2008 Caravan 2008 OWNER’ S MANUAL 81-226-0819 First Edition Printed in U.S.A.
VEHICLES SOLD IN CANADA With respect to any Vehicles Sold in Canada, the name Chrysler LLC shall be deemed to be deleted and the name Chrysler Canada Inc. used in substitution therefor. DRIVING AND ALCOHOL Drunken driving is one of the most frequent causes of accidents. Your driving ability can be seriously impaired with blood alcohol levels far below the legal minimum. If you are drinking, don’t drive. Ride with a designated non-drinking driver, call a cab, a friend, or use public transportation.
TABLE OF CONTENTS SECTION PAGE .............................................................3 1 1 INTRODUCTION 2 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 4 UNDERSTANDING YOUR INSTRUMENT PANEL 5 STARTING AND OPERATING 6 WHAT TO DO IN EMERGENCIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .409 6 7 MAINTAINING YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INTRODUCTION CONTENTS m Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 m Vehicle Identification Number . . . . . . . . . . . . . . . 6 m How To Use This Manual . . . . . . . . . . . . . . . . . . 4 m Vehicle Modifications/Alterations . . . . . . . . . . . . 7 m Warnings And Cautions . . . . . . . . . . . . . . . . . . .
4 INTRODUCTION INTRODUCTION This Owner’s Manual has been prepared with the assistance of service and engineering specialists to acquaint you with the operation and maintenance of your vehicle. It is supplemented by a Warranty Information Booklet and various customer-oriented documents. You are urged to read these publications carefully. Following the instructions and recommendations in this manual will help assure safe and enjoyable operation of your vehicle.
INTRODUCTION 5 1
6 INTRODUCTION WARNINGS AND CAUTIONS This manual contains WARNINGS against operating procedures that could result in an accident or bodily injury. It also contains CAUTIONS against procedures that could result in damage to your vehicle. If you do not read this entire manual you may miss important information. Observe all Warnings and Cautions. VEHICLE IDENTIFICATION NUMBER The Vehicle Identification Number (VIN) is found on the left front corner of the instrument panel, visible through the windshield.
INTRODUCTION 7 VEHICLE MODIFICATIONS/ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2 CONTENTS m A Word About Your Keys . . . . . . . . . . . . . . . . . .12 m Remote Starting System — If Equipped . . . . . . . .28 ▫ Wireless Ignition Node (WIN) . . . . . . . . . . . . .12 ▫ How To Use Remote Start . . . . . . . . . . . . . . . .28 m Sentry Keyt Immobilizer System . . . . . . . . . . . . .15 m Door Locks . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 ▫ Replacement Keys . . . . . . . . . . . . . . . . . . . . . .
10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ▫ Power Sliding Side Door — If Equipped . . . . . .42 ▫ Seat Belt Pretensioners . . . . . . . . . . . . . . . . . . .64 ▫ Sliding Side Door Child Protection Lock . . . . . .46 ▫ Enhanced Seat Belt Use Reminder System (BeltAlertt) . . . . . . . . . . . . . . . . . . . . . . . . . .64 m Liftgate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48 ▫ Power Liftgate — If Equipped . . . . . . . . . . . . .49 m Storage Bin Safety Warning . . . . . .
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11 ▫ Restraining Infants And Small Children With Seat Delete Feature (Commercial Vehicles Only) . . . .90 ▫ Safety Checks You Should Make Inside The Vehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .93 m Engine Break-In Recommendations . . . . . . . . . . .93 ▫ Periodic Safety Checks You Should Make Outside The Vehicle . . . . . . . . . . . . . . . . . . . .94 m Safety Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS Your vehicle uses a keyless ignition system. This system consists of a Remote Keyless Entry (RKE) transmitter with integrated ignition Key and a Wireless Ignition Node (WIN) with integral ignition switch. You can insert the double-sided key into the ignition switch with either side up. Wireless Ignition Node (WIN) The Wireless Ignition Node (WIN) operates similar to an ignition switch.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 The valet key allows for entry into the vehicle should the battery in the vehicle or the transmitter go dead. The valet key is also for locking the glove box. You can keep the valet key with you when valet parking. 2 To remove the valet key from the transmitter, slide the mechanical latch at the top of the transmitter sideways with your thumb and then pull the key out with your other hand.
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. Insert the integrated ignition key into the ignition switch. 3. Turn the ignition switch to the START position and release it as soon as the starter engages. The starter motor will continue to run and will disengage automatically when the engine begins running. Ignition Key Removal Place the gear selector lever in PARK. Turn the ignition key to the OFF position and then remove the key.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Key-In-Ignition Reminder If you open the driver’s door with the integrated ignition key in the ignition, a chime will sound to remind you to remove the key. NOTE: The Key-In-Ignition reminder only sounds when the integrated ignition key is placed in the OFF or ACC position. SENTRY KEYT IMMOBILIZER SYSTEM The Sentry Keyt Immobilizer system prevents unauthorized vehicle operation by disabling the engine. The system does not need to be armed or activated.
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: • The Sentry Keyt Immobilizer system is not compatible with aftermarket remote starting systems. Use of these systems may result in vehicle starting problems and loss of security protection. • Exxon/Mobil Speedpass™, additional RKE transmitters, or any other transponder-equipped components on the same key chain will not cause a fault unless the additional part is physically held against the transmitter being used to start the vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE programming a blank transmitter to the vehicle electronics. A blank transmitter is one that has never been programmed. NOTE: When having the Sentry Keyt Immobilizer system serviced, bring all vehicle RKE transmitters with you to the authorized dealer. Customer Key Programming If you have two valid RKE transmitters with integrated keys, you can program new transmitters to the system by performing the following steps: 1.
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: If a programmed key is lost, see your authorized dealer to have all remaining keys erased from the system’s memory. This will prevent the lost key from starting your vehicle. The remaining keys must then be reprogrammed. All vehicle keys must be taken to an authorized dealer at the time of service to be reprogrammed. General Information The Sentry Keyt system complies with FCC rules Part 15 and with RSS-210 of Industry Canada.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Arming The System Remove the key from the ignition switch and either press a power door lock switch while the driver or passenger door is open or press the LOCK button on the Remote Keyless Entry (RKE) transmitter. After all the doors are locked and closed the Vehicle Security Alarm Indicator Light in the instrument cluster will flash rapidly to signal that the system is arming.
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE previously described arming sequences has occurred, the system will arm regardless of whether you are in the vehicle or not. If you remain in the vehicle and open a door, the alarm will sound. If this occurs, disarm the system. If the Security Alarm System is armed and the battery becomes disconnected, the system will remain armed when the battery is reconnected; the exterior lights will flash, the horn will sound, and the ignition will not start the vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE REMOTE KEYLESS ENTRY (RKE) — IF EQUIPPED This system allows you to lock or unlock the doors and liftgate, and activate the PANIC alarm, optional power liftgate, left power sliding door, and right power sliding door from distances up to about 23 ft (7 m) using a hand-held radio RKE transmitter. The RKE transmitter need not be pointed at the vehicle to activate the system.
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Seven-button transmitters will provide functions that allow the same basic operation as the three-button, but may also be used to OPEN/CLOSE the optional power liftgate, left power sliding door, or right power sliding door. Other options of the system allow you to turn ON/OFF the Sound Horn with Remote Lock and Flash Lights with Remote Key LOCK features.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 • For vehicles not equipped with the EVIC, the Remote UNLOCK feature can be enabled or disabled by performing the following procedure: Sound Horn With Remote Key Lock This feature will cause the horn to chirp when the doors are locked with the RKE transmitter. 1. Perform this operation while standing outside the vehicle. If desired, the Sound Horn with Remote Key Lock feature can be turned on and off by performing the following procedure: 2.
24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Using The PANIC Alarm To turn the PANIC Alarm feature ON or OFF, press and hold the PANIC button on the RKE transmitter for at least one second and release. When the PANIC Alarm is on, the headlights and park lights will flash, the horn will pulse on and off and the interior lights will turn on. Open/Close Power Liftgate — If Equipped Press the LIFTGATE button twice on the RKE transmitter within five seconds to Open/Close Power Liftgate.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Open/Close Power Left Power Sliding Door — If Equipped Press the Left Power Sliding Door button twice on the RKE transmitter within five seconds to Open/Close Power Left Power Sliding Door. If the button is pushed while the door is being power-closed, the door will reverse to the full open position.
26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The table below explains the Lamp Flash options. Which Turn Signal Lamps Lock All Unlock 1st Press Left Side Unlock All All Doors Left Side Left Side Right Side Right Side Liftgate All Function Number of Flashes 1 2 2 2 2 2 Programming Additional RKE Transmitters Refer to Sentry Keyt Immobilizer System “Customer Key Programming.” If you do not have a programmed RKE transmitter, contact your authorized dealer for details.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27 General Information This device complies with part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference received, including interference that may cause undesired operation. If your RKE transmitter fails to operate from a normal distance, check for these two conditions. Battery Replacement 2.
28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE REMOTE STARTING SYSTEM — IF EQUIPPED Remote Starting conveniently starts the engine from outside the vehicle by using the Remote Keyless Entry (RKE) transmitter while maintaining the Security Alarm System. The Remote Starting System has a targeted range of 328 ft (100 m). In order to Remote Start your vehicle, the hood, liftgate, and all the doors must be closed and the transmission gear selector lever in PARK.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Enter Remote Start Mode 29 honk twice (if programmed). Then, the engine will start and the vehicle will remain in the Remote Start mode for a 15 minute cycle. NOTE: • If your power door locks were unlocked, Remote Start will automatically LOCK the doors. • The park lights will turn on and remain on during Remote Start mode. • For security, power window and power sunroof operation (if so equipped) are disabled when the vehicle is in the Remote Start mode.
30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Enter the Vehicle After Remote Start To enter the vehicle while the engine is running during a Remote Start, you must first unlock the vehicle using the UNLOCK button on the transmitter. After the vehicle is unlocked, you have 60 seconds to enter the vehicle, insert the key into the ignition switch and move it to the RUN position, otherwise the engine will cancel Remote Starting and automatically turn off.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Turn Off the Engine While in Remote Start Mode Press and release the Remote Start button one time. NOTE: To avoid inadvertent shut downs, the system will disable the one time press of the Remote Start button for two seconds after receiving a valid Remote Start request. When To Reset Remote Start The vehicle can be started remotely up to a maximum of two times.
32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If the lock plunger is down when you shut the door, the door will lock. Therefore, make sure the keys are not inside the vehicle before closing the door. WARNING! • For personal security and safety in the event of an accident, lock the vehicle doors as you drive as well as when you park and leave the vehicle. • When leaving the vehicle always remove the key and from the ignition lock, and lock your vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 chime will sound if the key is in the ignition switch and a door is open, as a reminder to remove the key. 2 Driver Power Door Locks 1 - Unlock 2 - Lock If you press the power door lock switch while the key is in the ignition, and any front door is open, the power locks will not operate. This prevents you from accidentally locking your keys in the vehicle. Removing the key or closing the door will allow the locks to operate.
34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Lock Doors Automatically — If Equipped If the Lock Doors Automatically feature is enabled, your door locks will lock automatically when the vehicle’s speed exceeds 15 mph (24 km/h).
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The Lock Doors Automatically at 15 mph (24 km/h) feature can be reactivated by repeating the above mentioned procedure or by performing the procedure in the EVIC, Customer Programmable Features section on vehicles so equipped. Unlock Doors Automatically On Exit — If Equipped The Unlock Doors Automatically On Exit feature unlocks all of the doors of the vehicle when any door is opened.
36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 7. To reactivate this feature, repeat the above steps. WINDOWS 8. If a chime is not heard, the program mode was canceled before the feature could be changed. If necessary, repeat the above procedure. POWER VENT WINDOWS — IF EQUIPPED Switches on the driver’s door trim panel let the driver operate the two vent windows from the driver’s seat.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE POWER WINDOWS You can control all windows using switches on the driver’s door trim panel. The switches will operate only when the ignition switch is in the ON or ACC position and during power accessory delay. 37 Driver’s Master Power Window Switches 2 NOTE: Power Window switches will also remain active for up to 90 seconds after the ignition switch has been turned OFF, depending upon the accessory delay setting.
38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Power Window Lockout Switch — If Equipped The driver may lock out all power windows by depressing the bar switch just below the power window switches. Power Window Lockout Switch Front Passenger Power Window Switch There is a single switch on the front passenger’s door trim panel which operates the passenger door window and locks and unlocks all doors.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Sliding Side Door Power Window Switch There is a single switch on each sliding side door which operates the sliding side door window. The switches will operate only when the ignition switch is in the ON or ACC position. 39 NOTE: The sliding door windows do not fully open, stopping several inches above the window sill. Auto Down Feature — If Equipped The left and right front window switches may be equipped with an auto down feature.
40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Auto Up Feature With Anti–Pinch Protection — If Equipped The left front window switch may be equipped with an Auto Up feature. Lift the window switch to the second detent, release, and the window will go up automatically. To stop the window from going all the way up during the Auto Up operation, push down on the switch briefly. To close the window part way, lift the window switch to the first detent and release when you want the window to stop.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. Push the window switch down firmly to the second detent to open the window completely and continue to hold the switch down for an additional two seconds after the window is fully open. Wind Buffeting Wind buffeting can be described as the perception of pressure on the ears or a helicopter-type sound in the ears. Your vehicle may exhibit wind buffeting with the windows down, or the sunroof (if equipped) in certain open or partially open positions.
42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • There is a hold-open latch that is activated when the sliding door is fully opened. This latch will keep your sliding door open on any incline. To close the sliding door after the hold-open latch is activated, you must rock the inside handle forward or pull outward on the outside handle. Always make sure that the sliding door is fully latched anytime the vehicle is in motion. NOTE: The left side sliding door cannot be opened while the fuel door is open.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: The power sliding side door must be unlocked before the power sliding door switches will operate. 43 If the inside or outside door handles are used while the power sliding side door is activated, the power sliding door feature will be canceled and the door must be opened or closed manually.
44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • If the power sliding side door is not in the full open or close position, it will fully open when a power sliding door switch is pressed. To close the door, wait until it is fully open and then press the switch again. • The power sliding side door switches will not operate if the transmission gear selector lever is in gear or the vehicle speed is above 0 mph (0 km/h).
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45 You can turn the feature back on by repeating the above mentioned procedure. Power Sliding Side Door Master Lock Switch The power sliding side doors may also be opened by pressing the switches on the overhead console or the switches located on the trim panel just in front of the sliding door.
46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Sliding Side Door Child Protection Lock To provide a safer environment for small children riding in the rear seats, the sliding doors are equipped with a child protection door lock system. 2. Slide the child lock control inward (toward the vehicle) to engage the Child Protection Door Lock. NOTE: When the child lock system is engaged, the door can be opened only by using the outside door handle even though the inside door lock is in the unlocked position.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: • After engaging the Child Protection Door Lock, always test the door from the inside to make certain it is in the desired position.
48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE LIFTGATE On vehicles equipped with power locks, the liftgate can be unlocked using the Remote Keyless Entry (RKE) transmitter button, or by activating the power door lock switches located on the front doors. To open the liftgate, depress the liftgate release handle located on the underside of the license plate bar and pull the liftgate open with one fluid motion.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE POWER LIFTGATE — IF EQUIPPED The power liftgate may be opened manually or by using the button on the Remote Keyless Entry (RKE) transmitter. Press the button on the transmitter twice within five seconds, to open the power liftgate. When the liftgate is fully open, pressing the button twice within five seconds, a second time, will close the liftgate.
50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The power liftgate may be closed by pressing the button, located in the upper left trim in the liftgate opening. Pushing once will only close the liftgate. This button cannot be used to open the liftgate. WARNING! During power operation, personal injury or cargo damage may occur. Ensure the liftgate travel path is clear. Make sure the liftgate is closed and latched before driving away.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 • The power liftgate must be in the full open or close positions for any of the buttons to operate. If the liftgate is not in the full open or close positions, it must be opened or closed manually. • If the power liftgate encounters multiple obstructions within the same cycle, the system will automatically stop and must be opened or closed manually.
52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Gas props support the liftgate in the open position. However, because the gas pressure drops with temperature, it may be necessary to assist the props when opening the liftgate in cold weather. STORAGE BIN SAFETY WARNING Safety Warnings WARNING! Always close the storage bin covers when your vehicle is unattended. Do not allow children to have access to the second row seat storage bins. Once in the storage bin, young children may not be able to escape.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 NOTE: Your vehicle may be built with a release strap or release lever attached to the Storage Bin Cover latch mechanism. 2 Storage Bin Cover Emergency Release Lever — If Equipped As a security measure, your vehicle may be built with a Storage Bin Cover Emergency Release lever built into the storage bin cover latching mechanism.
54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Storage Bin Cover Emergency Release Strap — If Equipped As a security measure, your vehicle may be built with a Storage Bin Cover Emergency Release strap built into the storage bin cover latching mechanism. NOTE: In the event of an individual being locked inside the storage bin, the storage bin cover can be opened from inside of the bin by pulling on the glow-in-the-dark strap attached to the storage bin cover latching mechanism.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 OCCUPANT RESTRAINTS Some of the most important safety features in your vehicle are the restraint systems: • Three-point lap and shoulder belts for all seating positions • Pretensioning and load-limiting retractors for the front seat belts • Advanced multistage driver and new active-vent front passenger airbags Reinstalling Storage Bin Cover Emergency Release Strap NOTE: Do not use the storage bin emergency release strap to lift the storage bin cover.
56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • All seat belt systems (except the driver’s, Swivel n’ Go, and third row center position) include Automatic Locking Retractors (ALRs), which lock the seat belt webbing into position by extending the belt all the way out and then adjusting the belt to the desired length to restrain a child seat or secure a large item in a seat.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Research has shown that seat belts save lives, and they can reduce the seriousness of injuries in a collision. Some of the worst injuries happen when people are thrown from the vehicle. Seat belts reduce the possibility of ejection and the risk of injury caused by striking the inside of the vehicle. Everyone in a motor vehicle should be belted at all times. Lap/Shoulder Belts All seats in your vehicle are equipped with Lap/ Shoulder Belts.
58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! WARNING! • Wearing a seat belt incorrectly is dangerous. Seat belts are designed to go around the large bones of your body. These are the strongest parts of your body and can take the forces of a collision the best. Two people should never be belted into a single seat belt. People belted together can crash into one another in a collision, hurting one another badly.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. The seat belt latch plate is near the seatback of the front seats and next to your arm in the rear seats. Grasp the latch plate and pull out the belt. Slide the latch plate up the webbing as far as necessary to allow the belt to go around your lap. 59 WARNING! A belt that is worn under your arm is very dangerous. Your body could strike the inside surfaces of the vehicle in a collision, increasing head and neck injury.
60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click”. WARNING! • A belt that is buckled into the wrong buckle will not protect you properly. The lap portion could ride too high on your body, possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • A belt that is too loose will not protect you as well.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 4. Position the lap belt across your thighs, below your abdomen. To remove slack in the lap belt portion, pull up on the shoulder belt. To loosen the lap belt if it is too tight, tilt the latch plate and pull on the lap belt. A snug belt reduces the risk of sliding under the belt in a collision. 61 WARNING! • A lap belt worn too high can increase the risk of internal injury in a collision.
62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 6. To release the belt, push the red button on the buckle. The belt will automatically retract to its stowed position. If necessary, slide the latch plate down the webbing to allow the belt to retract fully. WARNING! A frayed or torn belt could rip apart in a collision and leave you with no protection. Inspect the belt system periodically, checking for cuts, frays, or loose parts. Damaged parts must be replaced immediately.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE pushing anywhere on the anchorage. To move the anchorage downward, squeeze the actuation buttons while simultaneously pushing down on the anchorage assembly. As a guide, if you are shorter than average you will prefer a lower position, and if you are taller than average you will prefer a higher position. When you release the anchorage, try to move it up or down to make sure that it is locked in position.
64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Seat Belt Pretensioners The seat belts for both front seating positions are equipped with pretensioning devices that are designed to remove slack from the seat belt in the event of a collision. These devices improve the performance of the seat belt by assuring that the belt is tight about the occupant early in a collision. Pretensioners work for all size occupants, including those in child restraints.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: The following steps must occur within the first 60 seconds of the ignition switch being turned to the ON or START position. DaimlerChrysler does not recommend deactivating BeltAlertt. 1. With all doors closed and the ignition switch in any position except ON or START, buckle the driver’s seat belt. 2. Turn the ignition switch to the ON position (engine does not need to be running), and wait for the Seat Belt Warning Light to turn off. 3.
66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Seat Belt Extender If a seat belt is too short, even when fully extended and when the adjustable upper shoulder belt anchorage (if equipped) is in its lowest position, your authorized dealer can provide you with a seat belt extender. This extender should be used only if the existing belt is not long enough. When it is not required, remove the extender and stow it.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE window. If the vehicle is equipped with SABIC air bags, they are located above the side windows and their covers are also labeled: SRS AIRBAG. NOTE: Airbag covers may not be obvious in the interior trim; but they will open to allow airbag deployment.
68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The first stage inflator is triggered immediately during an impact that requires airbag deployment. The timing of the second stage determines whether the output force is low, medium, or high. If a low output is sufficient to meet the need, the second stage is expended later in the crash event. Driver Airbag Special Features Driver airbag deployment and force level is controlled by the driver’s seat position as well as impact severity.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 69 WARNING! • Do not put anything on or around the airbag covers or attempt to open them manually. You may damage the airbags and you could be injured because the airbag inflation capability may be compromised. The protective covers for the airbag cushions are designed to open only when the airbags are inflating. Thorax Airbag Label When the airbag deploys, it opens the seam between the front and side of the seat’s trim cover.
70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Supplemental Side Airbag Inflatable Curtain (SABIC) — If Equipped SABIC Airbags offer side-impact and vehicle rollover protection to front and rear seat outboard occupants in addition to that provided by the body structure. Each airbag features inflated chambers placed adjacent to the head of each outboard occupant that reduce the potential for side-impact head injuries. The curtains deploy downward, covering both windows on the impact side.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE moderate to severe side collisions. In certain types of collisions, both the front and side airbags may be triggered. However, even in collisions where the airbags work, you need the seat belts to keep you in the right position for the airbags to protect you properly. Here are some simple steps you can take to minimize the risk of harm from a deploying airbag. 1. Children 12 years old and younger should always ride buckled up in a rear seat.
72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 4. If your vehicle has side airbags, do not lean against the door, airbags will inflate forcefully into the space between you and the door. 5. If the airbag system in this vehicle needs to be modified to accommodate a disabled person, contact the Customer Center. Phone numbers are provided under (If You Need Assistance( in Section 9 of this manual. WARNING! Relying on the airbags alone could lead to more severe injuries in a collision.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE impact sensors signals, a central electronic ORC deploys the front airbags, side inflatable airbag curtains, side seat thorax airbags, and front seat belt pretensioners as required for each type of impact. The ORC monitors the readiness of the electronic parts of the system whenever the ignition switch is in the START or ON position.
74 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Front and Side Impact Sensors Impact Sensors trigger airbag deployment in front and side impacts, and aid the ORC in determining appropriate response to impact events. Additional sensors in the ORC determine the level of airbag deployment and provide verification.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Turns on the interior lights, which remain on as long as the battery has power or until the ignition key is removed. • Unlocks the doors automatically. If A Deployment Occurs The airbag systems are designed to deploy when the Occupant Restraint Controller (ORC) detect a moderateto-severe collision, to help restrain the driver, front passenger and rear passengers, and then immediately deflate.
76 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE irritation, move to fresh air. If the irritation continues, see your doctor. If these particles settle on your clothing, follow the garment manufacturer’s instructions for cleaning. • It is not advisable to drive your vehicle after the airbags have deployed. If you are involved in another collision, the airbags will not be in place to protect you. WARNING! Deployed airbags and seat belt pretensioners cannot protect you in another collision.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! Do not attempt to modify any part of your advanced airbag system. The airbag may inflate accidentally or may not function properly if modifications are made. Take your vehicle to an authorized dealer for any advanced airbag system service. If your seat, including your trim cover and cushion, needs to be serviced in any way (including removal or loosening/ tightening of seat attachment bolts), take the vehicle to your authorized dealer.
78 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE located on the inside of the fuse block cover for the proper airbag fuses. See your authorized dealer if the fuse is good. 2. Under certain circumstances, EDR data may not be recorded (e.g., loss of battery power).
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE accessing the electronic data stored, unless ordered to download data by a court with legal jurisdiction (i.e., pursuant to a warrant). A copy of the data will be provided to the custodial entity upon request. General data that does not identify particular vehicles or crashes may be released for incorporation in aggregate crash databases, such as those maintained by the U.S. government and various states.
80 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Engine control status (including engine speed) • Transmission gear selection • Cruise control status • Traction/stability control status • Tire pressure monitoring system status – if equipped Integrated Child Seat — If Equipped Operating instructions for the second row bench seat with Integrated Child Seat are included with the seat. If the instructions are not with the seat or in the Owner’s Manual Package, replacement instruction can be obtained.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Child Restraints Everyone in your vehicle needs to be buckled up at all times — babies and children, too. Every state in the United States and all Canadian provinces require that small children ride in proper restraint systems. This is the law, and you can be prosecuted for ignoring it. Children 12 years and younger should ride properly buckled up in a rear seat.
82 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Safety experts recommend that children ride rearward-facing in the vehicle until they are at least one year old and weigh at least 20 lbs (9 kg). Two types of child restraints can be used rearward-facing: infant carriers and 9convertible9 child seats. Both types of child restraints are held in the vehicle by the lap/ shoulder belt or the LATCH child restraint anchorage system. Refer to “Lower Anchors and Tether for CHildren (LATCH)” later in this section.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 83 Older Children and Child Restraints Children who weigh more than 20 lbs (9 kg) and who are older than one year can ride forward-facing in the vehicle. Forward-facing child seats and convertible child seats used in the forward-facing direction are for children who weigh 20 to 40 lbs (9 to 18 kg) and who are older than one year. These child seats are also held in the vehicle by the lap/shoulder belt or the LATCH child restraint anchorage system.
84 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • If the shoulder belt contacts the face or neck, move the child closer to the center of the vehicle. If this doesn’t help, move the child to the center rear seating position and use the lap belt. Never allow a child to put the shoulder belt under an arm or behind their back. NOTE: For additional information, refer www.seatcheck.org or call 1-866-SEATCHECK. to WARNING! • Improper installation can lead to failure of an infant or child restraint.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Here are some tips on getting the most out of your child restraint: • Before buying any restraint system, make sure that it has a label certifying that it meets all applicable Safety Standards. We also recommend that you make sure that you can install the child restraint in the vehicle where you will use it, before you buy it. • The restraint must be appropriate for your child’s weight and height. Check the label on the restraint for weight and height limits.
86 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Buckle the child into the seat according to the child restraint manufacturer’s directions. • When your child restraint is not in use, secure it in the vehicle with the seat belt or remove it from the vehicle. Don’t leave it loose in the vehicle. In a sudden stop or collision, it could strike the occupants or seatbacks and cause serious personal injury.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 87 WARNING! An incorrectly anchored tether strap could lead to increased head motion and possible injury to the child. Use only the anchor positions directly behind the child seat to secure a child restraint top tether strap. Rear Seat Tether Strap Mounting When using the tether anchorages in the center position on third row fold-in-floor seating, ensure that the strap is routed underneath the top of the seatback and the head restraint.
88 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Because the lower anchorages are to be introduced to passenger carrying vehicles over a period of years, child restraint systems having attachments for those anchorages will continue to have features for installation in vehicles using the lap or lap/shoulder belt. They will also have tether straps, and you are urged to take advantage of all of the available attachments provided with your child restraint in any vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Not all child restraint systems will be installed as we have described here. Again, carefully follow the instructions that come with the child restraint system. WARNING! Improper installation of a child restraint to the LATCH anchorages can lead to failure of an infant or child restraint. The child could be badly injured or killed. Follow the manufacturer’s directions exactly when installing an infant or child restraint.
90 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! Rearward-facing infant restraints must never be secured in the passenger seat of a vehicle with a passenger airbag. In an accident a passenger airbag may deploy causing severe injury or death to infants riding in rearward-facing infant restraints. Commercial Child Restraint Tether Anchor This vehicle is equipped with a child restraint tether anchor located on the lower rear of the front passenger seat.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE VEHICLE EQUIPPED WITH THE REAR SEAT DELETE FEATURE (Commercial Vehicles Only). • The forward-facing child seat is for children from about 20 to 40 lbs (9 to 18 kg), and more than one year old.
92 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: Ensure that the child restraint tether strap is centered between the headrest supports underneath the head rest. 4. Using the hook attached to the child restraint tether strap, attach the child restraint tether strap to the metal anchor on the lower rear of the front passenger seat. 5. Following the child seat manufacturer’s instructions, tighten the child restraint tether strap. 6.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ENGINE BREAK-IN RECOMMENDATIONS A long break-in period is not required for the engine in your vehicle. Drive moderately during the first 300 mi (500 km). After the initial 60 mi (100 km), speeds up to 50 or 55 mph (80 or 90 km/h) are desirable. While cruising, brief full-throttle acceleration, within the limits of local traffic laws, contributes to a good break-in. Wide-open throttle acceleration in low gear can be detrimental and should be avoided.
94 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Airbag Light The light should come on and remain on for four seconds as a bulb check when the ignition switch is first turned ON. If the LED is not lit during starting and/or the light stays on or comes ON while driving, have the system checked by an authorized dealer. Defroster Check operation by selecting the defrost mode and place the blower control on high speed. You should be able to feel the air directed against the windshield.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Exhaust Gas WARNING! Exhaust gases can injure or kill. They contain carbon monoxide (CO) which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you. To avoid breathing (CO) follow the safety tips below. Do not run the engine in a closed garage or in confined areas any longer than needed to move your vehicle in or out of the area.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS m Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 ▫ Manual Rear View Day/Night Mirror — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . 100 3 ▫ Things You Should Know About Your UConnectt System . . . . . . . . . . . . . . . . . . . . 122 ▫ General Information . . . . . . . . . . . . . . . . . . . 131 ▫ Exterior Mirrors . . . . . . . . . . . . . . . . . . . . . . 102 m Seats . . . . . . . . . . . . . . . . . . . . .
98 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Setting Memory Positions And Linking RKE Transmitter To Memory . . . . . . . . . . . . . . . . . 156 m To Open And Close The Hood . . . . . . . . . . . . . 158 ▫ Hood Safety Switch — If Equipped . . . . . . . . 159 m Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160 ▫ Interior Lighting . . . . . . . . . . . . . . . . . . . . . . 160 ▫ Exterior Lights . . . . . . . . . . . . . . . . . . . . . . . 162 m Multifunction Lever . . . . . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 99 ▫ Power Inverter — If Equipped . . . . . . . . . . . . 196 ▫ Door Trim Panel Storage . . . . . . . . . . . . . . . . 209 ▫ Electrical Outlet Use With Engine Off . . . . . . . 198 ▫ Second Row Floor Storage Bins — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . 210 m Sun Screens— If Equipped . . . . . . . . . . . . . . . . 198 m Cup Holders And Convenience Tray Drawer . . . 200 ▫ Instrument Panel Cup Holders . . . . . . . . . . . .
100 UNDERSTANDING THE FEATURES OF YOUR VEHICLE MIRRORS Manual Rear View Day/Night Mirror — If Equipped Adjust the mirror to center on the view through the rear window. A two point pivot system allows for horizontal and vertical adjustment of the mirror. Manual Rearview Mirror Annoying headlight glare can be reduced by moving the small control under the mirror to the night position (toward rear of vehicle). The mirror should be adjusted while set in the day position (toward windshield).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 101 CAUTION! To avoid damage to the mirror during cleaning, never spray any cleaning solution directly onto the mirror. Apply the solution onto a clean cloth and wipe the mirror clean. Automatic Dimming Mirror Illuminated Vanity Mirrors — If Equipped An illuminated vanity mirror is on the sun visor. To use the mirror, rotate the sun visor down and swing the mirror cover upward. The lights turn on automatically. Closing the mirror cover turns off the lights.
102 UNDERSTANDING THE FEATURES OF YOUR VEHICLE EXTERIOR MIRRORS Side View Mirrors To receive maximum benefit, adjust the outside mirror(s) to center on the adjacent lane of traffic with a slight overlap of the view obtained on the inside mirror. WARNING! Vehicles and other objects seen in a outside convex mirrors will look smaller and farther away than they really are. Relying too much on side convex mirrors could cause you to collide with another vehicle or other object.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 103 mirrors. Press the switch to the Left or Right for mirror selection. Press the mirror select switch again to guard against accidentally moving a mirror position. The mirror selection will also automatically turn off after 30 seconds. 3 Power Folding Mirror Switch Both mirrors will always move together and will fold anytime the button is pressed. The ignition switch does not have to be in the ON position.
104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Select a mirror and press one of the four arrows for the direction you want the mirror to move. Driver’s power mirror preselected positions can be controlled by the optional Driver Memory Seat Feature. Refer to “Driver Memory Seat — If Equipped” in Section 3 of this manual. HANDS-FREE COMMUNICATION (UConnectT) — IF EQUIPPED NOTE: The sales code RER, REN and REU radios contain an integrated Hands-Free Communication (UConnectt) system.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE UConnectt allows you to transfer calls between the system and your cellular phone as you enter or exit your vehicle and enables you to mute the system’s microphone for private conversation. The UConnectt phonebook enables you to store up to 32 names, with four numbers per name. Each language has a separate 32-name phonebook accessible only in that language. This system is driven through your Bluetootht “Hands-Free profile” cellular phone.
106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The UConnectt system can be used with any Hands-Free Profile certified Bluetootht cellular phone. See the UConnectt website for supported phones. If your cellular phone supports a different profile (e.g., Headset Profile) you may not be able to use any UConnectt features. Refer to your cellular service provider or the phone manufacturer for details.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE example, you can use the combined form voice command 9Phonebook New Entry,9 or you can break the combined form command into two voice commands: 9Phonebook9 and 9New Entry.9 Please remember, the UConnectt system works best when you talk in a normal conversational tone, as if speaking to someone sitting a few feet/meters away from you. Voice Command Tree Refer to “Voice Tree” in this section.
108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • When prompted, after the beep, say 9Pair a Phone9 and follow the audible prompts. • You will be asked to say a four-digit Personal Identification Number (PIN), which you will later need to enter into your cellular phone. You can enter any four-digit PIN. You will not need to remember this PIN after the initial pairing process. • For identification purposes, you will be prompted to give the UConnectt system a name for your cellular phone.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE user from dialing an invalid combination of numbers. For example, in the U.S., 234-567-890 is nine digits long, which is not a valid U.S. phone number - the closest valid phone number has 10 digits. • The UConnectt system will confirm the phone number and then dial. The number will appear in the display of certain radios. Call by Saying a Name 109 you can say 9John Doe,9 where John Doe is a previously stored name entry in the UConnectt phonebook.
110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • When prompted, say the name of the new entry. Use of long names helps the voice recognition and it is recommended. For example, say 9Robert Smith9 or 9Robert9 instead of 9Bob.9 • When prompted, enter the number designation (e.g., 9Home,9 9Work,9 9Mobile,9 or 9Pager9). This will allow you to store multiple numbers for each phonebook entry, if desired. • When prompted, recite the phone number for the phonebook entry that you are adding.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 111 and you may see a message on the phone display that the Bluetootht link is busy. In this case, the user must first disconnect or drop the Bluetootht connection to the UConnectt system, and then send the address book entry via Bluetootht. Please see your phone Owner’s Manual for specific instructions on how to drop the Bluetootht connection. • You will then be asked for the name of the phonebook entry that you wish to edit.
112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Delete Entries in the UConnectt Phonebook NOTE: Editing phonebook entries is recommended when the vehicle is not in motion. • Press the PHONE button to begin. • After the 9Ready9 prompt and the following beep, say 9Phonebook Delete.9 • After you enter the Phonebook Delete menu, you will then be asked for the name of the entry that you wish to delete.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE List All Names in the UConnectt Phonebook • Press the PHONE button to begin. • After the 9Ready9 prompt and the following beep, say 9Phonebook List Names.9 • The UConnectt system will play the names of all the phonebook entries. • To call one of the names in the list, press the “Voice Recognition” button during the playing of the desired name, and say 9Call.9 NOTE: The user can also exercise 9Edit9 or 9Delete9 operations at this point.
114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Answer or Reject an Incoming Call - Call Currently in Progress If a call is currently in progress and you have another incoming call, you will hear the same network tones for call waiting that you normally hear when using your cell phone. Press the PHONE button to place the current call on hold and answer the incoming call.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Three-Way Calling To initiate three-way calling, press the “Voice Recognition” button while a call is in progress, and make a second phone call, as described under 9Making a Second Call While Current Call in Progress.9 After the second call has established, press and hold the PHONE button until you hear a double beep, indicating that the two calls have been joined into one conference call.
116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • After the ignition key is switched to OFF, a call can continue on the UConnectt system for a certain duration, after which the call is automatically transferred from the UConnectt system to the mobile phone. • An active call is automatically transferred to the mobile phone after the ignition key is switched to OFF. UConnectT System Features Language Selection To change the language that the UConnectt system is using: • Press the PHONE button to begin.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE • After the 9Ready9 prompt and the following beep, say 9Emergency9 and the UConnectt system will instruct the paired cellular phone to call the emergency number. This feature is supported in the U.S., Canada, and Mexico. NOTE: The emergency number dialed is based on the country where the vehicle is purchased (911 for the U.S. and Canada and 060 for Mexico). The number dialed may not be applicable with the available cellular service and area.
118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE certain companies, which time out a little too soon to work properly with the UConnectt system. Voice Mail Calling To learn how to access your voice mail, refer to 9Working with Automated Systems.9 Working with Automated Systems This method is used in instances where one generally has to press numbers on the cellular phone keypad while navigating through an automated telephone system.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: • You may not hear all of the tones due to cellular phone network configurations; this is normal. • Some paging and voice mail systems have system time out settings that are too short and may not allow the use of this feature. Barge In - Overriding Prompts The “Voice Recognition” button can be used when you wish to skip part of a prompt and issue your voice recognition command immediately.
120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE dialing a number with your paired Bluetootht cellular phone, the audio will be played through your vehicle’s audio system. The UConnectt system will work the same as if you dial the number using voice recognition. NOTE: Certain brands of mobile phones do not send the dial ring to the UConnectt system to play it on the vehicle audio system, so you will not hear it.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Connect or Disconnect Link Between the UConnectt System and Cellular Phone Your cellular phone can be paired with many different electronic devices, but can only be actively 9connected9 with one electronic device at a time. If you would like to connect or disconnect the Bluetootht connection between a UConnectt paired cellular phone and the UConnectt system, follow the instructions described in your cellular phone User’s Manual.
122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The selected phone will be used for the next phone call. If the selected phone is not available, the UConnectt system will return to using the highest priority phone present in or near (approximately within 30 ft [9 m]) the vehicle. Delete UConnectt Paired Cellular Phones • Press the PHONE button to begin. • After the 9Ready9 prompt and the following beep, say 9Setup Phone Pairing.9 • At the next prompt, say 9Delete9 and follow the prompts.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123 Repeat the words and phrases when prompted by the UConnectt system. For best results, the Voice Training session should be completed when the vehicle is parked with the engine running, all windows closed, and the blower fan switched OFF. • Speak normally, without pausing, just as you would speak to a person sitting a few feet/meters away from you. This procedure may be repeated with a new user. The system will adapt to the last trained voice only.
124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • When navigating through an automated system such as voice mail, or when sending a page, at the end of speaking the digit string, make sure to say 9Send.9 • Storing names in the phonebook when the vehicle is not in motion is recommended. • It is not recommended to store similar sounding names in the UConnectt phonebook. • The UConnectt phonebook nametag recognition rate is optimized for the person who stored the name in the phonebook.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Echo at the far end can sometimes be reduced by lowering the in-vehicle audio volume. • In a convertible vehicle, system performance may be compromised with the convertible top down. Bluetootht Communication Link Cellular phones have been found to lose connection to the UConnectt system. When this happens, the connection can generally be re-established by switching the phone off/on. Your cell phone is recommended to remain in Bluetootht ON mode.
126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 127 3
128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Primary zero one two three four five six seven eight nine star (*) plus (+) pound (#) add location all Voice Commands Alternate(s) Voice Commands Primary Alternate(s) call cancel confirmation prompts continue delete dial download edit emergency English erase all Espanol Francais help home 129 3
130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Primary language list names list phones mobile mute mute off new entry no pager pair a phone phone pairing phonebook previous record again redial Voice Commands Alternate(s) pairing phone book Voice Commands Primary Alternate(s) return to main menu return or main menu select phone select send set up phone settings or phone set up towing assistance transfer call UConnectt Tutorial try again voice training work yes
UNDERSTANDING THE FEATURES OF YOUR VEHICLE General Information This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference received, including interference that may cause undesired operation. 131 SEATS Seats are a primary part of the Occupant Restraint (protection) System of the vehicle.
132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Manual Front And Second Row Seat Adjuster The adjusting bar is located under the front of the seat. Pull the bar up and move the seat to the desired position. Release the bar to lock the seat into position. Using body pressure, move forward and rearward on the seat to be sure the seat adjusters have latched. WARNING! Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 8–Way Driver’s Power Seat — If Equipped The driver’s power seat switches are located on the outboard side of the seat. The front switch controls up/down, forward/rearward, and tilt adjustment. The rear switch controls the seatback recline adjustment. Driver Power Seat Switch 1 - Bottom Control 2 - Seatback Control 133 CAUTION! DO NOT place any article under a power seat or impede its ability to move as it may cause damage to the seat controls.
134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Adjustable Head Restraints Head restraints can reduce the risk of whiplash injury in the event of impact from the rear. Pull up or push down on the head restraint cushion so that the upper edge is as high as practical. To raise the head restraint, pull up on the head restraint. To lower the head restraint, depress the release tab located at the base of the head restraint and push down on the head restraint.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 135 Heated Seats — If Equipped This feature heats the front driver and passenger seats. The controls for front heated seats are located on the center instrument panel area. The switch indicator lights will show when the HIGH or LOW heat is ON. Press the switch once to choose HIGH (two lights), press it a second time to choose LOW (one light), press it a third time for No Heat (no lights).
136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaustion or other physical condition must exercise care when using the seat heater. It may cause burns even at low temperatures, especially if used for long periods of time. DO NOT place anything on the seat that insulates against heat, such as a blanket or cushion.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 WARNING! DO NOT ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt and be seriously or fatally injured. Use the recliner only when the vehicle is parked. Manual Lumbar Adjust Lever — If Equipped The lumbar adjustment handle is located on the outboard side of the seat. To increase the support, rotate the handle down.
138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Stow ’n Go Seating — If Equipped On vehicles equipped with Stow ’n Go seating, the second and third row seats may be folded into the floor for convenient storage. To Fold Second Row Seats 1. Move the front seat fully forward. 2. Lower the head restraints and raise the armrests on the second row seat. 3. Slide the storage bin locking mechanism to the 9unlocked9 position and then pull up on the storage bin latch to open the cover.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139 4. Pull up on the seatback recliner lever located on the outboard side of the seat and fold the seatback down. To assure the seatback is latched in the folded position, additional downward pressure on the seatback may be required when folding.
140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 5. Pull rearward on the release strap located at the rear of the seat and tumble the seat forward into the storage bin. CAUTION! The storage bin cover must be locked and flat to avoid damage from contact with the front seat tracks, which have minimal clearance to the cover. WARNING! In an accident, serious injury could result if the seat storage bin covers are not properly latched. • DO NOT drive the vehicle with the storage bin covers open.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141 To Unfold Second Row Seats 1. Slide the storage bin locking mechanism to the 9unlocked9 position and then pull up on the storage bin latch to open the cover. 3 2. Pull up on the handle to lift the seat out of the storage bin and push the seat rearward to latch the seat anchors.
142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Pull up on the seatback recliner lever located on the outboard side of the seat, to return the seatback to its full upright position. Second Row Bench Seat — If Equipped While the bench seat does not stow in the floor, it is removable for added cargo space. Rollers integrated into the seat frame ease removal through the rear. Floor storage compartments are still available with the bench seat.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE The power recline feature, located on the side of the seat cushion, adjusts the seatback angle forward/rearward for occupant comfort 143 Remote Third Row Power Seat Switch— If Equipped A One-Touch Third Row Power Folding Seat switch is located in the left rear trim panel as part of a switch-bank.
144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The rear switch bank allows multiple power folding and unfolding positions for the third row seats. Left and right third row seats can be folded individually or together.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 145 NOTE: The Third Row Power Seat system includes obstacle detection for safe operation. When the system detects an obstacle, the motors will stop and reverse the motion for a brief period. Should this occur, remove the obstacle and repress the button again, for the desired position. 3 To Fold Third Row Seats Manually — If Equipped 1. Lower the head restraint to its full down position. 2.
146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Unfold Third Row Seats Tailgate Mode 1. Pull up on the assist strap to lift the seat out of the storage bin and push the seat forward until the anchors latch. 1. Pull release strap “2”, then pull release strap “3” to rotate the entire seat rearward. 2. Pull release strap marked “1” to unlock the recliner. 3. Pulling strap “3” releases the seatback to return to its full upright position. 4. Adjust the head restraint to the desired position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 147 WARNING! To avoid serious injury or death, NEVER operate the vehicle with occupants in the third row seat while in the tailgate mode. 3 Easy Access Seating The second row Stow ’n Go seats can be tilted forward for easy access to the third row seat or rear cargo area. To tilt the seat, pull forward on the release strap located on the front of the seat between the seatback and seat cushion and tilt the seat fully forward.
148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Swivel ’n Go Premium Seating — If Equipped Premium second row Swivel ’n Go Seating features include: • A table that installs between the second and third row seats.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE To swivel the seat: Pull the lower handle on the outboard side of the seat and push the side of the seatback to begin rotation. Once the seat begins to rotate, the handle may be released. The seat locks in position once reaching the forward or rearward positions only. Seatbacks fold forward on an angle, not flat. This allows the seats to swivel when the seatbacks are folded.
150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Removing Swivel ’n Go Premium Seating — If Equipped 1. Remove any obstructions from the floor behind the seat, and stow the Third Row Seat. 2. Pull up on the release bar located at the bottom front edge of the swivel seat. 3. From behind the seat, lift up on the rear of the seat cushion while pulling the seat in a rearward direction. 4. Remove the seat from vehicle through the liftgate. Rollers are part of the seat frame and will ease the removal process. 5.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Swivel ’n Go Premium Seating Table — If Equipped The Swivel ’n Go Seating Table consists of an easily assembled post and top. 151 The table and leg are stored beneath the floor when not in use. To install the table follow these steps: 3 Second Row Seating and Table 1. Swivel the second row seats so they are facing the rear.
152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Open the floor storage cover in front of the second row seats. 4. Insert pole into base by aligning the lock button into notch of the base. Table and Leg Storage 3. Remove the pole and table top by loosening the hook and loop straps.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 5. Twist the pole in a clockwise rotation until it stops. Note: You will hear an audible “click” when the lock button engages the base. 6. Place the table top over the installed pole aligning with the mating feature of the underside of the table top. Apply pressure on the table top and press downward. Note: You will hear an audible “click” when the table latch engages the pole.
154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To separate the table top from the pole, follow these steps: 3. While pulling on the latch, pull upward to remove the table top from the pole. 1. Locate the release latch on the underside of the table top. NOTE: The table top should be removed from the leg prior to removing the leg from its mounting base. 4. Locate the release button on the pole. Press the release button firmly to activate the release from the base. 5.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 155 Plastic Grocery Bag Retainer Hooks Retainer hooks which will hold plastic grocery bag handles are built into the seatbacks of all rear seats and some front seats. The floor supports the partial weight of the bagged goods.
156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Setting Memory Positions And Linking RKE Transmitter To Memory 5. Turn on the radio and set the radio station presets (up to 10 AM and 10 FM stations can be set). NOTE: Each time the SET(S) button and a numbered button (1 or 2) are pressed, you erase the memory settings for that button and store a new one. 6. Turn the ignition switch to the OFF position and remove the key. 1. Insert the ignition key and turn the ignition switch to the ON position. 7.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 10. Insert the ignition key and turn the ignition switch to the ON position. 11. Select 9Remote Linked to Memory9 in the Electronic Vehicle Information Center (EVIC) and enter 9Yes9 or select 9No9 from the EVIC and enter 9Yes9. Refer to the Customer Programmable features in the Electronic Vehicle Information Center (EVIC) section for more information. 12.
158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Press and release Memory Button 1. The system will recall any memory settings stored in position 1. Wait for the system to complete the memory recall before continuing to step 3. 3. Press and release the memory SET(S) button located on the driver’s door. A chime will sound signaling that you are in the memory set mode. 4. Within five seconds, press and release Memory Button 1 on the driver’s door.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 159 inches (30 cm) and then drop it. This should secure both latches. Never drive your vehicle unless the hood is fully closed, with both latches engaged. WARNING! If the hood is not fully latched, it could fly up when the vehicle is moving and block your forward vision. You could have a collision. Be sure all hood latches are fully latched before driving. Hood Safety Catch Use the hood prop rod to secure the hood in the open position.
160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If the vehicle is equipped with the Compass Mini-Trip Computer (CMTC) and the hood is not latched, a “hood” will be displayed in the PRNDL/Odometer window of the instrument cluster. LIGHTS All of the lights, except the hazard warning lights, headlamp high beams and flash to pass, are controlled by switches to the left of the steering column on the instrument panel.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE The interior lights will automatically turn off in about 10 minutes for the first activation and 90 seconds every activation thereafter until the engine is started, if one of the following occur: • A door, sliding door or the liftgate is left open • Any overhead reading light is left on • If the dimmer control is in the extreme top position NOTE: The key must be out of the ignition switch or the ignition switch must be in the OFF position for this feature to opera
162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Parade Mode (Daytime Brightness Feature) Rotate the dimmer control to the first detent. This feature brightens the odometer, radio and overhead displays when the park lights or headlights are on. Dimmer Control With the park lights or headlights on, rotating the dimmer control for the interior lights on the instrument panel upward will increase the brightness of the instrument panel lights.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Daytime Running Lights (Canada/Fleet Vehicles Only) The headlights on your vehicle will illuminate when the engine is started and the transmission is in any gear except PARK. This provides a constant lights on condition until the ignition is turned OFF. The lights illuminate at less than 50% of normal intensity. If the parking brake is applied the Daytime Running Lights (DRL) will turn off.
164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE headlights are in the automatic mode, and the engine is running, the headlights will automatically turn on when the wiper system is on. Headlight Delay — If Equipped This feature provides the safety of headlight illumination for up to 90 seconds after exiting your vehicle. Automatic Headlights NOTE: The engine must be running before the headlights will come on in the Automatic mode.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 165 If the headlights are turned off before the ignition, they will turn off in the normal manner. NOTE: The headlights must be turned off within 45 seconds of turning the ignition OFF to activate this feature. 3 Front Fog Lights — If Equipped To activate the front fog lights, turn on the park lights or the low beam headlights and push in the headlight switch control knob.
166 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Battery Protection This feature provides battery protection to avoid wearing down the battery if the headlights, park lights, or front fog lights are left on for extended periods of time when the ignition switch is in the LOCK position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 167 If either indicator flashes at a rapid rate, check for a defective outside turn signal light bulb. If one of the indicators fails to light when the lever is moved, it would suggest that the indicator light is defective. Turn Signal Auto-Mode Tap the multifunction control lever once and the turn signal (left or right) will flash three times, and automatically turn off. You may manually signal a lane change by moving the lever partially up or down.
168 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Windshield Wiper and Washer Functions The wipers and washers are operated by a switch within the multifunction lever. Rotate the end of the lever to select the desired wiper speed. NOTE: Always remove any buildup of snow that prevents the windshield wiper blades from returning to the off position. If the windshield wiper switch is turned off and the blades cannot return to the off position, damage to the wiper motor may occur.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 1. Multifunction Lever — Mist, Front Wiper and Washer Press the end of the multifunction lever inward to the first detent and release to clear the windshield. Pressing the multifunction lever inward to the second detent will cause the washers to spray for a maximum of 10 seconds, or until the lever is released, and the wipers will cycle three times.
170 UNDERSTANDING THE FEATURES OF YOUR VEHICLE the rotary ring fully forward and the washers will spray until the ring is released, and then resume the intermittent interval. NOTE: Rear window wipers function in the intermittent wiper speed only. 4. Headlight Low/High Beam Select Switch and Flash-to-Pass Headlight Low/High Beam Select Switch When the headlights are turned on, pushing the lever assembly toward the instrument panel will switch from low beams to high beams.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 171 TILT STEERING COLUMN — IF EQUIPPED To tilt the column, pull the small lever downward (located on the steering column and below the steering wheel) to the open position. You may then position the steering wheel up or down, as desired. Pull the small lever upward to the closed position to lock the steering wheel firmly in place. 3 WARNING! Tilting the steering column while the vehicle is moving is dangerous.
172 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The Rear Park Assist System will remember the last system state (enabled or disabled) from the last ignition cycle when the ignition is changed to the RUN/ON position. The Rear Park Assist System can be active only when the transaxle gear selector lever is in REVERSE. When in REVERSE, the system scans for objects behind the vehicle using four sensors located in the rear bumper.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 173 When the ignition switch is turned to the RUN/ON position, the warning display will turn on all of its LEDs for about one second. Each side of the warning display has six yellow and two red LED lights, one set to warn of obstacles behind the left rear of the vehicle and the other set to warn of obstacles behind the right rear of the vehicle. The vehicle is close to the obstacle when the red LED is illuminated.
174 UNDERSTANDING THE FEATURES OF YOUR VEHICLE DISPLAY LED 1st LED 2nd LED 3rd LED 4th LED 5th LED 6th LED 7th LED PARK ASSIST WARNING DISPLAY DISTANCES OBSTACLE DISTANCE FROM: REAR CENTER REAR CORNERS REAR CENTER 78.7 in (200 cm) Yellow 51.1 in (130 cm) Yellow 45.2 in (115 cm) Yellow 31.5 in (80 cm) 39.3 in (100 cm) Yellow 25.5 in (65 cm) 33.5 in (85 cm) Yellow 20 in (50 cm) 27.6 in (70 cm) Yellow 16 in (40 cm) 19.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 175 WARNING! CAUTION! Drivers must be careful when backing up even when using the Rear Park Assist System. Always check carefully behind your vehicle, and be sure to check for pedestrians, animals, other vehicles, obstructions, or blind spots before backing up. You are responsible for the safety of your surroundings and must continue to pay attention while backing up. Failure to do so can result in serious injury or death.
176 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: • Ensure that the rear bumper is free of dirt and debris to keep the system operating properly. (Customer Programmable Features)” under “Electronic Vehicle Information Center (EVIC)” in Section 4 of this manual. • Jackhammers, large trucks, and other vibrations could affect the performance of the system.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE If (SERVICE PARK ASSIST SYSTEM( appears in the Electronic Vehicle Information Center (EVIC), after making sure the rear bumper is clean, please see your authorized dealer. Should this wrench symbol display with the letter P next to it, your Park Sense System needs servicing. Contact your authorized dealer.
178 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Press the button forward to move the pedals forward (toward the front of the vehicle). Press the button rearward to move the pedals rearward (toward the driver). • The pedals can be adjusted with the ignition OFF. • The pedals can be adjusted while driving. • The pedals cannot be adjusted when the vehicle is in REVERSE or when the Electronic Speed Control System is ON.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE ELECTRONIC SPEED CONTROL — IF EQUIPPED When engaged, this device takes over the accelerator operation at speeds greater than 25 mph (40 km/h). 179 Activating Electronic Speed Control Push the ON/OFF button (located in the end of the lever) once and the CRUISE indicator light (located in the message window of the odometer) will illuminate showing the electronic speed control system is on.
180 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Setting Electronic Speed Control at a Desired Speed When the vehicle has reached the desired speed, press the SET lever downward and then release. Lift your foot off the accelerator and the vehicle will operate at the selected speed. Deactivating Electronic Speed Control A soft tap on the brake pedal or pulling the lever CANCEL toward you, will deactivate the speed control without erasing the set speed memory.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The Electronic Speed Control system has been designed to shut down if multiple speed control switch functions are operated simultaneously in order to ensure proper operation. If this occurs, the system can be reactivated by pushing the speed control switch ON/ OFF button and resetting the desired vehicle SET speed. Accelerating To Pass Depress the accelerator as you would normally. When the pedal is released, the vehicle will return to the set speed.
182 UNDERSTANDING THE FEATURES OF YOUR VEHICLE OVERHEAD CONSOLES Front Overhead Console — If Equipped Two versions of the overhead console are available. The base front overhead console models feature fixed incandescent courtesy/reading lights, flip-down sunglass storage and conversation mirror.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Courtesy/Interior Lighting At the forward end of the console are two courtesy lights (standard dome light has two buttons). The lights turn on when a front door, a sliding door or the liftgate is opened. If your vehicle is equipped with Remote Keyless Entry, the lights will also turn on when the unlock button on the transmitter is pressed. The courtesy lights also function as reading lights. Press in on each lens to turn these lights on while inside the vehicle.
184 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rear Overhead Consoles — If Equipped The rear overhead storage system is available in two versions: with or without sunroof. An additional LED at the front of the rear console shines down on the second row footwell area while in courtesy mode, for added convenience. Overhead Compartment Features 1 2 3 4 1 1 — DVD — Rear HVAC — Interior Lights — Storage If equipped, otherwise storage.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rear Courtesy/Reading Lights — If Equipped The overhead console had two sets of courtesy lights. The lights turn on when a front door, a sliding door or the liftgate is opened. If your vehicle is equipped with Remote Keyless Entry, the lights will also turn on when the unlock button on the transmitter is pressed. The courtesy lights also function as reading lights. Press in on each lens to turn these lights on while inside the vehicle.
186 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The HomeLinkt buttons that are located in the headliner or sun visor designate the three different HomeLinkt channels. HomeLinkt Buttons NOTE: HomeLinkt is disabled when the Vehicle Security Alarm is active. WARNING! Your motorized door or gate will open and close while you are training the Universal Transceiver. Do not train the transceiver if people or pets are in the path of the door or gate.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Vehicle exhaust contains carbon monoxide, a dangerous gas. Do not run your vehicle in the garage while training the transceiver. Exhaust gas can cause serious injury or death. PROGRAMMING HOMELINKT Before You Begin If you have not trained any of the HomeLinkt buttons, erase all channels before you begin training. To do this, press and hold the two outside buttons for 20 seconds until the red indicator flashes.
188 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Watch for the HomeLinkt indicator to change flash rates. When it changes, it is programmed. It may take up to 30 seconds, or longer in rare cases. The garage door may open and close while you train. NOTE: Some gate operators and garage door openers may require you to replace Step 3 with procedures noted in the “Gate Operator/Canadian Programming” section.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 189 NOTE: There are 30 seconds in which to initiate the next step after the “Learn” button has been pressed. 7. Return to the vehicle and press the programmed HomeLinkt button twice (holding the button for two seconds each time). If the device is plugged in and activates, programming is complete. If the device does not activate, press the button a third time (for two seconds) to complete the training.
190 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Using HomeLinkt To operate, simply press and release the programmed HomeLinkt button. Activation will now occur for the trained device (i.e., garage door opener, gate operator, security system, entry door lock, home/office lighting, etc. The hand-held transmitter of the device may also be used at any time.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 191 has successfully accepted the frequency signal. The indicator light will flash slowly and then rapidly when fully trained. TROUBLESHOOTING TIPS If you are having trouble programming HomeLinkt, here are some of the most common solutions: If you unplugged the device for training, plug it back in at this time. • Replace the battery in the original transmitter. Then proceed with Step 4 under “Programming HomeLinkt,” earlier in this section.
192 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. This device must accept any interference that may be received including interference that may cause undesired operation. NOTE: The transmitter has been tested and it complies with FCC and IC rules. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the device.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Closing the Sunroof Manually To close the sunroof from an open or vent position, press and hold the switch forward. The sunroof will close fully and stop automatically. Release the switch to stop sunroof travel at any point. Sunroof Sunshade Operation The sunroof sunshade can be opened manually. However, the sunshade will open automatically as the sunroof opens. NOTE: The sunshade cannot be closed if the sunroof is open.
194 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Express-Vent Press and release the 9V9 button, and the sunroof will automatically open to the vent position. This is called Express-Vent. Ignition OFF Operation The power sunroof switch will remain active for 10 minutes after the ignition switch is turned OFF. Opening either front door will cancel this feature. Express-Close Press the switch forward and release, and the sunroof will close automatically from any position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 195 open or partially open positions. This is a normal occurrence and can be minimized. If the buffeting occurs with the rear windows open, open the front and rear windows together to minimize the buffeting. If the buffeting occurs with the sunroof open, adjust the sunroof opening to minimize the buffeting or open any window. 3 Sunroof Maintenance Use only a non-abrasive cleaner and a soft cloth to clean the glass panel.
196 UNDERSTANDING THE FEATURES OF YOUR VEHICLE when the overload is removed. The circuit breaker also supplies power to the outlet in the removable floor console, when in the front position. Refer to section 3 “Removable Floor Console” in this manual. A third outlet is located on the driver’s side, just to the rear of the sliding door and is also controlled by the ignition switch. The lower and rear outlets will not accommodate a conventional cigar lighter unit.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 197 • Due to built-in overload protection the inverter will shut down if the power rating is exceeded. WARNING! To Avoid Serious Injury or Death: • Do not use a Three–Prong Adaptor. • Do not insert any objects into the receptacles. • Do not touch with wet hands. • Close the lid when not in use.
198 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ELECTRICAL OUTLET USE WITH ENGINE OFF CAUTION! • Many accessories that can be plugged in draw power from the vehicle’s battery, even when not in use (i.e., cellular phones, etc.). Eventually, if plugged in long enough, the vehicle’s battery will discharge sufficiently to degrade battery life and/or prevent engine starting. SUN SCREENS— IF EQUIPPED Sun Screens are available for second and third row seating windows.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 199 Gently pull up on the tab to raise the sun screen. Continue pulling the sun screen until the tab is near the top of the window. 3 Sun Screen Extended Sun Screen Attaching To Retainer Clips Once the screen is completely to the top of the window, extend the top bar of the sun screen over the two hooks attached to the top of the window. To lower the sun screen, gently lift the tab upwards to disengage the hooks and feed the screen back into the base sill.
200 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CUP HOLDERS AND CONVENIENCE TRAY DRAWER There are nine cup holders in the interior. Two cup holders in the center front instrument panel, four in the floor consoles and three more are located in the third row quarter trim panel. All liners are removable for cleaning. Pull the flexible liner from the cup holder drawer or tray; starting at one edge to ease removal. Refer to “Cleaning The Instrument Panel Cup Holders” in Section 7.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Interior Bottle Holders There are four bottle holders located in the interior. One bottle holder is molded into each front interior door trim panels, and one bottle holder is molded into each side sliding interior door trim panel. Each holder accommodates up to 20 oz. (.6 L) size plastic bottles. Two outboard mesh pockets on intermediate seating. The mesh pockets are flexible enough to hold juice boxes, toys, games or MP3 players, etc.
202 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The cup holder/tray top is removable to access a large storage bin. • The Basic Console is removable from the vehicle for additional floor space by removing the cap at the console base. Basic Console Features 1 - Console Anchor 2 - Top Tray 3 - Front Cup holders 4 - Rear Cup holders To Remove The Basic Floor Console • Remove the front anchor cup plug and clip.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Slide the console base forward while lifting slightly to clear the rear load floor hook. • Remove the console. To Reinstall The Basic Floor Console • Position the console at a slight angle (front slightly higher than the rear. • Slide the console rearward into the floor bracket/ hook. • Align the console until the front anchor cup plug hole is centered on the winch hole.
204 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Top Tray Storage • Upper Storage Bin can hold nine regular or 18 thin CD’s or other items • Large Console Center Storage will store headphones for the available rear DVD entertainment system or other items • 12–Volt DC Power Outlet provides continuous power inside the console for cell phones or other electronics. • Rear Occupant Accessible • Multiple Adjustments • Removable from vehicle for additional floor space.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE The top and center console sections slide forward and rearward to provide added user comfort. Four cup holders, each of which can accommodate large sized beverage containers. A one-piece cup holder insert for both cavities can easily be removed for cleaning. The cup holders will also accommodate large size cups and 20 oz (.6 L) bottles. 205 3 Position 1 shows the console closed with four cup holders and a convenient storage tray.
206 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Position 2 shows the raised storage tray revealing a large storage area below. easy access to the storage area below and provides two of the four cup holders for the second row passengers. Console Position 2 Console Position 3 Dual Storage Bins Position 3 shows the top portion of the console in a rearward position. This is accomplished by lifting the upper most latch at the front of the console.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 207 • Pull rearward to disengage from floor and remove console To reinstall the console: • Position the console at a slight angle (rear slightly higher than the front • Slide the console forward into the floor bracket • Rotate the rear of the console down until it is resting on the floor bracket Console Position 4 To Remove The Premium Floor Console • Pull up on the bottom release handle in the front of the console • Lift the rear of the console up several inch
208 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! In an accident, serious injury could result if the removable floor console is not properly installed. Always be sure the removable floor console is fully latched. STORAGE Glove Compartments There are both upper and lower glove compartments. Upper Glove Compartment To open the upper compartment (4), press inward on the release button (3). The door will spring open about one in (2.54 cm).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 209 Lower Glove Compartment To open the lower compartment (1) pull out on the release handle (2). The lower compartment handle is also equipped with a lock. Door Trim Panel Storage 3 Front Door Storage Both interior front door panels have multiple pockets for storage.
210 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Sliding Side Door Bottle Holder Both sliding doors have a bottle holder molded right into the trim. Second Row Floor Storage Bins — If Equipped The Second Row Seat Storage Bins are located on the floor in front of the second row seats. The area below the floor covers can be used for storage when the second row seat is in the upright position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Pull up on the storage bin latch to open the cover. Slide the storage bin locking mechanism to the 9unlocked9 position to allow greater access to the storage bin. CAUTION! The storage bin cover must lay flat and be locked to avoid damage from contact with the front seat tracks, which have minimal clearance to the cover. 211 WARNING! In an accident, serious injury could result if the seat storage bin covers are not properly latched.
212 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To remove the console use the following procedure: 1. Open the console lid and remove the storage tray. 2. Pull up on the release handle located inside the floor console, and slide the console rearward to disengage from the floor. 3. Remove the floor console. To reinstall the console use the following procedure: 1. Open the console lid and remove the storage tray. 2.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 213 WARNING! In an accident, serious injury could result if the removable floor console is not properly installed. Always be sure the removable floor console is fully latched. 3 Rear Compartment Storage Your vehicle is equipped with open storage areas located in each rear trim panel.
214 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Coat Hooks Coat hooks are located along the headliner for the second and third row seating positions. The coat hook load limit is 10 lbs (4.5 kg). Exceeding the recommended load limit can cause the coat hooks to break or disengage from the vehicle. The liftgate sill plate has a raised line with the statement “Load To This Line”. This line indicates how far rearward cargo can be placed without interfering with liftgate closing.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE ROOF LUGGAGE RACK — IF EQUIPPED The crossbars and siderails are designed to carry the weight on vehicles equipped with a luggage rack. The load must not exceed 150 lbs (68 kg), and should be uniformly distributed over the luggage rack crossbars. Distribute cargo weight evenly on the roof rack crossbars. The roof rack does not increase the total load carrying capacity of the vehicle.
216 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! CAUTION! • Crossbars should remain equally spaced or parallel at any luggage rack position for proper function. Noncompliance could result in damage to the luggage rack, cargo and/or vehicle. • Long loads which extend over the windshield, such as wood panels or surfboards, or loads with large frontal area should be secured to both the front and rear of the vehicle.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 217 WARNING! Cargo must be securely tied before driving your vehicle. Improperly secured loads can fly off the vehicle, particularly at high speeds, resulting in personal injury or property damage. Follow the Roof Rack Cautions when carrying cargo on your roof rack. UMBRELLA HOLDER An umbrella holder has been conveniently molded into the left front door entry scuff molding.
218 UNDERSTANDING THE FEATURES OF YOUR VEHICLE LOAD-LEVELING SYSTEM — IF EQUIPPED The automatic load-leveling system will provide a level riding vehicle under most passenger and cargo loading conditions. A hydraulic pump contained within the shock absorbers raises the rear of the vehicle to the correct height. It takes approximately 1 mile (1.6 km) of driving for the leveling to complete depending on road surface conditions.
UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS m Instrument Panels And Controls . . . . . . . . . . . . 223 ▫ Compass/Temperature Display . . . . . . . . . . . 240 m Base Instrument Cluster . . . . . . . . . . . . . . . . . . 224 m Electronic Vehicle Information Center (EVIC) — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . . 241 m Premium Instrument Cluster . . . . . . . . . . . . . . . 225 m Instrument Cluster Descriptions . . . . . . . . . . . .
220 UNDERSTANDING YOUR INSTRUMENT PANEL m Sales Code REQ — AM/FM Stereo Radio And 6–Disc CD/DVD Changer (MP3/WMA AUX Jack) . . . . . . . . . . . . . . . . . . 252 ▫ Operating Instructions - Radio Mode . . . . . . . 252 ▫ Operation Instructions - (Disc Mode For CD And MP3/WMA Audio Play, DVD-Video) . . . . 260 ▫ Notes On Playing MP3/WMA Files . . . . . . . . 262 ▫ List Button (Disc Mode For MP3/WMA Play) . . . . . . . . . . 265 ▫ Info Button (Disc Mode For MP3/WMA Play) . . . . . . . . . .
UNDERSTANDING YOUR INSTRUMENT PANEL m Sales Code RER — Multimedia System — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . . 283 221 ▫ Operating Instructions - Satellite Mode . . . . . . 289 ▫ Operating Instructions — Satellite Radio . . . . . 284 ▫ Operating Instructions - Hands-Free Phone (If Equipped) . . . . . . . . . . . . . . . . . . . . . . . . 292 ▫ Operating Instructions — Hands-Free Communication (UConnectt) (If Equipped) . . .
222 UNDERSTANDING YOUR INSTRUMENT PANEL m Radio Operation And Cellular Phones . . . . . . . . 299 ▫ Summer Operation . . . . . . . . . . . . . . . . . . . . 318 m Remote Sound System Controls — If Equipped . . 299 ▫ Winter Operation . . . . . . . . . . . . . . . . . . . . . 318 ▫ Radio Operation . . . . . . . . . . . . . . . . . . . . . . 299 ▫ Vacation/Storage . . . . . . . . . . . . . . . . . . . . . 318 ▫ CD Player . . . . . . . . . . . . . . . . . . . . . . . . . . 300 ▫ Window Fogging . . . .
UNDERSTANDING YOUR INSTRUMENT PANEL 223 INSTRUMENT PANELS AND CONTROLS 4 1 2 3 4 5 - Air Vents - Instrument Cluster - Gear Selector Lever - Radio - Storage Bin 6 - Upper Glove Compartment 7 - Lower Glove Compartment 8 - Climate Controls 9 - Storage or DVD 10 - Cup Holders 11 - Storage Bin 12 - Power Supply 12V 13 - Hazard Switch 14 - Ignition Switch 15 - Dimmer Switch 16 - Head Light Switch 17 - Power Inverter Switch
224 UNDERSTANDING YOUR INSTRUMENT PANEL BASE INSTRUMENT CLUSTER
UNDERSTANDING YOUR INSTRUMENT PANEL 225 PREMIUM INSTRUMENT CLUSTER 4
226 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER DESCRIPTIONS 1. Fuel Gauge The pointer shows the level of fuel in the fuel tank when the ignition switch is in the ON position. 2. Fuel Door Reminder The arrow in this symbol is a reminder that the Fuel Filler Door is located on the left side of the vehicle. 3. Temperature Gauge The temperature gauge shows engine coolant temperature. Any reading within the normal range indicates that the engine cooling system is operating satisfactorily.
UNDERSTANDING YOUR INSTRUMENT PANEL WARNING! A hot engine cooling system is dangerous. You or others could be badly burned by steam or boiling coolant. You may want to call an authorized dealer if your vehicle overheats. If you decide to look under the hood yourself, see Section 7 of this manual. Follow the warnings under the Cooling System Pressure Cap paragraph. 4. Speedometer Indicates vehicle speed. 5.
228 UNDERSTANDING YOUR INSTRUMENT PANEL If the ABS light is on, the brake system should be serviced as soon as possible to restore the benefits of Anti-Lock brakes. If the ABS light does not turn on when the Ignition switch is turned to the ON position, have the light inspected by an authorized dealer. 8. Brake System Warning Light This light monitors various brake functions, including brake fluid level and parking brake application.
UNDERSTANDING YOUR INSTRUMENT PANEL Brake Warning Light will turn on along with the ABS Light. Immediate repair to the ABS system is required. The operation of the Brake Warning Light can be checked by turning the ignition switch from the OFF position to the ON position. The light should illuminate for approximately two seconds. The light should then turn off unless the parking brake is applied or a brake fault is detected. If the light does not illuminate, have the light inspected by an authorized dealer.
230 UNDERSTANDING YOUR INSTRUMENT PANEL replacement, be sure to keep a record of the reading before and after the service so that the correct mileage can be determined. The trip odometer shows individual trip mileage. To switch from odometer to trip odometer, press the Trip Odometer button. To reset a trip odometer, display the desired trip odometer to be reset then push and hold the button until the display resets (approximately two seconds). 12.
UNDERSTANDING YOUR INSTRUMENT PANEL seconds after a single chime has sounded to indicate the next scheduled oil change interval. The engine oil change indicator system is duty cycle-based, which means the engine oil change interval may fluctuate dependent upon your personal driving style. Unless reset, this message will continue to display each time you turn the ignition switch to the ON/RUN position. To turn off the message temporarily, press and release the Trip Odometer button on the instrument cluster.
232 UNDERSTANDING YOUR INSTRUMENT PANEL 15. Malfunction Indicator Light This light is part of an onboard diagnostic system called OBD that monitors engine and automatic transmission control systems. The light will illuminate when the key is in the ON position before engine start. If the bulb does not come on when turning the key from OFF to ON, have the condition checked promptly. Certain conditions such as a loose or missing gas cap, poor fuel quality, etc. may illuminate the light after engine start.
UNDERSTANDING YOUR INSTRUMENT PANEL require towing. The light will come on when the ignition is first turned ON and remain on briefly as a bulb check. If the light does not come on during starting, have the system checked by an authorized dealer. 18. Oil Pressure Warning Light This light shows low engine oil pressure. The light should turn on momentarily when the engine is started. If the light turns on while driving, stop the vehicle and shut off the engine as soon as possible.
234 UNDERSTANDING YOUR INSTRUMENT PANEL during starting, stays on, or turns on while driving, have the system inspected by an authorized dealer as soon as possible. 23. Voltage Light This light monitors the electrical system voltage. The light should turn on momentarily as the engine is started. If the light stays on or turns on while driving, it indicates a problem with the charging system. Immediate service should be obtained. 24. Low Fuel Light When the fuel level reaches approximately 2.0 gallons (7.
UNDERSTANDING YOUR INSTRUMENT PANEL reduces fuel efficiency and tire tread life, and may affect the vehicle’s handling and stopping ability. NOTE: Please note that the TPMS is not a substitute for proper tire maintenance, and it is the driver’s responsibility to maintain correct tire pressure, even if underinflation has not reached the level to trigger illumination of the TPMS low tire pressure telltale.
236 UNDERSTANDING YOUR INSTRUMENT PANEL For additional information on TPMS, refer to Section 5 — Starting and Operating, “Tire Pressure Monitoring System” of this manual. For additional information on Tire Pressures, refer to Section 5 — Starting and Operating, “Tire Inflation Pressures” of this manual. 26. Electronic Stability Program (ESP) Indicator Light The malfunction lamp for the ESP is combined with BAS.
UNDERSTANDING YOUR INSTRUMENT PANEL Electronic Vehicle Information Center (EVIC) Display — If Equipped The Electronic Vehicle Information Center (EVIC) features a driver-interactive display that is located in the lower half of the speedometer. Oil Change Required Your vehicle is equipped with an engine oil change indicator system. The Oil Change Required message will flash in the EVIC display for approximately 10 seconds after a single chime has sounded to indicate the next scheduled oil change interval.
238 UNDERSTANDING YOUR INSTRUMENT PANEL COMPASS MINI-TRIP COMPUTER (CMTC) — IF EQUIPPED NOTE: The compass on your vehicle is self-calibrating, eliminating the need to manually calibrate the compass. The Compass Mini-Trip Computer features a driverinteractive display (displays information on outside temperature, compass direction, and trip information). It is located in the instrument cluster, below the Fuel and Temperature gauges.
UNDERSTANDING YOUR INSTRUMENT PANEL To reset the display shown, turn the ignition switch to the ON position, then press and hold the reset button for approximately two seconds. When the appropriate conditions exist, the following odometer messages will display: NE . . . . . . . Eight-point compass headings are displayed (N, S, E, W, NE, NW, SE, SW) 14°F. . . . . . . . . . . . Temperature (Fahrenheit or Celsius) AVG . . . . . . . . . Average Fuel Economy (U.S. or Metric) DTE . . . . . . . . . . . . . . . .
240 UNDERSTANDING YOUR INSTRUMENT PANEL Compass/Temperature Display Compass Variance Compass Variance is the difference between magnetic North and Geographic North. In some areas of the country, the difference between magnetic and geographic North is great enough to cause the compass to give false readings. In order to ensure compass accuracy, the compass variance should be properly set according to the compass variance map zone that the vehicle is in.
UNDERSTANDING YOUR INSTRUMENT PANEL 2. Press and hold (approximately 10 seconds) the CMTC reset button until the current variance zone number is displayed. 3. Release the CMTC reset button, then press and hold again (approximately 10 seconds), until the direction is displayed with the CAL indicator on continuously in the display. 4.
242 UNDERSTANDING YOUR INSTRUMENT PANEL • Compass display • Outside temperature display • Trip computer functions • Audio Modes display EVIC Menu / Step Control Button as it appears on the left side of the steering column. Press the STEP button to scroll through sub menus (i.e. Trip Functions, Avg. Fuel Economy, DTE, Elapsed Time, and Units.
UNDERSTANDING YOUR INSTRUMENT PANEL EVIC Displays When the appropriate conditions exist, the EVIC displays the following messages: • Door(s) Ajar (with a single chime if vehicle is in motion) • Liftgate Ajar (chime will sound when vehicle starts moving) • Hood Ajar (If equipped with hood switch) • Check TPM System. Refer to “Tire Pressure Monitoring System” in Section 5 of this manual.
244 UNDERSTANDING YOUR INSTRUMENT PANEL Unless reset, this message will continue to display each time you turn the ignition switch to the ON/RUN position. To turn off the message temporarily, press and release the Menu button. To reset the oil change indicator system (after performing the scheduled maintenance) refer to the following procedure. 1. Turn the ignition switch to the ON position (Do not start the engine). 2. Fully depress the accelerator pedal slowly three times within 10 seconds. 3.
UNDERSTANDING YOUR INSTRUMENT PANEL Distance To Empty (DTE) Shows the estimated distance that can be traveled with the fuel remaining in the tank. This estimated distance is determined by a weighted average of the instantaneous and average fuel economy, according to the current fuel tank level. NOTE: Significant changes in driving style or vehicle loading will greatly affect the actual drivable distance of the vehicle, regardless of the DTE displayed value.
246 UNDERSTANDING YOUR INSTRUMENT PANEL COMPASS DISPLAY The compass readings indicate the direction the vehicle is facing. Press and release the compass button to display one of eight compass readings and the outside temperature. Automatic Compass Calibration This compass is self-calibrating, which eliminates the need to manually reset the compass. When the vehicle is new, the compass may appear erratic and the EVIC will display CAL until the compass is calibrated.
UNDERSTANDING YOUR INSTRUMENT PANEL Compass Variance Compass Variance is the difference between magnetic North and Geographic North. In some areas of the country, the difference between magnetic and geographic North is great enough to cause the compass to give false readings. For the most accurate compass performance, the compass variance must be set using the following procedure: NOTE: Magnetic materials should be kept away from the top of the instrument panel. This is where the compass sensor is located.
248 UNDERSTANDING YOUR INSTRUMENT PANEL 1. Turn the ignition switch ON. 2. Press and hold the compass button for approximately two seconds. 3. Press the STEP button until “Compass Variance” message and the last variance zone number displays in the EVIC. 4. Press and release STEP button until the proper variance zone is selected according to the map. 5. Press and release the compass button to exit.
UNDERSTANDING YOUR INSTRUMENT PANEL 249 Unlock Doors Automatically on Exit When ON is selected, all doors will unlock when the vehicle is stopped and the transmission is in the PARK or NEUTRAL position and the driver’s door is opened. To make your selection, press and release the RESET button until ON or OFF appears. Sound Horn with Remote Key Lock When ON is selected, a short horn sound will occur when the remote keyless entry LOCK button is pressed.
250 UNDERSTANDING YOUR INSTRUMENT PANEL SELECT button until YES (Y) or NO (N) appears. Refer to “Lights/SmartBeams — If Equipped” in Section 3 of this manual for more information. when exiting the vehicle. To make your selection, press and release the RESET button until 0, 30, 60, or 90 appears.
UNDERSTANDING YOUR INSTRUMENT PANEL Rear Park Assist System — If Equipped When ENABLE is selected, the Rear Park Assist System is activated. When DISABLE is selected, the System is deactivated and, the instrument cluster will display the 9PARK ASSIST DISABLED9 message. Display Units of Measure in The EVIC, odometer, and navigation system (if equipped) can be changed between English and Metric units of measure. To make your selection, press and release the RESET button until US or METRIC appears.
252 UNDERSTANDING YOUR INSTRUMENT PANEL FM Reception Because FM transmission is based on frequency variations, interference that consists of amplitude variations can be filtered out, leaving the reception relatively clear, which is the major feature of FM radio. NOTE: The radio, steering wheel radio controls (if equipped), and six-disc CD/DVD changer (if equipped) will remain active for up to 90 seconds after the ignition switch has been turned OFF, depending upon the EVIC, Accessory Delay setting.
UNDERSTANDING YOUR INSTRUMENT PANEL When the audio system is turned on, the sound will be set at the same volume level as last played. SEEK Buttons Press and release the SEEK buttons to search for the next listenable station in AM/FM mode. Press the right switch to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection. Holding either button will bypass stations without stopping until you release it.
254 UNDERSTANDING YOUR INSTRUMENT PANEL TIME Button Press the TIME button and the time of day will display. In AM or FM mode, pressing the TIME button will switch between the time and frequency displays. The clock can also be set by pressing the SETUP button and selecting the “SET HOME CLOCK” entry. Once in this display follow the above procedure, starting at Step 2. Clock Setting Procedure INFO Button Press the INFO button for an RDS station (one with call letters displayed).
UNDERSTANDING YOUR INSTRUMENT PANEL 255 Setting the Tone, Balance, and Fade Push the rotary Tune/Scroll control knob and BASS will display. Turn the Tune/Scroll control knob to the right or left to increase or decrease the bass tones. Push the rotary Tune/Scroll control knob a fifth time and FADE will display. Turn the Tune/Scroll control knob to the left or right to adjust the sound level between the front and rear speakers. Push the rotary Tune/Scroll control knob a second time and MID will display.
256 UNDERSTANDING YOUR INSTRUMENT PANEL Program Type No program type or undefined Adult Hits Classical Classic Rock College Country Foreign Language Information Jazz News Nostalgia Oldies Personality Public 16-Digit Character Display None Adlt Hit Classicl Cls Rock College Country Language Inform Jazz News Nostalga Oldies Persnlty Public Program Type Rhythm and Blues Religious Music Religious Talk Rock Soft Soft Rock Soft Rhythm and Blues Sports Talk Top 40 Weather 16-Digit Character Display R&B Rel Mu
UNDERSTANDING YOUR INSTRUMENT PANEL 257 station with the same selected Music Type name. The Music Type function only operates when in the FM mode. • DISC Play/Pause - You can toggle between playing the DVD and pausing the DVD by pushing the SELECT button (if equipped). If a preset button is activated while in the Music Type (Program Type) mode, the Music Type mode will be exited and the radio will tune to the preset station.
258 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: These selections can only be made while playing a DVD. • VESt Power - Allows you to turn VESt on and off (if equipped). • VESt Lock - Locks out rear VESt remote controls (if equipped). • VESt CH1/CH2 - Allows the user to change the mode of either the IR1 or IR2, wireless headphones by pressing the AUDIO/SELECT button (if equipped). • Set Home Clock - Pressing the SELECT button allows you to set the clock.
UNDERSTANDING YOUR INSTRUMENT PANEL 259 Subtitle Language — If Equipped Aspect Ratio — If Equipped Selecting this item allows you to choose a default subtitle language (effective only if the language is supported by the disc). You can select a language not listed by scrolling down and selecting 9other.9 Enter the country code using the Tune/Scroll control knob to scroll up and down to select the number and then push to select.
260 UNDERSTANDING YOUR INSTRUMENT PANEL SET Button — To Set the Pushbutton Memory When you are receiving a station that you wish to commit to pushbutton memory, press the SET button. The symbol SET 1 will now show in the display window. Select the button (1-6) you wish to lock onto this station and press and release that button. If a button is not selected within five seconds after pressing the SET button, the station will continue to play but will not be stored into pushbutton memory.
UNDERSTANDING YOUR INSTRUMENT PANEL CAUTION! The radio may shut down during extremely hot conditions. When this occurs, the radio will indicate “Disc Hot” and shut off until a safe temperature is reached. This shutdown is necessary to protect the optics of the DVD player and other radio internal components. NOTE: The ignition switch must be in the ON or ACC position to operate the radio.
262 UNDERSTANDING YOUR INSTRUMENT PANEL Press and hold the EJECT button for five seconds and all CDs will be ejected from the radio. The disc can be ejected with the radio and ignition OFF. SEEK Button (CD MODE) Press the right SEEK button for the next selection on the CD. Press the left SEEK button to return to the beginning of the current selection, or return to the beginning of the previous selection if the CD is within the first second of the current selection.
UNDERSTANDING YOUR INSTRUMENT PANEL 263 Supported Medium Formats (File Systems) The medium formats supported by the radio are ISO 9660 Level 1 and Level 2 and includes the Joliet extension. When reading discs recorded using formats other than ISO 9660 Level 1 and Level 2, the radio may fail to read files properly and may be unable to play the file normally. UDF and Apple HFS formats are not supported. Multisession disc formats are supported by the radio.
264 UNDERSTANDING YOUR INSTRUMENT PANEL When using the MP3/WMA encoder to compress audio data to an MP3/WMA file, the bit rate and sampling frequencies in the following table are supported. In addition, Variable Bit Rates (VBR) are also supported. The majority of MP3/WMA files use a 44.1 kHz sampling rate and a 192, 160, 128, 96 or VBR bit rates. MP3 File Format MPEG Specification Sampling Frequency (kHz) MPEG-1 Audio Layer 3 48, 44.1, 32 MPEG-2 Audio Layer 3 24, 22.
UNDERSTANDING YOUR INSTRUMENT PANEL Loading times for playback of MP3/WMA files may be affected by the following: • Media - CD-RW media may take longer to load than CD-R media • Medium formats - Multisession discs may take longer to load than non-multisession discs • Number of files and folders - Loading times will increase with more files and folders To increase the speed of disc loading, it is recommended to use CD-R media and single-session discs.
266 UNDERSTANDING YOUR INSTRUMENT PANEL Press and hold the INFO button again for three seconds to return to 9elapsed time9 display. SCAN Button (Auxiliary Mode) No function. Operation Instructions - Auxiliary Mode The auxiliary (AUX) jack is an audio input jack, which allows the user to plug in a portable device such as an MP3/WMA player, cassette player, or microphone and utilize the vehicle’s audio system to amplify the source and play through the vehicle speakers.
UNDERSTANDING YOUR INSTRUMENT PANEL 267 Operating Instructions — Voice Recognition System (VR) (If Equipped) For the radio, refer to “Voice Recognition System (VR)” in Section 3. Dolbyt Manufactured under license from Dolbyt Laboratories. 9Dolbyt9 and the double-D symbol are trademarks of Dolbyt Laboratories. For UConnectt “Voice Recognition System (VR)” refer to “Hands-Free Communication (UConnectt)” in Section 3.
268 UNDERSTANDING YOUR INSTRUMENT PANEL SALES CODE RES — AM/FM STEREO RADIO WITH CD PLAYER (MP3 AUX JACK) NOTE: The radio sales code is located on the lower right side of your radio faceplate. Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/Volume Control (Rotary) Push the On/Volume control knob to turn on the radio. Push the On/Volume control knob a second time to turn off the radio.
UNDERSTANDING YOUR INSTRUMENT PANEL to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection. Holding either button will bypass stations without stopping until you release it. SCAN Button Pressing the SCAN button causes the tuner to search for the next listenable station in AM or FM frequencies, pausing for five seconds at each listenable station before continuing to the next. To stop the search, press the SCAN button a second time.
270 UNDERSTANDING YOUR INSTRUMENT PANEL 2. Adjust the hours by turning the right side Tune/Scroll control knob. 3. After adjusting the hours, press the right side Tune/ Scroll control knob to set the minutes. The minutes will begin to blink. 4. Adjust the minutes using the right side Tune/Scroll control knob. Press the Tune/Scroll control knob to save time change. 5. To exit, press any button/knob or wait five seconds. The clock can also be set by pressing the SETUP button.
UNDERSTANDING YOUR INSTRUMENT PANEL Push the rotary Tune/Scroll control knob a second time and MID will display. Turn the Tune/Scroll control knob to the right or left to increase or decrease the mid-range tones. Push the rotary Tune/Scroll control knob a third time and TREBLE will display. Turn the Tune/Scroll control knob to the right or left to increase or decrease the treble tones. Push the rotary Tune/Scroll control knob a fourth time and BALANCE will display.
272 UNDERSTANDING YOUR INSTRUMENT PANEL Program Type Foreign Language Information Jazz News Nostalgia Oldies Personality Public Rhythm and Blues Religious Music Religious Talk Rock Soft Soft Rock Soft Rhythm and Blues 16-Digit Character Display Language Inform Jazz News Nostalga Oldies Persnlty Public R&B Rel Musc Rel Talk Rock Soft Soft Rck Soft R & B Program Type Sports Talk Top 40 Weather 16-Digit Character Display Sports Talk Top 40 Weather By pressing the SEEK button when the Music Type icon is d
UNDERSTANDING YOUR INSTRUMENT PANEL 273 SETUP Button Pressing the SETUP button allows you to select between the following items: selected within five seconds after pressing the SET button, the station will continue to play but will not be stored into pushbutton memory. • Set Clock — Pressing the SELECT button will allow you to set the clock. Turn the Tune/Scroll control knob to adjust the hours and then press and turn the Tune/Scroll control knob to adjust the minutes.
274 UNDERSTANDING YOUR INSTRUMENT PANEL DISC Button Pressing the DISC button will allow you to switch from AM/FM modes to Disc modes. Operation Instructions - CD MODE for CD and MP3 Audio Play NOTE: The ignition switch must be in the ON or ACC position to operate the radio. NOTE: This radio is capable of playing compact discs (CD), recordable compact discs (CD-R), rewritable compact discs (CD-RW), compact discs with MP3 tracks and multisession compact discs with CD and MP3 tracks.
UNDERSTANDING YOUR INSTRUMENT PANEL CAUTION! • This CD player will accept 4–3/4 in (12 cm) discs only. The use of other sized discs may damage the CD player mechanism. • Do not use adhesive labels. These labels can peel away and jam the player mechanism. • RES is a single CD player. Do not attempt to insert a second CD if one is already loaded. • Dual-media disc types (one side is a DVD, the other side is a CD) should not be used, and they can cause damage to the player.
276 UNDERSTANDING YOUR INSTRUMENT PANEL TIME Button Press this button to change the display from a large CD playing time display to a small CD playing time display. RW/FF Press the RW button to stop the CD at the beginning of the current CD track/title. Press and hold FF (Fast Forward) and the CD player will begin to fast forward until FF is released or RW or another CD button is pressed. The RW (Reverse) button works in a similar manner.
UNDERSTANDING YOUR INSTRUMENT PANEL files properly and may be unable to play the file normally. UDF and Apple HFS formats are not supported. The radio uses the following limits for file systems: • Maximum number of folder levels: 8 • Maximum number of files: 255 • Maximum number of folders. (The radio display of file names and folder names is limited. For large numbers of files and/or folders, the radio may be unable to display the file name and folder name and will assign a number instead.
278 UNDERSTANDING YOUR INSTRUMENT PANEL rates (VBR) are also supported. The majority of MP3 files use a 44.1 kHz sampling rate and a 192, 160, 128, 96 or VBR bit rates. MPEG Specification Sampling Frequency (kHz) MPEG-1 Audio Layer 3 48, 44.1, 32 MPEG-2 Audio Layer 3 24, 22.
UNDERSTANDING YOUR INSTRUMENT PANEL LIST Button (CD Mode for MP3 Play) Pressing the LIST button will bring up a list of all folders on the disc. Scrolling up or down the list is done by turning the Tune/Scroll control knob. Selecting a folder by pressing the Tune/Scroll control knob will begin playing the files contained in that folder (or the next folder in sequence if the selection does not contain playable files). The folder list will time out after five seconds.
280 UNDERSTANDING YOUR INSTRUMENT PANEL TIME Button (Auxiliary Mode) Press this button to change the display to time of day. The time of day will display for five seconds (when ignition is OFF). Operating Instructions - Hands-Free Phone (UConnectt) (If Equipped) Refer to “Hands-Free Communication (UConnectt)” in Section 3. Operating Instructions - Satellite Radio Mode (If Equipped) Refer to “Satellite Radio” in this section.
UNDERSTANDING YOUR INSTRUMENT PANEL 281 through the system’s wireless headphones. This means rear seat passengers can watch a DVD on the optional rear seat entertainment system, while the driver and front-seat passenger listen to the radio. Operating Instructions — Voice Recognition System (VR) (If Equipped) For the radio, refer to “Voice Recognition System (VR)” in Section 3.
282 UNDERSTANDING YOUR INSTRUMENT PANEL 3. To move the hour forward, touch the screen where the word “Hour” with the arrow pointing upward is displayed. To move the hour backward, touch the screen where the word “Hour” with the arrow pointing downward is displayed. 4. To move the minute forward, touch the screen where the word “Min” with the arrow pointing upward is displayed. To move the minute backward, touch the screen where the word “Min” with the arrow pointing downward is displayed. 5.
UNDERSTANDING YOUR INSTRUMENT PANEL 283 Touch the screen where the words “Show Time if Radio is Off” are displayed to change the current setting. SALES CODE RER — MULTIMEDIA SYSTEM — IF EQUIPPED Changing the Time Zone NOTE: The sales code is located on the lower right side of the unit’s faceplate. 1. Turn on the multimedia system. 2. Touch the screen where the time is displayed. The clock setting menu will appear on the screen. 3. Touch the screen where the words “Set Time Zone” are displayed.
284 UNDERSTANDING YOUR INSTRUMENT PANEL The satellite navigation capability combines a GlobalPositioning System (GPS)-based navigation system with an integrated color screen to provide maps, turn identification, selection menus, and instructions for selecting a variety of destinations and routes. A shared HDD for the navigation system, the database, and other radio features allows uploads of music and photos from CDs or through the USB port.
UNDERSTANDING YOUR INSTRUMENT PANEL Clock Setting Procedure The GPS receiver in this system is synchronized to the time data being transmitted by the GPS satellites. The satellites’ clock is Greenwich Mean Time (GMT). This is the worldwide standard for time. This makes the system’s clock very accurate once the appropriate time zone and daylight savings information is set. Changing the Time Zone 1. Turn on the multimedia system. 2. Touch the screen where the time is displayed.
286 UNDERSTANDING YOUR INSTRUMENT PANEL 3. When this feature is on, a check mark will appear in the box next to the words “Daylight Savings.” Touch the screen where the words “Daylight Savings” are displayed to change the current setting. Setting the User Clock If you wish to set the clock to a time different from the system clock, you can manually adjust the time by performing the following: 1. Turn on the multimedia system. 2. Touch the screen where the time is displayed.
UNDERSTANDING YOUR INSTRUMENT PANEL 2. Touch the screen where the time is displayed. The clock setting menu will appear on the screen. 3. When this feature is on, a check mark will appear in the box next to the words “Show Time if Radio is Off.” Touch the screen where the words “Show Time if Radio is Off” are displayed to change the current setting.
288 UNDERSTANDING YOUR INSTRUMENT PANEL To access the ESN/SID, refer to the following steps: ESN/SID Access With REQ/RES Radios With the ignition switch in the ON/RUN or ACC position and the radio on, press the SETUP button and scroll using the Tune/Scroll control knob until Sirius ID is selected. Press the Tune/Scroll control knob and the Sirius ID number will display. The Sirius ID number display will time out in two minutes. Press any button on the radio to exit this screen.
UNDERSTANDING YOUR INSTRUMENT PANEL Reception Quality Satellite reception may be interrupted due to one of the following reasons: • The vehicle is parked in an underground parking structure or under a physical obstacle. • Dense tree coverage may interrupt reception in the form of short audio mutes. • Driving under wide bridges or along tall buildings can cause intermittent reception. • Placing objects over or too close to the antenna can cause signal blockage.
290 UNDERSTANDING YOUR INSTRUMENT PANEL additional three seconds will make the radio display the Song Title all of the time (press and hold again to return to normal display). or turning the Tune/Scroll control knob within five seconds will allow the program format type to be selected. INFO Button — REU Radio Pressing the INFO button will display information about Artist, Song Title, and Composer (if available). Pressing the INFO button again will close the INFO screen.
UNDERSTANDING YOUR INSTRUMENT PANEL 291 Pressing the MUSIC TYPE button again will close the MUSIC TYPE screen. Once closed, seek up, seek down, and scan will no longer be based on your selection. selected within five seconds after pressing the SET button, the channel will continue to play but will not be stored into pushbutton memory.
292 UNDERSTANDING YOUR INSTRUMENT PANEL Operating Instructions - Hands-Free Phone (If Equipped) Refer to “Hands-Free Communication (UConnectt)” in Section 3. Operating Instructions - Video Entertainment System (VEST) (If Equipped) Refer to separate “Video Entertainment System (VESt) Guide.” UNIVERSAL CONSUMER INTERFACE (UCI) — IF EQUIPPED NOTE: This section is for sales code RES/REL and REQ/RET radios only with UConnectt.
UNDERSTANDING YOUR INSTRUMENT PANEL Connecting The iPodT Device Use the optional connection cable to connect an iPodt to the vehicle’s UCI connector (which is located in the glove box or center console on some vehicles. This location may vary with vehicle). Once the iPodt is connected and synchronized to the vehicle system (this may take a few seconds to connect), the vehicle brand logo appears on the iPodt display, and it starts charging and is ready for use by pressing radio switches as described below.
294 UNDERSTANDING YOUR INSTRUMENT PANEL RW (Rewind) Button Press and hold the RW button to move backward in the current track. Holding the RW button long enough will take you back to the beginning of the current track. Pressing and releasing the RW button will go back five seconds of the current track. FF (Fast Forward) Button Press and hold the FF button to move forward in the current track. Pressing and releasing the FF button will go forward five seconds of the current track.
UNDERSTANDING YOUR INSTRUMENT PANEL SCAN Button Pressing the SCAN button will play the first five seconds of each track in the current list and then forward to the next song. To stop the SCAN mode and start playing the desired track, press the SCAN button again. During the SCAN mode, you can also press the SEEK button to the left or right to go to the previous or next tracks.
296 UNDERSTANDING YOUR INSTRUMENT PANEL Radio Preset Buttons In the List mode, the radio preset buttons are used as shortcuts to the following lists on the iPodt device. • 1 – Playlists • 2 – Artists • 3 – Albums • 4 – Genres • 5 - Audiobooks • 6 – Podcasts After pressing a preset button, you will see the list you are in on the top line and the first item in that list on the second line. To exit the List mode without selecting a track, press the same preset button again to go back to Play mode.
UNDERSTANDING YOUR INSTRUMENT PANEL SIRIUS BACKSEAT TV™ — IF EQUIPPED Satellite video uses direct satellite receiver broadcasting technology to provide streaming video coast to coast. The subscription service provider is SIRIUS Satellite Radio. SIRIUS Backseat TV™ offers three video channels for family entertainment, directly from its satellites and broadcasting studios. NOTE: SIRIUS service is not available in Hawaii and has limited coverage in Alaska.
298 UNDERSTANDING YOUR INSTRUMENT PANEL • Nine different medias to choose from in each screen (AM, FM, Sirius Radio, DVD1, DVD2, Hard Drive Jukebox, AUX in radio, AUX1, AUX2). The LCD screen(s) are located in the overhead compartment console. VESt Remote Control Location NOTE: Refer to your VESt User’s Manual for detailed operating instructions.
UNDERSTANDING YOUR INSTRUMENT PANEL 299 RADIO OPERATION AND CELLULAR PHONES Under certain conditions, the cellular phone being ON in your vehicle can cause erratic or noisy performance from your radio. This condition may be lessened or eliminated by relocating the cellular phone antenna. This condition is not harmful to the radio.
300 UNDERSTANDING YOUR INSTRUMENT PANEL CD Player Pressing the top of the switch once will go to the next track on the CD. Pressing the bottom of the switch once will go to the beginning of the current track or to the beginning of the previous track if it is within one second after the current track begins to play. If you press the switch up or down twice it plays the second track, three times, it will play the third, etc. The button in the center of the left-hand switch has no function in this mode.
UNDERSTANDING YOUR INSTRUMENT PANEL 301 CLIMATE CONTROLS The Climate Control System allows you to regulate the temperature, amount, and direction of air circulating throughout the vehicle. The controls are located on the instrument panel, below the radio. MANUAL HEATING, VENTILATION AND AIR CONDITIONING (HVAC) SYSTEM The controls for the manual HVAC system in this vehicle consist of a series of outer rotary dials inner push knobs. These comfort controls can be set to obtain desired interior conditions.
302 UNDERSTANDING YOUR INSTRUMENT PANEL Front Blower Control There are four blower speeds. Use this control to regulate the amount of air forced through the system in any mode you select. The blower speed increases as you move the control clockwise from the off position. Temperature Control Use this control to regulate the temperature of the air inside the passenger compartment.
UNDERSTANDING YOUR INSTRUMENT PANEL PANEL Mode Air is directed through the outlets in the instrument panel. These outlets can be adjusted to direct airflow. BI-LEVEL Mode Air is directed through the panel and floor outlets. 303 MIX Mode Air is directed through the floor, defrost and side window demist outlets. This setting works best in cold or snowy conditions that require extra heat at the windshield. This setting is good for maintaining comfort while reducing moisture on the windshield.
304 UNDERSTANDING YOUR INSTRUMENT PANEL RECIRCULATION Control Press this button to choose between outside air intake or recirculation of the air inside the vehicle. A lamp will illuminate when you are in RECIRCULATION mode. Only use the RECIRCULATION mode to temporarily block out any outside odors, smoke, or dust and to cool the interior rapidly upon initial start up in very hot or humid weather. NOTE: • Continuous use of the RECIRCULATION mode may make the inside air stuffy and window fogging may occur.
UNDERSTANDING YOUR INSTRUMENT PANEL ECONOMY Mode If ECONOMY mode is desired, press the A/C button to turn off the indicator light and the A/C compressor. Rotate the temperature control knob to the desired temperature. Air Conditioning Operation Push on this button to engage the Air Conditioning. A light will illuminate when the A/C System is engaged 305 NOTE: The air conditioning compressor will not engage until the engine has been running for about 10 seconds.
306 UNDERSTANDING YOUR INSTRUMENT PANEL The Three Zone Basic Temperature Control bottom panel controls rear Heating, Ventilation, and Air Conditioning (HVAC) operations.
UNDERSTANDING YOUR INSTRUMENT PANEL 307 The primary control for the rear blower is on the front climate control unit located on the instrument panel. The front climate control unit has five positions, off, rear, and a range of blower speeds. Only when the primary control for the rear blower is in the REAR position do the second seat occupants have control of the rear blower speed.
308 UNDERSTANDING YOUR INSTRUMENT PANEL Only when the front control for the rear blower is in the RR position do the second seat occupants have control of the rear blower speed. The rear blower control, located in the rear overhead console has an off position and a range of blower speeds. This allows the second seat occupants to control the volume of air circulated in the rear of the vehicle.
UNDERSTANDING YOUR INSTRUMENT PANEL 309 control is in FLOOR, DEFROST, or MIX modes, airflow will be directed out of the rear floor outlets. AUTOMATIC TEMPERATURE CONTROL (ATC) — IF EQUIPPED Rear Mode Control • Front Three Zone ATC allows both the driver and front occupant and rear seat occupants to select individual comfort settings FLOOR Mode Air comes from the floor outlets. BI-LEVEL Mode Air comes from both the headliner outlets and the floor outlets.
310 UNDERSTANDING YOUR INSTRUMENT PANEL The Infrared Three-Zone ATC System automatically maintains the interior comfort level desired by the driver and all passengers. This is accomplished by an infrared sensor, located in the forward overhead console. Based on the sensor input, the system automatically adjusts the air temperature, the airflow volume, and amount of outside air recirculation. This maintains a comfortable temperature even under changing conditions.
UNDERSTANDING YOUR INSTRUMENT PANEL Below the automatic control, the system selects the appropriate mode (airflow outlets) and fan speed. 311 Operation of the system is quite simple. 1. Press the AUTO button and the word AUTO will illuminate in the front ATC display, along with three temperatures for Driver’s, Passenger, and Rear seats. The system will then automatically regulate the amount of airflow. 2.
312 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: • It is not necessary to move the temperature settings for cold or hot vehicles. The system automatically adjusts the temperature, mode and fan speed to provide comfort as quickly as possible. Manual Operation This system offers a full complement of manual override features. The AUTO symbol in the front ATC display will be turned off when the system is being used in the manual mode. • The temperature can be displayed in U.S.
UNDERSTANDING YOUR INSTRUMENT PANEL PANEL Mode Air comes from the outlets in the instrument panel. Each of these outlets can be individually adjusted to direct the flow of air. Moving the air vanes of the center outlets down, will close off the airflow from the center outlets. The thumbwheel next to the outboard outlets can be rotated to regulate or shut off the airflow from these outlets. BI-LEVEL Mode Air comes from both the instrument panel outlets, floor outlets and defrost.
314 UNDERSTANDING YOUR INSTRUMENT PANEL The SNOWFLAKE mode or A/C button allows the operator to manually activate or deactivate the air conditioning system. When in SNOWFLAKE mode the ATC display is on, cool, dehumidified air flows through the air outlets. If ECONOMY mode is desired, press the SNOWFLAKE button to turn off the SNOWFLAKE mode in the ATC display and deactivate the A/C system. Note: If fog or mist appears on the windshield or side glass, select DEFROST mode and increase blower speed.
UNDERSTANDING YOUR INSTRUMENT PANEL 315 The REAR SYSTEM control for the Rear ATC System is on the front ATC control unit located on the instrument panel. Pressing the REAR LOCK button for the Rear ATC System from the front ATC control unit, illuminates a LOCK symbol in the rear display. The rear temperature and air source are controlled from the front ATC control unit. 4 Rear second row occupants can only adjust the rear ATC control when the REAR LOCK button is turned off.
316 UNDERSTANDING YOUR INSTRUMENT PANEL Operation of the rear system is quite simple. 1. Press the REAR LOCK button on the front ATC control unit. This turns off the REAR LOCK icon in the rear temperature knob. 2. Rotate the Rear Blower, Rear Temperature and the Rear Mode Control knobs to suit your comfort needs. 3. ATC is selected by adjusting the rear blower knob counterclockwise to AUTO.
UNDERSTANDING YOUR INSTRUMENT PANEL CAUTION! Interior air enters the Rear Automatic Temperature Control System through an intake grille located in the passenger side trim panel behind the third seat. The heater outlets are located in the passenger side trim panel just behind the sliding door. Do not block or place objects directly in front of the inlet grille or heater outlets. The electrical system could overload causing damage to the blower motor.
318 UNDERSTANDING YOUR INSTRUMENT PANEL HEADLINER Mode Air comes from the outlets in the headliner. Each of these outlets can be individually adjusted to direct the flow of air. Moving the air vanes of the outlets to one side will shut off the airflow. SUMMER OPERATION The engine cooling system in air conditioned vehicles must be protected with a high-quality antifreeze coolant to provide proper corrosion protection and to protect against engine overheating.
UNDERSTANDING YOUR INSTRUMENT PANEL OUTSIDE AIR INTAKE Make sure the air intake, located directly in front of the windshield, is free of obstructions such as leaves. Leaves collected in the air intake may reduce airflow and if they enter the plenum they could plug the water drains. In winter months make sure the air intake is clear of ice, slush and snow.
320 UNDERSTANDING YOUR INSTRUMENT PANEL A/C AIR FILTER — IF EQUIPPED On vehicles equipped with Automatic Temperature Control (ATC), the climate control system filters out dust and pollen from the air. Refer to Section 7 “Air Conditioning” for filter replacement instructions. NOTE: You may turn off the heated mirror feature at anytime by pressing the rear window defogger switch a second time.
STARTING AND OPERATING CONTENTS m Starting Procedures . . . . . . . . . . . . . . . . . . . . . 324 m Brake System . . . . . . . . . . . . . . . . . . . . . . . . . . 337 ▫ Automatic Transmission . . . . . . . . . . . . . . . . 325 ▫ Anti-Lock Brake System (ABS) . . . . . . . . . . . . 338 m Engine Block Heater — If Equipped . . . . . . . . . 327 m Electronic Brake Control Systems . . . . . . . . . . . . 340 m Automatic Transmission . . . . . . . . . . . . . . . . . .
322 STARTING AND OPERATING ▫ Flowing/Rising Water . . . . . . . . . . . . . . . . . . 346 ▫ 3.3L & 3.8L Gasoline Engine . . . . . . . . . . . . . . 377 m Tire Safety Information . . . . . . . . . . . . . . . . . . . 348 m Adding Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . 382 ▫ Tire Markings . . . . . . . . . . . . . . . . . . . . . . . . 348 ▫ Fuel Filler Cap (Gas Cap) . . . . . . . . . . . . . . . 382 ▫ Tire Loading And Tire Pressure . . . . . . . . . . .
STARTING AND OPERATING 323 ▫ Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . 388 ▫ Common Towing Definitions . . . . . . . . . . . . . 393 m Vehicle Loading . . . . . . . . . . . . . . . . . . . . . . . . 388 ▫ Towing Tips . . . . . . . . . . . . . . . . . . . . . . . . . 405 ▫ Vehicle Certification Label . . . . . . . . . . . . . . . 389 m Recreational Towing (Behind Motorhome, Etc.) . . 407 m Trailer Towing . . . . . . . . . . . . . . . . . . . . . . . . .
324 STARTING AND OPERATING STARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust the inside and outside mirrors, fasten your seat belt, and if present, instruct all other occupants to buckle their seat belts. WARNING! DO NOT leave animals or children inside parked vehicles in hot weather. Interior heat build-up may cause serious injury or death. WARNING! NEVER leave unattended children alone in a vehicle. Leaving children in a vehicle is dangerous for a number of reasons.
STARTING AND OPERATING Automatic Transmission The gear selector lever must be in the NEUTRAL or PARK position before you can start the engine. Depress the brake pedal before shifting into any driving gear. Normal Starting (Above 32°F/0°C) 1. DO NOT depress the accelerator. 2. Use the Fob with Integrated Key to briefly turn the ignition switch to the START position and release it as soon as the starter engages.
326 STARTING AND OPERATING If The Engine Fails To Start WARNING! • NEVER pour fuel or other flammable liquids into the throttle body air inlet opening in an attempt to start the vehicle. This could result in a flash fire causing serious personal injury. • DO NOT attempt to push or tow your vehicle to get it started. Vehicles equipped with an automatic transmission cannot be started this way.
STARTING AND OPERATING If the engine shows no sign of starting after two 15– second intervals of cranking with the accelerator pedal held to the floor, the “Normal Starting” procedure should be repeated. After Starting The idle speed will automatically decrease as the engine warms up. 327 ENGINE BLOCK HEATER — IF EQUIPPED The engine block heater warms engine coolant and permits quicker starts in cold weather.
328 STARTING AND OPERATING AUTOMATIC TRANSMISSION CAUTION! Damage to the transmission may occur if the following precautions are not observed: • Shift the gear selector lever into PARK only after the vehicle has come to a complete stop. • Do not shift the gear selector lever from REVERSE, PARK, or NEUTRAL into any forward gear when the engine is above idle speed. • Before shifting the gear selector lever into any gear, make sure your foot is firmly on the brake pedal.
STARTING AND OPERATING while the ignition switch is in the ON position. Always press the brake pedal first before moving the gear selector lever out of PARK. Automatic Transmission Ignition Interlock System For electrical system malfunctions, there is an override for the interlock system. In order to override this system, remove the cover located to the top right of the gear selector lever in the instrument panel.
330 STARTING AND OPERATING the instrument cluster will display transmission gear selection as 6, 5, 4, 3, 2, 1 for six-speed and 4, 3, 2, 1 for four-speed transmissions. Gear Ranges DO NOT race the engine when shifting the gear selector lever from PARK or NEUTRAL positions into another gear range. PARK Shifting the gear selector lever in PARK supplements the parking brake by locking the transmission. The engine can be started in this gear. Never attempt to use PARK while vehicle is in motion.
STARTING AND OPERATING WARNING! Unintended movement of a vehicle could injure those in and near the vehicle. As with all vehicles, you should never exit a vehicle while the engine is running. Before exiting a vehicle, you should always shift the gear selector lever into PARK, remove the key from the ignition, and apply the parking brake. Once the key is removed from the ignition, the transmission gear selector lever is locked in the PARK position, securing the vehicle against unwanted movement.
332 STARTING AND OPERATING REVERSE Use REVERSE for moving the vehicle rearward. Shift into REVERSE only after the vehicle has come to a complete stop. NEUTRAL Shift the gear selector lever into this gear only after the vehicle has come to a complete stop. The engine may be started in this range. WARNING! Do not coast in NEUTRAL and never turn off the ignition to coast down a hill. These are unsafe practices that limit your response to changing traffic or road conditions.
STARTING AND OPERATING under heavy loading conditions, (i.e., in hilly terrain, traveling into strong head winds or while towing heavy trailers). Under these conditions, using the “3” range will improve performance and extend transmission life by reducing excessive shifting and heat build-up.
334 STARTING AND OPERATING Odometer Screen Display Actual Gear(s) Allowed —SixSpeed Transmission Actual Gear(s) Allowed —Four-Speed Transmission 1 2 3 4 5 6 D 1 1-2 1-3 1-4 1-5 1-6 1-6 1 1-2 1-3 1-4 N/A N/A 1–4 NOTE: To select the proper gear position for maximum deceleration (engine braking), simply press and hold the gear selector lever to the left (-). The transmission will shift to the range from which the vehicle can best be slowed down.
STARTING AND OPERATING 5. Shift into the desired gear range and resume driving. NOTE: Even if the transmission can be reset, it is recommended that you visit an authorized dealer at your earliest possible convenience. Your authorized dealer has diagnostic equipment to determine if the problem could recur. 335 selector lever in the PARK position. To release the parking brake, depress the emergency break pedal a second time and let your foot up as you feel the brake disengage.
336 STARTING AND OPERATING before placing the gear selector lever in PARK, otherwise the load on the transmission locking mechanism may make it difficult to move the gear selector lever out of PARK. WARNING! • Always fully apply the parking brake when leaving your vehicle, or it may roll and cause damage or injury. Also be certain to leave an automatic transmission in PARK, a manual transmission in REVERSE or first gear. Failure to do so may allow the vehicle to roll and cause damage or injury.
STARTING AND OPERATING BRAKE SYSTEM Your vehicle is equipped with dual hydraulic brake systems. If either of the two hydraulic systems loses normal capability, the remaining system will still function. However, there will be some loss of overall braking effectiveness. This will be evident by increased pedal travel during application and greater pedal force required to slow or stop the vehicle.
338 STARTING AND OPERATING ANTI-LOCK BRAKE SYSTEM (ABS) ABS provides increased vehicle stability and brake performance under most braking conditions. The system automatically “pumps” the brakes during severe braking conditions to prevent wheel lock-up. ABS is activated during braking under certain road or stopping conditions. ABS-inducing conditions can include ice, snow, gravel, bumps, railroad tracks, loose debris, or panic stops.
STARTING AND OPERATING WARNING! • The Anti-Lock Brake System cannot prevent accidents, including those resulting from excessive speed in turns, following another vehicle too closely, or hydroplaning. Only a safe, attentive, and skillful driver can prevent accidents. • The capabilities of an ABS-equipped vehicle must never be exploited in a reckless or dangerous manner which could jeopardize the user’s safety or the safety of others.
340 STARTING AND OPERATING to the ABS system is required. Consult with your authorized dealer service center as soon as possible. ELECTRONIC BRAKE CONTROL SYSTEMS Your vehicle is equipped with an advanced electronic brake control system that includes TCS (Traction Control System), BAS (Brake Assist System) and ESP (Electronic Stability Program). These systems complement the AntiLock Brake System (ABS) by optimizing the vehicle braking capability during emergency braking maneuvers.
STARTING AND OPERATING WARNING! • The TCS cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded. • The TCS cannot prevent accidents, including those resulting from excessive speed in turns, or hydroplaning. Only a safe, attentive, and skillful driver can prevent accidents. • The capabilities of a TCS-equipped vehicle must never be exploited in a reckless or dangerous manner, which could jeopardize the user’s safety or the safety of others.
342 STARTING AND OPERATING WARNING! • BAS (Brake Assist System) cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. • BAS cannot prevent accidents, including those resulting from excessive speed in turns, driving on very slippery surfaces, or hydroplaning. Only a safe, attentive, and skillful driver can prevent accidents.
STARTING AND OPERATING ESP ON This is the normal operating mode for ESP on 2WD vehicles. Whenever the vehicle is started, the ESP system will be in this mode. This mode should be used for most driving situations. ESP should only be turned off for specific reasons as noted below. ESP Partial OFF This mode is entered by momentarily depressing the ESP OFF switch (located in the center switch bank, next to the hazard flasher switch).
344 STARTING AND OPERATING Light comes on continuously with the engine running, a malfunction has been detected in either the ESP or the BAS system. If this light remains on after several ignition cycles, and the vehicle has been driven several miles/ kilometers at speeds greater than 30 mph (48 km/h), see your authorized dealer as soon as possible to have the problem diagnosed and corrected.
STARTING AND OPERATING WARNING! Continued operation with reduced power steering assist could pose a safety risk to yourself and others. Service should be obtained as soon as possible. CAUTION! Prolonged operation of the steering system at the end of the steering wheel travel will increase the steering fluid temperature and it should be avoided when possible. Damage to the power steering pump may occur.
346 STARTING AND OPERATING TRACTION When driving on wet or slushy roads, it is possible for a wedge of water to build up between the tire and road surface. This is known as hydroplaning and may cause partial or complete loss of vehicle control and stopping ability. To reduce this possibility, the following precautions should be observed: 1. Slow down during rainstorms or when roads are slushy. 2. Slow down if the road has standing water or puddles. 3.
STARTING AND OPERATING Shallow Standing Water Although your vehicle is capable of driving through shallow standing water, consider the following Caution and Warning before doing so. CAUTION! • Always check the depth of the standing water before driving through it. Never drive through standing water that is deeper than the bottom of the tire rims mounted on the vehicle.
348 STARTING AND OPERATING WARNING! • Driving through standing water limits your vehicle’s traction capabilities. Do not exceed 5 mph (8 km/h) when driving through standing water. • Driving through standing water limits your vehicle’s braking capabilities, which increases stopping distances. Therefore, after driving through standing water, drive slowly and lightly press on the brake pedal several times to dry the brakes.
STARTING AND OPERATING 349 NOTE: • P (Passenger) - Metric tire sizing is based on U.S. design standards. P-Metric tires have the letter “P” molded into the sidewall preceding the size designation. Example: P215/65R15 95H. • LT (Light Truck) - Metric tire sizing is based on U.S. design standards. The size designation for LT-Metric tires is the same as for P-Metric tires except for the letters “LT” that are molded into the sidewall preceding the size designation. Example: LT235/85R16.
350 STARTING AND OPERATING Tire Sizing Chart P Tire Sizing Chart Passenger Car tire size based on U.S. design standards (....blank....( Passenger Car tire based on European design standards LT Light Truck tire based on U.S. design standards T Temporary spare tire 31 215 65 Overall diameter in inches (in) Section width in millimeters (mm) Aspect Ratio of section height to section width of tire, written in percent (%) 10.
STARTING AND OPERATING H 351 Tire Sizing Chart A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions The maximum speed corresponding to the speed symbol should only be achieved under specified operating conditions (i.e., tire pressure, vehicle loading, road conditions, and posted speed limits) (....blank....
352 STARTING AND OPERATING Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire, however, the date code may only be on one side. Tires with white sidewalls will have the full TIN, including the date code, located on the white sidewall side of the tire. Look for the TIN on the outboard side of black sidewall tires as mounted on the vehicle. If the TIN is not found on the outboard side, then you will find it on the inboard side of the tire.
STARTING AND OPERATING Tire Loading and Tire Pressure 353 Tire and Loading Information Placard Tire Placard Location NOTE: The proper cold tire inflation pressure is listed on either the face of the driver’s door or the driver’s side B-Pillar.
354 STARTING AND OPERATING Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. You will not exceed the tire’s load carrying capacity if you adhere to the loading conditions, tire size, and cold tire inflation pressures specified on the Tire and Loading Information placard and in the “Vehicle Loading” section of this manual.
STARTING AND OPERATING amount of available cargo and luggage load capacity is 650 lbs (295 kg) (since 5 x 150 = 750, and 1400 – 750 = 650 lbs [295 kg]). 5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4. 6. If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle.
356 STARTING AND OPERATING
STARTING AND OPERATING 2WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. 357 1. Safety— WARNING! •Improperly inflated tires are dangerous and can cause accidents. •Under-inflation increases tire flexing and can result in tire failure.
358 STARTING AND OPERATING WARNING! •Unequal tire pressures can cause steering problems. You could lose control of your vehicle. •Unequal tire pressures from one side of the vehicle to the other can cause the vehicle to drift to the right or left. •Always drive with each tire inflated to the recommended cold tire inflation pressure. 2. Economy— Improper inflation pressures can cause uneven wear patterns to develop across the tire tread.
STARTING AND OPERATING 359 CAUTION! After inspecting or adjusting the tire pressure, always reinstall the valve stem cap (if equipped). This will prevent moisture and dirt from entering the valve stem, which could damage the valve stem. Tire Placard Location The pressure should be checked and adjusted as well as inspecting for signs of tire wear or visible damage at least once a month. Use a good quality pocket-type gauge to check tire pressure.
360 STARTING AND OPERATING Tire pressures change by approximately 1 psi (7 kPa) per 12 F (7 C) of air temperature change. Keep this in mind when checking tire pressure inside a garage, especially in the winter. Example: If garage temperature = 68°F (20°C) and the outside temperature = 32°F (0°C) then the cold tire inflation pressure should be increased by 3 psi (21 kPa), which equals 1 psi (7 kPa) for every 12 F (7 C) for this outside temperature condition.
STARTING AND OPERATING Radial-Ply Tires WARNING! Combining radial ply tires with other types of tires on your vehicle will cause your vehicle to handle poorly. The instability could cause an accident. Always use radial ply tires in sets of four (or 6, in case of trucks with dual rear wheels). NEVER combine them with other types of tires. Cuts and punctures in radial tires are repairable only in the tread area because of sidewall flexing. Consult your authorized tire dealer for radial tire repairs.
362 STARTING AND OPERATING DO NOT install a wheel cover or attempt to mount a conventional tire on the compact spare wheel, since the wheel is designed specifically for the compact spare. DO NOT install more than one compact spare tire/wheel on the vehicle at any given time. CAUTION! Because of the reduced ground clearance, DO NOT take your vehicle through an automatic car wash with the compact spare installed. Damage to the vehicle may result.
STARTING AND OPERATING WARNING! • Keep the limited use spare tire inflated to the cold tire inflation pressure listed on either your tire placard or limited use spare tire and wheel assembly. • Replace (or repair) the original tire at the first opportunity and reinstall it on your vehicle. Failure to do so could result in loss of vehicle control.
364 STARTING AND OPERATING Tread Wear Indicators Tread wear indicators are in the original equipment tires to help you in determining when your tires should be replaced. Many states have laws requiring tire replacement at this point. Tire Life The service life of a tire is dependent upon varying factors including but not limited to: • Driving style • Tire pressure • Distance driven WARNING! These indicators are molded into the bottom of the tread grooves.
STARTING AND OPERATING Keep dismounted tires in a cool, dry place with as little exposure to light as possible. Protect tires from contact with oil, grease, and gasoline. Replacement Tires The tires on your new vehicle provide a balance of many characteristics. They should be inspected regularly for wear and correct cold tire inflation pressure. The manufacturer strongly recommends that you use tires equivalent to the originals in size, quality and performance when replacement is needed.
366 STARTING AND OPERATING WARNING! • NEVER use a tire with a smaller load index or capacity, other than what was originally equipped on your vehicle. Using a tire with a smaller load index could result in tire overloading and failure. You could lose control and have an accident. Alignment and Tire Balance Poor suspension alignment may result in: • Fast tire wear. • Uneven tire wear, such as feathering and one-sided wear. • Vehicle pull to right or left.
STARTING AND OPERATING TIRE CHAINS Use only compact chains, or other traction aids that meet SAE type “Class S” specifications. Chains must be the proper size for the vehicle, as recommended by the chain manufacturer. NOTE: Do not use tire chains on a compact spare tire. 367 CAUTION! To avoid damage to your vehicle or tires, observe the following precautions: • Because of restricted chain clearance between tires and other suspension components, it is important that only chains in good condition are used.
368 STARTING AND OPERATING Always use the lower suggested operating speed if both the chain manufacturer and vehicle manufacture suggest a maximum speed. This notice applies to all chain traction devices, including link and cable (radial) chains. SNOW TIRES Some areas of the country require the use of snow tires during Winter. Standard tires are of the all-season type and satisfy this requirement as indicated by the M+S designation on the tire sidewall.
STARTING AND OPERATING The suggested rotation method is the “forward-cross” shown in the following diagram. TIRE PRESSURE MONITOR SYSTEM (TPMS) The TPMS will warn the driver of a low tire pressure based on the cold inflation tire pressure requirements found on the tire placard located on the driver’s-side B-pillar. The tire pressure will vary with temperature by about 1 psi (6.9 kPa) for every 12°F (6.5°C). This means that when the outside temperature decreases, the tire pressure will 369 decrease.
370 STARTING AND OPERATING increased to the recommended cold tire placard pressure in order for the TPMS warning lamp to be turned off. The system will automatically update and the TPMS warning lamp will extinguish once the updated tire pressures have been received. The vehicle may need to be driven for up to 10 minutes above 15 mph (25 km/h) to receive this information. For example, your vehicle may have a recommended cold (parked for more than three hours) tire pressure of 35 psi (241 kPa).
STARTING AND OPERATING CAUTION! After inspecting or adjusting the tire pressure always reinstall the valve stem cap. This will prevent moisture and dirt from entering the valve stem, which could damage the TPMS SENSOR. NOTE: • The TPMS is not intended to replace normal tire care and maintenance, or to provide warning of a tire failure or condition. • The TPMS should not be used as a tire pressure gauge while adjusting your tire pressure.
372 STARTING AND OPERATING The Basic TPMS consists of the following components: • Receiver Module • Four Wheel Sensors • TPMS Telltale Warning Light The TPMS Telltale Warning Light will illuminate in the instrument cluster, and an audible chime will be activated when one or more of the four active road tire pressures are low.
STARTING AND OPERATING NOTE: 1. The compact spare tire (if equipped) does not have a TPMS sensor. Therefore the TPMS will not monitor the pressure in the compact spare tire. 2. If you install the compact spare tire in place of a road tire that has a pressure below the low-pressure warning limit, upon the next ignition key cycle, a chime will sound and the TPMS Telltale Warning Light will turn on. 3.
374 STARTING AND OPERATING • Three Trigger Modules (mounted in three of the four wheel wells) • Various TPMS Messages, which display in the Electronic Vehicle Information Center (EVIC), and graphics displaying tire pressures • Yellow TPMS Telltale Warning Light TPMS Low Pressure Warnings The TPMS Telltale Warning Light will illuminate in the instrument cluster, and an audible chime will be activated when one or more of the four active road tire pressures are low.
STARTING AND OPERATING 375 Should a low tire condition occur on any of the four active road tire(s), you should stop as soon as possible, and inflate the low tire(s) that is flashing on the graphic display to the vehicle’s recommended cold tire pressure value. The system will automatically update, the graphic display of the pressure value(s) will stop flashing, and the TPMS Telltale Warning Light will extinguish once the updated tire pressure(s) have been received.
376 STARTING AND OPERATING will not be present, and a pressure value will be displayed instead of dashes. A system fault can occur by any of the following scenarios: 1. Jamming due to electronic devices or driving next to facilities emitting the same radio frequencies as the TPMS sensors. 2. Installing some form of aftermarket window tinting that affects radio wave signals. 3. Accumulation of excessive snow and/or ice around the wheels or wheel housings. 4. Using tire chains on the vehicle. 5.
STARTING AND OPERATING 5. Once you repair or replace the original road tire, and reinstall it on the vehicle in place of the compact spare, the TPMS will update automatically. In addition, the TPMS Telltale Warning Light will turn off and the graphic in the EVIC will display a new pressure value instead of dashes (- -), as long no tire pressure is below the low pressure warning limit in any of the four active road tires.
378 STARTING AND OPERATING gasolines, and in some circumstances may result in poorer performance. 4.0L Gasoline Engine The 4.0L engine is designed to meet all emissions regulations and provide satisfactory fuel economy and performance when using high-quality unleaded gasoline having an octane range of 87 to 89. The manufacturer recommends the use of 89 octane for optimum performance. The use of premium gasoline is not recommended.
STARTING AND OPERATING The manufacturer supports the use of reformulated gasolines. Properly blended reformulated gasolines will provide excellent performance and durability of engine and fuel system components. Gasoline/Oxygenate Blends Some fuel suppliers blend unleaded gasoline with oxygenates such as 10% ethanol, MTBE, and ETBE. Oxygenates are required in some areas of the country during the winter months to reduce carbon monoxide emissions.
380 STARTING AND OPERATING It is even more important to look for gasolines without MMT in Canada, because MMT can be used at levels higher than those allowed in the United States. MMT is prohibited in Federal and California reformulated gasolines. Materials Added to Fuel All gasoline sold in the United States is required to contain effective detergent additives. Use of additional detergents or other additives are not needed under normal conditions and would result in additional cost.
STARTING AND OPERATING • The use of fuel additives which are now being sold as octane enhancers is not recommended. Most of these products contain high concentrations of methanol. Fuel system damage or vehicle performance problems resulting from the use of such fuels or additives is not the responsibility of the manufacturer. NOTE: Intentional tampering with emissions control systems can result in civil penalties being assessed against you.
382 STARTING AND OPERATING WARNING! Carbon monoxide (CO) in exhaust gases is deadly. Follow the precautions below to prevent carbon monoxide poisoning: • Guard against carbon monoxide with proper maintenance. Have the exhaust system inspected every time the vehicle is raised. Have any abnormal conditions repaired promptly. Until repaired, drive with all side windows fully open.
STARTING AND OPERATING 383 CAUTION! WARNING! Damage to the fuel system or emission control system could result from using an improper fuel tank filler tube cap (gas cap). A poorly fitting cap could let impurities into the fuel system and may cause the Malfunction Indicator Light (MIL) to turn on due to fuel vapors escaping from the system. • Never have any smoking materials lit in or near the vehicle when the gas cap is removed or the tank filled. • Never add fuel when the engine is running.
384 STARTING AND OPERATING WARNING! A fire may result if gasoline is pumped into a portable container that is inside of a vehicle. You could be burned. Always place gas containers on the ground while filling. Loose Fuel Filler Cap Message • If the gASCAP message is displayed in the instrument cluster, this signifies a leak or change in the evaporative system is detected. Sometimes this is the result of a loosely fitting (or possibly damaged) filler cap.
STARTING AND OPERATING 385 5 E-85 Fuel Cap CAUTION! Only vehicles with the E-85 Decal and/or fuel filler door label can operate on E-85. E-85 Badge ETHANOL FUEL (E-85) E-85 is a mixture of approximately 85% fuel ethanol and 15% unleaded gasoline.
386 STARTING AND OPERATING WARNING! Ethanol vapors are extremely flammable and could cause serious personal injury. Never have any smoking materials lit in or near the vehicle when removing the fuel filler tube cap (gas cap) or filling the tank. Do not use E-85 as a cleaning agent and never use it near an open flame. Fuel Requirements Your vehicle will operate on both unleaded gasoline with an octane rating of 87, or E-85 fuel, or any mixture of these two.
STARTING AND OPERATING 387 Selection Of Engine Oil For Flexible Fuel Vehicles (FFV) E-85 and Gasoline Vehicles FFV vehicles operated on E85 require specially formulated engine oils. These special requirements are included in Mopart engine oils, and in equivalent oils meeting DaimlerChrysler Specification MS-6395. The manufacturer only recommends engine oils that are API Certified and meet the requirements of Material Standard MS-6395.
388 STARTING AND OPERATING Maintenance If you operate the vehicle using E-85 fuel, follow the maintenance schedule section of this manual. CAUTION! Do not use ethanol mixture greater than 85% in your vehicle. It will cause difficulty in cold starting and may affect driveability. VEHICLE LOADING As required by National Highway Traffic Safety Administration Regulations, your vehicle has a certification label affixed to the driver’s side door or pillar.
STARTING AND OPERATING Vehicle Certification Label Your vehicle has a Vehicle Certification Label attached to the driver’s door pillar.
390 STARTING AND OPERATING Tire Size The tire size on the Vehicle Certification Label represents the actual tire size on your vehicle. Replacement tires must be equal to the load capacity of this tire size. Rim Size This is the rim size that is appropriate for the tire size listed. Inflation Pressure This is the cold tire inflation pressure for your vehicle for all loading conditions up to full GAWR.
STARTING AND OPERATING Loading To load your vehicle properly, first figure out its empty weight, axle by axle and side by side. Store heavier items down low and be sure you distribute their weight as evenly as possible. Stow all loose items securely before driving. If weighing the loaded vehicle shows that you have exceeded either GAWR, but the total load is within the specified GVWR, you must redistribute the weight.
392 STARTING AND OPERATING A loaded vehicle is shown in the illustration. Note that neither the GVWR or the GAWR capacities have been exceeded. LOADING TABLE — EXAMPLE ONLY Front Axle Rear Axle Empty Weight 2,140 lbs 1,470 lbs (971 kg) (667 kg) Load (Driver, 360 lbs 980 lbs passengers, and (163 kg) (445 kg) cargo/luggage) TOTAL 2,500 lbs 2,450 lbs (1 134 kg) (1 111 kg) GAWR 2,544 lbs 2,544 lbs (1 154 kg) (1 154 kg) A loaded vehicle is shown in the above table.
STARTING AND OPERATING TRAILER TOWING In this section you will find safety tips and information on limits to the type of towing you can reasonably do with your vehicle. Before towing a trailer carefully review this information to tow your load as efficiently and safely as possible. To maintain warranty coverage, follow the requirements and recommendations in this manual concerning vehicles used for trailer towing.
394 STARTING AND OPERATING Gross Axle Weight Rating (GAWR) The GAWR is the maximum capacity of the front and rear axles. Distribute the load over the front and rear axles evenly. Make sure that you do not exceed either front or rear GAWR. WARNING! It is important that you do not exceed the maximum front or rear GAWR. A dangerous driving condition can result if either rating is exceeded. You could lose control of the vehicle and have an accident.
STARTING AND OPERATING Weight-Distributing Hitch A weight-distributing system works by applying leverage through spring (load) bars. They are typically used for heavier loads to distribute trailer tongue weight to the tow vehicle’s front axle and the trailer’s axle(s). When used in accordance with the manufacturers directions, it provides for a more level ride, offering more consistent steering and brake control thereby enhancing towing safety.
396 STARTING AND OPERATING Weight Distributing Hitch System Improper Adjustment of Weight Distributing System
STARTING AND OPERATING Trailer Hitch Classifications Your vehicle may be factory-equipped for safe towing of trailers weighing over 2,000 lbs (907 kg) with the optional Trailer Tow Prep Package. See an authorized dealer for package content. The following chart provides the industry standard for the maximum trailer weight a given trailer hitch class can tow and should be used to assist you in selecting the correct trailer hitch for your intended towing condition.
398 STARTING AND OPERATING Trailer Towing Weights (Maximum Trailer Weight Ratings) The Trailer Towing Weights Chart provides the maximum trailer weight ratings towable for a given drivetrain. TRAILER TOWING WEIGHTS (MAXIMUM TRAILER WEIGHT RATINGS) GCWR Engine/ Max. GTW Max. Tongue (Gross Combined Frontal Area Transaxle (Gross Trailer Wt.) Wt. Wt. Rating) Up to 2 persons & Luggage 1,800 lbs (816 kg) 180 lbs (82 kg) 3.3L, 3.8L and 7,000 lbs (3 175 kg) 22 sq ft (2.0 sq m) 4.
STARTING AND OPERATING 399 Trailer and Trailer Tongue Weight Always load a trailer with 60% to 65% of the weight in the front of the trailer. This places 10% to 15% of the Gross Trailer Weight (GTW) on the tow hitch of your vehicle. Loads balanced over the wheels or heavier in the rear can cause the trailer to severely sway side-to-side, which will cause loss of control of the vehicle and trailer. Failure to load trailers heavier in front is the cause of many trailer accidents.
400 STARTING AND OPERATING NOTE: Remember that everything put into or on the trailer adds to the load on your vehicle. Also, additional factory-installed options, or authorized dealer-installed options, must be considered as part of the total load on your vehicle. Refer to the Tire and Loading Information placard in the Tire Safety Information Section of this manual for the maximum combined weight of occupants and cargo for your vehicle.
STARTING AND OPERATING WARNING! Improper towing can lead to an injury accident. Follow these guidelines to make your trailer towing as safe as possible: Make certain that the load is secured in the trailer and will not shift during travel. When trailering cargo that is not fully secured, dynamic load shifts can occur that may be difficult for the driver to control. You could lose control of your vehicle and have an accident. • When hauling cargo or towing a trailer, do not overload your vehicle or trailer.
402 STARTING AND OPERATING 4. Trailer tongue weight rating for that trailer hitch. (This requirement may limit the ability to always achieve the 10% to 15% range of trailer tongue weight as a percentage of total trailer weight.) Towing Requirements — Tires • Do not attempt to tow a trailer while using a compact spare tire. • Proper tire inflation pressures are essential to the safe and satisfactory operation of your vehicle.
STARTING AND OPERATING • Trailer brakes are recommended for trailers over 1,000 lbs (454 kg) and required for trailers in excess of 2,000 lbs (907 kg). CAUTION! If the trailer weighs more than 1,000 lbs (454 kg) loaded, it should have its own brakes and they should be of adequate capacity. Failure to do this could lead to accelerated brake lining wear, higher brake pedal effort, and longer stopping distances. 403 WARNING! Do not connect trailer brakes to your vehicle’s hydraulic brake lines.
404 STARTING AND OPERATING Towing Requirements — Trailer Lights and Wiring Whenever you pull a trailer, regardless of the trailer size, stop lights and turn signals on the trailer are required for motoring safety. The Trailer Tow Package may include a four-pin or a seven-pin wiring harness. Use a factory approved trailer harness and connector. NOTE: Do not cut or splice wiring into the vehicles wiring harness.
STARTING AND OPERATING 405 Towing Tips — Automatic Transmission The DRIVE gear can be selected when towing. However, if frequent shifting occurs while in DRIVE, move the gear selector lever into third gear (with four-speed transmission) or fifth gear (with six-speed transmission). Seven-Pin Connector Towing Tips Before setting out on a trip, practice turning, stopping and backing the trailer in an area away from heavy traffic.
406 STARTING AND OPERATING NOTE: • Check the automatic transmission fluid level before towing. Towing Tips — Cooling System To reduce potential for engine and transmission overheating, take the following actions: • The six-speed automatic transmission is sealed and requires an authorized dealer service center to check the transmission fluid. • City Driving When stopped for short periods of time, put transmission gear selector lever in NEUTRAL but do not increase engine idle speed.
STARTING AND OPERATING RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.) 407 NOTE: If the vehicle requires towing make sure all four wheels are off the ground. CAUTION! Towing this vehicle behind another vehicle (flattowing with all four wheels on the ground) IS NOT RECOMMENDED.
WHAT TO DO IN EMERGENCIES CONTENTS m Hazard Warning Flasher . . . . . . . . . . . . . . . . . . 410 m Jump-Starting Procedure . . . . . . . . . . . . . . . . . . 425 m If Your Engine Overheats . . . . . . . . . . . . . . . . . 410 m Freeing A Stuck Vehicle . . . . . . . . . . . . . . . . . . 427 m Jacking And Tire Changing . . . . . . . . . . . . . . . . 412 m Towing A Disabled Vehicle . . . . . . . . . . . . . . . . 428 ▫ Jack Location . . . . . . . . . . . . . . . . . . . . . . . .
410 WHAT TO DO IN EMERGENCIES HAZARD WARNING FLASHER The hazard flasher switch is located in the center of the instrument panel below the radio. To engage the Hazard Warning Flashers, depress the switch on the instrument panel. When the Hazard Warning Switch is activated, all directional turn signals will flash on and off to warn oncoming traffic of an emergency. Push the switch a second time to turn off the flashers.
WHAT TO DO IN EMERGENCIES the fan control to High. This allows the heater core to act as a supplement to the radiator and aids in removing heat from the engine cooling system. CAUTION! Driving with a hot cooling system could damage your vehicle. If temperature gauge reads “H”, pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until the pointer drops back into the normal range. If the pointer remains on the “H”, turn the engine off immediately, and call for service.
412 WHAT TO DO IN EMERGENCIES JACKING AND TIRE CHANGING WARNING! • Getting under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. You could be crushed. Never get any part of your body under a vehicle that is on a jack. If you need to get under a raised vehicle, take it to a service center where it can be raised on a lift. • The jack is designed to use as a tool for changing tires only. The jack should not be used to lift the vehicle for service purposes.
WHAT TO DO IN EMERGENCIES 413 Jack Location The jack, jack handle and winch handle tools are stowed behind the rear left side trim panel in the rear cargo area. Turn the two cover latches to release the cover. 6 Rear Compartment Features 1 2 3 4 - Tie Down Switch Bank Tire Jack/Handle Cubby/Speaker 5 6 7 8 - Liftgate Close Switch Bag Holders Child Seat LATCH Anchor Rechargeable Flash Light Remove the pouch containing the scissors jack, jack handle, and tools.
414 WHAT TO DO IN EMERGENCIES Spare Tire Removal For vehicles equipped with Stow ’n Go seating, the spare tire is stowed inside a protective cover located under the center of the vehicle by means of a cable winch mechanism. The “spare tire drive” nut is located on the floor, under a plastic cap at the front of the floor console. NOTE: The base console, if equipped, must be removed to raise and lower the spare tire. Refer to “Console Features” in Section 3, for the console removal procedure.
WHAT TO DO IN EMERGENCIES Preparations For Jacking Park the vehicle on a firm level surface, avoid ice or slippery areas, set the parking brake and place the gear selector in PARK. Turn OFF the ignition. 415 Jacking Instructions • Turn on the Hazard Warning Flasher. • Block both the front and rear of the wheel diagonally opposite the jacking position. For example, if changing the right front tire, block the left rear wheel. • Passengers should not remain in the vehicle when the vehicle is being jacked.
416 WHAT TO DO IN EMERGENCIES WARNING! WARNING! Carefully follow these tire changing warnings to help prevent personal injury or damage to your vehicle: Carefully follow these tire changing warnings to help prevent personal injury or damage to your vehicle: • Always park on a firm, level surface as far from the edge of the roadway as possible before raising the vehicle. • Do not let anyone sit in the vehicle when it is on a jack. • Block the wheel diagonally opposite the wheel to be raised.
WHAT TO DO IN EMERGENCIES 1. Loosen (but do not remove) the wheel lug nuts by turning them to the left one turn while the wheel is still on the ground. 2. To remove the compact spare tire/cover assembly, assemble the winch handle extensions to form a “T’ and fit the winch “T” handle over the drive nut. Rotate the nut to the left until the winch mechanism stops turning freely. This will allow enough slack in the cable to allow you to pull the spare tire out from under the vehicle.
418 WHAT TO DO IN EMERGENCIES NOTE: If either front tire is flat, it may be necessary to jack up the vehicle to remove the compact spare tire/ cover assembly from under the vehicle. Refer to jack engagement locations in the following steps for proper jack placement. 4. When the compact spare tire/cover assembly is clear of the vehicle, stand the tire/cover assembly upright and remove the wheel spacer by squeezing the two retaining tabs together.
WHAT TO DO IN EMERGENCIES 5. There are two jack engagement locations on each side of the vehicle body. These locations are on the sill flange of the vehicle body. 419 NOTE: Rear jack location is between a pair of downstanding tabs on the sill flange of the vehicle body. Front jack location is on the sill flange of the vehicle body and aligns with the front door edge.
420 WHAT TO DO IN EMERGENCIES Jack Location
WHAT TO DO IN EMERGENCIES 421 CAUTION! WARNING! Do not attempt to raise the vehicle by jacking on locations other than those indicated in Step 5. Raising the vehicle higher than necessary can make the vehicle less stable. It could slip off the jack and hurt someone near it. Raise the vehicle only enough to remove the tire. 6. Place the wrench on the jack screw and turn to the right until the jack head is properly engaged in the described location.
422 WHAT TO DO IN EMERGENCIES 10. Lower the vehicle by turning the jack screw to the left. 11. Finish tightening the lug nuts. Push down on the wrench while tightening for increased leverage. Alternate lug nuts until each nut has been tightened twice. Correct wheel nut tightness is 95 ft lbs (130 N·m). If in doubt about the correct tightness, have them checked with a torque wrench by your authorized dealer or at a service station. 12. Lower the jack to its fully-closed position. 13.
WHAT TO DO IN EMERGENCIES of operation, and after each time a tire is changed, to allow the wheel nuts to become properly set. All nuts should first be firmly seated against the wheel. The nuts should then be tightened to recommended torque. Tighten the nuts to final torque in increments. Progress around the bolt circle, tightening the nut opposite to the nut just previously tightened until final torque is achieved. Recommended torque is 95 ft lbs (130 N·m).
424 WHAT TO DO IN EMERGENCIES 2. Assemble the winch handle extensions to form the Spare Tire Hook and pull the wheel spacer from under the vehicle. 3. Turn the compact spare tire so that the valve stem is down and place the tire into the spare tire cover assembly. Slide the wheel spacer through the center of the wheel and spare tire cover assembly so that the two retainer tabs snap out and engage the spare tire cover on the opposite side.
WHAT TO DO IN EMERGENCIES CAUTION! For vehicles equipped with Stow ’n Go seating, the Winch Mechanism is designed specifically to stow a COMPACT Spare Tire ONLY. Do not attempt to use the Winch to stow the Full Size ’Flat’ Tire, or any other Full Size Tire. Vehicle damage may result. 425 JUMP-STARTING PROCEDURE WARNING! • DO NOT attempt to push or tow the vehicle to get it started. Vehicles equipped with an automatic transmission cannot be started this way.
426 WHAT TO DO IN EMERGENCIES When jump-starting, proceed as follows: 1. Wear eye protection and remove any metal jewelry such as watch bands or bracelets that might make an inadvertent electrical contact. WARNING! DO NOT permit vehicles to touch each other as this could establish a ground connection and personal injury could result. 2. When a boost is provided by a battery in another vehicle, park that vehicle within booster cable reach and without letting the vehicles touch.
WHAT TO DO IN EMERGENCIES 6. Start the engine in the vehicle which has the booster battery, let the engine idle a few minutes, then start the engine in the vehicle with the discharged battery. 7. When removing the jumper cables, reverse the above sequence exactly. Be careful of the moving belts and fan.
428 WHAT TO DO IN EMERGENCIES CAUTION! CAUTION! Racing the engine or spinning the wheels too fast may lead to transmission overheating and failure. It can also damage the tires. Do not spin the wheels above 35 mph (55 km/h). • Do not attempt to tow this vehicle from the front with sling type towing equipment. Damage to the front fascia will result.
WHAT TO DO IN EMERGENCIES CAUTION! • Do not push or tow this vehicle with another vehicle as damage to the bumper fascia and transmission may result. • If the vehicle being towed requires steering, the ignition switch must be in the OFF position, not in the LOCK or ACC positions. If it is necessary to use the accessories while being towed (wipers, defrosters, etc.), the key must be in the ON position, not the ACC position. Make certain the transmission remains in NEUTRAL.
MAINTAINING YOUR VEHICLE CONTENTS m 3.3L Engine Compartment . . . . . . . . . . . . . . . . 434 m Maintenance Procedures . . . . . . . . . . . . . . . . . . 441 m 3.8L Engine Compartment . . . . . . . . . . . . . . . . 435 ▫ Engine Oil . . . . . . . . . . . . . . . . . . . . . . . . . . 441 m 4.0L Engine Compartment . . . . . . . . . . . . . . . . 436 ▫ Engine Oil Filter . . . . . . . . . . . . . . . . . . . . . . 444 m Onboard Diagnostic System — OBD II . . . . . . . . 437 ▫ Drive Belt . . . . . . .
432 MAINTAINING YOUR VEHICLE ▫ Power Steering — Fluid Check . . . . . . . . . . . . 452 ▫ Front Suspension — Ball Joints . . . . . . . . . . . . 453 ▫ Steering Shaft Seal . . . . . . . . . . . . . . . . . . . . 453 ▫ Drive Shaft Universal Joints . . . . . . . . . . . . . . 454 ▫ Body Lubrication . . . . . . . . . . . . . . . . . . . . . 454 ▫ Windshield Wiper Blades . . . . . . . . . . . . . . . . 454 ▫ Cooling System . . . . . . . . . . . . . . . . . . . . . . . 456 ▫ Hoses And Vacuum/Vapor Harnesses . .
MAINTAINING YOUR VEHICLE 433 ▫ Center High-Mounted Stop Light (CHMSL) . . . 485 m Fluids, Lubricants And Genuine Parts . . . . . . . . 487 ▫ License Light . . . . . . . . . . . . . . . . . . . . . . . . 485 ▫ Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 487 m Fluids And Capacities . . . . . . . . . . . . . . . . . . . 486 ▫ Chassis . . . . . . . . . . . . . . . . . . . . . . . . . . . .
434 MAINTAINING YOUR VEHICLE 3.
MAINTAINING YOUR VEHICLE 435 3.
436 MAINTAINING YOUR VEHICLE 4.
MAINTAINING YOUR VEHICLE ONBOARD DIAGNOSTIC SYSTEM — OBD II Your vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems. When these systems are operating properly, your vehicle will provide excellent performance and fuel economy, as well as engine emissions well within current government regulations.
438 MAINTAINING YOUR VEHICLE Loose Fuel Filler Cap Message — gASCAP Should the “Loose Fuel Filler Cap” or “gASCAP” message appear, there may be a problem in the evaporative system. Before taking the vehicle into an authorized dealer, check first to see if the fuel filler cap is possibly loose, improperly installed, or damaged. A loose fuel filler cap message will be displayed in the instrument cluster. Tighten the gas cap until a 9clicking9 sound is heard.
MAINTAINING YOUR VEHICLE This vehicle has a simple ignition key-actuated test, which you can use prior to going to the test station. To check if this vehicle’s OBD II system is ready, you must do the following: 1. Insert the ignition key into the ignition switch. 2. Turn the ignition to the ON position, but do not crank or start the engine. 3. If you crank or start the engine, you will have to start this test over. 4.
440 MAINTAINING YOUR VEHICLE serviced before going to the I/M station. The I/M station can fail the vehicle because the MIL is on with the engine running. NOTE: Intentional tampering with emissions control systems can result in civil penalties being assessed against you. REPLACEMENT PARTS Use of genuine Mopart parts for normal/scheduled maintenance and repairs is highly recommended to ensure the designed performance.
MAINTAINING YOUR VEHICLE MAINTENANCE PROCEDURES The pages that follow contain the required maintenance services determined by the engineers who designed your vehicle. Besides the maintenance items for which there are fixed maintenance intervals, there are other items that should operate satisfactorily without periodic maintenance. However, if a malfunction of these items does occur, it could adversely affect the engine or vehicle performance.
442 MAINTAINING YOUR VEHICLE Checking the oil while the vehicle is on level ground will improve the accuracy of the oil level readings. Maintain the oil level between the MIN and MAX markings on the dipstick. Adding one quart of oil when the reading is at the MIN mark will result in a MAX reading on these engines. CAUTION! Overfilling or underfilling will cause oil aeration or loss of oil pressure. This could damage your engine.
MAINTAINING YOUR VEHICLE 443 recommends engine oils that are API certified and meet the requirements of DaimlerChrysler Material Standard MS-6395. starting and vehicle fuel economy. Your engine oil filler cap also shows the recommended engine oil viscosity for your vehicle. American Petroleum Institute (API) Engine Oil Identification Symbol This symbol means that the oil has been certified by the American Petroleum Institute (API). The manufacturer only recommends API Certified engine oils.
444 MAINTAINING YOUR VEHICLE Synthetic Engine Oils You may use synthetic engine oils provided the recommended oil quality requirements are met, and the recommended maintenance intervals for oil and filter changes are followed. Materials Added to Engine Oil The manufacture strongly recommends against the addition of any additives (other than leak detection dyes) to the engine oil. Engine oil is an engineered product and its performance may be impaired by supplemental additives.
MAINTAINING YOUR VEHICLE DRIVE BELT At the mileage indicated in the maintenance schedule, replace the drive belt with a new drive belt. NOTE: The drive belt must be routed correctly to ensure proper drive function. SPARK PLUGS Spark plugs must fire properly to assure engine performance and emission control. New plugs should be installed at the specified mileage. The entire set should be replaced if there is any malfunction due to a faulty spark plug.
446 MAINTAINING YOUR VEHICLE CATALYTIC CONVERTER The catalytic converter requires the use of unleaded fuel only. Leaded gasoline will destroy the effectiveness of the catalyst as an emission control device. Under normal operating conditions, the catalytic converter will not require maintenance. However, it is important to keep the engine properly tuned to assure proper catalyst operation and prevent possible catalyst damage.
MAINTAINING YOUR VEHICLE WARNING! A hot exhaust system can start a fire if you park over materials that can burn. Such materials might be grass or leaves coming into contact with your exhaust system. Do not park or operate your vehicle in areas where your exhaust system can contact anything that can burn. In unusual situations involving grossly malfunctioning engine operation, a scorching odor may indicate severe and abnormal catalyst overheating.
448 MAINTAINING YOUR VEHICLE Whenever a change is noticed in the sound of the exhaust system, when exhaust fumes can be detected inside the vehicle, or when the underside or rear of the vehicle is damaged, have a competent mechanic inspect the complete exhaust system and adjacent body areas for broken, damaged, deteriorated, or mispositioned parts. Open seams or loose connections could permit exhaust fumes to seep into the passenger compartment.
MAINTAINING YOUR VEHICLE 449 WARNING! CAUTION! • Battery fluid is a corrosive acid solution and can burn or even blind you. Don’t allow battery fluid to contact your eyes, skin or clothing. Don’t lean over a battery when attaching clamps. If acid splashes in eyes or on skin, flush the area immediately with large amounts of water. • It is essential when replacing the cables on the battery that the positive cable is attached to the positive post and the negative cable is attached to the negative post.
450 MAINTAINING YOUR VEHICLE AIR CONDITIONER MAINTENANCE For best possible performance, your air conditioner should be checked and serviced by an authorized dealer at the start of each warm season. This service should include cleaning of the condenser fins and a system performance check. Drive belt tension should also be checked at this time. WARNING! • Use only refrigerants and compressor lubricants approved by the manufacturer for your air conditioning system.
MAINTAINING YOUR VEHICLE Refrigerant Recovery And Recycling R-134a Air Conditioning Refrigerant is a hydrofluorocarbon (HFC) that is endorsed by the Environmental Protection Agency and is an ozone-saving product. However, the manufacturer recommends that air conditioning service be performed by an authorized dealer or other an authorized service facility using recovery and recycling equipment.
452 MAINTAINING YOUR VEHICLE 4. Disengage the two retaining tabs that secure the filter cover to the HVAC housing and remove the cover. 6. Install the A/C Air Filter with the arrow on the filter pointing toward the floor. When installing the filter cover, make sure the retaining tabs fully engage the cover. CAUTION! The A/C Air Filter is labeled with an arrow to indicate airflow direction through the filter. Failure to properly install the filter will result in the need to replace it more often. 7.
MAINTAINING YOUR VEHICLE apparent, and/or the system is not functioning as anticipated. Coordinate inspection efforts through an authorized DaimlerChrysler Dealership.9 WARNING! Fluid level should be checked on a level surface and with the engine off to prevent injury from moving parts and to ensure accurate fluid level reading. Do not overfill. Use only manufacturer’s recommended power steering fluid. If necessary, add fluid to restore to the proper indicated level.
454 MAINTAINING YOUR VEHICLE DRIVE SHAFT UNIVERSAL JOINTS Your vehicle has constant velocity universal joints. Periodic lubrication of these joints is not required. However, the joint boots should be inspected for external leakage or damage when other maintenance is performed. If leakage or damage is evident, the universal joint boot and grease should be replaced immediately. Continued operation could result in failure of the universal joint due to water and dirt contamination of the grease.
MAINTAINING YOUR VEHICLE Avoid using the wiper blades to remove frost or ice from the windshield. Keep the blade rubber out of contact with petroleum products such as engine oil, gasoline, etc. Windshield and Rear Window Washers The fluid reservoir for the windshield washers and the rear window washer is shared. It is located in the engine compartment and should be checked for fluid level at regular intervals.
456 MAINTAINING YOUR VEHICLE COOLING SYSTEM WARNING! • When working near the radiator cooling fan, disconnect the fan motor lead or turn the ignition switch to the OFF position. The fan is temperature controlled and can start at anytime the ignition switch is in the ON position. • You or others can be badly burned by hot coolant or steam from your radiator. If you see or hear steam coming from under the hood, don’t open the hood until the radiator has had time to cool.
MAINTAINING YOUR VEHICLE drain from the coolant recovery bottle. DO NOT REMOVE THE COOLANT PRESSURE CAP WHEN THE COOLING SYSTEM IS HOT. Cooling System — Drain, Flush and Refill The system should be drained, flushed, and refilled at the intervals shown in the “Maintenance Schedule” in Section 8 of this manual. If the solution is dirty or contains a considerable amount of sediment, clean and flush with a reliable cooling system cleaner. Follow with a thorough rinsing to remove all deposits and chemicals.
458 MAINTAINING YOUR VEHICLE Adding Coolant Your vehicle has been built with an improved engine coolant that allows extended maintenance intervals. This coolant can be used up to five years or 102,000 mi (170 000 km) before replacement. To prevent reducing this extended maintenance period, it is important that you use the same coolant throughout the life of your vehicle. Please review these recommendations for using Hybrid Organic Additive Technology (HOAT) coolant.
MAINTAINING YOUR VEHICLE WARNING! • The warning words “DO NOT OPEN HOT” on the cooling system pressure cap are a safety precaution. Never add coolant when the engine is overheated. Do not loosen or remove the cap to cool an overheated engine. Heat causes pressure to build up in the cooling system. To prevent scalding or injury, do not remove the pressure cap while the system is hot or under pressure. • Do not use a pressure cap other than the one specified for your vehicle.
460 MAINTAINING YOUR VEHICLE When additional coolant is needed to maintain the proper level, it should be added to the coolant bottle. Do not overfill. Points To Remember NOTE: When the vehicle is stopped after a few miles (a few kilometers) of operation, you may observe vapor coming from the front of the engine compartment.
MAINTAINING YOUR VEHICLE • Do not change the thermostat for summer or winter operation. If replacement is ever necessary, install ONLY the correct type thermostat. Other designs may result in unsatisfactory coolant performance, poor gas mileage, and increased emissions. HOSES AND VACUUM/VAPOR HARNESSES Inspect surfaces of hoses and nylon tubing for evidence of heat and mechanical damage.
462 MAINTAINING YOUR VEHICLE BRAKES In order to assure brake system performance, all brake system components should be inspected periodically. Suggested service intervals can be found in the Maintenance Schedules. WARNING! Riding the brakes can lead to brake failure and possibly an accident. Driving with your foot resting or riding on the brake pedal can result in abnormally high brake temperatures, excessive lining wear, and possible brake damage.
MAINTAINING YOUR VEHICLE 463 NOTE: Inspection of brake hoses should be performed whenever the brake system is serviced and every engine oil change. Inspect hydraulic brake hoses for surface cracking, scuffing, or worn spots. If there is any evidence of cracking, scuffing, or worn spots, the hose should be replaced immediately! Eventual deterioration of the hose can take place resulting in a possibility of a burst failure.
464 MAINTAINING YOUR VEHICLE WARNING! CAUTION! • Overfilling the brake fluid reservoir can result in spilling brake fluid on hot engine parts and the brake fluid catching fire. Do not allow petroleum base fluid to contaminate the brake fluid — all brake seal components could be damaged causing partial or complete brake failure.
MAINTAINING YOUR VEHICLE All six speed transaxles are equipped with a capped dipstick tube, it is sealed and should not be tampered with. Your authorized dealer has the necessary tools to ensure that the fluid level is set properly. Selection of Lubricant It is important that the proper lubricant is used in the transaxle to assure optimum transaxle performance. Use only manufacturer’s recommended transaxle fluid; refer to Fluids, Lubricants and Genuine Parts for correct fluid type.
466 MAINTAINING YOUR VEHICLE Fluid Level Check — 3.3L Engine with Four-Speed Automatic Transaxle — If Equipped The dipstick is located just behind the radiator, lower right side. 4 Speed ATX Diptstick To properly check the automatic transaxle fluid level, the following procedure must be used: 1. The vehicle must be on level ground. 2. The engine should be running at curb idle speed for a minimum of 60 seconds. 3. Fully apply parking brake. 4.
MAINTAINING YOUR VEHICLE If the fluid level indicates low, add sufficient fluid to bring to the proper level. CAUTION! Do not overfill. Dirt and water in the transaxle can cause serious damage. To prevent dirt and water from entering the transaxle after checking or replenishing fluid, make certain that the dipstick cap is reseated properly. Fluid and Filter Changes Refer to the “Maintenance Schedule” in Section 8 of this manual for the recommended transaxle fluid and filter change intervals.
468 MAINTAINING YOUR VEHICLE trees and road surfaces during other seasons, are highly corrosive to the metal in your vehicle. Outside parking, which exposes your vehicle to airborne contaminants, road surfaces on which the vehicle is operated, extreme hot or cold weather and other extreme conditions will have an adverse effect on paint, metal trim, and underbody protection.
MAINTAINING YOUR VEHICLE • Avoid using abrasive compounds and power buffing that may diminish the gloss or thin out the paint finish. CAUTION! Do not use abrasive or strong cleaning materials such as steel wool or scouring powder, which will scratch metal and painted surfaces. Special Care • If you drive on salted or dusty roads or if you drive near the ocean, hose off the undercarriage at least once a month.
470 MAINTAINING YOUR VEHICLE Wheel and Wheel Trim Care All wheels and wheel trim, especially aluminum and chrome-plated wheels should be cleaned regularly with a mild soap and water to prevent corrosion. To remove heavy soil and/or excessive brake dust, use Mopart Wheel Cleaner (05066247AB) or equivalent or select a nonabrasive, non-acidic cleaner. Do not use scouring pads, steel wool, a bristle brush, or metal polishes. Only Mopart or equivalent is recommended. Do not use oven cleaner.
MAINTAINING YOUR VEHICLE soaking your leather upholstery with any liquid. Please do not use polishes, oils, cleaning fluids, solvents, detergents, or ammonia-based cleaners to clean your leather upholstery. Application of a leather conditioner is not required to maintain the original condition. WARNING! Do not use volatile solvents for cleaning purposes. Many are potentially flammable, and if used in closed areas they may cause respiratory harm.
472 MAINTAINING YOUR VEHICLE 2. To maintain the high gloss shine, apply a scratch and swirl remover onto a damp cloth and apply to door applique. Rub the applique with a firm pressure then buff lightly with a clean cotton cloth until a high gloss shine is achieved. Cleaning Headlights Your vehicle has plastic headlights that are lightweight and less susceptible to stone breakage than glass headlights.
MAINTAINING YOUR VEHICLE 1. Clean with a wet soft rag. A mild soap solution may be used, but do not use high alcohol content or abrasive cleaners. If soap is used, wipe clean with a clean damp rag. 2. Dry with a soft tissue. Seat Belt Maintenance Do not bleach, dye or clean the seatbelts with chemical solvents or abrasive cleaners. This will weaken the fabric. Sun damage can also weaken the fabric. If the seat belts need cleaning, use a mild soap solution or lukewarm water.
474 MAINTAINING YOUR VEHICLE Installation Place the liner into the cupholder drawer and press the liner into place so that the retention tabs seat into the corresponding openings in the drawer. FUSES/TOTALLY INTEGRATED POWER MODULE (TIPM) The Totally Integrated Power Module (TIPM) is located in the engine compartment near the battery. This center contains cartridge fuses and mini fuses. A label that identifies each component may be printed or embossed on the inside of the cover.
MAINTAINING YOUR VEHICLE Cavity J1 J2 J3 J4 J5 J6 J7 J8 J9 Cartridge Fuse 40 Amp Green 30 Amp Pink 40 Amp Green 25 Amp Natural 25 Amp Natural 40 Amp Green 30 Amp Pink 40 Amp Green 40 Amp Green FUSES/TIPM Mini Description Fuse — Power Folding Seat J10 — Power Liftgate Module J11 — J13 — Rear Door Module (RR Door Node) Driver Door Node — Passenger Door Node J15 — Anti-Lock Brake System (ABS) Pump/ESP Anti-Lock Brake System (ABS) Valve Power Memory Seat (If Equipped) PZEV Motor/Flex Fuel J17
476 MAINTAINING YOUR VEHICLE Cavity J21 J22 M1 M2 M3 M4 M5 M6 FUSES/TIPM Cartridge Mini Description Fuse Fuse 20 Amp — Front/Rear Washer Yellow 25 Amp — Sunroof Module Natural — 15 Amp Center High Mounted Blue Stop Light (CHMSL)/ Brake Switch — 20 Amp Trailer Lighting Yellow — 20 Amp — Yellow — 10 Amp Trailer Tow Red — 25 Amp Inverter Natural — 20 Amp — Yellow Cavity M7 M8 M9 M10 M11 FUSES/TIPM Cartridge Mini Description Fuse Fuse — 20 Amp Power Outlet #2 (BATT/ Yellow ACC SELECT) — 20 Amp Front Heate
MAINTAINING YOUR VEHICLE Cavity M12 M13 M14 FUSES/TIPM Cartridge Mini Description Fuse Fuse — 30 Amp Amplifier (AMP) Green — 20 Amp Ignition Off Draw— Yellow Cabin Compartment Node (IOD-CCN), Wireless Control Module (WCM), SIREN, Clock Module (CLK MOD), Multi-Function Control Switch (MULTIFCTN SW) — 20 Amp Trailer Tow (Export Yellow Only) Cavity M15 M16 477 FUSES/TIPM Cartridge Mini Description Fuse Fuse — 20 Amp COL MOD, IR SNS, Yellow Heater Ventilation, Air Conditioning/Automatic Temperature Contr
478 MAINTAINING YOUR VEHICLE Cavity M17 M18 M19 M20 M21 M22 FUSES/TIPM Cartridge Mini Description Fuse Fuse — 15 Amp Left Tail/License/Park Blue Lamp (LT-TAIL/LIC/ PRK LMP) — 15 Amp Right Tail/Park/Run Blue Lamp (RT-TAIL/PRK/ RUN LMP) — 25 Amp Auto Shut Down (ASD Natural #1 and #2) — 15 Amp Cabin Compartment Blue Node Interior Light (CCN INT LIGHT), Switch Bank (SW BANK), Steering Control Module (SCM) — 20 Amp Auto Shut Down (ASD Yellow #3) — 10 Amp Right Horn (RT HORN Red (HI/LOW) Cavity M23 M24 M25
MAINTAINING YOUR VEHICLE Cavity M29 M30 M31 M32 M33 FUSES/TIPM Cartridge Mini Description Fuse Fuse — 10 Amp Occupant Classification Red Module (OCM) — 15 Amp Rear Wiper Module (RR Blue WIPER MOD), Power Folding Mirror (PWR FOLD MIR) — 20 Amp Back-Up Lamps (B/U Yellow LAMPS) — 10 Amp Occupant Restraint ConRed troller (ORC), TT EUROPE — 10 Amp Next Generation ControlRed ler (NGC), Global Powertrain Engine Controller (GPEC) Cavity M34 M35 M36 M37 479 FUSES/TIPM Cartridge Mini Description Fuse Fuse — 10
480 MAINTAINING YOUR VEHICLE Cavity M38 FUSES/TIPM Cartridge Mini Description Fuse Fuse — 25 Amp Lock/Unlock Motors Natural (LOCK/UNLOCK MTRS) CAUTION! • When installing the Integrated Power Module cover, it is important to ensure the cover is properly positioned and fully latched. Failure to do so may allow water to get into the Integrated Power Module, and possibly result in a electrical system failure.
MAINTAINING YOUR VEHICLE The Heated Mirrors, Lower Instrument Panel Power Outlet and Removable Floor Console, when in the front position are fused with self-resetting fuses that are only serviceable by an authorized dealer. The power seats are fused by a 30 Amp circuit breaker located under the driver’s seat. The Power Windows are fused by a 25 Amp circuit breaker located under the instrument panel near the steering column.
482 MAINTAINING YOUR VEHICLE NOTE: For lighted switches, see your dealer for replacement. All of the interior bulbs are glass wedge base or glass cartridge types. Aluminum base bulbs are not approved and should not be used for replacement. LIGHT BULBS — Exterior Bulb Number Backup, Tail, Stop Light . . . . . . . . . . . . . . . . . . . 3157 Center High-Mounted Stop Light . . . LED (See Note 1) Fog Light — If Equipped . . . . . . . . . . . . . . . . . . 9145 Front Side Marker, Park/Turn Signal. . . . . . .
MAINTAINING YOUR VEHICLE 5. Connect the wiring connector to bulb and slide red lock tab forward. Front Park/Turn Signal and Side Marker Lights 1. Raise the hood to access the rear of the headlight housing. 2. Twist the turn signal socket and remove from the headlight housing, then pull the bulb out. 3. Push the new bulb into the socket and reinstall the socket by twisting until locked into the headlight housing. Fog Lights NOTE: Access to the fog light bulb is from the rear of the fascia.
484 MAINTAINING YOUR VEHICLE Rear Tail, Stop, Turn Signal, Side Marker and Backup Lights 1. Raise the liftgate. 2. Remove the tail light assembly by removing the two screws from the inboard side. Use a fiber stick or similar tool to gently pry the light on the outboard side to disengage the two ball studs. Removing Tail Light Assembly NOTE: • If a screwdriver is used, make sure a soft material is placed between the vehicle body and tool so not to scratch the paint.
MAINTAINING YOUR VEHICLE 485 Center High-Mounted Stop Light (CHMSL) The CHMSL uses LED lights that are not serviceable separately. The CHMSL must be replaced as an assembly, see your authorized Dealer. License Light The light for the license plate light is located under the tailgate light bar and above the license plate. 1. Using a small screwdriver, press inward the locking tab on the outboard side of the light assembly and pull down on the light assembly for removal.
486 MAINTAINING YOUR VEHICLE FLUIDS AND CAPACITIES FLUIDS AND CAPACITIES U.S. Metric Fuel (approximate) All Engines 20 Gals 76 L Engine Oil with Filter 3.3L and 3.8L (SAE 5W-20 API Certified) 5.0 Qts 4.7 L 4.0L (SAE 10W-30 API Certified) 5.5 Qts 5.2 L Cooling System 3 3.3L, 3.8L and 4.0L (Use Mopart Antifreeze/Coolant Five Year/ 13.4 Qts 12.6 L 100,000 Mile Formula or equivalent.) 3 Includes heater and coolant recovery bottle filled to MAX level. Add 2.9 Qts (2.
MAINTAINING YOUR VEHICLE 487 FLUIDS, LUBRICANTS AND GENUINE PARTS Engine FLUIDS, LUBRICANTS AND GENUINE PARTS — ENGINE Component Fluids, Lubricants and Genuine Parts Coolant Mopart Antifreeze/Coolant Five Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) or equivalent Oil – 3.3L, 3.8L Use API Certified SAE 5W-20 engine oil. Refer to your oil filler cap for correct SAE grade, meeting DaimlerChrysler Material Standard MS-6395. Oil – 4.0L Use API Certified SAE 10W-30 engine oil.
488 MAINTAINING YOUR VEHICLE Chassis FLUIDS, LUBRICANTS AND GENUINE PARTS — CHASSIS Component Fluids, Lubricants and Genuine Parts Automatic Transmission Mopart ATF+4 Automatic Transmission Fluid Brake Master Cylinder Mopart DOT 3 and SAE J1703 should be used or equivalent. If DOT 3 brake fluid is not available, then DOT 4 is acceptable. Use only recommended brake fluids.
MAINTENANCE SCHEDULES CONTENTS m Emissions Control System Maintenance . . . . . . . 490 m Maintenance Schedule . . . . . . . . . . . . . . . . . . . 490 ▫ Required Maintenance Intervals . . . . . . . . . . .
M A I N T E N A N C E 490 MAINTENANCE SCHEDULES EMISSIONS CONTROL SYSTEM MAINTENANCE The Scheduled Maintenance services listed in bold type, must be done at the times or mileages specified to ensure the continued proper functioning of the Emissions Control System. These, and all other maintenance services included in this manual, should be done to provide best vehicle performance and reliability.
MAINTENANCE SCHEDULES NOTE: • The oil change indicator message will not monitor the time since the last oil change. Change your vehicle’s oil if it has been six months since your last oil change even if the oil change indicator message is NOT illuminated. • Change your engine oil more often if you drive your vehicle off-road for an extended period of time. • Under no circumstances should oil change intervals exceed 6,000 mi (10 000 km) or six months, whichever comes first.
M 492 MAINTENANCE SCHEDULES A I • Check the fluid levels of coolant reservoir, brake N master cylinder, power steering and transmission and T E add as needed. N A • Check all lights and other electrical items for correct N operation. C E S C H E D U L E S 8 At Each Oil Change • Change the engine oil filter. • Inspect the brake hoses and lines. CAUTION! Failure to perform the required maintenance items may result in damage to the vehicle.
MAINTENANCE SCHEDULES 493 M Required Maintenance Intervals Perform Maintenance Every (Where time and mileage are listed, follow the interval that occurs first.) Maintenance Items Change the engine oil and engine oil filter. Rotate Tires. If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter, replace if necessary. Inspect the brake linings, replace if necessary. Replace the air conditioning filter. Inspect the CV Joints.
M 494 MAINTENANCE SCHEDULES A I N T E N Maintenance Items A N Change the automatic transmission fluid & filter if C using your vehicle for any of the following: police, E taxi, fleet or frequent trailer towing. S C H E D U L E S 8 Perform Maintenance Every (Where time and mileage are listed, follow the interval that occurs first.) Inspect and replace PCV valve if necessary. † Flush and replace the engine coolant. Replace the ignition cables on 3.3L, 3.8L engines. Replace the spark plugs on 3.3L, 3.8L, 4.
MAINTENANCE SCHEDULES WARNING! You can be badly injured working on or around a motor vehicle. Do only that service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent mechanic.
IF YOU NEED CONSUMER ASSISTANCE CONTENTS m Suggestions For Obtaining Service For Your Vehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 499 ▫ Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) . . . . . . . . . . . . . 501 ▫ Prepare For The Appointment . . . . . . . . . . . . 499 ▫ Service Contract . . . . . . . . . . . . . . . . . . . . . . 501 ▫ Prepare A List . . . . . . . . . . . . . . . . . . . . . . . . 499 m Warranty Information (U.S. Vehicles Only) . . . . .
498 IF YOU NEED CONSUMER ASSISTANCE m Department Of Transportation Uniform Tire Quality Grades . . . . . . . . . . . . . . . . . . . . . . . . 505 ▫ Treadwear . . . . . . . . . . . . . . . . . . . . . . . . . . 505 ▫ Traction Grades . . . . . . . . . . . . . . . . . . . . . . 505 ▫ Temperature Grades . . . . . . . . . . . . . . . . . . .
IF YOU NEED CONSUMER ASSISTANCE SUGGESTIONS FOR OBTAINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you’re having warranty work done, be sure to have the right papers with you. Take your warranty folder. All work to be performed may not be covered by the warranty. Discuss additional charges with the service manager. Keep a maintenance log of your vehicle’s service history. This can often provide a clue to the current problem.
500 IF YOU NEED CONSUMER ASSISTANCE high quality service. The manufacturer’s authorized dealers have the facilities, factory-trained technicians, special tools, and the latest information to ensure the vehicle is fixed correctly and in a timely manner. This is why you should always talk to an authorized dealer’s service manager first. Most matters can be resolved with this process. • If for some reason you are still not satisfied, talk to the general manager or owner of the authorized dealership.
IF YOU NEED CONSUMER ASSISTANCE Chrysler Canada Inc. Customer Center P.O. Box 1621 Windsor, Ontario N9A 4H6 Phone: (800) 465–2001 In Mexico contact: Av. Prolongacion Paseo de la Reforma, 1240 Sante Fe C.P. 05109 Mexico, D. F.
502 IF YOU NEED CONSUMER ASSISTANCE service contract that is not a manufacturer’s Service Contract, and you require service after the manufacturer’s New Vehicle Limited Warranty expires, please refer to the contract documents, and contact the person listed in those documents. We appreciate that you have made a major investment when you purchased the vehicle.
IF YOU NEED CONSUMER ASSISTANCE MOPART PARTS Mopart fluids, lubricants, parts, and accessories are available from an authorized dealer. They will help keep the vehicle operating at its best. REPORTING SAFETY DEFECTS In The 50 United States And Washington, D.C. If you believe that your vehicle has a defect that could cause a crash or cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying the manufacturer.
504 IF YOU NEED CONSUMER ASSISTANCE PUBLICATION ORDER FORMS To order the following manuals, you may use either the website or the phone numbers listed below. Visa, Mastercard, American Express, and Discover orders are accepted. If you prefer mailing your payment, please call for an order form. NOTE: A street address is required when ordering manuals (no P.O. Boxes).
IF YOU NEED CONSUMER ASSISTANCE Call toll free at: • 1–800–890–4038 (U.S.) • 1–800–387–1143 (Canada) Or Visit us on the Worldwide Web at: • www.techauthority.com DEPARTMENT OF TRANSPORTATION UNIFORM TIRE QUALITY GRADES The following tire grading categories were established by the National Highway Traffic Safety Administration. The specific grade rating assigned by the tire’s manufacturer in each category is shown on the sidewall of the tires on your vehicle.
506 IF YOU NEED CONSUMER ASSISTANCE WARNING! The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning, or peak traction characteristics. Temperature Grades The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat and its ability to dissipate heat, when tested under controlled conditions on a specified indoor laboratory test wheel.
INDEX 10
508 INDEX Adding Engine Coolant (Antifreeze) . . . . . . . . . . 458 Adding Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . 382 Adding Washer Fluid . . . . . . . . . . . . . . . . . . . . . 455 Additives, Fuel . . . . . . . . . . . . . . . . . . . . . . . . . 380 Adjustable Pedals . . . . . . . . . . . . . . . . . . . . . . . 177 Air Cleaner, Engine (Engine Air Cleaner Filter) . . . 445 Air Conditioner Maintenance . . . . . . . . . . . . . . . 450 Air Conditioning . . . . . . . . . . . . . . .
INDEX Automatic Dimming Mirror . . . . . . . . . . . . . . . . 100 Automatic Door Locks . . . . . . . . . . . . . . . . . . . 34,35 Automatic Headlights . . . . . . . . . . . . . . . . . . . . 163 Automatic Temperature Control (ATC) . . . . . . . . . 309 Automatic Transaxle . . . . . . . . . . . . . . . . . . . . . . 328 Adding Fluid . . . . . . . . . . . . . . . . . . . . . . . . . 465 Fluid Level Check . . . . . . . . . . . . . . . . . . . . . . 465 Interlock System . . . . . . . . . . . . . . . . . . .
510 INDEX Brakes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 337,462 Brake/Transmission Interlock . . . . . . . . . . . . . . . 328 Break-In Recommendations, New Vehicle . . . . . . . . 93 Bulb Replacement . . . . . . . . . . . . . . . . . . . . . . . 482 Bulbs, Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . 481 Calibration, Compass . . . . . . . . . . . . . . . . . . 240,246 Capacities, Fluid . . . . . . . . . . . . . . . . . . . . . . . . 486 Caps, Filler Fuel . . . . . . .
INDEX Coin Holder . . . . . . . . . . . . . . . . . . . . . . . . . . . 201 Cold Weather Operation . . . . . . . . . . . . . . . . . . . 325 Compact Disc (CD) Maintenance . . . . . . . . . . . . . 300 Compact Spare Tire . . . . . . . . . . . . . . . . . . . . . . 361 Compass . . . . . . . . . . . . . . . . . . . . . . . . 238,240,246 Compass Calibration . . . . . . . . . . . . . . . . . . 240,246 Compass Variance . . . . . . . . . . . . . . . . . . . . 240,247 Computer, Trip/Travel . . . . . . . . . . . .
512 INDEX Digital Video Disc (DVD) Player . . . . . . . . . . 280,283 Dimmer Control . . . . . . . . . . . . . . . . . . . . . . . . 162 Dimmer Switch, Headlight . . . . . . . . . . . . . . . . . 170 Dipsticks Automatic Transaxle . . . . . . . . . . . . . . . . . . . . 465 Automatic Transmission . . . . . . . . . . . . . . . . . 466 Oil (Engine) . . . . . . . . . . . . . . . . . . . . . . . . . . 441 Disabled Vehicle Towing . . . . . . . . . . . . . . . . . . . 428 Disposal Antifreeze (Engine Coolant) . .
INDEX Emission Control System Maintenance . . . . . . 438,490 Engine . . . . . . . . . . . . . . . . . . . . . . . . 93,434,435,436 Air Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . 445 Block Heater . . . . . . . . . . . . . . . . . . . . . . . . . 327 Break-In Recommendations . . . . . . . . . . . . . . . . 93 Checking Oil Level . . . . . . . . . . . . . . . . . . . . . 441 Compartment . . . . . . . . . . . . . . . . . . . . . . 435,436 Coolant (Antifreeze) . . . . . . . . . . . . . . . . .
514 INDEX Flashers Hazard Warning . . . . . . . . . . . . . . . . . . . . . . . 410 Turn Signal . . . . . . . . . . . . . . . . . . . . . 227,483,484 Flash-To-Pass . . . . . . . . . . . . . . . . . . . . . . . . . . . 170 Flat Tire Stowage . . . . . . . . . . . . . . . . . . . . . . . . 422 Flexible Fuel Vehicles Cruising Range . . . . . . . . . . . . . . . . . . . . . . . . 387 Engine Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . 387 Fuel Requirements . . . . . . . . . . . . . . . . . .
INDEX Requirements . . . . . . . . . . . . . . . . . . . . . . 377,486 System Hoses . . . . . . . . . . . . . . . . . . . . . . . . . 461 Tank Capacity . . . . . . . . . . . . . . . . . . . . . . . . 486 Fuel, Flexible . . . . . . . . . . . . . See Flexible Fuel Vehicles Fuel System Caution . . . . . . . . . . . . . . . . . . . . . 380 Fueling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 382 Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
516 INDEX Passing . . . . . . . . . . . . . . . . . . . . . . . . . . Replacing . . . . . . . . . . . . . . . . . . . . . . . . . Time Delay . . . . . . . . . . . . . . . . . . . . . . . Heated Seats . . . . . . . . . . . . . . . . . . . . . . . . Heater . . . . . . . . . . . . . . . . . . . . . . . . . . . . Heater, Engine Block . . . . . . . . . . . . . . . . . . High Beam/Low Beam Select (Dimmer) Switch Hitches Trailer Towing . . . . . . . . . . . . . . . . . . . . .
INDEX Key, Sentry (Immobilizer) Key-In Reminder . . . . . . Keyless Entry System . . . Keys . . . . . . . . . . . . . . Knee Bolster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 15 21 12 67 Lap/Shoulder Belts . . . . . . . . . . . . . . . . . . . . . . . 57 LATCH (Lower Anchors and Tether for CHildren) . . .
518 INDEX License . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 485 Lights On Reminder . . . . . . . . . . . . . . . . . . . . 165 Low Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . 234 Malfunction Indicator (Check Engine) . . . . . . . . 232 Oil Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . 233 Park . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162,483 Passing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170 Reading . . . . . . . . . . . .
INDEX Memory Seat . . . . . . . . . . . . . . . . . . . . . . . . 104,155 Mini-Trip Computer . . . . . . . . . . . . . . . . . . . 238,244 Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 Automatic Dimming . . . . . . . . . . . . . . . . . . . . 100 Electric Remote . . . . . . . . . . . . . . . . . . . . . 102,103 Exterior Folding . . . . . . . . . . . . . . . . . . . . . . . 102 Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155 Outside . . . . . . . . . . . . .
520 INDEX Outside Rearview Mirrors . . . . . . . . . . . . . . . 100,102 Overdrive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 332 Overhead Console . . . . . . . . . . . . . . . . . . . . . . . 182 Overhead Travel Information Center . . . . . . . . . . 182 Overheating, Engine . . . . . . . . . . . . . . . . . . . 226,410 Owner’s Manual (Operator Manual) . . . . . . . . . . 504 Panic Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Park Sense System, Rear . . . . . . . . . . .
INDEX Pretensioners Seat Belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 Programmable Electronic Features . . . . . . . . . . . . 248 Radial Ply Tires . . . . . . . . . . . . . . . . . . . . . . . . . 361 Radiator Cap (Coolant Pressure Cap) . . . . . . . 457,458 Radio Broadcast Signals . . . . . . . . . . . . . . . . . . . 251 Radio, Navigation . . . . . . . . . . . . . . . . . . . . . . . 283 Radio Operation . . . . . . . . . . . . . . . . . . . 281,284,299 Radio Remote Controls . . . .
522 INDEX Safety Checks Outside Vehicle . . . . . . . . . . . . . . . 94 Safety Defects, Reporting . . . . . . . . . . . . . . . . . . 503 Safety, Exhaust Gas . . . . . . . . . . . . . . . . . . . . . . . 51 Safety Information, Tire . . . . . . . . . . . . . . . . . . . 348 Safety Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 Satellite Radio . . . . . . . . . . . . 280,281,283,284,287,297 Satellite Radio Antenna . . . . . . . . . . . . . . . . . . . 288 Schedule, Maintenance . . . . .
INDEX Service Engine Soon Light (Malfunction Indicator) . . 232 Service Manuals . . . . . . . . . . . . . . . . . . . . . . . . 504 Setting the Clock . . . . . . . . . . . . . . . . 254,269,281,285 Settings, Personal . . . . . . . . . . . . . . . . . . . . . . . . 248 Shoulder Belts . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Signals, Turn . . . . . . . . . . . . . . . . . . . 166,227,483,484 Sliding Door . . . . . . . . . . . . . . . . . . . . . . . . . . . .
524 INDEX Synthetic Engine Oil . . . . . . . . . . . . . . . . . . . . . . 444 System, Navigation . . . . . . . . . . . . . . . . . . . . . . 283 System, Remote Starting . . . . . . . . . . . . . . . . . . . . 28 Tachometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 229 Temperature Control, Automatic (ATC) . . . . . . . . 309 Temperature Gauge, Engine Coolant . . . . . . . . 226,411 Tether Anchor, Child Restraint . . . . . . . . . . . . . . . 86 Tilt Steering Column . . . . . . . . . . . . .
INDEX Tread Wear Indicators . . . . . . . . . . . . . . . . . . . 364 Wheel Nut Torque . . . . . . . . . . . . . . . . . . . . . 422 Tongue Weight/Trailer Weight . . . . . . . . . . . . . . 399 Towing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 393 24-Hour Towing Assistance . . . . . . . . . . . . . . . 117 Disabled Vehicle . . . . . . . . . . . . . . . . . . . . . . . 428 Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 398 Recreational . . . . . . . . . . . . . . . . .
526 INDEX UConnect™ (Hands-Free Phone) . . . . . . . . . . 104,283 Uniform Tire Quality Grades . . . . . . . . . . . . . . . . 505 Universal Consumer Interface (UCI) Connector . . . 292 Universal Joints . . . . . . . . . . . . . . . . . . . . . . . . . 454 Universal Serial Bus (USB) Port . . . . . . . . . . . 280,283 Universal Transmitter . . . . . . . . . . . . . . . . . . . . . 185 Unleaded Gasoline . . . . . . . . . . . . . . . . . . . . . . . 377 Upholstery Care . . . . . . . . . . . . . . . . . . . .
INDEX Windshield Wiper Blades Windshield Wipers . . . . . Wiper Blade Replacement Wipers, Intermittent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 454 168 454 169 527 YES Essentialst Fabric Cleaning Procedure . . . . . . 471 Zone Control (Temperature Control) . . . . . . . . . .
INSTALLATION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this vehicle’s electronic system to provide immunity to radio frequency signals. Mobile two-way radios and telephone equipment must be installed properly by trained personnel. The following must be observed during installation. The positive power connection should be made directly to the battery and fused as close to the battery as possible.
2008 Caravan 2008 OWNER’ S MANUAL 81-226-0819 Fourth Edition Printed in U.S.A.
