Specifications

This feature allows an iPod威 to be plugged into the
vehicle’s sound system through a 16–pin connector, using
the provided interface cable.
UCI supports Mini, 4G, Photo, Nano, 5G iPod威 and
iPhone威 devices. Some iPod威 software versions may not
fully support the UCI features. Please visit Apple’s
website for software updates.
NOTE:
• If the radio has a USB port, refer to the appropriate
Uconnect Multimedia radio user’s manual for iPod or
external USB device support capability.
• Connecting an iPod威 to the AUX port located in the
radio faceplate, plays media, but does not use the UCI
feature to control the connected device.
Connecting The iPod姞
Use the provided connection cable to connect an iPod威 to
the vehicle’s 16–pin connector port located on the center
console. Once the iPod威 is connected and synchronized
to the vehicle’s UCI system (iPod威 may take a few
seconds to connect), the iPod威 starts charging and is
ready for use by pressing radio switches, as described
below.
NOTE:
• It may be necessary to remove the connector pin
protection cap from the 16–pin connector port, prior to
connecting the cable.
• If the iPod威 battery is completely discharged, it may
not communicate with the UCI system until a mini-
mum charge is attained. Leaving the iPod威 connected
to the UCI system may charge it to the required level.
218 UNDERSTANDING YOUR INSTRUMENT PANEL