . . . . . . . . . . . . . . . . . 91 ▫ Phone Call Features . . . . . . . . . . . . . . . . . . 103 ▫ Outside Mirrors Folding Feature . . . . . . . . . .
86 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 䡵 Voice Command — If Equipped . . . . . . . . . . . 123 䡵 Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140 ▫ Voice Command System Operation . . . . . . . . 123 ▫ Headlights And Parking Lights . . . . . . . . . . 140 ▫ Commands . . . . . . . . . . . . . . . . . . . . . . . . 124 ▫ Automatic Headlights . . . . . . . . . . . . . . . . . 141 ▫ Voice Training . . . . . . . . . . . . . . . . . . . . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 87 ▫ Flash-To-Pass . . . . . . . . . . . . . . . . . . . . . . . 144 ▫ To Set A Desired Speed . . . . . . . . . . . . . . . . 152 ▫ Map/Reading Lights . . . . . . . . . . . . . . . . . . 144 ▫ To Deactivate . . . . . . . . . . . . . . . . . . . . . . . 152 ▫ Interior Lights . . . . . . . . . . . . . . . . . . . . . . 145 ▫ To Resume Speed . . . . . . . . . . . . . . . . . . . . 153 䡵 Windshield Wipers And Washers . . . . . . . . . .
88 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Parksense威 System Usage Precautions . . . . . . 159 ▫ General Information . . . . . . . . . . . . . . . . . . 171 䡵 Overhead Console . . . . . . . . . . . . . . . . . . . . . 162 䡵 Power Sunroof — If Equipped . . . . . . . . . . . . 171 ▫ Courtesy/Reading Lights . . . . . . . . . . . . . . 162 ▫ Opening Sunroof — Express Mode . . . . . . . . 172 ▫ Sunglasses Storage . . . . . . . . . . . . . . . . . . . 163 ▫ Opening Sunroof — Manual Mode . . . . . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 89 䡵 Electrical Power Outlets . . . . . . . . . . . . . . . . . 174 ▫ Console Storage . . . . . . . . . . . . . . . . . . . . . 179 䡵 Cupholders . . . . . . . . . . . . . . . . . . . . . . . . . . 178 䡵 Rear Window Features . . . . . . . . . . . . . . . . . . 181 ▫ Front Cupholders . . . . . . . . . . . . . . . . . . . . 178 ▫ Rear Cupholders . . . . . . . . . . . . . . . . . . . . . 178 䡵 Console Features . . . . . . . . . . . . . . . . . . . . . .
90 UNDERSTANDING THE FEATURES OF YOUR VEHICLE MIRRORS Automatic Dimming Mirror This mirror automatically adjusts for headlight glare from vehicles behind you. You can turn the feature on or off by pressing the button at the base of the mirror. A light to the left of the button will illuminate to indicate when the dimming feature is activated. The sensor to the right of the button does not illuminate.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 91 Outside Mirrors To receive maximum benefit, adjust the outside mirror(s) to center on the adjacent lane of traffic and a slight overlap of the view obtained from the inside mirror. NOTE: The passenger side convex outside mirror will give a much wider view to the rear, and especially of the lane next to your vehicle. Outside Mirrors Folding Feature The mirrors are equipped with a rotational hinge.
92 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Power Mirrors The power mirror switch is located on the driver’s door trim panel next to the power door lock switch. A rotary knob selects the left mirror, right mirror or off position. After selecting a mirror, move the knob in the same direction you want the mirror to move. Use the center off position to guard against accidentally moving a mirror position. Heated Mirrors — If Equipped These mirrors are heated to melt frost or ice.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 93 desired position. To use the extender feature of the sun visor, grab the extender which is located at the rear of the visor and pull rearward.
94 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Uconnect™ Phone — IF EQUIPPED Uconnect™ Phone is a voice-activated, hands-free, invehicle communications system. Uconnect™ Phone allows you to dial a phone number with your mobile phone using simple voice commands (e.g., “Call” ѧ “Mike” ѧ “Work” or “Dial” ѧ “248-555-1212”). Your mobile phone’s audio is transmitted through your vehicle’s audio system; the system will automatically mute your radio when using the Uconnect™ Phone.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 95 system. Only one linked (or paired) mobile phone can be Voice Command Button used with the system at a time. The system is available in Actual button location may vary with the raEnglish, Spanish, or French languages. dio. The individual buttons are described in the “Operation” section. WARNING! Any voice commanded system should be used only in safe driving conditions following local laws and phone use. All attention should be kept on the roadway ahead.
96 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Operation Voice commands can be used to operate the Uconnect™ Phone and to navigate through the Uconnect™ Phone menu structure. Voice commands are required after most Uconnect™ Phone prompts. You will be prompted for a specific command and then guided through the available options. example, you can use the compound form voice command “Phonebook New Entry”, or you can break the compound form command into two voice commands: “Phonebook” and “New Entry”.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 97 Cancel Command • When prompted, after the beep, say “Pair a Device” At any prompt, after the beep, you can say “Cancel” and and follow the audible prompts. you will be returned to the main menu. However, in a • You will be asked to say a four-digit Personal Identifew instances the system will take you back to the fication Number (PIN), which you will later need to previous menu. enter into your mobile phone.
98 UNDERSTANDING THE FEATURES OF YOUR VEHICLE phone to use if multiple mobile phones are in the vehicle at the same time. For example, if priority three and priority five phones are present in the vehicle, the Uconnect™ Phone will use the priority three mobile phone when you make a call. You can select to use a lower priority mobile phone at any time (refer to “Advanced Phone Connectivity” in this section). Call By Saying A Name • Press the button to begin.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 99 After you are finished adding an entry into the phonebook, you will be given the opportunity to add more NOTE: Adding names to the Uconnect™ Phonebook is phone numbers to the current entry or to return to the recommended when the vehicle is not in motion. main menu. • Press the button to begin.
100 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • To call a name from the Uconnect™ Phonebook or • Only the mobile phone’s phonebook is downloaded. downloaded Phonebook, follow the procedure in SIM card phonebook is not part of the Mobile phone“Call by Saying a Name” section. book. • Automatic download and update, if supported, begins • This downloaded phonebook cannot be edited or as soon as the Bluetooth威 wireless phone connection is deleted on the Uconnect™ Phone.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 101 • After the “Ready” prompt and the following beep, say mobile and a home number, but you can add “John Doe’s” work number later using the “Phonebook Edit “Phonebook Edit Entry”. Entry” feature. • You will then be asked for the name of the phonebook entry that you wish to edit. Delete Uconnect™ Phonebook Entry • Next, choose the number designation (home, work, NOTE: Editing phonebook entries is recommended mobile, or other) that you wish to edit.
102 UNDERSTANDING THE FEATURES OF YOUR VEHICLE from the list, press the button while the • The Uconnect™ Phone will ask you to verify that you Uconnect™ Phone is playing the desired entry and say wish to delete all the entries from the phonebook. “Delete”. • After confirmation, the phonebook entries will be • After you enter the name, the Uconnect™ Phone will deleted. ask you which designation you wish to delete: home, • Note that only the phonebook in the current language work, mobile, other, or all.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 103 • To call one of the names in the list, press the Answer Or Reject An Incoming Call — No Call button during the playing of the desired name, and Currently In Progress When you receive a call on your mobile phone, the say “Call”. Uconnect™ Phone will interrupt the vehicle audio sysNOTE: The user can also exercise “Edit” or “Delete” tem, if on, and will ask if you would like to answer the operations at this point. button to accept the call. To reject the call.
104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Making A Second Call While Current Call Is In Progress To make a second call while you are currently on a call, press the button and say “Dial” or “Call” followed by the phone number or phonebook entry you wish to call. The first call will be on hold while the second call is in progress. To go back to the first call, refer to “Toggling Between Calls” in this section. To combine two calls, refer to “Conference Call” in this section.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 105 Call Termination To end a call in progress, momentarily press the button. Only the active call(s) will be terminated and if there is a call on hold, it will become the new active call. If the active call is terminated by the phone far end, a call on hold may not become active automatically. This is cell phone-dependent. To bring the call back from hold, press button until you hear a single beep. and hold the Redial • Press the button to begin.
106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Uconnect™ Phone Features Emergency Assistance If you are in an emergency and the mobile phone is reachable: Language Selection To change the language that the Uconnect™ Phone is • Pick up the phone and manually dial the emergency using: number for your area. • Press the button to begin.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 107 Canada and 060 for Mexico). The number dialed may Towing Assistance not be applicable with the available mobile service and If you need towing assistance: area. • Press the button to begin. • If supported, this number may be programmable on • After the “Ready” prompt and the following beep, say button and say some systems. To do this, press the “Towing Assistance”. “Setup”, followed by “Emergency”.
108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE When calling a number with your Uconnect™ Phone that normally requires you to enter in a touch-tone sequence on your mobile phone keypad, you can press the button and say the sequence you wish to enter, followed by the word “Send”. For example, if required to enter your PIN followed with a pound, (3 7 4 6 #), you can Voice Mail Calling button and say, “3 7 4 6 # Send”.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 109 The Uconnect™ Phone will then send the corresponding Turning Confirmation Prompts ON/OFF phone number associated with the phonebook entry, as Turning confirmation prompts off will stop the system from confirming your choices (e.g., the Uconnect™ tones over the phone. Phone will not repeat a phone number before you dial it). NOTE: • You may not hear all of the tones due to mobile phone • Press the button to begin. network configurations. This is normal.
110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Dialing Using The Mobile Phone Keypad You can dial a phone number with your mobile phone keypad and still use the Uconnect™ Phone (while dialing via the mobile phone keypad, the user must exercise caution and take precautionary safety measures). By dialing a number with your paired Bluetooth威 mobile phone, the audio will be played through your vehicle’s audio system. The Uconnect™ Phone will work the same as if you dial the number using Voice Command.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 111 from your Uconnect™ Phone paired mobile phone to the • When prompted, say “List Phones”. button Uconnect™ Phone or vice versa, press the • The Uconnect™ Phone will play the phone names of and say “Transfer Call”. all paired mobile phones in order from the highest to Connect Or Disconnect Link Between The the lowest priority.
112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The selected phone will be used for the next phone call. If the selected phone is not available, the Uconnect™ Phone will return to using the highest priority phone present in or near (approximately within 30 ft (9 m)) the vehicle. Things You Should Know About Your Uconnect™ Phone Uconnect™ Phone Tutorial To hear a brief tutorial of the system features, press the button and say “Uconnect™ Tutorial.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 113 You can either press the Uconnect™ Phone button to Voice Command restore the factory setting or repeat the words and • For best performance, adjust the rearview mirror to phrases when prompted by the Uconnect™ Phone. For provide at least 1⁄2 in (1 cm) gap between the overhead best results, the Voice Training session should be comconsole (if equipped) and the mirror.
114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • fully closed windows, • dry weather condition. • Numbers must be spoken in single digits. “800” must be spoken “eight-zero-zero” not “eight hundred”. • You can say “O” (letter “O”) for “0” (zero). • Even though the system is designed for users speaking in North American English, French, and Spanish ac- • Even though international dialing for most number combinations is supported, some shortcut dialing cents, the system may not always work for some.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 115 • fully closed windows, • dry weather conditions, and • operation from the driver’s seat. SMS Uconnect™ Phone can read or send new messages on your phone. Read Messages: • Performance, such as audio clarity, echo, and loudness If you receive a new text message while your phone is to a large degree rely on the phone and network, and connected to Uconnect™ Phone, an announcement will not the Uconnect™ Phone.
116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Where are you? Send Messages: You can send messages using Uconnect™ Phone. To send 4. I need more direction. a new message: 5. L O L • Press the button. 6. Why • After the “Ready” prompt and the following beep, say 7. I love you “SMS Send” or “Send Message.” • You can either say the message you wish to send or say 8. Call me “List Messages.” There are 20 preset messages. 9. Call me later button while the To send a message, press the 10.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 117 16. Can this wait? 17. Bye for now 18. When can we meet 19. Send number to call 20. Start without me Turn SMS Incoming Announcement ON/OFF Turning the SMS Incoming Announcement OFF will stop the system from announcing the new incoming messages. • Press the button. • After the “Ready” prompt and the following beep, say “Setup, SMS Incoming Message Announcement,” you will then be given a choice to change it.
118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 119 3
120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 121 Primary zero one two three four five six seven eight nine star (*) plus (+) pound (#) add location all Voice Commands Alternate(s) Voice Commands Alternate(s) Primary call cancel confirmation prompts continue delete dial download edit emergency English erase all Espanol Francais help home 3
122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Primary language list names list phones mobile mute mute off new entry no other pair a phone phone pairing phonebook previous record again redial Voice Commands Alternate(s) pairing phone book Voice Commands Primary Alternate(s) return to main menu return or main menu select phone select send set up phone settings or phone set up towing assistance transfer call Uconnect™ Tutorial try again voice training work yes
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123 General Information This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. • This device may not cause harmful interference. • This device must accept any interference received, including interference that may cause undesired operation.
124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If you ever wish to interrupt the system while it lists The system will best recognize your speech if the winbutton, listen dows are closed, and the heater/air conditioning fan is options, press the Voice Command set to low. for the beep, and say your command. button while the Pressing the Voice Command system is speaking is known as “barging in.” The system will be interrupted, and after the beep, you can add or change commands.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 125 3. Use the ON/OFF VOLUME rotary knob to adjust the Radio AM volume to a comfortable level while the Voice Command To switch to the AM band, say “AM” or “Radio AM”. In system is speaking. Please note the volume setting for this mode, you may say the following commands: Voice Command is different than the audio system.
126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • “Menu Radio” (to switch to the radio menu) • “Main Menu” (to switch to the main menu) Disc To switch to the disc mode, say “Disc”. In this mode, you may say the following commands: Satellite Radio • “Track” (#) (to change the track) To switch to satellite radio mode, say “Sat” or “Satellite Radio”.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 127 − “Continue” (to continue recording) • “Switch to system setup” − “Delete” (to delete the recording) • “Change to setup” • “Play Memos” (to play previously recorded memos) • “Main menu setup” or — During the playback you may press the Voice • “Switch to setup” button to stop playing memos.
128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Training For users experiencing difficulty with the system recognizing their voice commands or numbers the Uconnect™ Voice “Voice Training” feature may be used. button, say “System 1. Press the Voice Command Setup” and once you are in that menu then say “Voice Training.” This will train your own voice to the system and will improve recognition. WARNING! • It is dangerous to ride in a cargo area, inside or outside of a vehicle.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129 Adjusting The Seat Up Or Down The height of the seats can be adjusted up or down. Pull upward or push downward on the seat switch, the seat will move in the direction of the switch. Release the switch when the desired position has been reached. Tilting The Seat Up Or Down The angle of the seat cushion can be adjusted in four directions.
130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Push the switch rearward to decrease the lumbar support. Pushing upward or downward on the switch will raise and lower the position of the support. Power Lumbar Switch WARNING! • Adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death. • Seats should be adjusted before fastening the seat belts and while the vehicle is parked.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131 CAUTION! Do not place any article under a power seat or impede its ability to move as it may cause damage to the seat controls. Seat travel may become limited if movement is stopped by an obstruction in the seat’s path. Heated Seats The front driver and passenger seats may be equipped with heaters in both the seat cushions and seatbacks. The heaters provide the same average heat level for both the cushion and the seatback.
132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! • Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaustion or other physical condition must exercise care when using the seat heater. It may cause burns even at low temperatures, especially if used for long periods of time. • Do not place anything on the seat that insulates against heat, such as a blanket or cushion.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133 Manual Front Seatback Recline To adjust the seatback, lift the lever located on the outboard side of the seat, lean back to the desired position and release the lever. To return the seatback, lift the lever, lean forward and release the lever. Recline Lever WARNING! Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest.
134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Passenger Seat Easy Entry On the passenger seat, pull forward on the lever located on the side of the seatback in order to dump the seatback and slide the seat forward. You can also temporarily remove the seat belt from the guide loop on the seat and allow the seat belt to retract out of the way. This allows for easier access to the rear seat.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 135 WARNING! The head restraints for all occupants must be properly adjusted prior to operating the vehicle or occupying a seat. Head restraints should never be adjusted while the vehicle is in motion. Driving a vehicle with the head restraints improperly adjusted or removed could cause serious injury or death in the event of a collision. To raise the head restraint, pull upward on the head restraint.
136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The head restraints should only be removed by qualified technicians, for service purposes only. If either of the head restraints require removal, see your authorized dealer. To raise the head restraint, pull upward on the head restraint. To lower the head restraint, press the push button, located at the base of the head restraint, and push downward on the head restraint.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 NOTE: The outboard head restraints are not adjustable. Refer to “Occupant Restraints” in “Things To Know Before Starting Your Vehicle” for tether routing. Folding Rear Seat The rear seatbacks can be folded forward to provide an additional storage area. Pull on the loops located on the upper part of the rear seatback to fold down either or both seatbacks. These loops can be tucked away when not in use.
138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Folded Rear Seat When the seatback is folded to the upright position, make sure it is latched by strongly pulling on the top of the seatback above the seat strap. • Be certain that the seatback is securely locked into position. If the seatback is not securely locked into position, the seat will not provide the proper stability for child seats and/or passengers. An improperly latched seat could cause serious injury.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139 TO OPEN AND CLOSE THE HOOD Two latches must be released to open the hood. 1. Pull the hood release lever located under the left side of the instrument panel. 2. Move to the outside of the vehicle and push the safety catch to the left. The safety catch is located under the center front edge of the hood.
140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! To prevent possible damage, do not slam the hood to close it. Lower the hood until it is open approximately 6 in (15 cm), and then drop it. This should secure both latches. Never drive your vehicle unless the hood is fully closed, with both latches engaged. LIGHTS Headlights And Parking Lights The headlight switch is located on the left side of the instrument panel.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141 Rotate the headlight switch clockwise to the first detent for parking light and instrument panel light operation. Turn it to the second detent for headlight, parking light and instrument panel light operation. Headlights On With Wipers (Available With Automatic Headlights Only) When this feature is active, the headlights will turn on approximately 10 seconds after the wipers are turned on if the headlight switch is placed in the AUTO position.
142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To activate the delay feature, place the ignition in the OFF position while the headlights are still on. Then, turn off the headlights within 45 seconds. The delay interval begins when the headlight switch is turned off. Daytime Running Lights — If Equipped The high beam headlights will come on as Daytime Running Lights whenever the ignition is placed in the RUN position, the headlights are off and the parking brake is released.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143 An indicator light in the instrument cluster illuminates when the fog lights are turned on. NOTE: The fog lights will operate with the low beam headlights or parking lights on. However, selecting the high beam headlights will turn off the fog lights. 3 Multifunction Lever The multifunction lever controls the operation of the turn signals, headlight beam selection, and passing lights. The multifunction lever is located on the left side of the steering column.
144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: • If either light remains on and does not flash, or there is a very fast flash rate, check for a defective outside light bulb. If an indicator fails to light when the lever is moved, it would suggest that the indicator bulb is defective. Flash-To-Pass You can signal another vehicle with your headlights by lightly pulling the multifunction lever toward you. This will turn on the high beam headlights until the lever is released.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 145 open. This includes the glove box light, but not the trunk light. To restore interior light operation, either place the ignition in the RUN position or cycle the light switch. Dimmer Control The dimmer control is located to the right of the headlight switch.
146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Interior Light Defeat (OFF) Rotate the dimmer control to the extreme bottom off position. The interior lights will remain off when the doors are open. Parade Mode (Daytime Brightness Feature) Rotate the dimmer control upward to the first detent. This feature brightens all text displays such as the odometer, Electronic Vehicle Information Center (EVIC), and radio when the parking lights or headlights are on.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 147 CAUTION! Turn the windshield wipers off when driving through an automatic car wash. Damage to the windshield wipers may result if the wiper switch is left in any position other than off. Intermittent Wiper System Use the intermittent wiper when weather conditions make a single wiping cycle with a variable pause between cycles desirable.
148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If you activate the washer while the windshield wiper control is in the delay range, the wipers will operate for three wipe cycles after releasing the multifunction lever and then resume the intermittent interval previously selected.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149 TILT/TELESCOPING STEERING COLUMN This feature allows you to tilt the steering column upward or downward. It also allows you to lengthen or shorten the steering column. The tilt/telescoping control handle is located below the steering wheel at the end of the steering column. To unlock the steering column, push the lever downward (toward the floor). To tilt the steering column, move the steering wheel upward or downward as desired.
150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE HEATED STEERING WHEEL — IF EQUIPPED The steering wheel contains a heating element that helps warm your hands in cold weather. The heated steering wheel has only one temperature setting. Once the heated steering wheel has been turned on it will operate for approximately 58 to 70 minutes before automatically shutting off. The heated steering wheel can shut off early or may not turn on when the steering wheel is already warm.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 151 WARNING! (Continued) • Do not place anything on the steering wheel that insulates against heat, such as a blanket or steering wheel covers of any type and material.. This may cause the steering wheel heater to overheat. 3 ELECTRONIC SPEED CONTROL — IF EQUIPPED When engaged, the Electronic Speed Control takes over accelerator operations at speeds greater than 25 mph (40 km/h).
152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE System can be reactivated by pushing the Electronic To Set A Desired Speed Speed Control ON/OFF button and resetting the desired Turn the Electronic Speed Control ON. When the vehicle has reached the desired speed, press the SET (-) button vehicle set speed. and release. Release the accelerator and the vehicle will To Activate operate at the selected speed. Push the ON/OFF button. The Cruise Indicator Light in the instrument cluster will illuminate.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 153 decrease until the button is released. Release the button To Resume Speed To resume a previously set speed, push the RES (+) when the desired speed is reached, and the new set speed button and release. Resume can be used at any speed will be established. above 20 mph (32 km/h). Pressing the SET (-) button once will result in a 1 mph (2 km/h) decrease in set speed.
154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE On steep hills, a greater speed loss or gain may occur so Usage Precautions for limitations of this system and it may be preferable to drive without Electronic Speed recommendations. Control. ParkSense威 will retain the last system state (enabled or disabled) from the last ignition cycle when the ignition is WARNING! changed to the ON/RUN position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 155 (200 cm) from the rear fascia/bumper in the horizontal ParkSense姞 Display direction, depending on the location, type and orienta- When the vehicle is in REVERSE, the warning display will turn ON indicating the system status. tion of the obstacle. ParkSense姞 Warning Display The ParkSense威 Warning screen will only be displayed if Sound and Display is selected from the Customer- Programmable Features section of the Electronic Vehicle Information Center (EVIC).
156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The system will indicate a detected obstacle by showing three solid arcs and will produce a one-half second tone. As the vehicle moves closer to the object the EVIC display will show fewer arcs and the sound tone will change from slow, to fast, to continuous.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 157 3 Fast Tone Continuous Tone The vehicle is close to the obstacle when the EVIC display shows one flashing arc and sounds a continuous tone.
158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rear Distance (in/cm) Audible Alert Chime Arcs Greater than 79 in (200 cm) None Radio Volume Reduced No None WARNING ALERTS 79-39 in 39-24 in (200-100 cm) (100-60 cm) Single 1/2 Slow Second Tone 3 Solid 3 Slow (Continuous) Flashing Yes Yes 24-14 in (60-35 cm) Fast Less than 12 in (30 cm) Continuous 2 Slow Flashing Yes 1 Slow Flashing Yes NOTE: ParkSense威 will reduce the radio volume, if on, (EVIC)/Personal Settings (Customer-Programmable Features)” i
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 159 disabled, the EVIC will display the “PARK ASSIST SYS- bumper is clean and clear of snow, ice, mud, dirt or other obstruction and then cycle the ignition. If the message TEM OFF” message for approximately five seconds. continues to appear see an authorized dealer.
160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • When you turn ParkSense威 off, the instrument cluster will display “PARK ASSIST SYSTEM OFF.” Furthermore, once you turn ParkSense威 off, it remains off until you turn it on again, even if you cycle the ignition • key. • When you move the shift lever to the REVERSE position and ParkSense威 is turned off, the EVIC will display “PARK ASSIST SYSTEM OFF” message for approximately five seconds.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 161 CAUTION! WARNING! • ParkSense威 is only a parking aid and it is unable to recognize every obstacle, including small obstacles. Parking curbs might be temporarily detected or not detected at all. Obstacles located above or below the sensors will not be detected when they are in close proximity. • The vehicle must be driven slowly when using ParkSense威 in order to be able to stop in time when an obstacle is detected.
162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! (Continued) • Before using the ParkSense威 Rear Park Assist System, it is strongly recommended that the ball mount and hitch ball assembly is disconnected from the vehicle when the vehicle is not used for towing. Failure to do so can result in injury or damage to vehicles or obstacles because the hitch ball will be much closer to the obstacle than the rear fascia when the warning display turns on the single flashing arc and sounds the continuous tone.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 163 Press the lens to turn on the light. Press it a second time HomeLink威 unit is powered by your vehicles 12 Volt battery. to turn off the light. These lights also turn on when a door is opened, when The HomeLink威 buttons that are located in the overhead the UNLOCK button on the Remote Keyless Entry (RKE) console designate the three different HomeLink威 chantransmitter is pressed, or when the dimmer control is nels. turned fully upward, past the second detent.
164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: HomeLink威 is disabled when the Vehicle Secu- NOTE: • Erasing all channels should only be performed when rity Alarm is active. programming HomeLink威 for the first time. Do not Before You Begin Programming HomeLink姞 erase channels when programming additional buttons. Be sure that your vehicle is parked outside of the garage before you begin programming.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 165 3. Simultaneously press and hold both the Homelink威 button you want to program and the hand-held transmitter button. 4. Continue to hold buttons until the EVIC display changes from “CHANNEL # TRAINING” to “CHANNEL # TRAINED”, then release both buttons. NOTE: • It may take up to 30 seconds or longer in some cased for the channel to train. Training The Garage Door Opener • If the EVIC displays “DID NOT TRAIN” repeat from Step 2. 5.
166 UNDERSTANDING THE FEATURES OF YOUR VEHICLE On some garage door openers/devices there may be a Reprogramming A Single HomeLink威 Button light that blinks when the garage door opener/device is To reprogram a channel that has been previously trained, follow these steps: in the LEARN/TRAIN mode. NOTE: You have 30 seconds in which to initiate the next 1. Turn the ignition switch to the ON/RUN position. step after the LEARN button has been pressed. 2. Press and hold the desired HomeLink威 button until 6.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 167 2. Place the hand-held transmitter 1 to 3 inches (3 to 5. Press and hold the programmed HomeLink威 button. 8 cm) away from the HomeLink威 button you wish to The EVIC will display “CHANNEL # TRANSMIT”. If the garage door opener/device activates, programming is program. complete. 3.
168 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Simultaneously press and hold both the Homelink威 Canadian/Gate Operator Programming For programming transmitters in Canada/United States button while you press and release (“cycle”), your handthat require the transmitter signals to “time-out” after held transmitter every two seconds. several seconds of transmission. 4.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 169 Reprogramming A Single HomeLink威 Button Using HomeLink姞 To reprogram a channel that has been previously trained, To operate, press and release the programmed follow these steps: HomeLink威 button. Activation will now occur for the programmed device (i.e., garage door opener, gate opera1. Turn the ignition switch to the ON/RUN position. tor, security system, entry door lock, home/office light2. Press and hold the desired HomeLink威 button until ing, etc.,).
170 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Troubleshooting Tips If you are having trouble programming HomeLink威, here are some of the most common solutions: • Replace the battery in the original hand-held transmitter. • Press the LEARN button on the Garage Door Opener to complete the training for a Rolling Code. • Did you unplug the device for programming and remember to plug it back in? If you have any problems, or require assistance, please call toll-free 1–800–355–3515 or, on the Internet at www.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 171 General Information POWER SUNROOF — IF EQUIPPED This device complies with FCC rules Part 15 and Industry The power sunroof switch is located between the sun Canada RSS-210. Operation is subject to the following visors on the overhead console. two conditions: 1. This device may not cause harmful interference. 3 2. This device must accept any interference that may be received including interference that may cause undesired operation.
172 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! • Never leave children in a vehicle with the key in the ignition switch (or with the ignition in the Accessory or Run position, for vehicles equipped with Keyless Enter-N-Go). Occupants, particularly unattended children, can become entrapped by the power sunroof while operating the power sunroof switch. Such entrapment may result in serious injury or death. • In a collision, there is a greater risk of being thrown from a vehicle with an open sunroof.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 173 Pinch Protect Feature This feature will detect an obstruction in the opening of the sunroof during Express Close operation. If an obstruction in the path of the sunroof is detected, the sunroof will automatically retract. Remove the obstruction if this occurs. Next, press the switch forward and release to Express Close. Venting Sunroof — Express Press and release the “Vent” button, and the sunroof will open to the vent position.
174 UNDERSTANDING THE FEATURES OF YOUR VEHICLE the rear windows open, open the front and rear windows together to minimize the buffeting. If the buffeting occurs with the sunroof open, adjust the sunroof opening to minimize the buffeting or open any window. This power outlet will also operate a conventional cigar lighter unit. If desired, the front power outlet can be converted by your authorized dealer to provide power when the ignition is placed in the OFF position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 175 3 Front Power Outlet The center console power outlet is powered directly from the battery (power available at all times).
176 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Items plugged into this power outlet may discharge the battery and/or prevent the engine from starting. WARNING! To avoid serious injury or death: • Only devices designed for use in this type of outlet should be inserted into any 12 Volt outlet. • Do not touch with wet hands. • Close the lid when not in use and while driving the vehicle. • If this outlet is mishandled, it may cause an electric shock and failure.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 177 CAUTION! CAUTION! (Continued) • Many accessories that can be plugged in draw power from the vehicle’s battery even when not in use (i.e., cellular phones, etc.). Eventually, if plugged in long enough, the vehicle’s battery will discharge sufficiently to degrade battery life and/or prevent the engine from starting. • Accessories that draw higher power (i.e., coolers, vacuum cleaners, lights, etc.) will degrade the battery even more quickly.
178 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CUPHOLDERS Front Cupholders The front cupholders are located in the center console. Illuminated Front Cupholders — If Equipped The front cupholders are illuminated with LEDs. They are turned on with the headlights or parking lights. Refer to “Lights” in “Understanding The Features Of Your Vehicle” for further information. Rear Cupholders The rear seat cupholders are located in the center armrest between the rear seats.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 179 3 Rear Cupholders CONSOLE FEATURES Sliding Console Armrest Console Storage The center console has a storage compartment located Sliding Center Console Armrest underneath the armrest, and also contains a 12 Volt The center console armrest slides forward with three power outlet, a molded-in coin holder (designed to hold detents to provide flexibility for comfort, cupholder use various size coins). The center console may also be and shifting ease.
180 UNDERSTANDING THE FEATURES OF YOUR VEHICLE UCI supports Mini, 4G, Photo, Nano, 5G iPod威 and iPhone威 devices. Refer to “Universal Consumer Interface (UCI) — If Equipped” in “Understanding Your Instrument Panel” for further information. Center Console WARNING! Do not operate this vehicle with a console compartment lid in the open position. Cellular phones, music players, and other handheld electronic devices should be stowed while driving.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 181 REAR WINDOW FEATURES Rear Window Defroster The rear window defroster button is located on the climate control (Mode) knob. Press this button to turn on the rear window defroster and the heated outside mirrors (if equipped). An indicator in the button will illuminate when the rear window defroster is on. The rear window defroster automatically turns off after approximately 10 minutes. For an additional five minutes of operation, press the button a second time.
UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS 䡵 Instrument Panel Features . . . . . . . . . . . . . . . 186 䡵 Instrument Cluster . . . . . . . . . . . . . . . . . . . . 187 䡵 Instrument Cluster Descriptions . . . . . . . . . . . 188 䡵 Electronic Vehicle Information Center (EVIC) . . 198 ▫ Electronic Vehicle Information Center (EVIC) Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . 201 ▫ Engine Oil Change Indicator System . . . . . . . 203 ▫ Trip Functions . . . . . . . . . . . . . . . . . . .
184 UNDERSTANDING YOUR INSTRUMENT PANEL 䡵 Media Center 730N/430/430N (RHR/RER/ RBZ/RHB) CD/DVD/HDD/NAV — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . . . 217 ▫ Operating Instructions (Voice Command System) — If Equipped . . . . . . . . . . . . . . . . 217 ▫ Operating Instructions (Uconnect™ Phone) — If Equipped . . . . . . . 217 䡵 Media Center 130 (Sales Code RES) . . . . . . . . . 217 ▫ Operating Instructions — Radio Mode . . . . .
UNDERSTANDING YOUR INSTRUMENT PANEL 185 ▫ Controlling The iPod威 Or External USB Device Using Radio Buttons . . . . . . . . . . . . . 244 ▫ Play Mode . . . . . . . . . . . . . . . . . . . . . . . . . 244 ▫ List Or Browse Mode . . . . . . . . . . . . . . . . . 246 ▫ Bluetooth Streaming Audio (BTSA) . . . . . . . . 248 䡵 Harman Kardon威 Logic7威 High Performance Multichannel Surround Sound System With Driver-Selectable Surround (DSS) — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . . .
186 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT PANEL FEATURES 1 2 3 4 5 — Air Outlets — Instrument Cluster — Glove Compartment — Radio — Heated Seat Switch 6 — ESC OFF Switch 7 — Sport Button 8 — Hazard Warning Switch 9 — Heated Steering Wheel Switch 10 — Climate Control 11 — Ignition Switch 12 — Trunk Release Button 13 — Headlight Switch
UNDERSTANDING YOUR INSTRUMENT PANEL 187 INSTRUMENT CLUSTER 4
188 UNDERSTANDING YOUR INSTRUMENT PANEL 5. Tachometer The red segments indicate the maximum permissible 1. Fuel Gauge engine revolutions per minute (RPM x 1000) for each gear The pointer shows the level of fuel in the fuel tank when range. Ease up on the accelerator before reaching the red the ignition switch is in the ON/RUN position. area. 2. Trip Odometer Button 6.
UNDERSTANDING YOUR INSTRUMENT PANEL 189 7. Electronic Throttle Control (ETC) Warning Light This light will turn on briefly as a bulb check when the ignition switch is placed in ON/ RUN. This light will also turn on while the engine is running if there is a problem with the Electronic Throttle Control (ETC) system. If the light comes on while the engine is running, safely bring the vehicle to a complete stop as soon as possible, place the shift lever in PARK, and cycle the ignition key.
190 UNDERSTANDING YOUR INSTRUMENT PANEL CAUTION! WARNING! Driving with a hot cooling system could damage your vehicle. If the temperature gauge reads 240°F (116°C) or greater, pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until the pointer drops back into the normal range 200– 230°F (93–110°C). If the pointer remains at 240°F (116°C) or greater and you hear a chime, turn the engine OFF immediately and call for service. A hot engine cooling system is dangerous.
UNDERSTANDING YOUR INSTRUMENT PANEL 191 10. Air Bag Warning Light This light will turn on for four to eight seconds as a bulb check when the ignition switch is first turned to the ON/RUN position. If the light is either not on during starting, stays on, or turns on while driving, have the system inspected at an authorized dealer as soon as possible. Refer to “Occupant Restraints” in “Things To Know Before Starting Your Vehicle” for further information. 12.
192 UNDERSTANDING YOUR INSTRUMENT PANEL • Each time the ignition is turned to ON/RUN, the ESC Do not operate the vehicle until the cause is corrected. system will be ON, even if it was turned off previously. This light does not indicate how much oil is in the engine. The engine oil level must be checked under the hood. • The ESC system will make buzzing or clicking sounds when it is active. This is normal; the sounds will stop 15.
UNDERSTANDING YOUR INSTRUMENT PANEL 193 the repair technician should leave the odometer reading the same as it was before the repair or service. If s/he cannot do so, then the odometer must be set at zero, and a sticker must be placed in the door jamb stating what the mileage was before the repair or service. It is a good idea for you to make a record of the odometer reading before 18.
194 UNDERSTANDING YOUR INSTRUMENT PANEL press the TRIP ODOMETER button to turn off the The dual brake system provides a reserve braking capacmessage. If the problem continues, the message will ity in the event of a failure to a portion of the hydraulic system. A leak in either half of the dual brake system is appear the next time the vehicle is started.
UNDERSTANDING YOUR INSTRUMENT PANEL 195 WARNING! Driving a vehicle with the brake light on is dangerous. Part of the brake system may have failed. It will take longer to stop the vehicle. You could have a collision. Have the vehicle checked immediately. Vehicles equipped with the Anti-Lock Brake System (ABS), are also equipped with Electronic Brake Force Distribution (EBD). In the event of an EBD failure, the Brake Warning Light will turn on along with the ABS Light.
196 UNDERSTANDING YOUR INSTRUMENT PANEL vehicle placard or tire inflation pressure label, you should Your vehicle has also been equipped with a TPMS determine the proper tire inflation pressure for those malfunction indicator to indicate when the system is not operating properly. The TPMS malfunction indicator is tires.) combined with the low tire pressure telltale.
UNDERSTANDING YOUR INSTRUMENT PANEL 197 CAUTION! The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and warning have been established for the tire size equipped on your vehicle. Undesirable system operation or sensor damage may result when using replacement equipment that is not of the same size, type, and/or style. Aftermarket wheels can cause sensor damage.
198 UNDERSTANDING YOUR INSTRUMENT PANEL the ignition is in the ON/RUN position before engine start. If the MIL does not come on when turning the key from OFF to ON/RUN, have the condition checked promptly. Certain conditions, such as a loose or missing gas cap, poor fuel quality, etc., may illuminate the MIL after engine start. The vehicle should be serviced if the MIL stays on through several of your typical driving cycles. In most situations, the vehicle will drive normally and will not require towing.
UNDERSTANDING YOUR INSTRUMENT PANEL 199 • Vehicle Information Warning Message Displays • Tire Pressure Monitor System • Personal Settings (Customer-Programmable Features) • Compass Display • Outside Temperature Display • Trip Computer Functions • Uconnect™ phone Displays (If Equipped) • Uconnect™ gps Screens (If Equipped) Electronic Vehicle Information Center • Audio Mode Display This system conveniently allows the driver to select a • Surround Sound Modes (if equipped with Drivervariety of useful informat
200 UNDERSTANDING YOUR INSTRUMENT PANEL The system allows the driver to select information by MENU Button pressing the following buttons mounted on the steering Press and release the MENU button to access wheel: the main menu, or to return to the main menu from the sub-menus. UP Button Press and release the UP button to scroll upward through the main menus and sub-menus. DOWN Button Press and release the DOWN button to scroll downward through the main menus and submenus.
UNDERSTANDING YOUR INSTRUMENT PANEL 201 SELECT Button • Right Rear Turn Signal Lamp Out (with a single Press and release the SELECT button for access chime) to main menus, sub-menus or to select a per• Personal Settings Not Available – Vehicle Not in PARK sonal setting in the setup menu. Press and hold the SELECT button for two seconds to reset • Door Ajar features.
202 UNDERSTANDING YOUR INSTRUMENT PANEL • Did Not Train • 1–4 SKIPSHIFT • Low Tire Pressure (with a single chime) • UPSHIFT • Service TPM System (with a single chime) • Sport Mode Active • ESC Off – Electronic Stability Control is deactivated • 0-60 mph (0-100 km/h) • Check Gascap • Braking Distance • Key Fob Battery Low • 1/8 Mile • Service Keyless System • 1/4 Mile • Wrong Key • Instantaneous G-Force • Damaged Key • Peak G-Force • Key not Programmed • Digital Speedometer • Push Button
UNDERSTANDING YOUR INSTRUMENT PANEL 203 Engine Oil Change Indicator System Vehicles Equipped With Keyless Enter-N-Go Oil Change Required Your vehicle is equipped with an engine oil change indicator system. The “Oil Change Required” message will flash in the EVIC display for approximately 10 seconds after a single chime has sounded, to indicate the next scheduled oil change interval.
204 UNDERSTANDING YOUR INSTRUMENT PANEL Trip Functions To access, press and release the MENU button until “Trip Functions” appears in the EVIC, then press and release the SELECT button. The Trip Functions include the following: • Average Fuel Economy • Distance To Empty • Trip A • Trip B • Elapsed Time • Display Units of Measure in Average Fuel Economy Shows the average fuel economy since the last reset. When the fuel economy is reset, the display will read “RESET” or show dashes for two seconds.
UNDERSTANDING YOUR INSTRUMENT PANEL 205 When the DTE value is less than 30 miles (48 km) estimated driving distance, the DTE display will change to a text display of ⬙LOW FUEL.⬙ This display will continue until the vehicle runs out of fuel. Adding a significant amount of fuel to the vehicle will turn off the ⬙LOW FUEL⬙ text and a new DTE value will display. Display Units of Measure in To make your selection, press and release the SELECT button until “ENGLISH” or “METRIC” appears.
206 UNDERSTANDING YOUR INSTRUMENT PANEL Performance Features WARNING! Measurement of vehicle statistics with the Performance Features is intended for off-highway or offroad use only and should not be done on any public roadways. It is recommended that these features be used in a controlled environment and within the limits of the law.
UNDERSTANDING YOUR INSTRUMENT PANEL 207 • Digital Speedometer • The time will continue to display until the SELECT button is pressed. To access, press and release either the UP or DOWN arrow button until “Performance Features” appears in • Pressing the SELECT button will clear the current run time and display the vehicle’s best 0-60 mph the EVIC, then press and release the SELECT button. (0-100 km/h) time. Press the UP or DOWN button to cycle through the features.
208 UNDERSTANDING YOUR INSTRUMENT PANEL • The distance and speed measurements display while • Dashes will display if the vehicle fails to reach the event is taking place. 1/8 mile (1/4 mile) in less then 30 seconds. • The distance measurement will be aborted if the brake • The time and speed will continue to display until the pedal is released before the vehicle comes to a comSELECT button is pressed. plete stop.
UNDERSTANDING YOUR INSTRUMENT PANEL 209 • When a force greater than zero is measured, the display will update the value as it climbs. As the G-Force falls, the peak forces will continue to display. • Pressing the SELECT button will clear the peak force values. Digital Speedometer When selected, this screen displays vehicle speed and records top speed. • Press and hold the SELECT button for three seconds to toggle between current speed and top speed.
210 UNDERSTANDING YOUR INSTRUMENT PANEL Refer to “Keyless Enter-N-Go” in “Starting And Operat- Compass Display The compass readings indicate the direction ing” for more information. the vehicle is facing. Press and release the NOTE: Under certain conditions, the display may be MENU button until “Compass” displays in the superseded by another display of higher priority. But EVIC, then press and release the SELECT butwhen the ignition switch position is changed, the display MENU Button ton.
UNDERSTANDING YOUR INSTRUMENT PANEL 211 degree turns (in an area free from large metal or metallic 5. Slowly complete one or more 360-degree turns (in an objects) until the “CAL” message displayed in the EVIC area free from large metal or metallic objects) until the “CAL” message turns off. The compass will now function turns off. The compass will now function normally. normally.
212 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: Keep magnetic materials away from the top of the instrument panel, such as iPod’s, Mobile Phones, Laptops and Radar Detectors. This is where the compass module is located, and it can cause interference with the compass sensor, and it may give false readings. 2. Press and release the MENU button until Personal Settings displays in the EVIC. 3. Press the UP or DOWN button until “COMPASS VARIANCE” message and the last variance zone number displays in the EVIC. 4.
UNDERSTANDING YOUR INSTRUMENT PANEL 213 • Oil Pressure Shows the actual oil pressure. SELECT button while in this display to select English, Espanol, or Francais. Then, as you continue, the information will display in the selected language. • Tire Pressure Shows the actual tire pressure for each tire (EXCLUDING NOTE: The EVIC will not change the Uconnect™ language selection. Refer to “Uconnect™ phone” in “UnderTHE SPARE TIRE).
214 UNDERSTANDING YOUR INSTRUMENT PANEL transmitter UNLOCK button twice to unlock the passenger door. When All Doors 1st Press is selected, both of the doors will unlock on the first press of the RKE transmitter UNLOCK button. To make your selection, press and release the SELECT button until “Driver Door 1st Press” or “All Doors 1st Press” appears. Sound Horn with Remote Key Lock When ON is selected, a short horn sound will occur when the RKE transmitter LOCK button is pressed.
UNDERSTANDING YOUR INSTRUMENT PANEL 215 headlights will also turn off when the wipers are turned off if they were turned on by this feature. To make your selection, press and release the SELECT button until “ON” or “OFF” appears. Hill Start Assist (HSA) — If Equipped When on is selected, the HSA system is active. Refer to “Electronic Brake Control System” in “Starting And Operating” for system function and operating information.
216 UNDERSTANDING YOUR INSTRUMENT PANEL vehicle door will cancel this feature. To make your been deactivated. Refer to “Keyless Enter-N-Go” in selection, press and release the SELECT button until “Things To Know Before Starting Your Vehicle”. “Off,” “45 sec.,” “5 min.,” “10 min.,” “30 min.,” or “60 Enable/Disable the Rear Park Assist System min.” appears.
UNDERSTANDING YOUR INSTRUMENT PANEL 217 measure. To make your selection, press and release the MEDIA CENTER 130 (SALES CODE RES) SELECT button until “ENGLISH” or “METRIC” appears. NOTE: The radio sales code is located on the lower right side of the radio faceplate. MEDIA CENTER 730N/430/430N (RHR/RER/RBZ/ RHB) CD/DVD/HDD/NAV — IF EQUIPPED NOTE: The sales code is located on the lower right side of the unit’s faceplate.
218 UNDERSTANDING YOUR INSTRUMENT PANEL SEEK Buttons Press and release the SEEK buttons to search for the next NOTE: The ignition switch must be in the ON or ACC listenable station in AM/FM mode. Press the right switch position to operate the radio. to seek up and the left switch to seek down. The radio Power Switch/Volume Control (Rotary) will remain tuned to the new station until you make Push the ON/VOLUME control knob to turn on the another selection. Holding either button will bypass radio.
UNDERSTANDING YOUR INSTRUMENT PANEL 219 4. Adjust the minutes using the right side TUNE/ Push the rotary TUNE/SCROLL control knob a second SCROLL control knob. Press the TUNE/SCROLL control time and MID will display. Turn the TUNE/SCROLL control knob to the right or left to increase or decrease the knob to save time change. mid-range tones. 5. To exit, press any button/knob, or wait five seconds. Push the rotary TUNE/SCROLL control knob a third RW/FF time and TREBLE will display.
220 UNDERSTANDING YOUR INSTRUMENT PANEL Push the rotary TUNE/SCROLL control knob again to You may add a second station to each pushbutton by repeating the above procedure with this exception: Press exit setting tone, balance, and fade. the SET/RND button twice and SET 2 will show in the AM/FM Button display window. Each button can be set for SET 1 and Press the buttons to select either AM or FM mode. SET 2 in both AM and FM.
UNDERSTANDING YOUR INSTRUMENT PANEL 221 If you insert a disc with the ignition ON and the radio ON, the unit will switch from radio to CD mode and begin to play when you insert the disc. The display will NOTE: show the track number, and index time in minutes and • The ignition switch must be in the ON or ACC seconds. Play will begin at the start of track 1. position to operate the radio.
222 UNDERSTANDING YOUR INSTRUMENT PANEL EJECT Button - Ejecting a CD Press the EJECT button to eject the CD. the current selection. Pressing and holding the SEEK button will allow faster scrolling through the tracks in CD and MP3 modes. TIME Button Press this button to change the display from a large CD If you have ejected a disc and have not removed it within playing time display to a small CD playing time display. 10 seconds, it will be reloaded.
UNDERSTANDING YOUR INSTRUMENT PANEL 223 SET/RND Button (Random Play Button) Press this button while the CD is playing to activate Random Play. This feature plays the selections on the compact disc in random order to provide an interesting change of pace. Supported Medium Formats (File Systems) The medium formats supported by the radio are ISO 9660 Level 1 and Level 2 and includes the Joliet extension.
224 UNDERSTANDING YOUR INSTRUMENT PANEL • Maximum number of characters in file/folder names: When using the MP3 encoder to compress audio data to an MP3 file, the bit rate and sampling frequencies in the • Level 1: 12 (including a separator ⬙.⬙ and a threefollowing table are supported. In addition, variable bit character extension) rates (VBR) are also supported. The majority of MP3 files • Level 2: 31 (including a separator ⬙.⬙ and a three- use a 44.
UNDERSTANDING YOUR INSTRUMENT PANEL 225 Playlist files are not supported. MP3 Pro files are not To increase the speed of disc loading, it is recommended to use CD-R media and single-session discs. To create a supported. single-session disc, enable the “Disc at Once” option Playback of MP3 Files before writing to the disc. When a medium containing MP3 data is loaded, the radio checks all files on the medium.
226 UNDERSTANDING YOUR INSTRUMENT PANEL TIME Button (Auxiliary Mode) Press this button to change the display to time of day. The time of day will display for five seconds (when ignition is OFF). MEDIA CENTER 130 WITH SATELLITE RADIO (SALES CODE RES+RSC) NOTE: The radio sales code is located on the lower right side of the radio faceplate. Media Center 130 (RES/RSC) Operating Instructions — Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio.
UNDERSTANDING YOUR INSTRUMENT PANEL 227 Power Switch/Volume Control (Rotary) Voice Command System (Radio) — If Equipped Push the ON/VOLUME control knob to turn on the Refer to “Voice Command” in “Understanding The Fearadio. Push the ON/VOLUME control knob a second tures Of Your Vehicle”. time to turn off the radio.
228 UNDERSTANDING YOUR INSTRUMENT PANEL If your vehicle is not equipped with or this feature is not 4. Adjust the minutes using the right side TUNE/ available on your vehicle, a “Not Equipped With SCROLL control knob. Press the TUNE/SCROLL control Uconnect Phone” message will display on the radio knob to save time change. screen. 5. To exit, press any button/knob or wait five seconds. TIME Button The clock can also be set by pressing the SETUP button.
UNDERSTANDING YOUR INSTRUMENT PANEL 229 RW/FF Pressing the RW (Rewind) or FF (Fast Forward) buttons causes the tuner to search for the next frequency in the direction of the arrows. This feature operates in either AM or FM frequencies. Push the rotary TUNE/SCROLL control knob a third time and TREBLE will display. Turn the TUNE/SCROLL control knob to the right or left to increase or decrease the treble tones. Push the rotary TUNE/SCROLL control knob a fourth time and BALANCE will display.
230 UNDERSTANDING YOUR INSTRUMENT PANEL or turning the TUNE/SCROLL control knob within five seconds will allow the program format type to be selected. Many radio stations do not currently broadcast Music Type information.
UNDERSTANDING YOUR INSTRUMENT PANEL 231 the minutes using the right side TUNE/SCROLL By pressing the SEEK button when the Music Type icon control knob. Press the TUNE/SCROLL control knob is displayed, the radio will be tuned to the next frequency to save time change. station with the same selected Music Type name. The Music Type function only operates when in the FM AM/FM Button mode. Press the button to select either AM or FM mode.
232 UNDERSTANDING YOUR INSTRUMENT PANEL You may add a second station to each pushbutton by repeating the above procedure with this exception: Press the SET/RND button twice and SET 2 will show in the display window. Each button can be set for SET 1 and SET 2 in both AM and FM. This allows a total of 12 AM and 12 FM stations to be stored into pushbutton memory. The stations stored in SET 2 memory can be selected by pressing the pushbutton twice.
UNDERSTANDING YOUR INSTRUMENT PANEL 233 If you insert a disc with the ignition ON and the radio EJECT Button - Ejecting a CD Press the EJECT button to eject the CD. ON, the unit will switch from radio to CD mode and begin to play when you insert the disc. The display will show the track number, and index time in minutes and seconds. Play will begin at the start of track 1. If you have ejected a disc and have not removed it within CAUTION! 10 seconds, it will be reloaded.
234 UNDERSTANDING YOUR INSTRUMENT PANEL SEEK Button Press the right SEEK button for the next selection on the CD. Press the left SEEK button to return to the beginning of the current selection, or return to the beginning of the previous selection if the CD is within the first second of the current selection. Pressing and holding the SEEK button will allow faster scrolling through the tracks in CD and MP3 modes.
UNDERSTANDING YOUR INSTRUMENT PANEL 235 Supported Medium Formats (File Systems) • Maximum number of characters in file/folder names: The medium formats supported by the radio are ISO 9660 • Level 1: 12 (including a separator ⬙.⬙ and a threeLevel 1 and Level 2 and includes the Joliet extension. character extension) When reading discs recorded using formats other than • Level 2: 31 (including a separator ⬙.
236 UNDERSTANDING YOUR INSTRUMENT PANEL When using the MP3 encoder to compress audio data to an MP3 file, the bit rate and sampling frequencies in the following table are supported. In addition, variable bit rates (VBR) are also supported. The majority of MP3 files use a 44.1 kHz sampling rate and a 192, 160, 128, 96 or VBR bit rates. MPEG Specification Sampling Frequency (kHz) MPEG-1 Audio Layer 3 48, 44.1, 32 MPEG-2 Audio Layer 3 24, 22.
UNDERSTANDING YOUR INSTRUMENT PANEL 237 To increase the speed of disc loading, it is recommended Press the INFO button once more to return to ⬙elapsed to use CD-R media and single-session discs. To create a time⬙ priority mode. single-session disc, enable the “Disc at Once” option Press and hold the INFO button for three seconds or before writing to the disc. more and the radio will display song titles for each file.
238 UNDERSTANDING YOUR INSTRUMENT PANEL is not loud enough, turn the device’s volume up. If the System Activation AUX audio sounds distorted, turn the device’s volume Sirius Satellite Radio service is pre-activated, and you may begin listening immediately to the one year of audio down. service that is included with the factory-installed satellite TIME Button (Auxiliary Mode) radio system in your vehicle. Sirius will supply a welPress this button to change the display to time of day.
UNDERSTANDING YOUR INSTRUMENT PANEL 239 To access the ESN/SID, refer to the following steps: ESN/SID Access With the ignition switch in the ON/RUN or ACC position and the radio on, press the SETUP button and scroll using the TUNE/SCROLL control knob until Sirius ID is selected. Press the TUNE/SCROLL control knob and the Sirius ID number will display. The Sirius ID number display will time out in two minutes. Press any button on the radio to exit this screen.
240 UNDERSTANDING YOUR INSTRUMENT PANEL Operating Instructions - Uconnect™ Multimedia (Satellite) Mode INFO Button Pressing the INFO button will cycle the display information between Artist, Song Title, and Composer (if availNOTE: The ignition switch must be in the ON/RUN or able). Also, pressing and holding the INFO button for an ACC position to operate the radio.
UNDERSTANDING YOUR INSTRUMENT PANEL 241 or turning the TUNE/SCROLL control knob within five SET Button – To Set the Pushbutton Memory seconds will allow the program format type to be selected. When you are receiving a channel that you wish to commit to pushbutton memory, press the SET button. Toggle the MUSIC TYPE button again to select the music The symbol SET 1 will now show in the display window. type.
242 UNDERSTANDING YOUR INSTRUMENT PANEL Every time a preset button is used, a corresponding This feature allows an iPod威 or external USB device to be plugged into the USB port, located in the center console button number will display. or glove compartment. Buttons 1 - 6 These buttons tune the radio to the channels that you iPod威 control supports Mini, 4G, Photo, Nano, 5G iPod威 and iPhone威 devices. Some iPod威 software versions may commit to pushbutton memory (12 Satellite stations).
UNDERSTANDING YOUR INSTRUMENT PANEL 243 Connecting The iPod姞 Or External USB Device Use the connection cable to connect an iPod威 or external USB device to the vehicle’s USB/AUX connector port which is located in the center console or glove compartment.
244 UNDERSTANDING YOUR INSTRUMENT PANEL • The audio device can be controlled using the radio mode. In Play mode, the following buttons on the radio buttons to Play, Browse, and List the iPod威 contents. faceplate may be used to control the iPod威 or external USB device and display data: • The audio device battery charges when plugged into the USB/AUX connector (if supported by the specific • Use the TUNE control knob to select the next or previous track.
UNDERSTANDING YOUR INSTRUMENT PANEL 245 • A single press backward << RW or forward FF >> will • Press the SCAN button to use iPod威/USB/MP3 dejump backward or forward respectively, for five vice scan mode, which will play the first 10 seconds of seconds. each track in the current list and then forward to the next song. To stop SCAN mode and start playing the • Use the << SEEK and SEEK >> buttons to jump to the desired track, when it is playing the track, press the previous or next track.
246 UNDERSTANDING YOUR INSTRUMENT PANEL List Or Browse Mode During Play mode, pressing any of the buttons described below, will bring up List mode. List mode enables scrolling through the list of menus and tracks on the audio device. • TUNE control knob: The TUNE control knob functions in a similar manner as the scroll wheel on the audio device or external USB device.
UNDERSTANDING YOUR INSTRUMENT PANEL 247 • Pressing a PRESET button will display the current list on the top line and the first item in that list on the second line. • To exit List mode without selecting a track, press the same PRESET button again to go back to Play mode. • LIST button: The LIST button will display the top level menu of the iPod威 or external USB device. Turn the TUNE control knob to list the top-menu item to be selected and press the TUNE control knob.
248 UNDERSTANDING YOUR INSTRUMENT PANEL 2. After the ⬙Ready⬙ prompt and the following beep, say Bluetooth Streaming Audio (BTSA) Music can be streamed from your cellular phone to the ⬙Setup⬙, then ⬙Select Audio Devices⬙. Uconnect™ phone system. 3. Say the name of the audio device or ask the Uconnect™ phone system to list audio devices.
UNDERSTANDING YOUR INSTRUMENT PANEL 249 HARMAN KARDON姞 Logic7姞 HIGH PERFORMANCE MULTICHANNEL SURROUND SOUND SYSTEM WITH DRIVER-SELECTABLE SURROUND (DSS) — IF EQUIPPED Your vehicle is equipped with a Harman Kardon威 audio system with GreenEdge™ technology that offers superior sound quality, higher Sound Pressure Levels (SPL) and reduced energy consumption. The new system utilizes proprietary amplifier and speaker technologies delivering substantial increases in component and system efficiency levels.
250 UNDERSTANDING YOUR INSTRUMENT PANEL Selecting “Surround Sound” through the DSS modes activates the Harman Kardon威 Logic7威 multichannel surround-sound technology in your vehicle. Some audio will sound better in DSS modes, others in Stereo mode. When in “Surround Sound” mode, balance is set automatically. Fader control is available in surround mode but should be set to the center position for optimal surround performance.
UNDERSTANDING YOUR INSTRUMENT PANEL 251 Pressing the center button will make the radio switch CD Player between the various modes available (AM/FM/SAT/ Pressing the top of the switch once will go to the next track on the CD. Pressing the bottom of the switch once CD/HDD/AUX/VES, etc.). will go to the beginning of the current track, or to the The left-hand control is a rocker-type switch with a beginning of the previous track if it is within one second pushbutton in the center.
252 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: If you experience difficulty in playing a particuCD/DVD DISC MAINTENANCE To keep a CD/DVD in good condition, take the following lar disc, it may be damaged (i.e., scratched, reflective precautions: coating removed, a hair, moisture or dew on the disc) oversized, or have protection encoding. Try a known 1. Handle the disc by its edge; avoid touching the good disc before considering disc player service. surface. 2.
UNDERSTANDING YOUR INSTRUMENT PANEL 253 CLIMATE CONTROLS Automatic Operation Operation of the system is quite simple. Automatic Temperature Control (ATC) The Automatic Temperature Control system automati- 1. Turn the Mode Control knob (on the right) and the cally maintains the climate in the cabin of the vehicle at Blower Control knob (on the left) to AUTO. the comfort levels desired by the driver and passenger. NOTE: The AUTO position performs best for front seat occupants only. 2.
254 UNDERSTANDING YOUR INSTRUMENT PANEL The recommended setting for maximum comfort for the Blower Control For full automatic operation or for average person is 72°F (22°C); however, this may vary. automatic blower operation, turn the NOTE: knob to the AUTO position. In manual • The temperature setting can be adjusted at anytime mode there are seven blower speeds without affecting automatic operation. that can be individual selected.
UNDERSTANDING YOUR INSTRUMENT PANEL 255
256 UNDERSTANDING YOUR INSTRUMENT PANEL The operator can override the AUTO mode setting to • Floor change airflow distribution by rotating the Mode Control Air is directed through the floor outlets with a knob (on the right) to one of the following positions. small amount flowing through the defrost and side window demist outlets. • Panel Air is directed through the outlets in the instrument • Mix panel. These outlets can be adjusted to direct airflow.
UNDERSTANDING YOUR INSTRUMENT PANEL 257 NOTE: • Air Conditioner Control Press this button to turn on the air • When the ignition switch is turned to the LOCK position, the recirculation feature will be cancelled. conditioning during manual operation only. When the air conditioning is • In cold weather, use of the Recirculation mode may turned on, cool dehumidified air will lead to excessive window fogging.
258 UNDERSTANDING YOUR INSTRUMENT PANEL • Most of the time, when in Automatic Operation, you can temporarily put the system into Recirculation Mode by pressing the Recirculation button. However, under certain conditions, while in Automatic Mode, the system is blowing air out the defrost vents. When these conditions are present, and the Recirculation button is pressed, the indicator will flash and then turn off. This tells you that you are unable to go into Recirculation Mode at this time.
UNDERSTANDING YOUR INSTRUMENT PANEL 259 Window Fogging Interior fogging on the windshield can be quickly removed by turning the mode selector to Defrost. The Defrost/Floor mode can be used to maintain a clear windshield and provide sufficient heating. If side window fogging becomes a problem, increase blower speed. Vehicle windows tend to fog on the inside in mild but rainy or humid weather. NOTE: Recirculate without A/C should not be used for long periods as fogging may occur.
260 UNDERSTANDING YOUR INSTRUMENT PANEL Control Setting Suggestions for Various Weather Conditions
STARTING AND OPERATING CONTENTS 䡵 Starting Procedures . . . . . . . . . . . . . . . . . . . . 265 䡵 Engine Block Heater — If Equipped . . . . . . . . 273 ▫ Manual Transmission – If Equipped . . . . . . . 265 䡵 Manual Transmission — If Equipped . . . . . . . . 273 ▫ Automatic Transmission – If Equipped . . . . . 266 ▫ Six-Speed Manual Transmission . . . . . . . . . . 273 ▫ Keyless Enter-N-Go . . . . . . . . . . . . . . . . . . . 267 䡵 Automatic Transmission — If Equipped . . . . . .
262 STARTING AND OPERATING 䡵 AutoStick威 . . . . . . . . . . . . . . . . . . . . . . . . . . 286 ▫ Automatic Transmission – If Equipped . . . . . 296 ▫ Steering Wheel Mounted Paddle Shifters Or Console Mounted Shifter . . . . . . . . . . . . . . . 286 䡵 Brake System . . . . . . . . . . . . . . . . . . . . . . . . 298 䡵 Sport Mode . . . . . . . . . . . . . . . . . . . . . . . . . . 288 䡵 Driving On Slippery Surfaces . . . . . . . . . . . . . 289 ▫ Acceleration . . . . . . . . . . . . . . . . . . . . . .
STARTING AND OPERATING 263 䡵 Tire Safety Information . . . . . . . . . . . . . . . . . 310 䡵 Tire Chains . . . . . . . . . . . . . . . . . . . . . . . . . . 327 ▫ Tire Markings . . . . . . . . . . . . . . . . . . . . . . . 310 䡵 Snow Tires . . . . . . . . . . . . . . . . . . . . . . . . . . 329 ▫ Tire Terminology And Definitions . . . . . . . . . 315 䡵 Tire Rotation Recommendations . . . . . . . . . . . 330 ▫ Tire Loading And Tire Pressure . . . . . . . . . .
264 STARTING AND OPERATING ▫ MMT In Gasoline . . . . . . . . . . . . . . . . . . . . 341 ▫ Gross Vehicle Weight Rating (GVWR) . . . . . . 346 ▫ Materials Added To Fuel . . . . . . . . . . . . . . . 341 ▫ Gross Axle Weight Rating (GAWR) . . . . . . . . 346 ▫ Fuel System Cautions . . . . . . . . . . . . . . . . . 342 ▫ Overloading . . . . . . . . . . . . . . . . . . . . . . . . 347 ▫ Carbon Monoxide Warnings . . . . . . . . . . . . 343 ▫ Loading . . . . . . . . . . . . . . . . . . . . . . . . . . .
STARTING AND OPERATING 265 STARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust the inside and outside mirrors, fasten your seat belt, and if present, instruct all other occupants to buckle their seat belts. WARNING! • When leaving the vehicle, always remove the key fob from the ignition and lock your vehicle. • Never leave children alone in a vehicle, or with access to an unlocked vehicle. Allowing children to be in a vehicle unattended is dangerous for a number of reasons.
266 STARTING AND OPERATING ignition switch to the START position and release when the engine starts. If the engine fails to start within 15 seconds, turn the ignition switch to the OFF position, wait 10 to 15 seconds, then repeat the “Normal Starting” procedure. Automatic Transmission – If Equipped The shift lever must be in the NEUTRAL or PARK position before you can start the engine. Apply the brakes before shifting into any driving gear.
STARTING AND OPERATING 267 Using Fob With Integrated Key (Tip Start) NOTE: Normal starting of either a cold or a warm engine is obtained without pumping or pressing the accelerator pedal. Do not press the accelerator. Use the Fob with Integrated Key to briefly turn the ignition switch to the START position and release it as soon as the starter engages. The starter motor will continue to run, and it will disengage automatically when the engine is running.
268 STARTING AND OPERATING To start the engine, the transmission must be in PARK or NEUTRAL. Press and hold the brake pedal while press1. The ENGINE START/STOP button can be removed ing the ENGINE START/STOP button once. The system from the ignition switch for key fob use. takes over and attempts to start the vehicle. If the vehicle 2.
STARTING AND OPERATING 269 to 15 seconds, then repeat the “Normal Starting” proce- display a “Vehicle Not In Park” message and the engine dure. If you wish to stop the cranking of the engine prior will remain running. Never leave a vehicle out of the PARK position, or it could roll. to the engine starting, release the button.
270 STARTING AND OPERATING NOTE: • If the ignition switch is left in the ACC position, the system will automatically time out after 30 minutes of inactivity and the ignition will switch to the OFF position. Keyless Enter-N-Go Functions – With Driver’s Foot OFF The Brake Pedal/Clutch Pedal (In PARK Or NEUTRAL Position) The Keyless Enter-N-Go feature operates similar to an ignition switch. It has four positions, OFF, ACC, RUN and START.
STARTING AND OPERATING 271 • Press the ENGINE START/STOP button a third time to return the ignition switch to the OFF position (EVIC displays “IGNITION MODE OFF”). Extreme Cold Weather (Below –20°F Or ⫺29°C) To ensure reliable starting at these temperatures, use of an externally powered electric engine block heater (available from your authorized dealer) is recommended.
272 STARTING AND OPERATING Clearing A Flooded Engine (Using ENGINE START/STOP Button) – Automatic Transmission Only If the engine fails to start after you have followed the “Normal Starting” or “Extreme Cold Weather⬙ procedures, it may be flooded. To clear any excess fuel, press and hold the brake pedal, push the accelerator pedal all the way to the floor and hold it, then press and release the ENGINE START/STOP button once.
STARTING AND OPERATING 273 CAUTION! The engine block heater must be plugged in at least one hour to have an adequate warming effect on the engine. To prevent damage to the starter, wait 10 to 15 seconds before trying again. WARNING! After Starting The idle speed is controlled automatically and it will decrease as the engine warms up. Remember to disconnect the engine block heater cord before driving. Damage to the 110-115 Volt electrical cord could cause electrocution.
274 STARTING AND OPERATING CAUTION! • Never drive with your foot resting on the clutch pedal, or try to hold the vehicle on a hill with the clutch pedal partially engaged, as this will cause abnormal wear on the clutch. Refer to “Electronic Brake Control System/Hill Start Assistⴖ in “Starting and Operating” for further information. • Failure to press the clutch pedal fully to the floor may cause increased shift efforts, and may result in damage to the clutch and transmission.
STARTING AND OPERATING 275 Shifting CAUTION! Fully press the clutch pedal and lift your foot off the accelerator pedal before shifting gears. As you release the Always make sure the vehicle comes to a complete clutch pedal, lightly press the accelerator pedal. Damage stop before shifting into REVERSE. Failure to do so to the transmission or clutch may occur if you do not may result in transmission damage. fully press the clutch pedal and lift off of the accelerator pedal when shifting.
276 STARTING AND OPERATING Earlier upshifts during cruise conditions (relatively steady speeds) may result in increased fuel economy. Higher upshift speeds may be used to obtain a desired acceleration rate. NOTE: • Your vehicle is equipped with a transmission reverse inhibitor system. When vehicle speed is greater than 3 mph (5 km/h), the reverse inhibitor activates to help prevent shifts into REVERSE.
STARTING AND OPERATING 277 When the “1–4 Skip Shift Indicator Message” is displayed, the shift mechanism will only allow shifts from first gear to fourth gear. After you shift the transmission to fourth gear, you can press the clutch in and shift to another forward gear. Downshifting To maintain a safe speed and prolong brake life, downshift to maintain a safe speed when descending a steep grade. WARNING! Skipping more than one gear while downshifting, could cause you to lose control of your vehicle.
278 STARTING AND OPERATING AUTOMATIC TRANSMISSION — IF EQUIPPED CAUTION! Damage to the automatic transmission may occur if the following precautions are not observed: • Shift into PARK only after the vehicle has come to a complete stop. • Shift into or out of REVERSE only after the vehicle has come to a complete stop and the engine is at idle speed. • Do not shift between PARK, REVERSE, NEUTRAL, or DRIVE when the engine is above idle speed.
STARTING AND OPERATING 279 WARNING! (Continued) • Unintended movement of a vehicle could injure those in or near the vehicle. As with all vehicles, you should never exit a vehicle while the engine is running. Before exiting a vehicle, always apply the parking brake, shift the transmission into PARK, and turn the engine OFF. When the ignition is in the OFF position, the shift lever is locked in PARK, securing the vehicle against unwanted movement.
280 STARTING AND OPERATING The electronically-controlled transmission provides a precise shift schedule. The transmission electronics are self-calibrating; therefore, the first few shifts on a new vehicle may be somewhat abrupt. This is a normal condition, and precision shifts will develop within a few hundred miles (kilometers). Gear Ranges DO NOT race the engine when shifting from PARK or NEUTRAL into another gear range. PARK This range supplements the parking brake by locking the transmission.
STARTING AND OPERATING 281 WARNING! WARNING! (Continued) • Never use the PARK position as a substitute for the parking brake. Always apply the parking brake fully when parked to guard against vehicle movement and possible injury or damage. • Your vehicle could move and injure you and others if it is not completely in PARK. Check by trying to move the shift lever rearward (with the brake pedal released), after you have placed it in PARK. Make sure the transmission is in PARK before leaving the vehicle.
282 STARTING AND OPERATING WARNING! (Continued) WARNING! (Continued) • Unintended movement of a vehicle could injure those in or near the vehicle. As with all vehicles, you should never exit a vehicle while the engine is running. Before exiting a vehicle, always apply the parking brake, shift the transmission into PARK, and turn the engine off. When the ignition is in the OFF position, the shift lever is locked in the PARK, securing the vehicle against unwanted movement.
STARTING AND OPERATING 283 CAUTION! • Before moving the shift lever out of PARK, you must turn the ignition switch from the LOCK/OFF position to the ON/RUN position, and also press the brake pedal. Otherwise, damage to the shift lever could result. • DO NOT race the engine when shifting from PARK or NEUTRAL into another gear range, as this can damage the drivetrain. • With brake pedal released, verify that the shift lever will not move out of PARK. REVERSE This range is for moving the vehicle backward.
284 STARTING AND OPERATING WARNING! Do not coast in NEUTRAL and never turn off the ignition to coast down a hill. These are unsafe practices that limit your response to changing traffic or road conditions. You might lose control of the vehicle and have a collision. CAUTION! Towing the vehicle, coasting, or driving for any other reason with the transmission in NEUTRAL can result in severe transmission damage.
STARTING AND OPERATING 285 Transmission Limp Home Mode Transmission function is monitored electronically for abnormal conditions. If a condition is detected that could result in transmission damage, Transmission Limp Home Mode is activated. In this mode, the transmission remains in the current gear until the vehicle is brought to a stop. After the vehicle has stopped, the transmission will remain in second gear regardless of which forward gear is selected.
286 STARTING AND OPERATING Overdrive Operation The automatic transmission includes an electronically controlled Overdrive (fifth gear).
STARTING AND OPERATING 287 • The transmission will automatically downshift as the • An “UPSHIFT” message will appear in the Electronic vehicle slows (to prevent engine lugging) and will Vehicle Information Center (EVIC) portion of the indisplay the current gear. strument cluster when using AutoStick威, to alert the driver to upshift to the next gear. The “UPSHIFT” • The transmission will automatically downshift to first message will appear when approaching the maximum gear when coming to a stop.
288 STARTING AND OPERATING • Heavily pressing the accelerator pedal may generate SPORT MODE This vehicle is equipped with an electronic controlled an automatic downshift for improved acceleration. dampening system. This system reduces body roll and • This mode should be used for most driving situations. pitch in many driving situations including cornering, Sport acceleration and braking.
STARTING AND OPERATING 289 AUTO mode will be a more soft touring ride, where as SPORT will be a firmer, sportier suspension for better handling. SPORT mode also affects transmission shifting in either Auto or Manual mode. Refer to “AutoStick威” in “Starting And Operating” for further information. In Auto mode, the transmission has a sportier more aggressive shift pattern. In Manual mode, the transmission will hold gear at redline during manual shifting (shifter or paddle switches).
290 STARTING AND OPERATING WARNING! Rapid acceleration on slippery surfaces is dangerous. Unequal traction can cause sudden pulling of the rear wheels. You could lose control of the vehicle and possibly have a collision. Accelerate slowly and carefully whenever there is likely to be poor traction (ice, snow, wet mud, loose sand, etc.). Traction When driving on wet or slushy roads, it is possible for a wedge of water to build up between the tire and road surface.
STARTING AND OPERATING 291 CAUTION! • Due to lower ground clearance, driving your vehicle up steep driveways, approach ramps or near parking blocks may cause damage to the front fascia and ground effects. • Driving through snow more than 4 inches (100 mm) deep may cause damage to the front fascia and ground effects. Flowing/Rising Water WARNING! Do not drive on, or cross, a road or a path where water is flowing and/or rising (as in storm run-off).
292 STARTING AND OPERATING Shallow Standing Water Although your vehicle is capable of driving through shallow standing water, consider the following Caution and Warning before doing so. CAUTION! • Always check the depth of the standing water before driving through it. Never drive through standing water that is deeper than the bottom of the tire rims mounted on the vehicle.
STARTING AND OPERATING 293 WARNING! • Driving through standing water limits your vehicle’s traction capabilities. Do not exceed 5 mph (8 km/h) when driving through standing water. • Driving through standing water limits your vehicle’s braking capabilities, which increases stopping distances. Therefore, after driving through standing water, drive slowly and lightly press on the brake pedal several times to dry the brakes.
294 STARTING AND OPERATING system. This noise should be considered normal, and it checked if a leak is suspected, abnormal noises are apparent, and/or the system is not functioning as anticidoes not in any way damage the steering system. pated. Coordinate inspection efforts through an authoWARNING! rized dealer. Continued operation with reduced power steering assist could pose a safety risk to yourself and others. Service should be obtained as soon as possible.
STARTING AND OPERATING 295 If necessary, add fluid to restore to the proper indicated NOTE: level. With a clean cloth, wipe any spilled fluid from all • When the parking brake is applied and the transmission is placed in gear, the “Brake Warning Light” will surfaces. Refer to “Fluids, Lubricants, and Genuine flash. If vehicle speed is detected, a chime will sound Parts” in “Maintaining Your Vehicle” for further to alert the driver. Fully release the parking brake information.
296 STARTING AND OPERATING Manual Transmission – If Equipped The foot operated parking brake is positioned below the lower left corner of the instrument panel. To release the parking brake, pull the parking brake release handle. Automatic Transmission – If Equipped The foot operated parking brake is located below the lower left corner of the instrument panel. To apply the park brake, firmly push the park brake pedal fully.
STARTING AND OPERATING 297 WARNING! WARNING! (Continued) • Never use the PARK position as a substitute for the parking brake. Always apply the parking brake fully when parked to guard against vehicle movement and possible injury or damage. • When leaving the vehicle, always remove the key fob from the ignition and lock your vehicle. • Never leave children alone in a vehicle, or with access to an unlocked vehicle. Allowing children to be in a vehicle unattended is dangerous for a number of reasons.
298 STARTING AND OPERATING CAUTION! If the “Brake Warning Light” remains on with the parking brake released, a brake system malfunction is indicated. Have the brake system serviced by an authorized dealer immediately. OFF) the brakes will still function. The effort required to brake the vehicle will be much greater than that required with the power system operating.
STARTING AND OPERATING 299 is working properly. This self check occurs each time the vehicle is started and accelerated past 7 mph (11 km/h). ABS is activated during braking under certain road or stopping conditions. ABS-inducing conditions can include ice, snow, gravel, bumps, railroad tracks, loose debris, or panic stops.
300 STARTING AND OPERATING WARNING! (Continued) • The Anti-Lock Brake System (ABS) cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase braking or steering efficiency beyond that afforded by the condition of the vehicle brakes and tires or the traction afforded. • The Anti-Lock Brake System (ABS) cannot prevent collisions, including those resulting from excessive speed in turns, following another vehicle too closely, or hydroplaning.
STARTING AND OPERATING 301 If both the “Brake Warning Light” and the “ABS Warning Light” remain on, the ABS and EBD systems are not functioning. Immediate repair to the ABS system is required. Anti-Lock Brake System (ABS) This system aids the driver in maintaining vehicle control under adverse braking conditions by controlling hydraulic brake pressure. This prevents wheel lock-up to help avoid skidding on slippery surfaces during braking.
302 STARTING AND OPERATING Traction Control System (TCS) This system monitors the amount of wheel spin of each driven wheel. If wheel spin is detected, brake pressure is applied to the slipping wheel(s) and engine power is reduced to provide enhanced acceleration and stability. Brake Assist System (BAS) This system complements the ABS by optimizing the vehicle braking capability during emergency braking maneuvers.
STARTING AND OPERATING 303 WARNING! The BAS cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. The BAS cannot prevent collisions, including those resulting from excessive speed in turns, driving on very slippery surfaces, or hydroplaning. The capabilities of a BAS-equipped vehicle must never be exploited in a reckless or dangerous manner that could jeopardize the user’s safety or the safety of others.
304 STARTING AND OPERATING WARNING! There may be situations on minor hills (i.e., less than 8%), with a loaded vehicle, or while pulling a trailer, when the system will not activate and slight rolling may occur. This could cause a collision with another vehicle or object. Always remember the driver is responsible for braking the vehicle.
STARTING AND OPERATING 305 8. Rotate the steering wheel back to center and then an The ESC uses sensors in the vehicle to determine the path that the driver intends to steer the vehicle and compares additional half-turn to the right. it to the actual path of the vehicle. When the actual path 9. Turn the ignition switch to the OFF position and then does not match the intended path, the ESC applies the back to the ON position.
306 STARTING AND OPERATING WARNING! The Electronic Stability Control (ESC) cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. ESC cannot prevent accidents, including those resulting from excessive speed in turns, driving on very slippery surfaces, or hydroplaning. ESC also cannot prevent accidents resulting from loss of vehicle control due to inappropriate driver input for the conditions.
STARTING AND OPERATING 307 The “ESC Off” switch is located in the switch bank near the bottom center of the instrument panel. To enter the “Partial Off” mode, momentarily press the “ESC Off” switch and the “ESC Activation/Malfunction Indicator Light” will illuminate. To turn the ESC ON again, momentarily press the “ESC Off” switch and the “ESC Activation/Malfunction Indicator Light” will turn off.
308 STARTING AND OPERATING release the TRIP ODOMETER button located on the instrument cluster to clear this message. The “ESC OFF” message may appear in the Electronic Vehicle Information Center (EVIC). Refer to “Electronic Vehicle Information Center (EVIC)” in “Understanding Your Instrument Panel” for further information. To turn ESC ON again, momentarily press the “ESC Off” switch. NOTE: When the ESC is switched OFF, a feature of the system remains active.
STARTING AND OPERATING 309 ESC Activation/Malfunction Indicator Light and ESC OFF Indicator Light The “ESC Activation/Malfunction Indicator Light” in the instrument cluster will come on when the ignition switch is turned to the ON position. It should go out with the engine running. If the “ESC Activation/Malfunction Indicator Light” comes on continuously with the engine running, a malfunction has been detected in the ESC system.
310 STARTING AND OPERATING The “ESC OFF Indicator Light” indicates the TIRE SAFETY INFORMATION Electronic Stability Control (ESC) is off. Tire Markings Synchronizing ESC If the power supply is interrupted (battery disconnected or discharged), the “ESC Activation/Malfunction Indicator Light” may illuminate with the engine running. If this should occur, turn the steering wheel completely to the left and then to the right. The “ESC Activation/ Malfunction Indicator Light” should go out.
STARTING AND OPERATING 311 NOTE: • Temporary spare tires are spares designed for tempo• P (Passenger) - Metric tire sizing is based on U.S. rary emergency use only. Temporary high pressure design standards. P-Metric tires have the letter “P” compact spare tires have the letter “T” or “S” molded molded into the sidewall preceding the size designainto the sidewall preceding the size designation. Extion. Example: P215/65R15 95H. ample: T145/80D18 103M.
312 STARTING AND OPERATING Tire Sizing Chart TIRE SIZING TERMS Size Designation: P = Passenger Car tire size based on U.S. design standards ⴖ....blank....ⴖ = Passenger Car tire based on European design standards LT = Light Truck tire based on U.S. design standards T or S = Temporary compact spare tire 31 = Overall diameter in inches (in) 215 = Section width in millimeters (mm) 65 = Aspect ratio in percent (%) — Ratio of section height to section width of tire 10.
STARTING AND OPERATING 313 TIRE SIZING TERMS Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry H = Speed Symbol — A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions — The maximum speed corresponding to the speed symbol should only be achieved under specified operating conditions (i.e.
314 STARTING AND OPERATING Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire, however, the date code may only be on one side. Tires with white sidewalls will have the full TIN, including the date code, located on the white sidewall side of the tire. Look for the TIN on the outboard side of black sidewall tires as mounted on the vehicle. If the TIN is not found on the outboard side, then you will find it on the inboard side of the tire.
STARTING AND OPERATING 315 Tire Terminology and Definitions Term B-Pillar Cold Tire Inflation Pressure Maximum Inflation Pressure Recommended Cold Tire Inflation Pressure Tire Placard Definition The vehicle B-Pillar is the structural member of the body located behind the front door. Cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least 3 hours, or driven less than 1 mile (1.6 km) after sitting for a three hour period.
316 STARTING AND OPERATING Tire Loading And Tire Pressure Tire and Loading Information Placard Location NOTE: The proper cold tire inflation pressure is listed on the driver’s side B-Pillar or the rear edge of the driver’s side door.
STARTING AND OPERATING 317 axles must not be exceeded. For further information on 2. Determine the combined weight of the driver and GAWRs, vehicle loading, and trailer towing, refer to passengers that will be riding in your vehicle. “Vehicle Loading” in this section. 3. Subtract the combined weight of the driver and pasTo determine the maximum loading conditions of your sengers from XXX kg or XXX lbs. vehicle, locate the statement “The combined weight of 4.
318 STARTING AND OPERATING 5. Determine the combined weight of luggage and cargo NOTE: being loaded on the vehicle. That weight may not safely • The following table shows examples on how to calculate total load, cargo/luggage, and towing capacities exceed the available cargo and luggage load capacity of your vehicle with varying seating configurations calculated in Step 4. and number and size of occupants. This table is for 6.
STARTING AND OPERATING 319
320 STARTING AND OPERATING WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. TIRES — GENERAL INFORMATION Tire Pressure Proper tire inflation pressure is essential to the safe and satisfactory operation of your vehicle.
STARTING AND OPERATING 321 WARNING! (Continued) • Unequal tire pressures from one side of the vehicle to the other can cause the vehicle to drift to the right or left. • Always drive with each tire inflated to the recommended cold tire inflation pressure. Tire Inflation Pressures The proper cold tire inflation pressure is listed on the driver’s side “B” Pillar or rear edge of the driver’s side door.
322 STARTING AND OPERATING CAUTION! After inspecting or adjusting the tire pressure, always reinstall the valve stem cap. This will prevent moisture and dirt from entering the valve stem, which could damage the valve stem. Tire pressures change by approximately 1 psi (7 kPa) per 12°F (7°C) of air temperature change. Keep this in mind when checking tire pressure inside a garage, especially in the winter.
STARTING AND OPERATING 323 Tire Pressures For High Speed Operation Radial Ply Tires The manufacturer advocates driving at safe speeds WARNING! within posted speed limits. Where speed limits or conditions are such that the vehicle can be driven at high Combining radial ply tires with other types of tires speeds, maintaining correct tire inflation pressure is very on your vehicle will cause your vehicle to handle important. Increased tire pressure and reduced vehicle poorly.
324 STARTING AND OPERATING These low-profile high performance tires are not designed for off-road or winter (snow or cold weather) conditions, and their noise, ride, and wear will be different than non-performance tires. WARNING! Do not use these tires when temperatures are below 40°F (4°C) or in snow/ice conditions. You could lose control and have an accident resulting in serious injury or death. WARNING! Fast spinning tires can be dangerous.
STARTING AND OPERATING 325 Life Of Tire The service life of a tire is dependent upon varying factors including, but not limited to: • Driving style • Tire pressure • Distance driven WARNING! 1 — Worn Tire 2 — New Tire Tires and the spare tire should be replaced after six years, regardless of the remaining tread. Failure to follow this warning can result in sudden tire failure. You could lose control and have a collision resulting in serious injury or death.
326 STARTING AND OPERATING Replacement Tires The tires on your new vehicle provide a balance of many characteristics. They should be inspected regularly for wear and correct cold tire inflation pressure. The manufacturer strongly recommends that you use tires equivalent to the originals in size, quality and performance when replacement is needed. (Refer to the paragraph on “Tread Wear Indicators”). Refer to the “Tire and Loading Information” placard for the size designation of your tire.
STARTING AND OPERATING 327 WARNING! WARNING! (Continued) • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change suspension dimensions and performance characteristics, resulting in changes to steering, handling, and braking of your vehicle. This can cause unpredictable handling and stress to steering and suspension components. You could lose control and have a collision resulting in serious injury or death.
328 STARTING AND OPERATING CAUTION! CAUTION! (Continued) To avoid damage to your vehicle or tires, observe the following precautions: • Because of restricted chain clearance between tires and other suspension components, it is important that only chains in good condition are used. Broken chains can cause serious damage. Stop the vehicle immediately if noise occurs that could indicate chain breakage. Remove the damaged parts of the chain before further use.
STARTING AND OPERATING 329 Snow tires generally have lower speed ratings than what was originally equipped with your vehicle and should not be operated at sustained speeds over 75 mph (120 km/h). For speeds above 75 mph (120 km/h) refer to original equipment or an authorized tire dealer for SNOW TIRES recommended safe operating speeds, loading and cold Some areas of the country require the use of snow tires tire inflation pressures. during the winter.
330 STARTING AND OPERATING TIRE ROTATION RECOMMENDATIONS The tires on the front and rear of your vehicle operate at different loads and perform different steering, driving, and braking functions. For these reasons, they wear at unequal rates. Tire Rotation – Four Season/RSA Tires The suggested rotation method for vehicles equipped with all season tires is the “forward-cross” as shown in the following diagram. These effects can be reduced by timely rotation of tires.
STARTING AND OPERATING 331 Tire Rotation – F1 Three Season Tires The suggested rotation method is the “side-to-side” as shown in the following diagram. This method is required due to different size tires on the front and rear of the vehicle. Tire Rotation TIRE PRESSURE MONITOR SYSTEM (TPMS) The Tire Pressure Monitor System (TPMS) will warn the driver of a low tire pressure based on the vehicle recommended cold placard pressure. The tire pressure will vary with temperature by about 1 psi (6.
332 STARTING AND OPERATING The TPMS will warn the driver of a low tire pressure if the tire pressure falls below the low-pressure warning limit for any reason, including low temperature effects and natural pressure loss through the tire. The TPMS will continue to warn the driver of low tire pressure as long as the condition exists, and will not turn off until the tire pressure is at or above the recommended cold placard pressure.
STARTING AND OPERATING 333 CAUTION! • The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and warning have been established for the tire size equipped on your vehicle. Undesirable system operation or sensor damage may result when using replacement equipment that is not of the same size, type, and/or style. Aftermarket wheels can cause sensor damage.
334 STARTING AND OPERATING • Seasonal temperature changes will affect tire pressure, • Various TPMS messages, which display in the Elecand the TPMS will monitor the actual tire pressure in tronic Vehicle Information Center (EVIC), and the tire.
STARTING AND OPERATING 335 Should this occur, you should stop as soon as possible and inflate all of the tires with a low pressure condition (those flashing in the EVIC graphic) to the vehicle’s recommended cold placard pressure inflation value. Once the system receives the updated tire pressures, the system will automatically update, the graphic display in the EVIC will stop flashing, and the “TPM Telltale Light” will turn off.
336 STARTING AND OPERATING Service TPMS Warning If a system fault is detected, the “TPM Telltale Light” will flash on and off for 75 seconds and then remain on solid. The system fault will also sound a chime. In addition, the EVIC will display a ⬙SERVICE TPM SYSTEM⬙ message for a minimum of five seconds and then display dashes (- -) in place of the pressure value to indicate which sensor is not being received.
STARTING AND OPERATING 337 The EVIC will also display a ⬙SERVICE TPM SYSTEM⬙ message for a minimum of five seconds when a system fault related to an incorrect sensor location fault is detected. In this case, the ⬙SERVICE TPM SYSTEM⬙ message is then followed with a graphic display with pressure values still shown. This indicates that the pressure values are still being received from the TPM sensors but they may not be located in the correct vehicle 1.
338 STARTING AND OPERATING 5. Once you repair or replace the original road tire and reinstall it on the vehicle in place of the compact spare, the TPMS will update automatically. In addition, the “TPM Telltale Light” will turn OFF and the graphic in the EVIC will display a new pressure value instead of dashes (- -), as long as no tire pressure is below the low-pressure warning limit in any of the four active road tires. The 3.
STARTING AND OPERATING 339 The TPM sensors are regulated under one of the follow- as hard starting, stalling, and hesitations. If you experiing licenses: ence these symptoms, try another brand of gasoline before considering service for the vehicle. United States . . . . . . . . . . . . . . . . . . . MRXC4W4MA4 Over 40 auto manufacturers worldwide have issued and Canada . . . . . . . . . . . . . . . . . . . . .
340 STARTING AND OPERATING The manufacturer supports the use of reformulated gasolines. Properly blended reformulated gasolines will provide excellent performance and durability of engine and fuel system components. Gasoline/Oxygenate Blends Some fuel suppliers blend unleaded gasoline with oxygenates such as 10% ethanol, MTBE, and ETBE. Oxygenates are required in some areas of the country during the winter months to reduce carbon monoxide emissions.
STARTING AND OPERATING 341 To fix a Non-FFV vehicle inadvertently fueled once with of gasoline may not be indicated on the gasoline pump, therefore, you should ask your gasoline retailer whether E-85 perform the following: the gasoline contains MMT. It is even more important to • drain the fuel tank (see your authorized dealer) look for gasoline without MMT in Canada, because MMT can be used at levels higher than those allowed in the • change the engine oil and oil filter United States.
342 STARTING AND OPERATING Fuel System Cautions CAUTION! (Continued) CAUTION! Follow these guidelines to maintain your vehicle’s performance: • The use of leaded gas is prohibited by Federal law. Using leaded gasoline can impair engine performance and damage the emissions control system. • An out-of-tune engine or certain fuel or ignition malfunctions can cause the catalytic converter to overheat.
STARTING AND OPERATING 343 Carbon Monoxide Warnings WARNING! (Continued) WARNING! Carbon monoxide (CO) in exhaust gases is deadly. Follow the precautions below to prevent carbon monoxide poisoning: • Do not inhale exhaust gases. They contain carbon monoxide, a colorless and odorless gas, which can kill. Never run the engine in a closed area, such as a garage, and never sit in a parked vehicle with the engine running for an extended period.
344 STARTING AND OPERATING ADDING FUEL Fuel Filler Cap (Gas Cap) The gas cap is located behind the fuel filler door on the left side of the vehicle. Use a finger to pull open the door. If the gas cap is lost or damaged, be sure the replacement cap is for use with this vehicle. Fuel Fill Cap NOTE: When removing the fuel filler cap, lay the cap tether in the hook, located on the fuel filler door.
STARTING AND OPERATING 345 WARNING! • Never have any smoking materials lit in or near the vehicle when the gas cap is removed or the tank is being filled. • Never add fuel to the vehicle when the engine is running. • A fire may result if gasoline is pumped into a portable container that is inside of a vehicle. You could be burned. Always place gas containers on the ground while filling. NOTE: • Tighten the gas cap until you hear a “clicking” sound.
346 STARTING AND OPERATING VEHICLE LOADING • Vehicle Identification Number (VIN) The load carrying capacity of your vehicle is shown on the • Type of Vehicle “Vehicle Certification Label.” This information should be • Month Day and Hour of Manufacture (MDH) used for passenger and luggage loading as indicated. Do not exceed the specified Gross Vehicle Weight Rating The bar code allows a computer scanner to read the VIN. (GVWR) or the Gross Axle Weight Rating (GAWR).
STARTING AND OPERATING 347 WARNING! Because the front wheels steer the vehicle, it is important that you do not exceed the maximum front or rear GAWR. A dangerous driving condition can result if either rating is exceeded. You could lose control of the vehicle and have a collision. Overloading The load carrying components (axle, springs, tires, wheels, etc.) of your vehicle will provide satisfactory service as long as you do not exceed the GVWR and the front and rear GAWR.
348 STARTING AND OPERATING Loading To load your vehicle properly, first figure out its empty weight, axle-by-axle and side-by-side. Store heavier items down low and be sure you distribute their weight as evenly as possible. Stow all loose items securely before driving. If weighing the loaded vehicle shows that you have exceeded either GAWR, but the total load is within the specified GVWR, you must redistribute the weight.
STARTING AND OPERATING 349 Automatic Transmission — If Equipped Recreational towing (with rear wheels on the ground) is NOT ALLOWED. The only acceptable method for towing this vehicle (behind another vehicle) is on a vehicle trailer with all four wheels OFF the ground. Use of a towing dolly (with rear wheels on the ground) is NOT ALLOWED , as severe transmission damage will occur. Use of a towing dolly (with front wheels on the ground) is not recommended, as vehicle damage may occur.
350 STARTING AND OPERATING Manual transmission vehicles may also be towed using a Manual Transmission — If Equipped Vehicles with a manual transmission may be flat towed vehicle trailer (with all four wheels off the ground). (with all four wheels on the ground) under the following Use of a towing dolly is not recommended, as vehicle conditions: damage may occur. • The shift lever must be in NEUTRAL. • The towing speed must not exceed 65 mph (105 km/h). • There is no limitation on towing distance.
WHAT TO DO IN EMERGENCIES CONTENTS 䡵 Hazard Warning Flashers . . . . . . . . . . . . . . . . 352 ▫ Jump-Starting Procedure . . . . . . . . . . . . . . . 366 䡵 If Your Engine Overheats . . . . . . . . . . . . . . . . 352 䡵 Freeing A Stuck Vehicle . . . . . . . . . . . . . . . . . 368 䡵 TIREFIT Kit . . . . . . . . . . . . . . . . . . . . . . . . . 353 䡵 Shift Lever Override . . . . . . . . . . . . . . . . . . . 369 ▫ TIREFIT Storage . . . . . . . . . . . . . . . . . . . . . 354 䡵 Towing A Disabled Vehicle .
352 WHAT TO DO IN EMERGENCIES HAZARD WARNING FLASHERS The Hazard Warning flasher switch is located in the switch bank near the bottom center of the instrument panel. IF YOUR ENGINE OVERHEATS In any of the following situations, you can reduce the potential for overheating by taking the appropriate action. Press the switch to turn on the Hazard Warning • On the highways — slow down. flasher.
WHAT TO DO IN EMERGENCIES 353 CAUTION! Driving with a hot cooling system could damage your vehicle. If the temperature gauge reads 240°F (116 °C) or greater pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until the pointer drops back into the normal range 200– 230°F (93–110°C). If the pointer remains at 240°F (116°C) or greater and you hear a chime, turn the engine off immediately and call for service.
354 WHAT TO DO IN EMERGENCIES TIREFIT Storage The TIREFIT kit is located in the trunk. TIREFIT Kit Components And Operation 1. Sealant Bottle TIREFIT Location 2. Deflation Button 3. Pressure Gauge 4.
WHAT TO DO IN EMERGENCIES 355 5. Mode Select Knob 6. Sealant Hose (Clear) 7. Air Pump Hose (Black) 8. Power Plug Selecting Sealant Mode Turn the Mode Select Knob (5) to this position to inject the TIREFIT Sealant and to inflate the tire. Use the Sealant Hose (clear hose) (6) when selecting this mode. Using The Mode Select Knob And Hoses Your TIREFIT kit is equipped with the following symbols to indicate the air or sealant mode.
356 WHAT TO DO IN EMERGENCIES • For optimum performance, make sure the valve stem on the wheel is free of debris before connecting the • Replace the TIREFIT Sealant Bottle (1) and Sealant TIREFIT kit. Hose (6) prior to the expiration date (printed on the bottle label) to assure optimum operation of the sys- • You can use the TIREFIT air pump to inflate bicycle tires. The kit also comes with two needles, located in tem.
WHAT TO DO IN EMERGENCIES 357 WARNING! WARNING! (Continued) • Do not attempt to seal a tire on the side of the vehicle closest to traffic. Pull far enough off the road to avoid the danger of being hit when using the TIREFIT kit. • Do not use TIREFIT or drive the vehicle under the following circumstances: − If the puncture in the tire tread is approximately 1/4 in. (6 mm) or larger. − If the tire has any sidewall damage. − If the tire has any damage from driving with extremely low tire pressure.
358 WHAT TO DO IN EMERGENCIES WARNING! (Continued) • Take care not to allow the contents of TIREFIT to come in contact with hair, eyes, or clothing. TIREFIT is harmful if inhaled, swallowed, or absorbed through the skin. It causes skin, eye, and respiratory irritation. Flush immediately with plenty of water if there is any contact with eyes or skin. Change clothing as soon as possible, if there is any contact with clothing. • TIREFIT Sealant solution contains latex.
WHAT TO DO IN EMERGENCIES 359 (B) Setting Up To Use TIREFIT: 1. Turn the Mode Select Knob (5) to the Sealant Mode position. (C) Injecting TIREFIT Sealant Into The Deflated Tire: • Always start the engine before turning ON the TIREFIT kit. 2. Uncoil the Sealant Hose (6) and then remove the cap NOTE: Manual transmission vehicles must have the from the fitting at the end of the hose. parking brake engaged and the shift lever in NEUTRAL. 3.
360 WHAT TO DO IN EMERGENCIES Sealant Hose (6) to the valve stem. Check that the Mode If the sealant (white fluid) does flow through the Select Knob (5) is in the Sealant Mode position and not Sealant Hose (6): Air Mode. Press the Power Button (4) to turn On the 1. Continue to operate the pump until sealant is no TIREFIT kit. longer flowing through hose (typically takes 30 - 70 sec2. Connect the Power Plug (8) to a different 12 Volt onds).
WHAT TO DO IN EMERGENCIES 361 If the tire does not inflate to at least 26 psi (1.8 Bar) hose, and place the TIREFIT kit in the vehicle storage location. Quickly proceed to (D) “Drive Vehicle”. pressure within 15 minutes: • The tire is too badly damaged. Do not attempt to drive the vehicle further. Call for assistance. NOTE: If the tire becomes over-inflated, press the Deflation Button to reduce the tire pressure to the recommended inflation pressure before continuing.
362 WHAT TO DO IN EMERGENCIES WARNING! TIREFIT is not a permanent flat tire repair. Have the tire inspected and repaired or replaced after using TIREFIT. Do not exceed 55 mph (88 km/h) until the tire is repaired or replaced. Failure to follow this warning can result in injuries that are serious or fatal to you, your passengers, and others around you. 3. Uncoil the Air Pump Hose (7) (black in color) and screw the fitting at the end of hose (7) onto the valve stem. 4.
WHAT TO DO IN EMERGENCIES 363 2. Disconnect the TIREFIT kit from the valve stem, 2. Locate the round Sealant Bottle release button in the reinstall the cap on the valve stem and unplug from 12 recessed area under the sealant bottle. Volt outlet. 3. Press the Sealant Bottle release button. The Sealant 3. Place the TIREFIT kit in its proper storage area in the Bottle (1) will pop up. Remove the bottle and dispose of it accordingly. vehicle. 4. Have the tire inspected and repaired or replaced at the 4.
364 WHAT TO DO IN EMERGENCIES JUMP-STARTING PROCEDURES WARNING! If your vehicle has a discharged battery it can be jumpstarted using a set of jumper cables and a battery in Do not attempt jump-starting if the battery is frozen. another vehicle or by using a portable battery booster It could rupture or explode and cause personal injury. pack. Jump-starting can be dangerous if done improperly so please follow the procedures in this section carefully.
WHAT TO DO IN EMERGENCIES 365 WARNING! Remote Battery Posts 1 — Remote Positive (+) Post 2 — Remote Negative (-) Post • Take care to avoid the radiator cooling fan whenever the hood is raised. It can start anytime the ignition switch is on. You can be injured by moving fan blades. • Remove any metal jewelry such as watch bands or bracelets that might make an inadvertent electrical contact. You could be seriously injured.
366 WHAT TO DO IN EMERGENCIES 3. If using another vehicle to jump-start the battery, park the vehicle within the jumper cables reach, set the parking brake and make sure the ignition is OFF. WARNING! Do not allow vehicles to touch each other as this could establish a ground connection and personal injury could result. Jump-Starting Procedure WARNING! Failure to follow this procedure could result in personal injury or property damage due to battery explosion.
WHAT TO DO IN EMERGENCIES 367 WARNING! 8. Disconnect the opposite end of the positive (+) jumper cable from the positive (+) post of the booster battery. Do not connect the cable to the negative post (-) of the discharged battery. The resulting electrical spark could cause the battery to explode and could result in personal injury. 9. Disconnect the positive (+) end of the jumper cable from the remote positive (+) post of the discharged vehicle.
368 WHAT TO DO IN EMERGENCIES FREEING A STUCK VEHICLE If your vehicle becomes stuck in mud, sand, or snow, it can often be moved by a rocking motion. Turn your steering wheel right and left to clear the area around the front wheels. Then shift back and forth between REVERSE and DRIVE/1st Gear. Using minimal accelerator pedal pressure to maintain the rocking motion, without spinning the wheels, is most effective.
WHAT TO DO IN EMERGENCIES 369 WARNING! Fast spinning tires can be dangerous. Forces generated by excessive wheel speeds may cause damage, or even failure, of the axle and tires. A tire could explode and injure someone. Do not spin your vehicle’s wheels faster than 30 mph (48 km/h) or for longer than 30 seconds continuously without stopping when you are stuck and do not let anyone near a spinning wheel, no matter what the speed.
370 WHAT TO DO IN EMERGENCIES 3. Turn the ignition switch to the ON/RUN position (engine Off). 4. Press and maintain firm pressure on the brake pedal. 5. Using a screwdriver or similar tool, press and hold the override tab through the access port on the center console. Shift Lever Override Access Cover 6. Move the shift lever to the NEUTRAL position. 7. The vehicle may then be started in NEUTRAL. 8. Reinstall the shift lever override access cover.
WHAT TO DO IN EMERGENCIES 371 TOWING A DISABLED VEHICLE This section describes procedures for towing a disabled vehicle using a commercial wrecker service.
372 WHAT TO DO IN EMERGENCIES If the vehicle’s battery is discharged, see “Shift Lever Override” in “What To Do In Emergencies” for instructions on shifting the automatic transmission out of the PARK position for towing. CAUTION! • Do not attempt to use sling type equipment when towing. When securing the vehicle to a flatbed truck, do not attach to front or rear suspension components. Damage to your vehicle may result from improper towing.
WHAT TO DO IN EMERGENCIES 373 Manual Transmission The manufacturer recommends towing your vehicle with all four wheels OFF the ground using a flatbed. CAUTION! Failure to follow these towing methods can cause severe transmission damage. Such damage is not covered by the New Vehicle Limited Warranty.
MAINTAINING YOUR VEHICLE CONTENTS 䡵 Engine Compartment — 6.4L (392 HEMI) . . . . 378 ▫ Engine Oil Filter . . . . . . . . . . . . . . . . . . . . . 385 䡵 Onboard Diagnostic System — OBD II . . . . . . 379 ▫ Engine Air Cleaner Filter . . . . . . . . . . . . . . . 385 ▫ Loose Fuel Filler Cap . . . . . . . . . . . . . . . . . 379 ▫ Maintenance-Free Battery . . . . . . . . . . . . . . 386 䡵 Emissions Inspection And Maintenance Programs . . . . . . . . . . . . . . . . . . . . . . . . . . . .
376 MAINTAINING YOUR VEHICLE ▫ Brake System . . . . . . . . . . . . . . . . . . . . . . . 399 䡵 Bulb Replacement . . . . . . . . . . . . . . . . . . . . . 418 ▫ Clutch Hydraulic System (Manual Transmission) – If Equipped . . . . . . . . . . . . . 401 ▫ Low Beam Headlamp, High Beam Headlamp, Park/Turn Lamp — Models With Halogen Headlamps — If Equipped . . . . . . . 418 ▫ Manual Transmission – If Equipped . . . . . . . 401 ▫ Automatic Transmission – If Equipped . . . . . 402 ▫ Rear Axle . . . . . . . . .
MAINTAINING YOUR VEHICLE 377 ▫ License Lamp . . . . . . . . . . . . . . . . . . . . . . . 422 䡵 Fluid Capacities . . . . . . . . . . . . . . . . . . . . . . 423 䡵 Fluids, Lubricants, And Genuine Parts . . . . . . . 424 ▫ Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . 424 ▫ Chassis . . . . . . . . . . . . . . . . . . . . . . . . . . .
378 MAINTAINING YOUR VEHICLE ENGINE COMPARTMENT — 6.
MAINTAINING YOUR VEHICLE 379 ONBOARD DIAGNOSTIC SYSTEM — OBD II Your vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems. When these systems are operating properly, your vehicle will provide excellent performance and fuel economy, as well as engine emissions well within current government regulations.
380 MAINTAINING YOUR VEHICLE Trip Odometer button to turn off the message. If the Normally, the OBD II system will be ready. The OBD II problem continues, the message will appear the next time system may not be ready if your vehicle was recently serviced, recently had a dead battery or a battery replacethe vehicle is started. ment. If the OBD II system should be determined not A loose, improperly installed, or damaged fuel filler cap ready for the I/M test, your vehicle may fail the test.
MAINTAINING YOUR VEHICLE 381 4. Approximately 15 seconds later, one of two things will system to update. A recheck with the above test routine happen: may then indicate that the system is now ready. a. The MIL will flash for about 10 seconds and then return to being fully illuminated until you turn OFF the ignition or start the engine. This means that your vehicle’s OBD II system is not ready and you should not proceed to the I/M station.
382 MAINTAINING YOUR VEHICLE DEALER SERVICE Your authorized dealer has the qualified service personnel, special tools, and equipment to perform all service operations in an expert manner. Service Manuals are available which include detailed service information for your vehicle. Refer to these Service Manuals before attempting any procedure yourself. NOTE: Intentional tampering with emissions control systems may void your warranty and could result in civil penalties being assessed against you.
MAINTAINING YOUR VEHICLE 383 CAUTION! (Continued) • Your vehicle has been built with improved fluids that protect the performance and durability of your vehicle and also allow extended maintenance intervals. Do not use chemical flushes in these components as the chemicals can damage your engine, transmission, power steering or air conditioning. Such damage is not covered by the New Vehicle Limited Warranty.
384 MAINTAINING YOUR VEHICLE NOTE: Under no circumstances should oil change Engine Oil Viscosity (SAE Grade) intervals exceed 6,000 miles (10 000 km) or six months, SAE 5W-40 engine oil is preferred for use in all operating temperatures. whichever occurs first.
MAINTAINING YOUR VEHICLE 385 Disposing Of Used Engine Oil And Oil Filters Engine Air Cleaner Filter Care should be taken in disposing of used engine oil and Refer to the “Maintenance Schedule” for the proper oil filters from your vehicle. Used oil and oil filters, maintenance intervals. indiscriminately discarded, can present a problem to the WARNING! environment. Contact your authorized dealer, service station, or governmental agency for advice on how and The air induction system (air cleaner, hoses, etc.
386 MAINTAINING YOUR VEHICLE Engine Air Cleaner Filter Selection The quality of replacement engine air cleaner filters varies considerably. Only high quality filters should be used to assure most efficient service. MOPAR威 engine air cleaner filters are a high quality filter and are recommended. Maintenance-Free Battery Your vehicle is equipped with a maintenance-free battery. You will never have to add water, nor is periodic maintenance required.
MAINTAINING YOUR VEHICLE 387 WARNING! CAUTION! • Battery fluid is a corrosive acid solution and can burn or even blind you. Do not allow battery fluid to contact your eyes, skin, or clothing. Do not lean over a battery when attaching clamps. If acid splashes in eyes or on skin, flush the area immediately with large amounts of water. • Battery gas is flammable and explosive. Keep flame or sparks away from the battery.
388 MAINTAINING YOUR VEHICLE Air Conditioner Maintenance For best possible performance, your air conditioner should be checked and serviced by an authorized dealer at the start of each warm season. This service should include cleaning of the condenser fins and a performance test. Drive belt tension should also be checked at this time. CAUTION! Do not use chemical flushes in your air conditioning system as the chemicals can damage your air conditioning components.
MAINTAINING YOUR VEHICLE 389 Refrigerant Recovery And Recycling R-134a Air Conditioning Refrigerant is a hydrofluorocarbon (HFC) that is endorsed by the Environmental Protection Agency and is an ozone-saving product. However, the manufacturer recommends that air conditioning service be performed by authorized dealers or other service facilities using recovery and recycling equipment. concerned should be wiped clean to remove dust and grit; after lubricating excess oil and grease should be removed.
390 MAINTAINING YOUR VEHICLE Operation of the wipers on dry glass for long periods may cause deterioration of the wiper blades. Always use washer fluid when using the wipers to remove salt or dirt from a dry windshield. Adding Washer Fluid The windshield washer fluid reservoir is located in the front of the engine compartment. Be sure to check the fluid level in the reservoir at regular intervals.
MAINTAINING YOUR VEHICLE 391 WARNING! Commercially available windshield washer solvents are flammable. They could ignite and burn you. Care must be exercised when filling or working around the washer solution. Exhaust System The best protection against carbon monoxide entry into the vehicle body is a properly maintained engine exhaust system.
392 MAINTAINING YOUR VEHICLE CAUTION! • The catalytic converter requires the use of unleaded fuel only. Leaded gasoline will destroy the effectiveness of the catalyst as an emissions control device and may seriously reduce engine performance and cause serious damage to the engine. • Damage to the catalytic converter can result if your vehicle is not kept in proper operating condition.
MAINTAINING YOUR VEHICLE 393 To minimize the possibility of catalytic converter dam- Cooling System age: • Do not shut off the engine or interrupt the ignition, when the transmission is in gear and the vehicle is in motion. • Do not try to start the engine by pushing or towing the vehicle. • Do not idle the engine with any spark plug wires disconnected or removed, such as when diagnostic testing, or for prolonged periods during very rough idle or malfunctioning operating conditions.
394 MAINTAINING YOUR VEHICLE Coolant Checks Check the engine coolant (antifreeze) protection every 12 months (before the onset of freezing weather, where applicable). If coolant is dirty or rusty in appearance, the system should be drained, flushed, and refilled with fresh coolant. Check the front of the A/C condenser for any accumulation of bugs, leaves, etc. If dirty, clean by gently spraying water from a garden hose vertically down the face of the condenser. drain from the coolant recovery bottle.
MAINTAINING YOUR VEHICLE 395 CAUTION! • Mixing of coolants other than specified HOAT engine coolants may result in engine damage and may decrease corrosion protection. If a non-HOAT coolant is introduced into the cooling system in an emergency, it should be replaced with the specified coolant as soon as possible. • Do not use plain water alone or alcohol-based engine coolant (antifreeze) products.
396 MAINTAINING YOUR VEHICLE • Mix a minimum solution of 50% HOAT engine coolant and distilled water. Use higher concentrations (not to exceed 70%) if temperatures below ⫺34°F (⫺37°C) are anticipated. Cooling System Pressure Cap The cap must be fully tightened to prevent loss of coolant and to ensure that coolant will return to the radiator from the coolant recovery bottle.
MAINTAINING YOUR VEHICLE 397 WARNING! (Continued) • Do not use a pressure cap other than the one specified for your vehicle. Personal injury or engine damage may result. Disposal Of Used Coolant Used ethylene glycol-based engine coolant is a regulated substance requiring proper disposal. Check with your local authorities to determine the disposal rules for your community.
398 MAINTAINING YOUR VEHICLE • If frequent coolant additions are required, or if the level in the coolant recovery bottle does not drop when NOTE: When the vehicle is stopped after a few miles the engine cools, the cooling system should be pres(kilometers) of operation, you may observe vapor coming sure tested for leaks. from the front of the engine compartment.
MAINTAINING YOUR VEHICLE 399 Brake System In order to assure brake system performance, all brake system components should be inspected periodically. Refer to the “Maintenance Schedule” for the proper maintenance intervals. Check the fluid level in the master cylinder when performing underhood services. WARNING! Overfilling of fluid is not recommended because it may cause leaking in the system. Riding the brakes can lead to brake failure and possibly a collision.
400 MAINTAINING YOUR VEHICLE WARNING! WARNING! (Continued) • Use only manufacturer’s recommended brake fluid. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Your Vehicle” for further information. Using the wrong type of brake fluid can severely damage your brake system and/or impair its performance. The proper type of brake fluid for your vehicle is also identified on the original factory installed hydraulic master cylinder reservoir.
MAINTAINING YOUR VEHICLE 401 WARNING! (Continued) Manual Transmission – If Equipped Fluid Level Check Check the fluid level by removing the fill plug on the left side of the transmission. The fluid level should be at the bottom of the fill hole. Add fluid, if necessary, to maintain the proper level.
402 MAINTAINING YOUR VEHICLE Automatic Transmission – If Equipped policy is the use of special dyes to aid in detecting fluid leaks. In addition, avoid using transmission sealers as they may adversely affect seals. Selection Of Lubricant It is important that the proper lubricant is used in the transmission to assure optimum transmission perforCAUTION! mance. Use only manufacturer’s recommended transmission fluid.
MAINTAINING YOUR VEHICLE 403 CAUTION! • Using a transmission fluid other than the manufacturer’s recommended fluid may cause deterioration in transmission shift quality and/or torque converter shudder. Using a transmission fluid other than that recommended by the manufacturer will require more frequent fluid and filter changes. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Your Vehicle” for further information.
404 MAINTAINING YOUR VEHICLE Change Axle Fluid What Causes Corrosion? Refer to the “Maintenance Schedule” for the proper Corrosion is the result of deterioration or removal of maintenance intervals. paint and protective coatings from your vehicle. Appearance Care And Protection From Corrosion The most common causes are: Protection Of Body And Paint From Corrosion Vehicle body care requirements vary according to geographic locations and usage.
MAINTAINING YOUR VEHICLE 405 • If insects, tar, or other similar deposits have accumulated on your vehicle, use MOPAR威 Super Kleen Bug and Tar Remover or equivalent to remove. CAUTION! (Continued) • Use of power washers exceeding 1,200 psi (8 274 kPa) can result in damage or removal of paint and decals. • Use a high quality cleaner wax, such as MOPAR威 Cleaner Wax or equivalent to remove road film, stains and to protect your paint finish. Take care never to Special Care scratch the paint.
406 MAINTAINING YOUR VEHICLE • If your vehicle is damaged due to a collision or similar Wheel And Wheel Trim Care cause that destroys the paint and protective coating, • All wheels and wheel trim, especially aluminum and have your vehicle repaired as soon as possible. The chrome plated wheels, should be cleaned regularly cost of such repairs is considered the responsibility of with a mild soap and water to prevent corrosion. the owner.
MAINTAINING YOUR VEHICLE 407 Stain Repel Fabric Cleaning Procedure – If Interior Care Use MOPAR威 Fabric Cleaner or equivalent to clean fabric Equipped Stain Repel seats may be cleaned in the following man- upholstery and MOPAR威 Carpet Cleaner or equivalent ner: for carpeting. • Remove as much of the stain as possible by blotting Interior Trim should be cleaned starting with a damp with a clean, dry towel. cloth, or MOPAR威 Satin Select or equivalent. Do not use harsh cleaners or Armor All威.
408 MAINTAINING YOUR VEHICLE solvents, detergents, or ammonia-based cleaners to clean Do not use abrasive cleaning components, solvents, steel your leather upholstery. Application of a leather condi- wool or other aggressive material to clean the lenses. tioner is not required to maintain the original condition. Glass Surfaces All glass surfaces should be cleaned on a regular basis WARNING! with MOPAR威 Glass Cleaner or any commercial Do not use volatile solvents for cleaning purposes.
MAINTAINING YOUR VEHICLE 409 Cleaning Plastic Instrument Cluster Lenses The lenses in front of the instruments in this vehicle are molded in clear plastic. When cleaning the lenses, care must be taken to avoid scratching the plastic. If the belts need cleaning, use MOPAR威 Total Clean or equivalent, a mild soap solution, or lukewarm water. Do not remove the belts from the vehicle to wash them. Dry with a soft cloth. 1. Clean with a wet soft rag or micro-fiber towel.
410 MAINTAINING YOUR VEHICLE FUSES CAUTION! Integrated Power Module The Integrated Power Module is located in the engine compartment. This module contains fuses and relays. Integrated Power Module • When installing the integrated power module cover, it is important to ensure the cover is properly positioned and fully latched. Failure to do so may allow water to get into the integrated power module and possibly result in an electrical system failure.
MAINTAINING YOUR VEHICLE 411 Cavity 1 Cartridge Fuse — 2 — 3 — 4 — 5 — 6 — 7 — 8 — MiniFuse 15 Amp Blue 25 Amp Natural 25 Amp Natural 25 Amp Natural 15 Amp Blue 25 Amp Natural 25 Amp Natural 30 Amp Green Description Washer Motor Powertrain Control Module (PCM) Ignition Run/Start Cavity 9 10 11 12 EGR Solenoid/ Alternator Powertrain Control Module Ignition Coils/ Injectors Headlamp Washer Relay – If Equipped Starter 13 14 15 16 17 18 Cartridge Fuse — 30 Amp Pink 30 Amp Pink 40 Amp Gree
412 MAINTAINING YOUR VEHICLE Cavity 19 20 21 22 Cartridge Fuse — — — — MiniFuse — — — — Description — — — — Rear Power Distribution Center There is also a power distribution center located in the trunk under the spare tire access panel. This center contains fuses and relays.
MAINTAINING YOUR VEHICLE 413 CAUTION! • When installing the power distribution center cover, it is important to ensure the cover is properly positioned and fully latched. Failure to do so may allow water to get into the power distribution center and possibly result in an electrical system failure. • When replacing a blown fuse, it is important to use only a fuse having the correct amperage rating. The use of a fuse with a rating other than indicated may result in a dangerous electrical system overload.
414 MAINTAINING YOUR VEHICLE Cavity 6 Cartridge Fuse 30 Amp Pink — 7 — 8 — 5 9 — 10 — 11 * — MiniFuse — 20 Amp Yellow 15 Amp Blue 15 Amp Blue 20 Amp Yellow 25 Amp Natural — Description Heated Seats – If Equipped Fuel Pump Audio Amplifier – If Equipped Diagnostic Link Connector (DLC)/ Wireless Control Module (WCM)/ Wireless Ignition Node (WIN) Power Outlet Vacuum Pump – If Equipped — Cavity 12 * 13 * 14 Cartridge Fuse — — — MiniFuse — — 10 Amp Red 15 — 16 — 17 — 18 — 19 — 20 Am
MAINTAINING YOUR VEHICLE 415 Cavity 20 21 22 23 24 25 26 27 Cartridge Fuse — — — — — — — — 28 — MiniFuse — — — — — — — 10 Amp Red 10 Amp Red Description — — — — — — — Occupant Restraint Controller (ORC) Ignition Run, AC Heater Control/ Occupant Restraint Controller (ORC) Cavity 29 Cartridge Fuse — MiniFuse 5 Amp Orange 30 — 10 Amp Red 31 32 33 34 35 — — — — — — — — — 5 Amp Orange Description Cluster/Electronic Stability Program (ESP)/Powertrain Control Module (PCM)/STOP LIGHT Switch Door Mod
416 MAINTAINING YOUR VEHICLE Cavity 36 Cartridge Fuse — MiniFuse 25 Amp Natural 37 — 38 — 15 Amp Blue 10 Amp Red 39 — 40 — 41 42 — 30 Amp Pink 10 Amp Red 5 Amp Orange — — Description Cavity Hands-Free Phone – If Equipped/Radio/ Amplifier Feed Transmission 43 Cargo Light/Vehicle Information Module – If Equipped Heated Mirrors – If Equipped Auto Inside Rearview Mirror/Heated Seats – If Equipped/ Switch Bank — Front Blower Motor 44 Cartridge Fuse 30 Amp Pink 20 Amp Blue MiniFuse — — De
MAINTAINING YOUR VEHICLE 417 VEHICLE STORAGE REPLACEMENT BULBS If you are leaving your vehicle dormant for more than 21 days, you may want to take these steps to protect your LIGHT BULBS – Interior Bulb Number battery. Rear Courtesy/Reading Lamps . . . . . . . . . . . . . W5W Rear Compartment (Trunk) Lamp . . . . . . . . . . . . . 562 • Disconnect the negative cable from the battery. Overhead Console Reading Lamps . . . . . . . . . . . .
418 MAINTAINING YOUR VEHICLE LIGHT BULBS – Exterior Bulb Number Headlamp – High Intensity Discharge (HID) . . . . . D1S (Serviced at Authorized Dealer) Halogen Headlamp. . . . . . . . . . . . . . . . . . . . . . . H13 Front Park/Turn Lamp. . . . . . . . . . . . . . . . . . . 3157A Front Fog Lamp . . . . . . . . . . . . . . . . . . . . . 9145/H10 (Serviced at Authorized Dealer) Front Side Marker . . . . . . . . . . . . . . . . . . . . . . . . 168 Tail Lamp . . . . . . . . . . . . . . . . . . . . . . . . . .
MAINTAINING YOUR VEHICLE 419 WARNING! A transient high voltage occurs at the bulb sockets of HID headlamps when the headlamp switch is turned ON. It may cause serious electrical shock or electrocution if not serviced properly. See your authorized dealer for service. NOTE: • If a screwdriver is used, make sure a soft material is placed between the vehicle body and tool so not to scratch the paint. 2. Rotate the bulb’s socket counterclockwise, and remove the bulb and socket assembly from the housing. 3.
420 MAINTAINING YOUR VEHICLE Tail/Turn And Stop Lamp 1. Open the trunk. 2. Using a screwdriver, remove the tail lamp retainer. 4. Pull back the trunk liner. 5. Remove the remaining fasteners from the back of the tail lamp assembly. 3. Remove the fasteners from the back of the tail lamp 6. Pull the tail lamp assembly clear from the vehicle to access the bulbs. assembly.
MAINTAINING YOUR VEHICLE 421 11. Reinstall the bulb and socket assembly into the tail lamp assembly, and then turn it clockwise. 12. Reinstall the tail lamp assembly, fasteners, electrical connector, and trunk liner. 13. Reinstall tail lamp retainer. 7. Push the electrical connector locking tab to the side. 8. Disconnect the electrical connector. 9. Turn the appropriate bulb and socket assembly counterclockwise to remove it from the tail lamp assembly. 10.
422 MAINTAINING YOUR VEHICLE Center Tail/Backup Lamp See your authorized dealer for bulb replacement. Center High-Mounted Stop Lamp (CHMSL) The CHMSL uses LED lamps that are not serviceable separately. The CHMSL must be replaced as an assembly, see your authorized dealer. License Lamp 1. Remove the screws securing the lamp to the rear fascia. 2. Remove the bulb and socket assembly. 3. Disconnect the bulb from the socket assembly and install the replacement bulb. 1 — License Lamp Bulb 2 — Socket 4.
MAINTAINING YOUR VEHICLE 423 FLUID CAPACITIES Fuel (Approximate) Engine Oil with Filter 6.4 Liter Engine (SAE 5W-40, Synthetic API Certified) Cooling System * 6.4 Liter Engine (MOPAR威 Antifreeze/Coolant 5 Year/100,000 Mile Formula or equivalent) * Includes heater and coolant recovery bottle filled to MAX level. U.S. 19 Gallons Metric 72 Liters 7 Quarts 6.6 Liters 15 Quarts 14.
424 MAINTAINING YOUR VEHICLE FLUIDS, LUBRICANTS, AND GENUINE PARTS Engine Component Engine Coolant Engine Oil Engine Oil Filter Spark Plugs Fuel Selection Fluid, Lubricant, or Genuine Part MOPAR威 Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) or equivalent.
MAINTAINING YOUR VEHICLE 425 Chassis Component Manual Transmission – If Equipped Automatic Transmission – If Equipped Brake Master Cylinder Power Steering Reservoir Rear Axle Fluid, Lubricant, or Genuine Part MOPAR威 ATF+4威 Automatic Transmission Fluid or equivalent licensed ATF+4威 product. MOPAR威 ATF+4威 Automatic Transmission Fluid or equivalent licensed ATF+4威 product. MOPAR威 DOT 3, SAE J1703 should be used. If DOT 3, SAE J1703 brake fluid is not available, then DOT 4 is acceptable.
MAINTENANCE SCHEDULES CONTENTS 䡵 Maintenance Schedule . . . . . . . . . . . . . . . . . . 428 ▫ Required Maintenance Intervals . . . . . . . . . .
M A I N T E N A N C E 428 MAINTENANCE SCHEDULES MAINTENANCE SCHEDULE The Scheduled Maintenance services listed in this manual must be done at the times or mileages specified to protect your vehicle warranty and ensure the best vehicle performance and reliability. More frequent maintenance may be needed for vehicles in severe operating conditions, such as dusty areas and very short trip driving. Inspection and service should also be done S anytime a malfunction is suspected.
MAINTENANCE SCHEDULES 429 M A I N T E N A N C • Check the engine oil level. Refer to “Maintenance E • Change your engine oil more often if you drive your “Understanding Your Instrument Panel” or under “Instrument Cluster Description/Odometer/Trip Odomvehicle off-road for an extended period of time. eter” in “Understanding Your Instrument Panel” for • Under no circumstances should oil change intervals further information. exceed 6,000 miles (10,000 km) or six months, whichever comes first.
M A I N T E N A N C E 430 MAINTENANCE SCHEDULES Once a Month • Check tire pressure and look for unusual wear or • Change the engine oil filter. damage. • Inspect the brake hoses and lines. • Inspect the battery, and clean and tighten the terminals CAUTION! as required. • Check the fluid levels of the coolant reservoir, brake master cylinder, and power steering, and add as S C needed. H E • Check all lights and other electrical items for correct D operation.
MAINTENANCE SCHEDULES 431 M 6,000 Miles (10,000 km) or 6 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. Odometer Reading Repair Order # Signature, Authorized Service Center Date Dealer Code 12,000 Miles (20,000 km) or 12 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. ❏ If you are using your vehicle in dusty or off-road conditions, inspect the engine air cleaner filter, and replace if necessary.
M 432 MAINTENANCE SCHEDULES A I 18,000 Miles (30,000 km) or N T 18 Months Maintenance E Service Schedule N ❏ Change the engine oil and engine oil A filter. N ❏ Rotate tires. C ❏ Inspect the rear axle fluid. E 24,000 Miles (40,000 km) or 24 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. ❏ If you are using your vehicle in dusty or off-road conditions, inspect the engine air cleaner filter, and replace if necessary.
MAINTENANCE SCHEDULES 433 M 30,000 Miles (50,000 km) or 30 Months Maintenance Service Schedule 36,000 Miles (60,000 km) or 36 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. ❏ If you are using your vehicle in dusty or off-road conditions, inspect the engine air cleaner filter, and replace if necessary. ❏ Inspect the brake linings, and replace if necessary. ❏ Inspect the rear axle fluid.
M 434 MAINTENANCE SCHEDULES A I 42,000 Miles (70,000 km) or N T 42 Months Maintenance E Service Schedule N ❏ Change the engine oil and engine oil A filter. N ❏ Rotate tires.
MAINTENANCE SCHEDULES 435 M 48,000 Miles (80,000 km) or 48 Months Maintenance Service Schedule ❏ ❏ ❏ ❏ ❏ ❏ ❏ Change the engine oil and engine oil filter. Rotate tires. If you are using your vehicle in dusty or off-road conditions, inspect the engine air cleaner filter, and replace if necessary. Inspect the brake linings, and replace if necessary. Inspect the CV joints. Inspect the exhaust system.
M 436 MAINTENANCE SCHEDULES A I 54,000 Miles (90,000 km) or N T 54 Months Maintenance E Service Schedule N ❏ Change the engine oil and engine oil A filter. N ❏ Rotate tires. C ❏ Inspect the rear axle fluid. E 60,000 Miles (100,000 km) or 60 Months Maintenance Service Schedule ❏ ❏ ❏ ❏ ❏ ❏ ❏ Change the engine oil and engine oil filter. Rotate tires. Replace the engine air cleaner filter. Inspect the brake linings, and replace if necessary.
MAINTENANCE SCHEDULES 437 M 66,000 Miles (110,000 km) or 66 Months Maintenance Service Schedule 72,000 Miles (120,000 km) or 72 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. ❏ If you are using your vehicle in dusty or off-road conditions, inspect the engine air cleaner filter, and replace if necessary. ❏ Inspect the brake linings, and replace if necessary. ❏ Inspect the CV joints. ❏ Inspect the rear axle fluid. ❏ Inspect the exhaust system.
M 438 MAINTENANCE SCHEDULES A I 78,000 Miles (130,000 km) or N T 78 Months Maintenance E Service Schedule N ❏ Change the engine oil and engine oil A filter. N ❏ Rotate tires. C E 84,000 Miles (140,000 km) or 84 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. ❏ If you are using your vehicle in dusty or off-road conditions, inspect the engine air cleaner filter, and replace if necessary. ❏ Inspect the brake linings, and replace if necessary.
MAINTENANCE SCHEDULES 439 M 90,000 Miles (150,000 km) or 90 Months Maintenance Service Schedule 96,000 Miles (160,000 km) or 96 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. ❏ If you are using your vehicle in dusty or off-road conditions, inspect the engine air cleaner filter, and replace if necessary. ❏ Replace the spark plugs. ❏ Inspect the brake linings, and replace if necessary. ❏ Inspect the CV joints. ❏ Inspect the exhaust system.
M 440 MAINTENANCE SCHEDULES A I 102,000 Miles (170,000 km) or N T 102 Months Maintenance E Service Schedule N ❏ Change the engine oil and engine oil A filter. N ❏ Rotate tires. C ❏ Flush and replace the engine coolant if E not done at 60 months. S C H E D U L E S 8 Odometer Reading Repair Order # Signature, Authorized Service Center Date Dealer Code 108,000 Miles (180,000 km) or 108 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires.
MAINTENANCE SCHEDULES 441 M 114,000 Miles (190,000 km) or 114 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. Odometer Reading Repair Order # Signature, Authorized Service Center Date Dealer Code 120,000 Miles (200,000 km) or 120 Months Maintenance Service Schedule ❏ ❏ ❏ ❏ ❏ ❏ ❏ ❏ Change the engine oil and engine oil filter. Rotate tires. Replace the engine air cleaner filter. Inspect the brake linings, and replace if necessary.
M 442 MAINTENANCE SCHEDULES A I 126,000 Miles (210,000 km) or N T 126 Months Maintenance E Service Schedule N ❏ Change the engine oil and engine oil A filter. N ❏ Rotate tires. C ❏ Inspect the rear axle fluid. E S C H E D U L E S 8 Odometer Reading Repair Order # Signature, Authorized Service Center Date Dealer Code 132,000 Miles (220,000 km) or 132 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires.
MAINTENANCE SCHEDULES 443 M 138,000 Miles (230,000 km) or 138 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires.
M 444 MAINTENANCE SCHEDULES A I 144,000 Miles (240,000 km) or 144 Months Maintenance Service Schedule N ❏ Change the engine oil and engine oil filter. T E ❏ Rotate tires. N ❏ If you are using your vehicle in dusty or off-road conditions, inspect the engine air cleaner filter, and replace if necessary. A ❏ Inspect the brake linings, and replace if necessary. N ❏ Inspect the CV joints. C ❏ Inspect the exhaust system.
MAINTENANCE SCHEDULES 445 M 150,000 Miles (250,000 km) or 150 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. ❏ Replace the engine air cleaner filter. ❏ Adjust parking brake on vehicles equipped with four-wheel disc brakes.
M A I N T E N A N C E S C H E D U L E S 8 446 MAINTENANCE SCHEDULES * This maintenance is recommended by the manufacturer to the owner, but is not required to maintain emissions warranty. WARNING! • You can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent mechanic.
IF YOU NEED CONSUMER ASSISTANCE CONTENTS 䡵 Suggestions For Obtaining Service For Your Vehicle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 449 ▫ Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) . . . . . . . . . . . . 451 ▫ Prepare For The Appointment . . . . . . . . . . . 449 ▫ Service Contract . . . . . . . . . . . . . . . . . . . . . 451 ▫ Prepare A List . . . . . . . . . . . . . . . . . . . . . . 449 䡵 Warranty Information . . . . . . . . . . . . . . . . . .
448 IF YOU NEED CONSUMER ASSISTANCE 䡵 Department Of Transportation Uniform Tire Quality Grades . . . . . . . . . . . . . . . . . . . . . . . . 455 ▫ Treadwear . . . . . . . . . . . . . . . . . . . . . . . . . 455 ▫ Traction Grades . . . . . . . . . . . . . . . . . . . . . 455 ▫ Temperature Grades . . . . . . . . . . . . . . . . . .
IF YOU NEED CONSUMER ASSISTANCE 449 the service advisor and list the items in order of priority. At many authorized dealers, you may obtain a rental vehicle at a minimal daily charge. If you need a rental, it Prepare For The Appointment is advisable to make these arrangements when you call If you’re having warranty work done, be sure to have the for an appointment. right papers with you. Take your warranty folder. All work to be performed may not be covered by the IF YOU NEED ASSISTANCE warranty.
450 IF YOU NEED CONSUMER ASSISTANCE This is why you should always talk to an authorized Chrysler Group LLC Customer Center dealer’s service manager first. Most matters can be re- P.O. Box 21–8004 Auburn Hills, MI 48321–8004 solved with this process. Phone: (800) 423–6343 • If for some reason you are still not satisfied, talk to the general manager or owner of the authorized dealer- Chrysler Canada Inc. Customer Center P.O. Box 1621 ship. They want to know if you need assistance.
IF YOU NEED CONSUMER ASSISTANCE 451 Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) To assist customers who have hearing difficulties, the manufacturer has installed special TDD (Telecommunication Devices for the Deaf) equipment at its customer center. Any hearing or speech impaired customer, who has access to a TDD or a conventional teletypewriter (TTY) in the United States, can communicate with the manufacturer by dialing 1–800–380–CHRY.
452 IF YOU NEED CONSUMER ASSISTANCE We appreciate that you have made a major investment when you purchased the vehicle. An authorized dealer has also made a major investment in facilities, tools, and training to assure that you are absolutely delighted with the ownership experience. You’ll be pleased with their sincere efforts to resolve any warranty issues or related concerns.
IF YOU NEED CONSUMER ASSISTANCE 453 If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign. However, NHTSA cannot become involved in individual problems between you, your authorized dealer, and the manufacturer. In Canada If you believe that your vehicle has a safety defect, you should contact the Customer Service Department immediately.
454 IF YOU NEED CONSUMER ASSISTANCE • Service Manuals • Owner’s Manuals These comprehensive Service Manuals provide the These Owner’s Manuals have been prepared with the information that students and professional technicians assistance of service and engineering specialists to need in diagnosing/troubleshooting, problem solving, acquaint you with specific Chrysler Group LLC vemaintaining, servicing, and repairing Chrysler Group hicles. Included are starting, operating, emergency LLC vehicles.
IF YOU NEED CONSUMER ASSISTANCE 455 DEPARTMENT OF TRANSPORTATION UNIFORM TIRE QUALITY GRADES The following tire grading categories were established by the National Highway Traffic Safety Administration. The specific grade rating assigned by the tire’s manufacturer in each category is shown on the sidewall of the tires on your vehicle. significantly from the norm due to variations in driving habits, service practices, and differences in road characteristics and climate.
456 IF YOU NEED CONSUMER ASSISTANCE Temperature Grades The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat and its ability to dissipate heat, when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive temperature can lead to sudden tire failure.
INDEX 10
458 INDEX About Your Brakes . . . . . . . . . . . . . . . . . . . . 295,298 ABS (Anti-Lock Brake System) . . . . . . . . . . . . 298,301 Adding Engine Coolant (Antifreeze) . . . . . . . . . . 395 Adding Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . 344 Adding Washer Fluid . . . . . . . . . . . . . . . . . . . . . 390 Additives, Fuel . . . . . . . . . . . . . . . . . . . . . . . . . 341 Air Cleaner, Engine (Engine Air Cleaner Filter) . . . 385 Air Conditioner Maintenance . . . . . . . . . . . .
INDEX 459 Automatic Door Locks . . . . . . . . . . . . . . . . . . . . . 33 Automatic Headlights . . . . . . . . . . . . . . . . . . . . 141 Automatic Temperature Control (ATC) . . . . . . . . . 253 Automatic Transaxle Special Additives . . . . . . . . . . . . . . . . . . . . . 402 Automatic Transmission . . . . . . . . . . . . . 279,402,403 Adding Fluid . . . . . . . . . . . . . . . . . . . . 403,425 Autostick . . . . . . . . . . . . . . . . . . . . . . . . . . 286 Fluid and Filter Changes . . . . . . . .
460 INDEX Brightness, Interior Lights . . . . . . . . . . . . . . . . . . 145 Check Engine Light Bulb Replacement . . . . . . . . . . . . . . . . . . . . . 417,418 (Malfunction Indicator Light) . . . . . . . . . . . . . . . 380 Bulbs, Light . . . . . . . . . . . . . . . . . . . . . . . . . . 83,417 Checking Your Vehicle For Safety . . . . . . . . . . . . . 80 Checks, Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 Calibration, Compass . . . . . . . . . . . . . . . . . . . . .
INDEX 461 Connector UCI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242 Universal Consumer Interface (UCI) . . . . . . . 242 Console . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179 Console, Floor . . . . . . . . . . . . . . . . . . . . . . . . . . 179 Console, Overhead . . . . . . . . . . . . . . . . . . . . . . . 162 Contract, Service . . . . . . . . . . . . . . . . . . . . . . . . 451 Coolant Pressure Cap (Radiator Cap) . . . . . . . . . . 396 Cooling System . . . . . . .
462 INDEX Disabled Vehicle Towing . . . . . . . . . . . . . . . . . . . 371 Disposal Antifreeze (Engine Coolant) . . . . . . . . . . . . . 397 Engine Oil . . . . . . . . . . . . . . . . . . . . . . . . . 385 Door Locks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Door Locks, Automatic . . . . . . . . . . . . . . . . . . . . 33 Door Opener, Garage . . . . . . . . . . . . . . . . . . . . . 163 Driving On Slippery Surfaces . . . . . . . . . . . . . . . . . .
INDEX 463 Fails to Start . . . . . . . . . . . . . . . . . . . . . . . . 271 Flooded, Starting . . . . . . . . . . . . . . . . . . . . . 271 Fuel Requirements . . . . . . . . . . . . . . . . . . . . 339 Jump Starting . . . . . . . . . . . . . . . . . . . . . . . 364 Oil . . . . . . . . . . . . . . . . . . . . . . . . . 383,423,424 Oil Change Interval . . . . . . . . . . . . . . . . . . . 383 Oil Filler Cap . . . . . . . . . . . . . . . . . . . . . . . 384 Oil Filter . . . . . . . . . . . . . . . . . . . .
464 INDEX Fluid Level Checks Automatic Transmission . . . . . . . . . . . . . . . . 402 Brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 399 Cooling System . . . . . . . . . . . . . . . . . . . . . . 394 Engine Oil . . . . . . . . . . . . . . . . . . . . . . . . . 383 Power Steering . . . . . . . . . . . . . . . . . . . . . . 294 Fluid, Brake . . . . . . . . . . . . . . . . . . . . . . . . . . . 425 Fluids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INDEX 465 Speedometer . . . . . . . . . . . . . . . . . . . . . . . . 188 Headlights . . . . . . . . . . . . . . . . . . . . . . . . . . . . 418 Tachometer . . . . . . . . . . . . . . . . . . . . . . . . . 188 Automatic . . . . . . . . . . . . . . . . . . . . . . . . . 141 Bulb Replacement . . . . . . . . . . . . . . . . . . . . 418 Gear Ranges . . . . . . . . . . . . . . . . . . . . . . . . . . . 280 Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . 408 Gear Select Lever Override . . . . . .
466 INDEX HomeLink® (Garage Door Opener) Transmitter . . 163 Jump Starting . . . . . . . . . . . . . . . . . . . . . . . . . . 364 Hood Release . . . . . . . . . . . . . . . . . . . . . . . . . . 139 Key-In Reminder . . . . . . . . . . . . . . . . . . . . . . . . . 16 Ignition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Key, Programming . . . . . . . . . . . . . . . . . . . . . . . . 18 Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12,14 Key, Replacement . . . . . . . .
INDEX 467 Latches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 Hood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139 Lead Free Gasoline . . . . . . . . . . . . . . . . . . . . . . 339 Leaks, Fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 Life of Tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . 325 Light Bulbs . . . . . . . . . . . . . . . . . . . . . . . . . . 83,417 Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
468 INDEX Low Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . 197 Malfunction Indicator (Check Engine) . . . . . . 197 Map Reading . . . . . . . . . . . . . . . . . . . . . 144,162 Oil Pressure . . . . . . . . . . . . . . . . . . . . . . . . 192 Parade Mode (Daytime Brightness) . . . . . . . . 146 Passing . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144 Reading . . . . . . . . . . . . . . . . . . . . . . . . 144,162 Seat Belt Reminder . . . . . . . . . . . . . . . . . . .
INDEX 469 Manual Transmission . . . . . . . . . . . . . . . 273,401,403 Fluid Level Check . . . . . . . . . . . . . . . . . 401,403 Shift Speeds . . . . . . . . . . . . . . . . . . . . . . . . 275 Manual, Service . . . . . . . . . . . . . . . . . . . . . . . . . 453 Map/Reading Lights . . . . . . . . . . . . . . . . . . 144,162 Master Cylinder (Brakes) . . . . . . . . . . . . . . . . . . 399 Methanol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 340 Mini-Trip Computer . . . . . . . . . . . . .
470 INDEX Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . 385 Filter . . . . . . . . . . . . . . . . . . . . . . . . . . 385,424 Filter Disposal . . . . . . . . . . . . . . . . . . . . . . . 385 Materials Added to . . . . . . . . . . . . . . . . . . . 384 Recommendation . . . . . . . . . . . . . . . . . . 384,423 Synthetic . . . . . . . . . . . . . . . . . . . . . . . . . . 384 Viscosity . . . . . . . . . . . . . . . . . . . . . . . . 384,423 Onboard Diagnostic System . . . . . . . . . . . .
INDEX 471 Sunroof . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Power Steering Fluid . . . . . . . . . . . . . . . . . . . . . 425 Pregnant Women and Seat Belts . . . . . . . . . . . . . . 55 Pretensioners Seat Belts . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Programmable Electronic Features . . . . . . . . . . . . 213 Programming Transmitters (Remote Keyless Entry) . . . . . . . . . . . . . . . . . . . .
472 INDEX Restraints, Occupant . . . . . . . . . . . . . . . . . . . . . . 42 Rocking Vehicle When Stuck . . . . . . . . . . . . . . . . 368 Rotation, Tires . . . . . . . . . . . . . . . . . . . . . . . . . . 330 Safety Checks Inside Vehicle . . . . . . . . . . . . . . . . . 81 Safety Checks Outside Vehicle . . . . . . . . . . . . . . . 83 Safety Defects, Reporting . . . . . . . . . . . . . . . . . . 452 Safety Information, Tire . . . . . . . . . . . . . . . . . . . 310 Safety Tips . . . . . . . . . . . .
INDEX 473 Sentry Key Programming . . . . . . . . . . . . . . . . . . . 18 Sentry Key Replacement . . . . . . . . . . . . . . . . . . . 17 Service Assistance . . . . . . . . . . . . . . . . . . . . . . . 449 Service Contract . . . . . . . . . . . . . . . . . . . . . . . . . 451 Service Engine Soon Light (Malfunction Indicator) . . . . . . . . . . . . . . . . . . . . 197 Service Manuals . . . . . . . . . . . . . . . . . . . . . . . . 453 Setting the Clock . . . . . . . . . . . . . . . . . . . . .
474 INDEX Steering Column Controls . . . . . . . . . . . . . . . . . . . . . 143 Column Lock . . . . . . . . . . . . . . . . . . . . . . . 149 Power . . . . . . . . . . . . . . . . . . . . . . . . . . 293,294 Tilt Column . . . . . . . . . . . . . . . . . . . . . . . . 149 Wheel, Heated . . . . . . . . . . . . . . . . . . . . . . 150 Wheel, Tilt . . . . . . . . . . . . . . . . . . . . . . . . . 149 Steering Wheel Audio Controls . . . . . . . . . . . . . . 250 Steering Wheel Mounted Sound System Controls . .
INDEX 475 Chains . . . . . . . . . . . . . . . . . . . . . . . . . . . . 327 General Information . . . . . . . . . . . . . . . . . . 320 High Speed . . . . . . . . . . . . . . . . . . . . . . . . . 323 Inflation Pressures . . . . . . . . . . . . . . . . . . . . 321 Life of Tires . . . . . . . . . . . . . . . . . . . . . . . . 325 Load Capacity . . . . . . . . . . . . . . . . . . . . . . . 316 Pressure Monitor System (TPMS) . . . . . . . . . 331 Pressure Warning Light . . . . . . . . . . . . . . . .
476 INDEX Tread Wear Indicators . . . . . . . . . . . . . . . . . . . . 324 Trip Odometer . . . . . . . . . . . . . . . . . . . . . . . . . . 188 Trunk Lid (Deck Lid) . . . . . . . . . . . . . . . . . . . . 40,42 Trunk Release Remote Control . . . . . . . . . . . . . . . 40 Trunk Release, Emergency . . . . . . . . . . . . . . . . . . 42 Turn Signals . . . . . . . . . . . . . . . . . . . . . . . . . 143,190 Vehicle Loading . . . . . . . . . . . . . . . . . . .
INDEX 477 Wheel and Wheel Trim Care . . . . . . . . . . . . . . . . 406 Wind Buffeting . . . . . . . . . . . . . . . . . . . . . . . 40,173 Window Fogging . . . . . . . . . . . . . . . . . . . . . . . . 259 Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Windshield Defroster . . . . . . . . . . . . . . . . . . . 82,256 Windshield Washers . . . . . . . . . . . . . . . . 146,147,390 Fluid . . . . . . . . . . . . . . .
INSTALLATION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this vehicle’s electronic system to provide immunity to radio frequency signals. Mobile two-way radios and telephone equipment must be installed properly by trained personnel. The following must be observed during installation. The positive power connection should be made directly to the battery and fused as close to the battery as possible.
Chrysler Group LLC 12D492-126-AB 2nd Edition Printed in U.S.A.
