2008 Caliber 2008 OWNER’ S MANUAL 81-226-0839 First Edition Printed in U.S.A.
VEHICLES SOLD IN CANADA With respect to any Vehicles Sold in Canada, the name Chrysler LLC shall be deemed to be deleted and the name Chrysler Canada Inc. used in substitution therefor. DRIVING AND ALCOHOL Drunken driving is one of the most frequent causes of accidents. Your driving ability can be seriously impaired with blood alcohol levels far below the legal minimum. If you are drinking, don’t drive. Ride with a designated non-drinking driver, call a cab, a friend, or use public transportation.
SECTION TABLE OF CONTENTS PAGE 1 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1 2 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 2 3 UNDERSTANDING THE FEATURES OF YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73 3 4 UNDERSTANDING YOUR INSTRUMENT PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INTRODUCTION CONTENTS 䡵 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 䡵 Vehicle Identification Number . . . . . . . . . . . . . . . 6 䡵 How To Use This Manual . . . . . . . . . . . . . . . . . . 4 䡵 Vehicle Modifications/Alterations . . . . . . . . . . . . 7 䡵 Warnings And Cautions . . . . . . . . . . . . . . . . . . .
4 INTRODUCTION INTRODUCTION This Owner’s Manual has been prepared with the assistance of service and engineering specialists to acquaint you with the operation and maintenance of your vehicle. It is supplemented by a Warranty Information Booklet and various customer-oriented documents. You are urged to read these publications carefully. Following the instructions and recommendations in this manual will help assure safe and enjoyable operation of your vehicle.
INTRODUCTION 5 1
6 INTRODUCTION WARNINGS AND CAUTIONS This Owner’s Manual contains WARNINGS against operating procedures that could result in an accident or bodily injury. It also contains CAUTIONS against procedures that could result in damage to your vehicle. If you do not read this entire manual, you may miss important information. Observe all Warnings and Cautions.
INTRODUCTION 7 VEHICLE MODIFICATIONS/ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2 CONTENTS 䡵 A Word About Your Keys . . . . . . . . . . . . . . . . . .12 ▫ Replacement Keys . . . . . . . . . . . . . . . . . . . . . .17 ▫ Ignition Key Removal . . . . . . . . . . . . . . . . . . .12 ▫ Customer Key Programming . . . . . . . . . . . . . .17 ▫ Locking Doors With The Key . . . . . . . . . . . . . .14 ▫ General Information . . . . . . . . . . . . . . . . . . . .18 ▫ Key-In-Ignition Reminder . . . . . . . . . . . . . . . .
10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ▫ To Lock The Doors And Liftgate . . . . . . . . . . . .22 ▫ Auto Down . . . . . . . . . . . . . . . . . . . . . . . . . .33 ▫ Using The Panic Alarm . . . . . . . . . . . . . . . . . .22 ▫ Window Lockout Switch . . . . . . . . . . . . . . . . .33 ▫ To Turn Off “Flash Lights With Lock” . . . . . . . .23 䡵 Liftgate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34 ▫ Programming Additional Transmitters . . . . . . . .
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ▫ Child Restraint . . . . . . . . . . . . . . . . . . . . . . . .60 䡵 Engine Break-In Recommendations . . . . . . . . . . .69 䡵 Safety Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . .69 ▫ Exhaust Gas . . . . . . . . . . . . . . . . . . . . . . . . . .69 11 ▫ Safety Checks You Should Make Inside The Vehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70 ▫ Periodic Safety Checks You Should Make Outside The Vehicle . . . . . . . . . . .
12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS The authorized dealer that sold you your new vehicle has the key code numbers for your vehicle locks. These numbers can be used to order duplicate keys. Ask your authorized dealer for these numbers and keep them in a safe place. Ignition Key Removal Manual Transmission 1. Turn the ignition switch to the ACC position. 2. Push the key and cylinder inward and rotate the key to the LOCK position. 3. Remove the key from the lock cylinder.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 Automatic Transmission — If Equipped 1. Place the shift lever in PARK. 2 2. Turn the ignition switch to the ACC position. 3. Push the key and cylinder inward and rotate the key to the LOCK position 4. remove the key from the lock cylinder. Ignition Key Positions NOTE: If you try to remove the key before you place the shift lever in PARK, the key may become trapped temporarily in the ignition cylinder.
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE feature is inoperable. The engine can be started and stopped but the key cannot be removed until you obtain service. WARNING! Never leave children alone in a vehicle. Leaving unattended children in a vehicle is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Don’t leave the keys in the ignition. A child could operate power windows, other controls, or move the vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE STEERING WHEEL LOCK — MANUAL TRANSMISSION ONLY Your manual transmission vehicle is equipped with a passive steering wheel lock. This lock prevents steering the vehicle without the ignition key. If the steering wheel is moved no more than one-half turn in either direction and the key is not in the ignition switch, the steering wheel will lock.
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: A key that has not been programmed is also considered an invalid key, even if it is cut to fit the ignition switch lock cylinder for that vehicle. During normal operation, after turning on the ignition switch, the Vehicle Security Alarm Indicator Light will turn on for three seconds for a bulb check. If the light remains on after the bulb check, it indicates that there is a problem with the electronics.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Replacement Keys NOTE: Only keys that are programmed to the vehicle electronics can be used to start and operate the vehicle. Once a Sentry Key威 is programmed to a vehicle, it cannot be programmed to any other vehicle. CAUTION! Always remove the Sentry Keys威 from the vehicle and lock all doors when leaving the vehicle unattended. At the time of purchase, the original owner is provided with a four-digit Personal Identification Number (PIN).
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. Insert the second valid key into the ignition switch. Turn the ignition switch to the ON position within 15 seconds. After 10 seconds, a chime will sound. In addition, the Vehicle Security Alarm Indicator Light will begin to flash. Turn the ignition switch to the LOCK position and remove the second key. 4. Insert a blank Sentry Key威 into the ignition switch. Turn the ignition switch to the ON position within 60 seconds.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 • This device must accept any interference that may be received, including interference that may cause undesired operation. To Set The Security Alarm SECURITY ALARM SYSTEM — IF EQUIPPED This Security Alarm System monitors the doors, hood, liftgate, and ignition switch for unauthorized operation. 2. Lock the door using either the power door LOCK switch or the Remote Keyless Entry (RKE) transmitter and close all doors.
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Disarm The Security Alarm System 1. Press UNLOCK on the RKE transmitter. 2. Starting the vehicle with a valid Sentry Key威 will disarm the Security Alarm. A valid key is one that is programmed to your vehicle. A valid key will disarm the Security Alarm System; an invalid key will allow the engine to run for two seconds and stop.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: The line of transmission must not be blocked with metal objects. To Unlock The Doors And Liftgate Press and release the UNLOCK button on the RKE transmitter once to unlock only the driver’s door or twice to unlock all the doors and liftgate. When the UNLOCK button is pressed, the illuminated entry will initiate, and the parking lights will flash on twice.
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE activated will cause the alarm to sound. Press the UNLOCK button to deactivate the Security Alarm. 5. If the desired programming was not achieved or to reactivate this feature, repeat the above steps. To Lock The Doors And Liftgate Press and release the LOCK button on the RKE transmitter to lock all doors. The turn signal lights will flash and the horn will chirp once to acknowledge the lock signal.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Turn Off “Flash Lights With Lock” NOTE: The “Flash Lights With Lock” feature can be turned on or off. On EVIC equipped vehicles refer to ⬙Personal Settings⬙ under “Electronic Vehicle Information Center (EVIC)” in Section 4. For vehicles not equipped with an EVIC, perform the following steps: 1. Press the UNLOCK button for four to 10 seconds. 2. While the UNLOCK button is pressed (after four seconds), press the LOCK button. Release both buttons. 3.
24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Use the following procedure to program additional RKE transmitters if the vehicle is not equipped with Sentry Key威: 1. Enter your vehicle and close all doors. 2. Fasten your seat belt (fastening the seat belt will cancel any chiming that may confuse you during this programming procedure). 3. Place the key into the ignition. 4. Turn the ignition to the ON position. Do not start the engine. 5. Press and hold the UNLOCK button on the RKE transmitter. 6.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 14. Your vehicle will remain in program mode up to 60 seconds from when the original chime was heard. After 60 seconds, all programmed RKE transmitters function normally. NOTE: If you do not have a programmed RKE transmitter, contact your authorized dealer for details. General Information This device complies with Part 15 of FCC rules and with RS-210 of Industry Canada. Operation is subject to the following conditions: 1.
26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 1. If the RKE transmitter is equipped with a screw, remove the screw. With the RKE transmitter buttons facing down, use a flat blade to pry the two halves of the RKE transmitter apart. Make sure not to damage the elastomer seal during removal. 2. Remove and replace the batteries. Avoid touching the new batteries with your fingers. Skin oils may cause battery deterioration. If you touch a battery, clean it with rubbing alcohol. 3.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27 WARNING! When leaving the vehicle, always remove the key from the ignition lock and lock your vehicle. Do not leave unattended children in the vehicle or with access to an unlocked vehicle. Unsupervised use of vehicle equipment may cause severe personal injuries and death.
28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Power Door Locks A power door lock switch is located on the drivers door panel. Press this switch to lock or unlock the doors. Automatic Door Locks — If Equipped The doors will lock automatically on vehicles with power door locks if all of the following conditions are met: 1. The Auto Lock feature is enabled. 2. The transmission is in gear. 3. All doors are closed. 4. The throttle is pressed. 5. The vehicle speed is above 15 mph (24 km/h). 6.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE For vehicles not equipped with the EVIC, the Automatic Door Locks can be enabled or disabled by performing the following procedure: 1. Close all doors and place the key in the ignition. 2. Cycle the ignition switch between LOCK and ON and back to LOCK four times, ending up in the LOCK position. 29 3. Depress the power door LOCK switch to lock the doors. 4. A single chime will indicate the completion of the programming. 5.
30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The Auto Unlock feature can be enabled or disabled. Refer to “Personal Settings” under “Electronic Vehicle Information Center (EVIC) — (if equipped)” in Section 4. For vehicles not equipped with the EVIC, the Auto Unlock Feature can be enabled or disabled by performing the following procedure: 1. Close all doors and place the key in the ignition. 2. Cycle the ignition switch between LOCK and ON and back to LOCK four times, ending up in the LOCK position.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 NOTE: Use the Auto Door Locks and Auto Unlock features in accordance with local laws. Child-Protection Door Lock System (Rear Doors) — If Equipped Insert the tip of the ignition key into the lock and rotate to the LOCK or UNLOCK position.
32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! POWER WINDOWS — IF EQUIPPED Power Window Switches Avoid trapping anyone in a vehicle in a collision. Remember that the rear doors can only be opened from the outside when the child protection locks are engaged. NOTE: For emergency exit with the system engaged, move the lock plunger up (unlocked position), roll down the window and open the door with the outside door handle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The driver’s door panel has up-down switches that give you finger-tip control of all four power windows. There is a single open and close switch on each passenger door panel for passenger window control. The windows will operate only when the ignition switch is turned to the ON position, ACC position, and for up to 10 minutes after the ignition is turned OFF or the driver’s door is opened.
34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE LIFTGATE NOTE: The key that is used to start your vehicle is also used to lock or unlock the doors and open the liftgate. To unlock the liftgate, insert the key into the lock and turn it to the right (manual lock models only). The liftgate can also be unlocked using the Remote Keyless Entry (RKE) transmitter or by activating the power door LOCK switches located on the front doors.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 • Although the liftgate has no inside release mechanism, the liftgate trim panel includes an opening with a snap-in cap that provides access to release the latch in the event of an electrical system malfunction. Gas props support the liftgate in the open position. However, because the gas pressure drops with temperature, it may be necessary to assist the props when opening the liftgate in cold weather.
36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! In a collision, you and your passengers can suffer much greater injuries if you are not properly buckled up. You can strike the interior of your vehicle or other passengers, or you can be thrown out of the vehicle. Always be sure you and others in your vehicle are buckled up properly. Even though you are an excellent driver, buckle up, even on short trips. Someone on the road may be a poor driver and cause a collision that includes you.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37 WARNING! WARNING! • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. • Wearing a seat belt incorrectly is dangerous. Seat belts are designed to go around the large bones of your body. These are the strongest parts of your body and can take the forces of a collision the best.
38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Lap/Shoulder Belt Operating Instructions 1. Enter the vehicle and close the door. Sit back and adjust the seat. 2. The seat belt latch plate is above the back of the front seat, next to your arm. Grasp the latch plate and pull out the belt. Slide the latch plate up the webbing as far as necessary to allow the belt to go around your lap.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” 39 WARNING! • A belt that is buckled into the wrong buckle will not protect you properly. The lap portion could ride too high on your body, possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • A belt that is too loose will not protect you as well.
40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 4. Position the lap belt across your thighs, below your abdomen. To remove slack in the lap belt portion, pull up on the shoulder belt. To loosen the lap belt if it is too tight, tilt the latch plate and pull on the lap belt. A snug belt reduces the risk of sliding under the belt in a collision. WARNING! • A lap belt worn too high can increase the risk of internal injury in a collision.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 6. To release the belt, push the red button on the buckle. The belt will automatically retract to its stowed position. If necessary, slide the latch plate down the webbing to allow the belt to retract fully. WARNING! 41 Adjustable Upper Shoulder Belt Anchorage In the front seat, the shoulder belt can be adjusted upward or downward to position the belt away from your neck.
42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE As a guide, if you are shorter than average, you will prefer a lower position, and if you are taller than average, you’ll prefer a higher position. When you release the anchorage, try to move it up or down to make sure that it is locked in position.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 2 Routing The Rear Center Shoulder Belt Routing The Rear Center Shoulder Belt 4. When the belt is long enough to fit, insert the minilatch plate into the mini-buckle until you hear a “click.” 5. Sit back in seat. Slide the regular latch plate up the webbing as far as necessary to allow the belt to go around your lap.
44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 6. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” on the shoulder belt. To loosen the lap belt if it is too tight, pull on the lap belt. A snug belt reduces the risk of sliding under the belt in a collision. Connecting Mini-Latch to Buckle 7. Position the lap belt across your thighs, below your abdomen. To remove slack in the lap belt portion, pull up Rear Center Seat Belt Buckled 8.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 9. To release the belt, push the red button on the buckle. 45 slide the latch plate down the webbing to allow the belt to retract fully. Insert the mini-latch plate into the slot provided in the trim panel. Seat Belt Pretensioners The seat belts for both front seating positions are equipped with pretensioning devices that are designed to remove slack from the seat belt in the event of a collision.
46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE the pretensioners are single use items. After a collision that is severe enough to deploy the airbags and pretensioners, both must be replaced.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: Watch for the Seat Belt Warning Light to turn on while unbuckling and off while re-buckling the seat belt. It may be necessary to retract the seat belt. 4. Turn the ignition switch to the LOCK position. A single chime will sound to signify that you have successfully completed the programming. The Enhanced Warning System (BeltAlert威) can be reactivated by repeating this procedure.
48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Driver And Front Passenger Supplemental Restraint System (SRS) - Airbag This vehicle has airbags for both the driver and front passenger as a supplement to the seat belt restraint systems. The driver’s front airbag is mounted in the center of the steering wheel. The passenger’s front airbag is mounted in the instrument panel, above the glove compartment. The words SRS AIRBAG are embossed on the airbag covers.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE This vehicle may also be equipped with side curtain airbags to protect the driver and passengers sitting next to a window. If the vehicle is equipped with side curtain airbags, they are located above the side windows. Their covers are also labeled SRS AIRBAG. 49 WARNING! • Do not put anything on or around the airbag covers or attempt to manually open them. You may damage the airbags and you could be injured because the airbags are not there to protect you.
50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Airbags inflate in moderate to high speed impacts. Along with seat belts and pretensioners, front airbags work with the driver inflatable knee blocker and the integrated passenger knee blocker (non-inflatable) to provide improved protection for the driver and front passenger. Side airbags also work with seat belts to improve occupant protection. The seat belts are designed to protect you in many types of collisions.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE You should read the instructions provided with your child restraint to make sure that you are using it properly. 2. All occupants should wear their lap and shoulder belts properly. 3. The driver and front passenger seats should be moved back as far as practical to allow the front airbags room to inflate. 4. If your vehicle has side airbags, do not lean against the door; airbags will inflate forcefully into the space between you and the door. 5.
52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The front airbag system consists of the following: • Occupant Restraint Controller (ORC) • Side Remote Acceleration Sensors (If Equipped) • Airbag Warning Light • Driver Airbag • Front Passenger Airbag • Supplemental Side Curtain Airbags Above Side Windows (If Equipped) • Steering Wheel and Column • Instrument Panel • Interconnecting Wiring • Seatbelt Reminder Light • Knee Impact Bolsters • Driver Inflatable Knee Blocker • Front Acceleration Sensors • Driver
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The ORC also turns on the Airbag Warning Light in the instrument panel for six to eight seconds as a self-check when the ignition is first turned on. After the self-check, the Airbag Warning Light will turn off. If the ORC detects a malfunction in any part of the system, it turns on the Airbag Warning Light either momentarily or continuously. A single chime will sound if the light comes on again after initial start up.
54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • The Side Impact (SRS) Side Curtain Airbags (If Equipped) are designed to activate only in certain side collisions. properly, or if items are positioned in the area where the side curtain airbag inflates. This especially applies to children. The ORC module determines if a side collision is severe enough to require the side airbags to inflate. The side airbag control module will not detect roll over, front or rear collisions.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE this is only about half of the time it takes you to blink your eyes. It then quickly deflates while helping to protect the driver’s knees. • The Knee Impact Bolsters help protect the knees and position everyone for the best interaction with the front airbag. WARNING! Unapproved modifications or service procedures to the front passenger seat assembly, its related components, or seat cover may inadvertently change the airbag deployment in case of a frontal crash.
56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE However, if you haven’t healed significantly within a few days, or if you have any blistering, see your doctor immediately. • As the airbags deflate you may see some smoke-like particles. The particles are a normal by-product of the process that generates the nontoxic gas used for airbag inflation. These airborne particles may irritate the skin, eyes, nose, or throat. If you have skin or eye irritation, rinse the area with cool water.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Maintaining Your Airbag System WARNING! • Modifications to any part of the airbag system could cause it to fail when you need it. You could be injured because the airbags are not there to protect you. Do not modify the components or wiring, including adding any kind of badges or stickers to the steering wheel hub trim cover or the upper passenger side of the instrument panel. Do not modify the front bumper, vehicle body structure, or frame.
58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE moment of airbag deployment, or near-deployment, and up to a quarter-second of high-speed deceleration data during and/or after airbag deployment or neardeployment. EDR data are ONLY recorded if an airbag deploys, or nearly deploys, and are otherwise unavailable.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE identify a particular driver, vehicle, or crash, will be treated confidentially. Confidential data will not be disclosed by DaimlerChrysler to any third party except when: 1. Used for research purposes, such as to match data with a particular crash record in an aggregate database, provided confidentiality of personal data is thereafter preserved. 2. Used in defense of DaimlerChrysler product.
60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Child Restraint Everyone in your vehicle needs to be buckled up at all times — babies and children, too. Every state in the United States and all Canadian provinces require that small children ride in proper restraint systems. This is the law, and you can be prosecuted for ignoring it. Children 12 years and younger should ride properly buckled up in a rear seat, if available.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Safety experts recommend that children ride rearward-facing in the vehicle until they are at least one year old and weigh at least 20 lbs (9 kg). Two types of child restraints can be used rearward-facing: infant carriers and ⬙convertible⬙ child seats. Both types of child restraints are held in the vehicle by the lap/ shoulder belt or the LATCH child restraint anchorage system. • The infant carrier is only used rearward-facing in the vehicle.
62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE and booster seat are held in the vehicle by the lap/ shoulder belt. (Some booster seats are equipped with a front shield and are held in the vehicle by the lap portion). NOTE: For additional www.seatcheck.org. information, refer to WARNING! • Improper installation can lead to failure of an infant or child restraint. It could come loose in a collision. The child could be badly injured or killed.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Here are some tips on getting the most out of your child restraint: • Before buying any restraint system, make sure that it has a label certifying that it meets all applicable Safety Standards. We also recommend that you make sure that you can install the child restraint in the vehicle where you will use it before you buy it. • The restraint must be appropriate for your child’s weight and height. Check the label on the restraint for weight and height limits.
64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • If the belt still can’t be tightened, or if by pulling and pushing on the restraint loosens the belt, disconnect the latch plate from the buckle, turn the latch plate around, and insert the latch plate into the buckle again. If you still can’t make the child restraint secure, try a different seating position. • Buckle the child into the seat according to the child restraint manufacturer’s directions.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Your vehicle is equipped with the child restraint anchorage system called LATCH, which stands for Lower Anchors and Tether for CHildren. The LATCH system provides for the installation of the child restraint without using the vehicle seat belt. All three rear seating positions have lower anchorages that are capable of accommodating LATCH-compatible child seats having flexible, webbing-mounted lower attachments.
66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Child restraint systems having attachments designed to connect to the lower anchorages are now available. Child restraints having tether straps and hooks for connection to the top tether anchorage have been available for some time. In fact, many child restraint manufacturers will provide add-on tether strap kits for some of their older products. Tether anchorage kits are also available for most older vehicles.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 67 rearward-facing infant restraints will also be equipped with a tether strap with a hook and means for adjusting the tension in the strap. 2 In general, you will first loosen the adjusters on the lower and tether straps so that you can more easily attach the hook or connector to the lower and tether anchorages. The tether strap should be routed under the center of the head restraint and attached to the tether anchor on the rear of the seat back.
68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! An incorrectly anchored tether strap could lead to increased head motion and possible injury to the child. Use only the anchor position directly behind the child seat to secure a child restraint top tether strap.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ENGINE BREAK-IN RECOMMENDATIONS A long break-in period is not required for the engine in your new vehicle. Drive moderately during the first 300 mi (500 km). After the initial 60 mi (100 km), speeds up to 50 or 55 mph (80 or 90 km/h) are desirable. While cruising, brief full-throttle acceleration, within the limits of local traffic laws, contributes to a good break-in. Wide-open throttle acceleration in low gear can be detrimental and should be avoided.
70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If it is necessary to sit in a parked vehicle with the engine running, adjust your heating or cooling controls to force outside air into the vehicle. Set the blower at high speed. WARNING! If you are required to drive with the deck lid/liftgate open, make sure that all windows are closed, and the climate control blower switch is set at high speed. DO NOT use the recirculation mode.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Periodic Safety Checks You Should Make Outside The Vehicle Tires Examine tires for excessive tread wear or uneven wear patterns. Check for stones, nails, glass, or other objects lodged in the tread. Inspect tread and sidewall for cuts or cracks. Check wheel nuts for tightness and tires (including spare) for proper pressure. 71 Lights Have someone observe the operation of exterior lights while you work the controls.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS 3 䡵 Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77 ▫ Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . .82 ▫ Inside Day/Night Mirror — If Equipped . . . . . .77 ▫ Phone Call Features . . . . . . . . . . . . . . . . . . . .89 ▫ Outside Mirror — Driver’s Side . . . . . . . . . . . .77 ▫ UConnect威 System Features . . . . . . . . . . . . . . .92 ▫ Outside Mirror — Passenger’s Side . . . . . . . . . .
74 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Manual Seat Height Adjustment — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . 108 ▫ Headlights, Parking Lights And Instrument Panel Lights . . . . . . . . . . . . . . . . . . . . . . . . . 118 ▫ Manual Lumbar — If Equipped . . . . . . . . . . . 109 ▫ Lights-On Reminder . . . . . . . . . . . . . . . . . . . 119 ▫ Driver’s Seatback Recline . . . . . . . . . . . . . . . . 109 ▫ Fog Lights — If Equipped . . . . . . . . . . . . . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 75 ▫ Intermittent Wiper System . . . . . . . . . . . . . . . 124 ▫ Anti-Lock Brake System (ABS) . . . . . . . . . . . . 129 ▫ Adding Washer Fluid . . . . . . . . . . . . . . . . . . 124 ▫ Brake Assist System (BAS) . . . . . . . . . . . . . . . 130 䡵 Tilt Steering Column . . . . . . . . . . . . . . . . . . . . 125 ▫ Traction Control System (TCS) . . . . . . . . . . . . 131 䡵 Electronic Speed Control — If Equipped . . . . . .
76 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Opening Sunroof — Manual . . . . . . . . . . . . . 142 䡵 Console Features . . . . . . . . . . . . . . . . . . . . . . . 146 ▫ Opening Sunroof — Express Mode . . . . . . . . . 142 䡵 Cargo Area Features . . . . . . . . . . . . . . . . . . . . . 147 ▫ Closing Sunroof — Manual . . . . . . . . . . . . . . 142 ▫ Cargo Light/Removable Self-Recharging Flashlight – If Equipped . . . . . . . . . . . . . . . . 147 ▫ Closing Sunroof — Express Mode . . . . . . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 77 MIRRORS Inside Day/Night Mirror — If Equipped Adjust the mirror to center on the view through the rear window. A two-point pivot system allows for horizontal and vertical mirror adjustment. 3 Annoying headlight glare can be reduced by moving the small control under the mirror to the night position (toward the rear of vehicle). The mirror should be adjusted while set in the day position (toward the windshield).
78 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Outside Mirror — Passenger’s Side Adjust the convex outside mirror so you can just see the side of your vehicle in the part of the mirror closest to the vehicle with your head close to the center of the vehicle. Power Mirrors — If Equipped The control for the power mirrors is located on the driver’s door trim panel. WARNING! Vehicles and other objects seen in the passenger side convex mirror will look smaller and farther away than they really are.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 79 To adjust a mirror, turn the control wand toward the left or right mirror positions indicated. Tilt the control wand in the direction you want the mirror to move. When finished adjusting the mirror, turn the control to the center position to prevent accidentally moving a mirror. WARNING! Mirror Directions Vehicles and other objects seen in the passenger side convex mirror will look smaller and farther away than they really are.
80 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Vanity Mirrors — If Equipped To use the vanity mirror, rotate the sun visor down and swing the mirror cover upward. Sun Visor Sliding Feature The sun visors may be extended out to provide more coverage of the side glass. HANDS-FREE COMMUNICATION (UConnect姞) — IF EQUIPPED NOTE: The sales code RER radio contains an integrated Hands-Free Communication (UConnect威) system.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The UConnect威 system requires a cellular phone equipped with the Bluetooth威 ⬙Hands-Free Profile,⬙ Version 0.96 or higher. See the UConnect威 website for supported phones. NOTE: For UConnect威 customer support, visit the following websites: • www.chrysler.com/uconnect • www.dodge.com/uconnect • www.jeep.
82 UNDERSTANDING THE FEATURES OF YOUR VEHICLE radio or the mirror has the two control buttons (PHONE Button and VOICE RECOGNITION button) that will enable you to access the system. can be adjusted either from the radio volume control knob or from the steering wheel radio control (right switch), if so equipped. Voice Recognition Button Actual button location may vary with radio. The individual buttons are described in the “Operation” section.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE • For certain operations, compound commands can be used. For example, instead of saying ⬙Setup⬙ and then ⬙Phone Pairing,⬙ the following compound command can be said: ⬙Setup Phone Pairing.⬙ • For each feature explanation in this section, only the combined form of the voice command is given. You can also break the commands into parts and say each part of the command when you are asked for it.
84 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To complete the pairing process, you will need to reference your cellular phone Owner’s Manual. The UConnect威 website may also provide detailed instructions for pairing. • For identification purposes, you will be prompted to give the UConnect威 system a name for your cellular phone. Each cellular phone that is paired should be given a unique phone name.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 85 Dial by Saying a Number Call by Saying a Name • Press the PHONE button to begin. • Press the PHONE button to begin. • After the ⬙Ready⬙ prompt and the following beep, say ⬙Dial.⬙ • After the ⬙Ready⬙ prompt and the following beep, say “Call.⬙ • The system will prompt you to say the number you want to call. • The system will prompt you to say the name of the person you want to call. • For example, you can say ⬙234-567-8901.
86 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Add Names to Your UConnect威 Phonebook NOTE: Adding names to the phonebook is recommended when the vehicle is not in motion. • Press the PHONE button to begin. • After the ⬙Ready⬙ prompt and the following beep, say ⬙Phonebook New Entry.⬙ • When prompted, say the name of the new entry. Use of long names helps the voice recognition and it is recommended. For example, say ⬙Robert Smith⬙ or ⬙Robert⬙ instead of ⬙Bob.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Object Exchange Profile (OBEX). Please see your phone Owner’s Manual for specific instructions on how to send these entries from your phone. Edit Entries in the UConnect威 Phonebook NOTE: • The phone handset must support Bluetooth威 OBEX transfers of phonebook entries to use this feature. • Press the PHONE button to begin.
88 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ⬙Phonebook Edit⬙ can be used to add another phone number to a name entry that already exists in the phonebook. For example, the entry John Doe may have a mobile and a home number, but you can add ”John Doe’s” work number later using the ⬙Phonebook Edit⬙ feature. Delete Entries in the UConnect威 Phonebook NOTE: Editing phonebook entries is recommended when the vehicle is not in motion. • Press the PHONE button to begin. from which you choose.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 89 • After confirmation, the phonebook entries will be deleted. • The UConnect威 system will then prompt you as to the number designation you wish to call. • Note that only the phonebook in the current language is deleted. • The selected number will be dialed. List All Names in the UConnect威 Phonebook • Press the PHONE button to begin. • After the ⬙Ready⬙ prompt and the following beep, say ⬙Phonebook List Names.
90 UNDERSTANDING THE FEATURES OF YOUR VEHICLE the call, press and hold the PHONE button until you hear a single beep, indicating that the incoming call was rejected. Answer or Reject an Incoming Call - Call Currently in Progress If a call is currently in progress and you have another incoming call, you will hear the same network tones for call waiting that you normally hear when using your cell phone. Press the PHONE button to place the current call on hold and answer the incoming call.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE indicating that the active and hold status of the two calls have switched. Only one call can be placed on hold at one time. Conference Call When two calls are in progress (one active and one on hold), press and hold the PHONE button until you hear a double beep indicating that the two calls have been joined into one conference call.
92 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Call Continuation Call continuation is the progression of a phone call on the UConnect威 system after the vehicle ignition key has been switched to OFF.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 93 Emergency Assistance If you are in an emergency and the mobile phone is reachable: and Canada and 060 for Mexico). The number dialed may not be applicable with the available cellular service and area. • Pick up the phone and manually dial the emergency number for your area. The UConnect威 system does slightly lower your chances of successfully making a phone call as to that for the cell phone directly.
94 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The Towing Assistance number dialed is based on the country where the vehicle is purchased (1-800-5282069 for the U.S., 1-877-213-4525 for Canada, 55-14-3454 for Mexico City and 1-800-712-3040 for outside Mexico City in Mexico). Please refer to the 24-Hour “Towing Assistance” coverage details in the Warranty Information Booklet and on the 24–Hour Towing Assistance Card. Paging To learn how to page, refer to ⬙Working with Automated Systems.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE numbers, followed by ⬙Send,⬙ is also to be used for navigating through an automated customer service center menu structure, and to leave a number on a pager. You can also send stored UConnect威 phonebook entries as tones for fast and easy access to voice mail and pager entries. To use this feature, dial the number you wish to call and then press the “Voice Recognition” button and say, “Send.
96 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Phone and Network Status Indicators If available on the radio and/or on a premium display such as the instrument panel cluster, and supported by your cell phone, the UConnect威 system will provide notification to inform you of your phone and network status when you are attempting to make a phone call using UConnect威. The status is given for roaming, network signal strength, phone battery strength, etc.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Advanced Phone Connectivity List Paired Cellular Phone Names Transfer Call to and from Cellular Phone The UConnect威 system allows ongoing calls to be transferred from your cellular phone to the UConnect威 system without terminating the call. To transfer an ongoing call from your UConnect威 paired cellular phone to the UConnect威 system or vice versa, press the “Voice Recognition” button and say ⬙Transfer Call.⬙ • Press the PHONE button to begin.
98 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Select Another Cellular Phone This feature allows you to select and start using another phone paired with the UConnect威 system. • Press the PHONE button to begin. • After the ⬙Ready⬙ prompt and the following beep, say ⬙Setup Select Phone⬙ and follow the prompts. • You can also press the “Voice Recognition” button at any time while the list is being played, and then choose the phone that you wish to select.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Training For users experiencing difficulty with the system recognizing their voice commands or numbers, the UConnect威 system Voice Training feature may be used. To enter this training mode, follow one of the two following procedures: From outside the UConnect威 mode (e.g.
100 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Performance is maximized under: • low-to-medium blower setting, • low-to-medium vehicle speed, • low road noise, • smooth road surface, • fully closed windows, • dry weather condition. • Even though the system is designed for users speaking in North American English, French, and Spanish accents, the system may not always work for some.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE • low-to-medium vehicle speed, • low road noise, • smooth road surface, • fully closed windows, • dry weather conditions, and • operation from the drivers seat. • Performance, such as audio clarity, echo, and loudness to a large degree rely on the phone and network, and not the UConnect威 system. • Echo at the far end can sometimes be reduced by lowering the in-vehicle audio volume.
102 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 103 3
104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Primary zero one two three four five six seven eight nine star (*) plus (+) pound (#) add location all Voice Commands Alternate(s) Voice Commands Primary Alternate(s) call cancel confirmation prompts continue delete dial download edit emergency English erase all Espanol Francais help home 105 3
106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Primary language list names list phones mobile mute mute off new entry no pager pair a phone phone pairing phonebook previous record again redial Voice Commands Alternate(s) pairing phone book Voice Commands Primary Alternate(s) return to main menu return or main menu select phone select send set up phone settings or phone set up towing assistance transfer call UConnect威 Tutorial try again voice training work yes
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 107 General Information This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. 3 • This device must accept any interference received, including interference that may cause undesired operation. SEATS Front Seat Adjustment The adjusting bar is at the front of the seats, near the floor.
108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! • Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured. Adjust the seat only while the vehicle is parked. Manual Seat Height Adjustment — If Equipped The driver’s seat height can be raised or lowered by using the ratcheting handle on the outboard side of the seat to adjust the driving position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Manual Lumbar — If Equipped The lumbar adjustment is located on the outboard side of the driver’s seat. To increase or decrease support, rotate the handle up or down. 109 Driver’s Seatback Recline To recline: 1. Lean forward before lifting the handle, then lean back to the desired position and release the handle. 2. Lift the handle to return the seatback to an upright position.
110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Adjustable Head Restraints Head restraints can reduce the risk of whiplash injury in the event of impact from the rear. Pull up or push down on the head restraints so that the upper edge is as high as practical. To raise the head restraint, pull up on the head restraint. To lower the head restraint, depress the button and push down on the head restraint.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Heated Seats — If Equipped WARNING! Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaustion or other physical condition must exercise care when using the seat heater. It may cause burns even at low temperatures, especially if used for long periods of time. Do not place anything on the seat that insulates against heat, such as a blanket or cushion.
112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Pressing the switch once will select HIGH-level heating. Pressing the switch a second time will select LOW-level heating. Pressing the switch a third time will shut the heating elements OFF. Fold Flat Front Passenger Seat To fold the front passenger seat, lift the recliner handle to full up position and push the seatback forward until it rests on the cushion in the fold flat position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 113 Folding Rear Seat To provide additional storage, each rear seatback can be folded forward. Pull the strap forward to move the seat forward and flat.
114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Reclining Rear Seat — If Equipped Rear Seat Folded Flat Reclining The Rear Seat For additional comfort, pull the strap forward just enough to release the seatback latch. Then push the seatback to a reclined position, approximately 35 degrees maximum, and release the strap.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. 115 TO OPEN AND CLOSE THE HOOD To open the hood, two latches must be released. First pull the hood release lever located on the left kick panel.
116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Then move the safety catch located under the front edge of the hood, near the center and raise the hood. Lift the hood prop rod, clipped to the left side (right side facing hood) of the engine compartment, to secure the hood in the open position. Place the hood prop at the location stamped into the inner hood surface. To prevent possible damage, do not slam the hood to close it. Lower the hood until it is open approximately 8 in (20 cm) and then drop it.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE LIGHTS Map/Reading Lights These lights are mounted between the sun visors above the rearview mirror. Each light is turned on by pressing the button. Press the button a second time to turn the light OFF. The lights also come on when a door is opened or the dimmer control is turned fully upward, past the second detent.
118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Headlights, Parking Lights and Instrument Panel Lights Turn the end of the Multifunction Control Lever to the first detent for parking light operation. Turn to the second detent for headlight operation. To change the brightness of the instrument panel lights, rotate the center portion of the Multifunction Control Lever up or down.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 119 Lights-on Reminder If the headlights or parking lights are on after the ignition is turned OFF, a chime will sound to alert the driver when the driver’s door is opened. The front fog light switch is on the Multifunction Control Lever. To activate the front fog lights, turn on the parking lights or the low beam headlights and pull out the end of the Multifunction Control Lever.
120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Move the Multifunction Control Lever up or down and the arrows on each side of the instrument cluster flash to show proper operation of the front and rear turn signal lights. You can signal a lane change by moving the Multifunction Control Lever partially up or down without moving beyond the detent. Turn Signals If either light remains on and does not flash, or there is a very fast flash rate, check for a defective outside light bulb.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Highbeam/Lowbeam Select Switch 121 Passing Light You can signal another vehicle with your headlights by lightly pulling the Multifunction Control Lever toward you. This will cause the headlights to turn on at high beam and remain on until the Multifunction Control Lever is released. NOTE: If the Multifunction Control Lever is held in the flash-to-pass position for more than 15 seconds, the high beams will shut off.
122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: On this vehicle, the DRLs will automatically turn off when the turn signals or hazard warning flashers are in operation and automatically turn back on when the turn signals or hazard warning flashers are not operating. If the Multifunction Control Lever is pulled while in the OFF position, the wipers will operate for two wipe cycles, then turn OFF.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Mist Feature Push down on the Multifunction Control Lever to activate a single wipe to clear the windshield of road mist or spray from a passing vehicle. As long as the Multifunction Control Lever is held down, the wipers will continue to operate. Mist Single Wipe Control 123 CAUTION! In cold weather, always turn off the wiper switch and allow the wipers to return to the park position before turning off the engine.
124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Windshield Wiper Operation Turn the end of the handle to select the desired wiper speed. Wiper Control Intermittent Wiper System Use the intermittent wiper when weather conditions make a single wiping cycle, with a variable pause between cycles, desirable. Select the delay interval by turning the end of the lever. Rotate the knob upward (clockwise) to decrease the delay time and downward (counterclockwise) to increase the delay time.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE TILT STEERING COLUMN To tilt the steering column, push down on the lever below the Multifunction Control Lever. With one hand firmly on the wheel, move the steering column up or down as desired. Push the lever back up to lock the column firmly in place. Tilt Steering Control 125 WARNING! Tilting the steering column while the vehicle is moving is dangerous. Without a stable steering column, you could lose control of the vehicle and have an accident.
126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ELECTRONIC SPEED CONTROL — IF EQUIPPED When engaged, this device takes over the accelerator operation at speeds greater than 25 mph (40 km/h). The speed control lever is located on the right side of the steering wheel. To Activate Push the ON/OFF button. The CRUISE indicator in the instrument cluster will illuminate. To turn the system off, push the ON/OFF button a second time. The CRUISE indicator will turn off.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Set At A Desired Speed When the vehicle has reached the desired speed, press down on the lever and release. Release the accelerator and the vehicle will operate at the selected speed. NOTE: The vehicle should be traveling at a steady speed and on level ground before pressing the SET lever.
128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Manual Transaxle Depressing the clutch pedal will disengage the speed control. A slight increase in engine RPM before the speed control disengages is normal. Vehicles equipped with manual transaxles may need to be shifted into a lower gear to climb hills without speed loss. WARNING! Speed control can be dangerous where the system can’t maintain a constant speed. Your vehicle could go too fast for the conditions, and you could lose control.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! • The Anti-Lock Brake System (ABS) cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. • The ABS cannot prevent accidents, including those resulting from excessive speed in turns, driving on very slippery surfaces, or hydroplaning. Only a safe, attentive, and skillful driver can prevent accidents.
130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Brake Assist System (BAS) The BAS is designed to optimize the vehicle’s braking capability during emergency braking maneuvers. The system detects an emergency braking situation by sensing the rate and amount of brake application and then applies optimum pressure to the brakes. This can help reduce braking distances. The BAS complements the Anti-Lock Brake System (ABS). Applying the brakes very quickly results in the best BAS assistance.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Traction Control System (TCS) This system monitors the amount of wheel spin of each of the driven wheels. If wheel spin is detected, brake pressure is applied to the slipping wheel(s) and engine power is reduced to provide enhanced acceleration and stability. A feature of the TCS system functions similar to a limited slip differential and controls the wheel spin across a driven axle.
132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ESP Indicator Light The “ESP Indicator Light” located in the instrument cluster, starts to flash as soon as the tires lose traction and the ESP system becomes active. If the “ESP Indicator Light” begins to flash during acceleration, ease up on the accelerator and apply as little throttle as possible. Be sure to adapt your speed and driving to the prevailing road conditions.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Full On This is the normal operating mode for ESP. Whenever the vehicle is started the ESP system will be in this “On” mode. This mode should be used for most driving situations. ESP should only be turned to “Partial Off” for specific reasons as noted below. Partial Off This mode is entered by momentarily depressing the ESP OFF switch.
134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: • The “ESP Indicator Light” and the “ESP/BAS Warning Light” come on momentarily each time the ignition switch is turned ON. The HomeLink威 buttons that are located in the headliner or sun visor designate the three different HomeLink威 channels. • Each time the ignition is turned ON, the ESP System will be ON even if it was turned off previously. • The ESP Control System will make buzzing or clicking sounds when it is active.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 135 WARNING! WARNING! Your motorized door or gate will open and close while you are training the Universal Transceiver. Do not train the transceiver if people or pets are in the path of the door or gate. Only use this transceiver with a garage door opener that has a “stop and reverse” feature as required by Federal safety standards. This includes most garage door opener models manufactured after 1982.
136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Your vehicle should be parked outside of the garage when programming. 1. Turn the ignition switch to the ON/RUN position. 2. Hold the battery side of the hand-held transmitter away from the HomeLink威 button you wish to program. Place the hand-held transmitter 1–3 in (3-8 cm) away from the HomeLink威 button you wish to program while keeping the indicator light in view. 3.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 If the indicator light blinks rapidly for two seconds, and then turns to a constant light, continue with programming for a Rolling Code. 5. PROGRAMMING A ROLLING CODE SYSTEM At the garage door opener motor (in the garage), locate the “Learn” or “Training” button. 3 This can usually be found where the hanging antenna wire is attached to the garage door opener motor (it is NOT the button normally used to open and close the door).
138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: There are 30 seconds in which to initiate the next step after the “Learn” button has been pressed. 7. Return to the vehicle and press the programmed HomeLink威 button twice (holding the button for two seconds each time). If the device is plugged in and activates, programming is complete. If the device does not activate, press the button a third time (for two seconds) to complete the training.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139 has successfully accepted the frequency signal. The indicator light will flash slowly and then rapidly when fully trained. Reprogramming A Single HomeLink姞 Button To re-program a channel that has been previously trained, follow these steps: If you unplugged the device for training, plug it back in at this time. 1. Turn the ignition switch to the ON/RUN position. Then proceed with Step 4 under “Programming HomeLink威” earlier in this section.
140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The HomeLink威 Universal Transceiver is disabled when the Vehicle Security Alarm is active. Troubleshooting Tips If you are having trouble programming HomeLink威, here are some of the most common solutions: • Replace the battery in the original transmitter. • Press the “Learn” button on the Garage Door Opener to complete the training for a Rolling Code.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE POWER SUNROOF — IF EQUIPPED The power sunroof switch is located in the reading light. 141 WARNING! • Never leave unattended children in a vehicle, with the key in the ignition switch. Occupants, particularly unattended children, can become entrapped by the power sunroof while operating the power sunroof switch. Such entrapment may result in serious injury or death. • In an accident, there is a greater risk of being thrown from a vehicle with an open sunroof.
142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Opening Sunroof — Manual To open the sunroof, press and hold the switch rearward to full open. Any release of the switch will stop the movement, and the sunroof will remain in a partial open condition until the switch is pushed and held rearward again. Opening Sunroof — Express Mode By pressing the switch rearward and releasing, the sunroof will fully open from any position and stop at the end of travel automatically. This is called Express Open.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Pinch Protect Override If a known obstruction (ice, debris, etc.) prevents closing, press the switch forward and hold it for two seconds after the reversal occurs. This allows the sunroof to move toward the close position. NOTE: Pinch protection is disabled while the switch is pressed. Venting Sunroof — Express Press and release the “V” button, and the sunroof will open to the vent position.
144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Sunroof Maintenance Use only a non-abrasive cleaner and a soft cloth to clean the glass panel. Ignition Off Operation NOTE: Due to overload protection, the inverter will shut down if the power rating is exceeded. WARNING! The sunroof will also operate up to 45 seconds after the ignition has been turned OFF. The sunroof operation will be canceled if either of the front doors are opened during the accessory delay time or set accessory delay time.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 145 3 Power Outlet 12 Volts Power Outlet — 115 Volts (150 Watts)
146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Electrical Outlet Use With Engine Off CONSOLE FEATURES CAUTION! WARNING! • Many accessories that can be plugged in draw power from the vehicle’s battery, even when not in use (i.e., cellular phones, etc.). Eventually, if plugged in long enough, the vehicle’s battery will discharge sufficiently to degrade battery life and/or prevent engine starting. Do not operate this vehicle with the console compartment lid in the open position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 147 NOTE: The flip pocket and console lid features are intended to be used in the upright or open position only while the vehicle is parked. While driving, all hand-held devices should be properly stowed, and the flip pocket and the console lid should be closed. CARGO AREA FEATURES Floor Console A 115 Volt outlet to power small electronics is on the console and is standard on all models except the SE model.
148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To operate the flashlight, press the switch once for high, twice for low, and a third time to return to off.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149 Tonneau Cover — If Equipped The cargo area trim panels include two notches for mounting the available tonneau cover that accommodates the reclining rear seat. WARNING! Three-Press Switch In an accident a cargo cover loose in the vehicle could cause injury. It could fly around in a sudden stop and strike someone in the vehicle. Do not store the cargo cover on the cargo floor or in the passenger compartment.
150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Removable Load Floor The cargo area load floor is removable and can be washed with mild soap and water. Cargo Tie-Down Loops There are two D-rings installed on the D-pillars for securing a net across the liftgate opening. WARNING! • Cargo tie-down loops are not safe anchors for a child seat tether strap. In a sudden stop or collision a loop could pull loose and allow the child seat to come loose. A child could be badly injured.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Always place cargo evenly on the cargo floor. Put heavier objects as low and as far forward as possible. • Place as much cargo as possible in front of the rear axle. Too much weight or improperly placed weight over or behind the rear axle can cause the rear of the vehicle to sway. Fold Down Speakers – If Equipped When the liftgate is open, the speakers can swing down off the trim panel to face rearward, for tailgating and other activities.
152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE REAR WINDOW FEATURES Rear Window Wiper/Washer A switch on the right side of the steering column controls operation of the rear wiper/washer function. Rotating the center of the switch forward to the ON position will activate the wiper. The rear wiper operates in an intermittent mode only. Rotating the center of the switch all the way forward will turn on the wash function. The wash pump will continue to operate as long as the button is pressed.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Adding Washer Fluid The fluid reservoir for the windshield washers and the rear window washer (if equipped) is shared. It is located in the front of the engine compartment on the passenger side and should be checked for fluid level at regular intervals. Fill the reservoir with windshield washer solvent (not radiator antifreeze) and operate the system for a few seconds to flush out the residual water.
154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE COOLED BEVERAGE STORAGE BIN/GLOVE COMPARTMENT — IF EQUIPPED NOTE: The use of the Cooled Beverage Storage Bin is for non-perishable beverages only. The upper storage bin door swings upward to present the contents of the long shallow bin that can store items out of sight. Beneath this bin is the glove compartment. The large glove compartment door swings downward on dampened hinges and features two levels of storage.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 155 3 Positioning Slide Control Slide Control Movement Vehicles without air conditioning can use that space for storage. The lower bin holds the Owner’s Manual and other important documents. Another storage bin is located on the outboard side of the steering wheel and can hold small items like parking cards for easy access.
UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS 䡵 Instrument Panel Features . . . . . . . . . . . . . . . . . 161 ▫ Average Fuel Economy . . . . . . . . . . . . . . . . . 178 䡵 Instrument Cluster — Base . . . . . . . . . . . . . . . . 162 ▫ Distance To Empty (DTE) . . . . . . . . . . . . . . . 179 䡵 Instrument Cluster — Premium . . . . . . . . . . . . . 163 ▫ Elapsed Time . . . . . . . . . . . . . . . . . . . . . . . . 179 䡵 Instrument Cluster Descriptions . . . . . . . . . . . .
158 UNDERSTANDING YOUR INSTRUMENT PANEL 䡵 Radio General Information . . . . . . . . . . . . . . . . 185 ▫ Radio Broadcast Signals . . . . . . . . . . . . . . . . . 185 ▫ Two Types Of Signals . . . . . . . . . . . . . . . . . . 185 ▫ Electrical Disturbances . . . . . . . . . . . . . . . . . . 186 ▫ AM Reception . . . . . . . . . . . . . . . . . . . . . . . 186 ▫ FM Reception . . . . . . . . . . . . . . . . . . . . . . . . 186 䡵 Electronic Digital Clock . . . . . . . . . . . . . . . . . .
UNDERSTANDING YOUR INSTRUMENT PANEL ▫ Changing Tape Direction . . . . . . . . . . . . . . . . 201 ▫ Metal Tape Selection . . . . . . . . . . . . . . . . . . . 201 ▫ Pinch Roller Release . . . . . . . . . . . . . . . . . . . 201 ▫ Noise Reduction . . . . . . . . . . . . . . . . . . . . . . 201 ▫ Operating Instructions - (CD Mode For CD Audio Play) . . . . . . . . . . . . . . . . . . . . . . . . . 201 ▫ Load/Eject Button (CD Mode For CD Audio Play) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
160 UNDERSTANDING YOUR INSTRUMENT PANEL ▫ PTY Button Seek . . . . . . . . . . . . . . . . . . . . . . 216 䡵 CD/DVD Disc Maintenance . . . . . . . . . . . . . . . 218 ▫ Satellite Antenna . . . . . . . . . . . . . . . . . . . . . . 216 䡵 Radio Operation And Cellular Phones . . . . . . . . 219 ▫ Reception Quality . . . . . . . . . . . . . . . . . . . . . 216 䡵 Climate Controls . . . . . . . . . . . . . . . . . . . . . . . 219 䡵 Remote Sound System Controls — If Equipped . . 217 ▫ Climate Controls . .
UNDERSTANDING YOUR INSTRUMENT PANEL 161 INSTRUMENT PANEL FEATURES 4
162 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER — BASE
UNDERSTANDING YOUR INSTRUMENT PANEL 163 INSTRUMENT CLUSTER — PREMIUM 4
164 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER DESCRIPTIONS 1. Fuel Gauge When the ignition switch is in the ON position, the pointer will show the level of fuel remaining in the fuel tank. 2. Fuel Door Indicator This indicates that the Fuel Filler Door is located on the left side of the vehicle. 3. Temperature Gauge The temperature gauge shows engine coolant temperature. Any reading below the red area of the gauge shows that the engine cooling system is operating properly.
UNDERSTANDING YOUR INSTRUMENT PANEL 5. Tachometer The white area of the scale shows the permissible engine revolutions-per-minute (RPM x 1000) for each gear range. Before reaching the red area, ease up on the accelerator to prevent engine damage. 6. Low Fuel Light When the fuel level drops to two gallons, the fuel symbol will light and a single chime will sound. 7. Charging System Light This light shows the status of the electrical charging system.
166 UNDERSTANDING YOUR INSTRUMENT PANEL 11. Oil Pressure Light Shows low engine oil pressure. The light will come on and remain on when the ignition switch is turned from the OFF to the ON position, and the light will turn off after the engine is started. If the bulb does not come on during starting, have the system checked by an authorized dealer. If the light comes on and remains on while driving, stop the vehicle and shut off the engine. DO NOT OPERATE THE VEHICLE UNTIL THE CAUSE IS CORRECTED.
UNDERSTANDING YOUR INSTRUMENT PANEL that illuminates a low tire pressure telltale when one or more of your tires is significantly under-inflated. Accordingly, when the low tire pressure telltale illuminates, you should stop and check your tires as soon as possible, and inflate them to the proper pressure. Driving on a significantly under-inflated tire causes the tire to overheat and can lead to tire failure.
168 UNDERSTANDING YOUR INSTRUMENT PANEL CAUTION! The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and warning have been established for the tire size equipped on your vehicle. Undesirable system operation or sensor damage may result when using replacement equipment that is not of the same size, type, and/or style. Aftermarket wheels can cause sensor damage.
UNDERSTANDING YOUR INSTRUMENT PANEL 169 indicator system is duty cycle based, which means the engine oil change interval may fluctuate dependent upon your personal driving style. NOTE: If the indicator message illuminates when you start the vehicle, the oil change indicator system did not reset. If necessary, repeat this procedure. Unless reset, this message will continue to display each time you turn the ignition switch to the ON/RUN position.
170 UNDERSTANDING YOUR INSTRUMENT PANEL If the MIL flashes when the engine is running, serious conditions may exist that could lead to immediate loss of power or severe catalytic converter damage. The vehicle should be serviced as soon as possible if this occurs. 17. Cruise Indicator — If Equipped This indicator shows that the Speed Control system is ON. 18. Odometer/Trip Odometer Reset Knob Press this button to change the display from odometer to either of the two trip odometer settings.
UNDERSTANDING YOUR INSTRUMENT PANEL 20. Electronic Stability Program (ESP) Indicator Light/Traction Control System (TCS) Indicator Light — If Equipped If this indicator light flashes during acceleration, apply as little throttle as possible. While driving, ease up on the accelerator. Adapt your speed and driving to the prevailing road conditions, and do not switch off the ESP, or TCS — if equipped. 21.
172 UNDERSTANDING YOUR INSTRUMENT PANEL When lit solid: There is an AWD system fault. AWD performance will be at a reduced level. Service the AWD system soon. If the ABS light is on, the brake system should be serviced as soon as possible to restore the benefit of Anti-Lock Brakes. When blinking: The AWD system is temporarily disabled due to overload condition. The warning light should be checked frequently to assure that it is operating properly.
UNDERSTANDING YOUR INSTRUMENT PANEL parking brake is applied, there is a low brake fluid level or there is a problem with the Anti-Lock Brake System (ABS). The dual brake system provides a reserve braking capacity in the event of a failure to a portion of the hydraulic system. Failure of either half of the dual brake system is indicated by the Brake System Warning Light which will turn on when the brake fluid level in the master cylinder has dropped below a specified level.
174 UNDERSTANDING YOUR INSTRUMENT PANEL turn off unless the parking brake is applied or a brake fault is detected. If the light does not illuminate, have the light inspected by an authorized dealer. The Brake System Warning Light will also turn on when the parking brake is applied with the ignition switch in the ON position. NOTE: This light shows only that the parking brake is applied. It does not show the degree of brake application. 28.
UNDERSTANDING YOUR INSTRUMENT PANEL ELECTRONIC VEHICLE INFORMATION CENTER (EVIC) — If Equipped 175 The Electronic Vehicle Information Center (EVIC) features a driver-interactive display. It is located in the lower left part of the cluster below the fuel and engine temperature gauge.
176 UNDERSTANDING YOUR INSTRUMENT PANEL When the appropriate conditions exist, the EVIC displays the following messages.
UNDERSTANDING YOUR INSTRUMENT PANEL 177 indicator system is duty cycle based, which means the engine oil change interval may fluctuate dependent upon your personal driving style. NOTE: If the indicator message illuminates when you start the vehicle, the oil change indicator system did not reset. If necessary, repeat this procedure. Unless reset, this message will continue to display each time you turn the ignition switch to the ON/RUN position.
178 UNDERSTANDING YOUR INSTRUMENT PANEL Press the EVIC button until one of the following functions are displayed on the EVIC: • Compass/Temperature/Audio • Average Fuel Economy • Distance To Empty (DTE) • Elapsed Time • Tire Pressure Monitor (TPM) • Personal Settings To Reset The Display Pressing and holding the EVIC button once will clear the function currently being displayed. Reset will only occur if a resettable function is currently being displayed.
UNDERSTANDING YOUR INSTRUMENT PANEL Distance To Empty (DTE) Shows the estimated distance that can be travelled with the fuel remaining in the tank. This estimated distance is determined by a weighted average of the instantaneous and average fuel economy, according to the current fuel tank level. This is not resettable. NOTE: Significant changes in driving style or vehicle loading will greatly affect the actual drivable distance of the vehicle, regardless of the DTE displayed value.
180 UNDERSTANDING YOUR INSTRUMENT PANEL Use the EVIC button to display one of the following choices: Language When in this display you may select different languages for all display nomenclature, including the trip functions. Pressing the EVIC button while in this display selects English, Espanol, or Francais depending on availability. As you continue, the displayed information will be shown in the selected language. NOTE: UConnect威 language will not change using the EVIC.
UNDERSTANDING YOUR INSTRUMENT PANEL Sound Horn with Remote Key Lock When ON is selected, a short horn sound will occur when the RKE transmitter LOCK button is pressed. This feature may be selected with or without the flash lights on lock/unlock feature. Press and hold the EVIC button when in this display until “ON” or “OFF” appears to make your selection.
182 UNDERSTANDING YOUR INSTRUMENT PANEL Delay Power Off to Accessories Until Exit When this feature is selected, the power window switches, radio, hands–free system, power sunroof, and power outlets will remain active for up to 60 minutes after the ignition switch has been turned off. Opening a vehicle door will cancel this feature. Press and hold the EVIC button when in this display until “OFF”, “45 sec.”, “5 min.”, or “10 min.” appears to make your selection.
UNDERSTANDING YOUR INSTRUMENT PANEL 183 Setting The Compass Variance And Compass Calibration Compass Variance Compass Variance is the difference between magnetic North and geographic North. In some areas of the country, the difference between magnetic and geographic North is great enough to cause the compass to give false readings. In order to ensure compass accuracy, the compass variance should be set to the zone number on the compass variance map that corresponds to the current location of the vehicle.
184 UNDERSTANDING YOUR INSTRUMENT PANEL To Set the Variance: with the ignition in the ON position, with a short button press (less than one second) press and release the EVIC button several times until you have displayed the “Personal Settings (CustomerProgrammable Features)” menu. Once in the “Personal Settings (Customer-Programmable Features)” menu, press and release (less than one second) the EVIC button several times until “Compass Variance” is highlighted.
UNDERSTANDING YOUR INSTRUMENT PANEL Settings (Customer-Programmable Features)” menu, press and release (less than one second) the EVIC button several times until “Calibrate Compass (Yes)” is displayed. Using a long button press (more than one second), pressing the EVIC button will place the Compass in calibration mode. The CAL indicator will come on continuously in the EVIC display to indicate that the compass is now in the calibration mode and that the vehicle can now be driven to calibrate.
186 UNDERSTANDING YOUR INSTRUMENT PANEL Electrical Disturbances Radio waves may pick up electrical disturbances during transmission. They mainly affect the wave amplitude, and thus remain a part of the AM reception. They interfere very little with the frequency variations that carry the FM signal. AM Reception AM sound is based on wave amplitude, so AM reception can be disrupted by such things as lightning, power lines and neon signs.
UNDERSTANDING YOUR INSTRUMENT PANEL Clock Setting Procedure 1. Press and hold the TIME button until the hours blink. 2. Adjust the hours by turning the TUNE/AUDIO control knob. 187 SALES CODE REF — AM/FM/CD (SINGLE DISC) RADIO WITH OPTIONAL SATELLITE RADIO AND HANDS FREE PHONE CAPABILITY NOTE: The radio sales code is located on the lower right side of your radio faceplate. 3. After the hours are adjusted, push the TUNE/AUDIO control knob to set the minutes. 4 4.
188 UNDERSTANDING YOUR INSTRUMENT PANEL Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/Volume Control (Rotary) Press the ON/VOL control to turn the radio ON. Press the ON/VOL a second time to turn OFF the radio. Electronic Volume Control The electronic volume control turns continuously (360 degrees) in either direction without stopping.
UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: In Hands-Free Phone (if equipped) mode, the MUTE button mutes the microphone. SCAN Button (Radio Mode) Pressing the SCAN button causes the tuner to search for the next listenable station in either, AM, FM, or Satellite (if equipped) frequencies, pausing for five seconds at each listenable station before continuing to the next. To stop the search, press SCAN a second time.
190 UNDERSTANDING YOUR INSTRUMENT PANEL TUNE Control (Radio Mode) Turn the rotary TUNE control clockwise to increase or counterclockwise to decrease the frequency. Press the rotary TUNE control a fourth time and BAL will display. Turn the TUNE control to the right or left to adjust the sound level from the right or left side speakers. AM/FM Button (Radio Mode) Press the button to select AM or FM modes. Press the rotary TUNE control a fifth time and FADE will display.
UNDERSTANDING YOUR INSTRUMENT PANEL selected within five seconds after pressing the SET button, the station will continue to play but will not be stored into pushbutton memory. You may add a second station to each pushbutton by repeating the above procedure with this exception: Press the SET button twice and SET 2 will show in the display window. Each button can be set for SET 1 and SET 2 in both AM and FM.
192 UNDERSTANDING YOUR INSTRUMENT PANEL • If you insert a disc with the ignition ON and the radio OFF, the CD will automatically be pulled into the CD player. SCAN Button (CD Mode) Press this button to play the first 10 seconds of each track. To stop the scan function, press the button a second time. • This radio does not play discs with MP3 tracks. EJECT Button (CD Mode) Press this button and the disc will unload and move to the entrance for easy removal.
UNDERSTANDING YOUR INSTRUMENT PANEL Press and hold the FF button to fast forward through the tracks. Release the FF button to stop the fast forward feature. If the RW button is pressed, the current track will reverse to the beginning of the track and begin playing. RND/SET Button (Random Play Button) (CD Mode) Press this button while the CD is playing to activate Random play. This feature plays the selections on the compact disc in random order to provide an interesting change of pace.
194 UNDERSTANDING YOUR INSTRUMENT PANEL MUTE Button (Auxiliary Mode) Press the MUTE button to cancel the sound from the speakers. ⬙MUTE⬙ will display. Press the MUTE button a second time and the sound from the speakers will return. Rotating the volume control or turning off the ignition will also return the sound from the speakers. SCAN Button (Auxiliary Mode) No function. EJECT Button (Auxiliary Mode) No function. PSCAN Button (Auxiliary Mode) No function.
UNDERSTANDING YOUR INSTRUMENT PANEL 195 Operating Instructions - Satellite Radio — If Equipped Refer to the “Satellite Radio” section of this Owner’s Manual. SALES CODE RAK – AM/FM/CASSETTE/CD (6-DISC) RADIO WITH OPTIONAL SATELLITE RADIO, HANDS FREE PHONE, VIDEO, MP3, and WMA CAPABILITIES 4 NOTE: The radio sales code is located on the lower right side of your radio faceplate. RAK Radio Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio.
196 UNDERSTANDING YOUR INSTRUMENT PANEL Power Switch/Volume Control (Rotary) Press the ON/VOL control to turn the radio ON. Press the ON/VOL a second time to turn OFF the radio. Electronic Volume Control The electronic volume control turns continuously (360 degrees) in either direction without stopping. Turning the volume control to the right increases the volume and to the left decreases it. When the audio system is turned on, the sound will be set at the same volume level as last played.
UNDERSTANDING YOUR INSTRUMENT PANEL Clock Setting Procedure 197 2. Adjust the hours by turning the right side Tune/ Audio control. RW/FF (Radio Mode) Pressing the rewind/fast forward button causes the tuner to search for the next frequency in the direction of the arrows. This feature operates in either AM, FM or Satellite (if equipped) frequencies. 3. After the hours are adjusted, press the right side Tune/Audio control to set the minutes. The minutes will begin to blink.
198 UNDERSTANDING YOUR INSTRUMENT PANEL Press the rotary TUNE control a third time and TREBLE will display. Turn the TUNE control to the right or left to increase or decrease the Treble tones. knob within five seconds will allow the program format type to be selected. Many radio stations do not currently broadcast PTY information. Press the rotary TUNE control a fourth time and BAL will display. Turn the TUNE control to the right or left to adjust the sound level from the right or left side speakers.
UNDERSTANDING YOUR INSTRUMENT PANEL Program Type Oldies Soft Nostalgia Jazz Classical Rhythm and Blues Soft Rhythm and Blues Foreign Language Religious Music Religious Talk Personality Public College Unassigned Weather 16 Digit-Character Display Oldies Soft Nostalgia Jazz Classical Rhythm_and_Blues Soft_R_&_B Foreign_Language Religious_Music Religious_Talk Personality Public College Weather 199 By pressing the SEEK button when the PTY icon is displayed, the radio will be tuned to the next frequency stat
200 UNDERSTANDING YOUR INSTRUMENT PANEL Operating Instructions — Tape Player Insert the cassette with the exposed tape side toward the left and the mechanical action of the player will gently pull the cassette into the play position. NOTE: When subjected to extremely cold temperatures, the tape mechanism may require a few minutes to warm up for proper operation. Sometimes poor playback may be experienced due to a defective cassette tape. Clean and demagnetize the tape heads at least twice a year.
UNDERSTANDING YOUR INSTRUMENT PANEL SCAN Button Press this button to play 10 seconds of each selection. Press the SCAN button a second time to cancel the feature. Changing Tape Direction If you wish to change the direction of tape travel (side being played), press Preset 6. The lighted arrow in the display window will show the new direction. Metal Tape Selection If a standard metal tape is inserted into the player, the player will automatically select the correct equalization.
202 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: This Radio is capable of playing compact discs (CD), recordable compact discs (CD-R), rewritable compact discs (CD-RW) compact discs with MP3 tracks and multisession compact discs with CD and MP3 tracks and WMA. Inserting Compact Disc(s) CAUTION! This CD player will accept 4 3/4 inch (12 cm) discs only. The use of other sized discs may damage the CD player mechanism. You may eject a disc with the radio OFF.
UNDERSTANDING YOUR INSTRUMENT PANEL 203 LOAD/EJECT Button (CD Mode for CD Audio Play) Radio display will show ⬙EJECTING DISC⬙ when the disc is being ejected and prompt the user to remove the disc. LOAD/EJECT - Load Press the LOAD/EJT button and the pushbutton with the corresponding number where the CD is being loaded. The radio will display PLEASE WAIT and prompt when to INSERT DISC. After the radio displays ⬙INSERT DISC,⬙ insert the CD into the player.
204 UNDERSTANDING YOUR INSTRUMENT PANEL RW/FF (CD Mode for CD Audio Play) Press and hold FF (Fast Forward) and the CD player will begin to fast forward until FF is released or RW or another CD button is pressed. The RW (Reverse) button works in a similar manner. Press and hold the FF button to fast forward through the tracks. Release the FF button to stop the fast forward feature. If the RW button is pressed, the current track will reverse to the beginning of the track and begin playing.
UNDERSTANDING YOUR INSTRUMENT PANEL Notes On Playing MP3 Files The radio can play MP3 files; however, acceptable MP3 file recording media and formats are limited. When writing MP3 files, pay attention to the following restrictions. Supported Media (Disc Types) The MP3 file recording media supported by the radio are CD-ROM, CD-R, and CD-RW. Supported Medium Formats (File Systems) The medium formats supported by the radio are ISO 9660 Level 1 and Level 2 and includes the Joliet extension.
206 UNDERSTANDING YOUR INSTRUMENT PANEL Supported MP3 File Formats The radio will recognize only files with the *.mp3 extension as MP3 files. Non-MP3 files named with the *.mp3 extension may cause playback problems. The radio is designed to recognize the file as an invalid MP3 and will not play the file. When using the MP3 encoder to compress audio data to an MP3 file, the bit rate and sampling frequencies in the following table are supported. In addition, variable bit rates (VBR) are also supported.
UNDERSTANDING YOUR INSTRUMENT PANEL Playback of MP3 and WMA Files When a medium containing MP3 data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the MP3 files.
208 UNDERSTANDING YOUR INSTRUMENT PANEL The radio display will show ⬙LOADING DISC⬙ when the disc is loading. LOAD/EJT - Eject Press the LOAD/EJT button and the pushbutton with the corresponding number where the CD was loaded and the disc will unload and move to the entrance for easy removal. Radio display will show ⬙EJECTING DISC⬙ when the disc is being ejected and prompt the user to remove the disc. If you have ejected a disc and have not removed it within 15 seconds, it will be reloaded.
UNDERSTANDING YOUR INSTRUMENT PANEL AM/FM Button (CD Mode for MP3 Play) Switches back to Radio mode. RND/PTY Button (CD Mode for MP3 Play) Pressing this button plays files randomly. SET/DIR Button (CD Mode for MP3 Play) Press the SET/DIR Button to display folders, when playing an MP3 discs that have a file/folder structure. Turn the TUNE control to display available folders or move through available folders. Press the TUNE control to select a folder.
210 UNDERSTANDING YOUR INSTRUMENT PANEL SALES CODE REC — AM/FM/CD (6–DISC) RADIO WITH NAVIGATION SYSTEM menus and instructions for selecting a variety of destinations and routes, AM/FM stereo radio and six-disc CD changer with MP3 capability. Mapping information for navigation is supplied on a DVD that is loaded into the unit. One map DVD covers all of North America. Refer to your “Navigation User’s Manual” for detailed operating instructions.
UNDERSTANDING YOUR INSTRUMENT PANEL the worldwide standard for time. This makes the system’s clock very accurate once the appropriate time zone and daylight savings information is set. 1. At the Main Menu screen, highlight “Clock Setup” and press ENTER OR press and hold for three seconds the TIME button on the unit’s faceplate. The Clock Setup screen appears. 211 2. To show the GPS clock, select “Displayed Clock: GPS Clock” and press ENTER. 3. To adjust the time zone, Select “Time Zone” and press ENTER.
212 UNDERSTANDING YOUR INSTRUMENT PANEL 1. At the Clock Setup screen highlight “Displayed Clock: User Defined Clock”. 3. To decrease the clock by one hour, use the Select Encoder to highlight the “-” sign. Press ENTER. Press ENTER again to decrease the clock by another hour. 4. To increase the clock by minutes, make sure “MIN +” is highlighted and press ENTER. Press ENTER again to increase the clock by another minute. 5. To decrease the clock by minutes, use the Select Encoder to highlight the “-“ sign.
UNDERSTANDING YOUR INSTRUMENT PANEL SATELLITE RADIO — IF EQUIPPED Satellite radio uses direct satellite to receiver broadcasting technology to provide clear digital sound, coast to coast. The subscription service provider is Sirius™ Satellite Radio. This service offers over 130 channels of music, sports, news, entertainment, and programming for children, directly from its satellites and broadcasting studios. NOTE: Sirius service is not available in Hawaii and has limited coverage in Alaska.
214 UNDERSTANDING YOUR INSTRUMENT PANEL press the SEEK UP button until all 12 ESN/SID digits display. The SEEK DOWN will page down until the first four digits display. The radio will exit the ESN/SID mode when any other button is pushed, the ignition is turned OFF, or five minutes have passed since any button was pushed. ESN/SID Access with RAQ and RAK Radios With the ignition switch in the ACC position and the radio OFF, press the CD Eject and TIME buttons simultaneously for three seconds.
UNDERSTANDING YOUR INSTRUMENT PANEL A CD or tape may remain in the radio while in the Satellite radio mode. Selecting A Channel Press and release the SEEK or TUNE knob to search for the next channel. Press the top of the button to search up and the bottom of the button to search down. Holding the TUNE button causes the radio to bypass channels until the button is released. Press and release the SCAN button (if equipped) to automatically change channels every seven seconds.
216 UNDERSTANDING YOUR INSTRUMENT PANEL one and stop the search. Pressing a preset memory button during a music type scan will call up the memory channel and stop the search. Reception Quality Satellite reception may be interrupted due to one of the following reasons: PTY Button SEEK When the desired program is obtained, press the SEEK button within five seconds. The channel will change to the next channel that matches the program type selected.
UNDERSTANDING YOUR INSTRUMENT PANEL REMOTE SOUND SYSTEM CONTROLS — IF EQUIPPED The remote sound system controls are located on the rear surface of the steering wheel. Reach behind the wheel to access the switches. 217 The right-hand control is a rocker type switch with a pushbutton in the center. Pressing the top of the switch will increase the volume and pressing the bottom of the switch will decrease the volume.
218 UNDERSTANDING YOUR INSTRUMENT PANEL The button located in the center of the left-hand control will tune to the next preset station that you have programmed in the radio preset pushbuttons. CD Player Press the top of the switch once to go to the next track on the CD. Press the bottom of the switch once to go to the beginning of the current track or to the beginning of the previous track, if it is within one second after the current track begins to play.
UNDERSTANDING YOUR INSTRUMENT PANEL 219 RADIO OPERATION AND CELLULAR PHONES Under certain conditions, the cellular phone being ON in your vehicle can cause erratic or noisy performance from your radio. This condition may be lessened or eliminated by relocating the cellular phone antenna. This condition is not harmful to the radio.
220 UNDERSTANDING YOUR INSTRUMENT PANEL The controls are as follows: Mode Control (Air Direction) The mode control allows you to choose from several patterns of air distribution. You can select either a primary mode, as identified by the symbols, or a blend of two of these modes. The closer the control is to a particular mode, the more air distribution you receive from that mode. Panel Air is directed through the outlets in the instrument panel. These outlets can be adjusted to direct air flow.
UNDERSTANDING YOUR INSTRUMENT PANEL 221 Defrost Air is directed through the windshield and side window demister outlets. Use this mode with maximum fan and temperature settings for best windshield and side window defrosting. NOTE: For maximum airflow to the rear seat passengers, the center instrument panel outlets can be aimed, so that the left center outlet is directed toward the right rear passenger and the right center outlet is directed toward the left rear passenger.
222 UNDERSTANDING YOUR INSTRUMENT PANEL Temperature Control Circulation Control Use this control to regulate the temperature of the air inside the passenger compartment. The blue area of the scale indicates cooler temperatures while the red area indicates warmer temperatures. NOTE: If your air conditioning performance seems lower than expected, check the front of the A/C condenser, located in front of the radiator, for an accumulation of dirt or insects.
UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: Recirculation Mode will not operate in floor, mix or defrost modes. Air Conditioning (Normal) Use this button to engage the Air Conditioning. A light will illuminate when the Air Conditioning System is engaged. NOTE: The air conditioning compressor will not engage until the engine has been running for about 10 seconds. 223 Air Conditioning (MAX A/C) For maximum cooling select the air direction to either the Panel or Bi-Level position using the mode control.
224 UNDERSTANDING YOUR INSTRUMENT PANEL Air Filtration System – If Equipped An air filter is included in the optional Security Group. Filter media includes a particle filtration layer and a charcoal layer. The filter will reduce, but not eliminate, diesel and agricultural smells. The filter acts only on air coming from outside the vehicle; it does not filter air inside the passenger compartment.. The air filter change interval coincides with engine oil and filter change intervals.
UNDERSTANDING YOUR INSTRUMENT PANEL 225 Operating Tips 4
226 UNDERSTANDING YOUR INSTRUMENT PANEL Window Fogging Vehicle side windows tend to fog on the inside in mild rainy or humid weather. To clear the windows, set mode to the mix or defrost position. Direct the panel outlets toward the side windows. Do not use recirculate without A/C for long periods as fogging may occur. Interior fogging on the windshield can be quickly removed by using the defrost position. If the fogging problem persists, clean the inside window surfaces.
UNDERSTANDING YOUR INSTRUMENT PANEL Side Window Demisters A side window demister outlet is at each end of the instrument panel. These nonadjustable outlets direct air toward the side windows when the system is in either the FLOOR, MIX, or DEFROST mode. The air is directed at the area of the windows through which you view the outside mirrors.
STARTING AND OPERATING CONTENTS 䡵 Starting Procedures . . . . . . . . . . . . . . . . . . . . . 233 ▫ Brake/Transmission Interlock System . . . . . . . 237 ▫ Manual Transmission . . . . . . . . . . . . . . . . . . 233 ▫ Automatic Transaxle Ignition Interlock System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237 ▫ Automatic Transmission . . . . . . . . . . . . . . . . 233 ▫ Normal Starting . . . . . . . . . . . . . . . . . . . . . . 233 ▫ Extremely Cold Weather (Below ⫺20°F Or ⫺29°C) . . .
230 STARTING AND OPERATING ▫ Downshifting . . . . . . . . . . . . . . . . . . . . . . . . 243 䡵 Tire Safety Information . . . . . . . . . . . . . . . . . . . 254 䡵 All Wheel Drive System — If Equipped . . . . . . . 244 ▫ Tire Markings . . . . . . . . . . . . . . . . . . . . . . . . 254 䡵 Parking Brake . . . . . . . . . . . . . . . . . . . . . . . . . 244 ▫ Tire Identification Number (TIN) . . . . . . . . . . 257 䡵 Brake System . . . . . . . . . . . . . . . . . . . . . . . . . .
STARTING AND OPERATING 231 ▫ Replacement Tires . . . . . . . . . . . . . . . . . . . . . 269 ▫ Gasoline/Oxygenate Blends . . . . . . . . . . . . . . 282 ▫ Alignment And Balance . . . . . . . . . . . . . . . . . 270 ▫ MMT In Gasoline . . . . . . . . . . . . . . . . . . . . . 282 䡵 Tire Pressure Monitoring System (TPMS) — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . . . 271 ▫ Materials Added To Fuel . . . . . . . . . . . . . . . . 283 ▫ Base System — If Equipped . . . . . . . . . .
232 STARTING AND OPERATING ▫ Trailer Hitch Classification . . . . . . . . . . . . . . . 290 ▫ Towing Tips . . . . . . . . . . . . . . . . . . . . . . . . . 298 ▫ Trailer Towing Weights (Maximum Trailer Weight Ratings) . . . . . . . . . . . . . . . . . . . . . . 291 䡵 Recreational Towing (Behind Motorhome, Etc.) . . 299 ▫ Trailer And Tongue Weight . . . . . . . . . . . . . . 291 ▫ Towing Requirements . . . . . . . . . . . . . . . . . .
STARTING AND OPERATING STARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust both inside and outside mirrors, and fasten your seat belts. WARNING! Never leave children alone in a vehicle. Leaving unattended children in a vehicle is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Don’t leave the key in the ignition. A child could operate power windows, other controls, or move the vehicle.
234 STARTING AND OPERATING start within 15 seconds, turn the ignition switch to the OFF position, wait 10 to 15 seconds, then repeat the normal starting procedure. WARNING! Do not attempt to push or tow your vehicle to get it started. Vehicles equipped with an automatic transaxle cannot be started this way. Unburned fuel could enter the catalytic converter and once the engine has started, ignite and damage the converter and vehicle.
STARTING AND OPERATING WARNING! Never pour fuel or other flammable liquid into the throttle body air inlet opening in an attempt to start the vehicle. This could result in flash fire causing serious personal injury. 235 After Starting The idle speed will automatically decrease as the engine warms up. AUTOMATIC TRANSAXLE — IF EQUIPPED 5 CAUTION! To prevent damage to the starter, do not crank the engine for more than 15 seconds at a time. Wait 10 to 15 seconds before trying again.
236 STARTING AND OPERATING sometimes ⬙feel⬙ as if it is slipping, but this is normal and does not harm anything. NOTE: You MUST press and hold the brake pedal down while shifting out of PARK. CAUTION! WARNING! Damage to the transaxle may occur if the following precautions are not observed: It is dangerous to shift the selector lever out of PARK or NEUTRAL if the engine speed is higher than idle speed.
STARTING AND OPERATING Brake/Transmission Interlock System This system prevents you from moving the shift lever out of PARK and into any gear unless the brake pedal is pressed. This system is active only while the ignition switch is in the ON or ACC position. Always depress the brake pedal first, before moving the shift lever out of PARK. NOTE: If a malfunction occurs, the transaxle will not shift out of PARK. Battery power is required to release the brake/transmission interlock system.
238 STARTING AND OPERATING WARNING! Unintended movement of a vehicle could injure those in and near the vehicle. As with all vehicles, you should never exit a vehicle while the engine is running. Before exiting a vehicle, you should always shift the vehicle into PARK, remove the key from the ignition, and apply the parking brake. Once the key is removed from the ignition, the transmission shift lever is locked in the PARK position, securing the vehicle against unwanted movement.
STARTING AND OPERATING REVERSE Shift into this range only after the vehicle has come to a complete stop. NEUTRAL The engine may be started in this range. DRIVE This should be used for most driving and provides the best ratio for optimum drivability, fuel economy, and performance. LOW This range should be used for maximum engine braking when descending steep grades.
240 STARTING AND OPERATING Autostick姞 Operation Autostick威 Shifter NOTE: Autostick威 is not functional until the CVT warms up in cold weather. Autostick威 operation is activated in the DRIVE position by moving the shift lever side-to-side. Moving the shift lever to the (+) side will activate Autostick威 and shift up to the next higher manual ratio, unless you are already operating in or near Overdrive, in which case 6th ratio will be selected.
STARTING AND OPERATING Autostick威 is deactivated: • By holding the shift lever to (+) momentarily • When the shift lever is shifted out of DRIVE • When in 6th position, touching the shift lever to the right • When heavy Anti-Lock Brake System (ABS) application is detected Autostick姞 General Information • If a ratio other than 1st is selected and the vehicle is brought to a stop, the transaxle control logic will automatically select the 1st gear ratio.
242 STARTING AND OPERATING MANUAL TRANSAXLE — IF EQUIPPED WARNING! You or others could be injured if you leave the vehicle unattended without having the parking brake fully applied. The parking brake should always be applied when the driver is not in the vehicle, especially on an incline. Fully depress the clutch pedal before you shift gears. As you release the clutch pedal, lightly depress the accelerator pedal. 5 Speed Shift Pattern Use each gear in numerical order, do not skip a gear.
STARTING AND OPERATING For most city driving, you will find it easier to use only the lower gears. For steady highway driving with light accelerations, 5th gear is recommended. Never drive with your foot resting on the clutch pedal, and never try to hold the vehicle on a hill with the clutch pedal partially engaged. This will cause abnormal wear on the clutch. Never shift into REVERSE until the vehicle has come to a complete stop.
244 STARTING AND OPERATING To maintain a safe speed and prolong brake life, shift down to 2nd or 1st gear when descending a steep grade. When turning a corner or driving up a steep grade, downshift early so that the engine will not be overburdened. All Wheel Drive System — If Equipped This feature provides full time, on-demand All-Wheel Drive (AWD). The system is automatic with no driver gear selection or additional driving skills required.
STARTING AND OPERATING 245 Before leaving the vehicle, make sure that the parking brake is set. To set the parking brake, pull up firmly on the lever. Also, place the shift lever in the PARK position (automatic transmission) or REVERSE position (manual transmission). To release the parking brake, apply the brake pedal, pull up slightly on the lever, then depress the button on the end of the lever and push the lever fully down toward the floor.
246 STARTING AND OPERATING PARK. As an added precaution, turn the front wheels toward the curb on a downhill grade and away from the curb on a uphill grade. You should always apply the parking brake before leaving the vehicle. WARNING! • Never leave children alone in a vehicle. Leaving unattended children in a vehicle is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Don’t leave the key in the ignition.
STARTING AND OPERATING If either of the two hydraulic systems lose normal capability, the remaining system will still function with some loss of overall braking effectiveness. This will be evident by increased pedal travel during application and greater pedal force required to slow or stop. In addition, if the malfunction is caused by an internal leak, as the brake fluid in the master cylinder drops, the brake warning indicator will light. WARNING! Driving a vehicle with the brake light on is dangerous.
248 STARTING AND OPERATING WARNING! • The ABS cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase braking or steering efficiency beyond that afforded by the condition of the vehicle brakes and tires or the traction afforded. • The ABS cannot prevent accidents, including those resulting from excessive speed in turns, following another vehicle too closely, or hydroplaning. Only a safe, attentive, and skillful driver can prevent accidents.
STARTING AND OPERATING 249 When the vehicle is driven over 7 mph (11 km/h), you may also hear a slight clicking sound as well as some related motor noises. These noises are the system performing its self-check cycle to ensure that the ABS working properly. This self-check occurs each time the vehicle is started and accelerated past 7 mph (11 km/h). • a slight drop or fall away of the brake pedal at the end of the stop ABS is activated during braking under certain road or stopping conditions.
250 STARTING AND OPERATING POWER STEERING The standard power steering system will give you good vehicle response and increased ease of maneuverability in tight spaces. The system will provide mechanical steering capability if power assist is lost. If for some reason the power assist is interrupted, it will still be possible to steer your vehicle. Under these conditions, you will observe a substantial increase in steering effort, especially at very low vehicle speeds and during parking maneuvers.
STARTING AND OPERATING DRIVING ON SLIPPERY SURFACES ACCELERATION Rapid acceleration on snow covered, wet, or other slippery surfaces may cause the front wheels to pull erratically to the right or left. This phenomenon occurs when there is a difference in the surface traction under the front (driving) wheels. WARNING! Rapid acceleration on slippery surfaces is dangerous. Unequal traction can cause sudden pulling of the front wheels. You could lose control of the vehicle and possibly have an accident.
252 STARTING AND OPERATING DRIVING THROUGH WATER Driving through water more than a few inches/ centimeters deep will require extra caution to ensure safety and prevent damage to your vehicle. FLOWING/RISING WATER WARNING! Do not drive on, or cross, a road or a path where water is flowing and/or rising (as in storm run-off). Flowing water can wear away the road or path’s surface and cause your vehicle to sink into deeper water. Furthermore, flowing and/or rising water can carry your vehicle away swiftly.
STARTING AND OPERATING 253 CAUTION! WARNING! • Driving through standing water may cause damage to your vehicle’s drivetrain components. Always inspect your vehicle’s fluids (i.e., engine oil, transmission, axle, etc.) for signs of contamination (i.e., fluid that is milky or foamy in appearance) after driving through standing water. Do not continue to operate the vehicle if any fluid appears contaminated, as this may result in further damage.
254 STARTING AND OPERATING TIRE SAFETY INFORMATION TIRE MARKINGS • European Metric tire sizing is based on European design standards. Tires designed to this standard have the tire size molded into the sidewall beginning with the section width. The letter ⬙P⬙ is absent from this tire size designation. Example: 215/65R15 96H. • LT (Light Truck)-Metric tire sizing is based on U.S. design standards.
STARTING AND OPERATING 255 Tire Sizing Chart EXAMPLE: Size Designation: P = Passenger Car tire size based on U.S. design standards ⴖ....blank....ⴖ = Passenger Car tire based on European design standards LT = Light Truck tire based on U.S. design standards T = Temporary spare tire 31 = Overall diameter in inches (in) 215 = Section width in millimeters (mm) 65 = Aspect ratio in percent (%). — Ratio of section height to section width of tire 10.
256 STARTING AND OPERATING EXAMPLE: Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry H = Speed Symbol — A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions — The maximum speed corresponding to the speed symbol should only be achieved under specified operating conditions (i.e.
STARTING AND OPERATING TIRE IDENTIFICATION NUMBER (TIN) The TIN may be found on one or both sides of the tire, however, the date code may only be on one side. Tires with white sidewalls will have the full TIN, including the date code, 257 located on the white sidewall side of the tire. Look for the TIN on the outboard side of black sidewall tires as mounted on the vehicle. If the TIN is not found on the outboard side, then you will find it on the inboard side of the tire.
258 STARTING AND OPERATING TIRE LOADING AND TIRE PRESSURE Tire and Loading Information Placard Tire Placard Location NOTE: The proper cold tire inflation pressure is listed on either the face of the driver’s door or the driver’s side B-Pillar.
STARTING AND OPERATING 259 Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. You will not exceed the tire’s load carrying capacity if you adhere to the loading conditions, tire size, and cold tire inflation pressures specified on the Tire and Loading Information placard and in the “Vehicle Loading” section of this manual.
260 STARTING AND OPERATING available cargo and luggage load capacity is 650 lbs (295 kg) {(since 5 x 150 = 750, and 1400 – 750 = 650 lbs (295 kg)}. 5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4. 6. If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle.
STARTING AND OPERATING 261 5
262 STARTING AND OPERATING WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. 1. Safety— WARNING! • Improperly inflated tires are dangerous and can cause accidents. • Under-inflation increases tire flexing and can result in tire failure. TIRES — GENERAL INFORMATION • Over-inflation reduces a tire’s ability to cushion shock.
STARTING AND OPERATING 2. Economy— Improper inflation pressures can cause uneven wear patterns to develop across the tire tread. These abnormal wear patterns will reduce tread life resulting in a need for earlier tire replacement. Under-inflation also increases tire rolling resistance and results in higher fuel consumption. 263 maximum loaded vehicle condition. These pressure conditions will be found in the “Supplemental Tire Pressure Information” section of this manual. 3.
264 STARTING AND OPERATING check tire pressure. Do not make a visual judgement when determining proper inflation. Radial tires may look properly inflated even when they are under-inflated. CAUTION! After inspecting or adjusting the tire pressure, always reinstall the valve stem cap (if equipped). This will prevent moisture and dirt from entering the valve stem, which could damage the valve stem. Inflation pressures specified on the placard are always “cold tire inflation pressure.
STARTING AND OPERATING Tire Pressures for High Speed Operation The manufacturer advocates driving at safe speeds within posted speed limits. Where speed limits or conditions are such that the vehicle can be driven at high speeds, maintaining correct tire inflation pressure is very important. Increased tire pressure and reduced vehicle loading may be required for high-speed vehicle operation.
266 STARTING AND OPERATING Compact Spare Tire — If Equipped The compact spare is for temporary emergency use with radial tires. It is engineered to be used on your style vehicle only. Since this tire has limited tread life, the original tire should be repaired (or replaced) and reinstalled at the first opportunity. WARNING! Temporary use spare tires are for emergency use only. With these tires, do not drive more than 50 mph (80 km/h). Temporary use spare tires have limited tread life.
STARTING AND OPERATING 267 original equipped tire on the front or rear axle of your vehicle, but it is not. Installation of this limited-use spare tire affects vehicle handling. Since it is not the same tire, replace (or repair) the original tire and reinstall on the vehicle at the first opportunity. Tire Spinning When stuck in mud, sand, snow, or ice conditions, do not spin your vehicle’s wheels faster than 30 mph (48 km/h) or for longer than 30 seconds continuously without stopping when you are stuck.
268 STARTING AND OPERATING Tread Wear Indicators Tread wear indicators are in the original equipment tires to help you in determining when your tires should be replaced. These indicators are molded into the bottom of the tread grooves. They will appear as bands when the tread depth becomes 1/16 in (2 mm). When the tread is worn to the tread wear indicators, the tire should be replaced. Many states have laws requiring tire replacement at this point.
STARTING AND OPERATING WARNING! Tires and the spare tire should be replaced after six years, regardless of the remaining tread. Failure to follow this warning can result in sudden tire failure. You could lose control and have an accident resulting in serious injury or death. Keep dismounted tires in a cool, dry place with as little exposure to light as possible. Protect tires from contact with oil, grease, and gasoline.
270 STARTING AND OPERATING WARNING! CAUTION! • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change suspension dimensions and performance characteristics, resulting in changes to steering, handling, and braking of your vehicle. This can cause unpredictable handling and stress to steering and suspension components. You could lose control and have an accident resulting in serious injury or death.
STARTING AND OPERATING Improper alignment will not cause vehicle vibration. Vibration may be a result of tire and wheel out-ofbalance. Proper balancing will reduce vibration and avoid tire cupping and spotty wear. TIRE PRESSURE MONITORING SYSTEM (TPMS) — IF EQUIPPED 271 pressure molded into the tire sidewall. Refer to “Tires – General Information” in this section for information on how to properly inflate the vehicle’s tires.
272 STARTING AND OPERATING The system will automatically update and the Tire Pressure Monitoring Telltale Light will turn off once the system receives the updated tire pressures. The vehicle may need to be driven for up to 10 minutes above 15 mph (25 km/h) in order for the TPMS to receive this information. − For example, your vehicle may have a recommended cold (parked for more than three hours) placard pressure of 30 psi (207 kPa).
STARTING AND OPERATING NOTE: • The TPMS is not intended to replace normal tire care and maintenance or to provide warning of a tire failure or condition. 273 • Seasonal temperature changes will affect tire pressure, and the TPMS will monitor the actual tire pressure in the tire. • The TPMS should not be used as a tire pressure gauge while adjusting your tire pressure. Base System — If Equipped This is the TPMS warning indicator located in the instrument cluster.
274 STARTING AND OPERATING The TPMS consists of the following components: • Receiver Module • Four Tire Pressure Monitoring Sensors • Tire Pressure Monitoring Telltale Light The Tire Pressure Monitoring Telltale Light will illuminate in the instrument cluster, and an audible chime will be activated when one or more of the four active road tire pressures are low.
STARTING AND OPERATING NOTE: Your vehicle is equipped with a compact spare wheel and tire assembly. 1. The compact spare tire does not have a tire pressure monitoring sensor. Therefore, the TPMS will not monitor the tire pressure in the compact spare tire. 2.
276 STARTING AND OPERATING NOTE: It is particularly important for you to check the tire pressure in all of your tires regularly and to maintain the proper pressure. The TPMS consists of the following components: pressures are low. The audible chime will sound once every ignition cycle for each condition that it detects. In addition, the EVIC will display a graphic of the pressure value(s) with the low tire(s) flashing.
STARTING AND OPERATING 277 and inflate the low tire(s) that is flashing on the graphic display to the vehicle’s recommended cold placard pressure value. The system will automatically update, the graphic display of the pressure value(s) will stop flashing, and the Tire Pressure Monitoring Light will extinguish once the updated tire pressure(s) have been received. The vehicle may need to be driven for up to 10 minutes above 15 mph (25 km/h) to receive this information.
278 STARTING AND OPERATING will be displayed instead of dashes. A system fault can occur with any of the following scenarios: 1. Jamming due to electronic devices or driving next to facilities emitting the same radio frequencies as the TPM sensors. 2. Installing some form of aftermarket window tinting that affects radio wave signals. 3. Snow or ice around the wheels or wheel housings. 4. Using tire chains on the vehicle. 5. Using wheels/tires not equipped with TPM sensors.
STARTING AND OPERATING 279 limit in any of the four active road tires. The vehicle may need to be driven for up to 10 minutes above 15 mph (25 km/h) in order for the TPMS to receive this information. TIRE CHAINS Due to limited clearance, tire chains are not recommended. General Information This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: CAUTION! Damage to the vehicle may result if tire chains are used.
280 STARTING AND OPERATING Snow tires generally have lower speed ratings than what was originally equipped with your vehicle and should not be operated at sustained speeds over 75 mph (120 km/h). TIRE ROTATION RECOMMENDATIONS Tires on the front and rear axles of vehicles operate at different loads and perform different steering, driving, and braking functions. For these reasons, they wear at unequal rates and tend to develop irregular wear patterns.
STARTING AND OPERATING FUEL REQUIREMENTS GASOLINE ENGINES Your vehicle is designed to meet all emission regulations and provide excellent fuel economy when using high-quality regular unleaded gasoline with an octane rating of 87. The use of premium gasoline is not recommended. The use of premium gasoline will provide no benefit over high-quality regular gasolines and, in some circumstances may result in poorer performance. Light spark knock at low engine speeds is not harmful to your engine.
282 STARTING AND OPERATING Gasoline/Oxygenate Blends Some fuel suppliers blend unleaded gasoline with oxygenates such as 10% ethanol, MTBE, and ETBE. Oxygenates are required in some areas of the country during the winter months to reduce carbon monoxide emissions. Fuels blended with these oxygenates may be used in your vehicle. CAUTION! DO NOT use gasolines containing Methanol or E85 Ethanol.
STARTING AND OPERATING 283 Materials Added To Fuel All gasoline sold in the United States is required to contain effective detergent additives. Use of additional detergents or other additives is not needed under normal conditions and would result in additional cost. Therefore you should not have to add anything to the fuel. • An out-of-tune engine, or certain fuel or ignition malfunctions, can cause the catalytic converter to overheat.
284 STARTING AND OPERATING Carbon Monoxide Warnings WARNING! Carbon monoxide (CO) in exhaust gases is deadly. Follow the precautions below to prevent carbon monoxide poisoning: • Do not inhale exhaust gases. They contain carbon monoxide, a colorless and odorless gas which can kill. Never run the engine in a closed area, such as a garage, and never sit in a parked vehicle with the engine running for an extended period of time.
STARTING AND OPERATING 285 CAUTION! • A poorly fitting gas cap may cause the Malfunction Indicator Light (MIL) to turn on. • To avoid fuel spillage and overfilling, do not “top off” the fuel tank after filling. NOTE: When the fuel nozzle “clicks” or shuts off, the fuel tank is full. Fuel Filler Door WARNING! • Never have any smoking materials lit in or near the vehicle when the gas cap is removed or the tank filled. • Never add fuel when the engine is running. This will cause the MIL to turn on.
286 STARTING AND OPERATING NOTE: Tighten the gas cap about one-quarter turn until you hear one click. This is an indication that cap is properly tightened. If the gas cap is not tightened properly, the MIL will come on. Be sure that the gas cap is tightened every time the vehicle is refueled. WARNING! A fire may result if gasoline is pumped into a portable container that is inside of a vehicle. You could be burned. Always place gas containers on the ground while filling.
STARTING AND OPERATING VEHICLE LOADING Vehicle Loading Capacities Front Seat Occupants . . . . . . . . . . . . . . . . . . . . . . . 2 Rear Seat Occupants . . . . . . . . . . . . . . . . . . . . . . . 3 Luggage . . . . . . . . . . . . . . . . . . . . . . . 175 lbs (80 kg) Vehicle Rated Capacity . . . . . . . . . . . . 925 lbs (420 kg) Gross Vehicle Weight Rating (GVWR) The GVWR is the total allowable weight of your vehicle.
288 STARTING AND OPERATING Gross Trailer Weight (GTW) The Gross Trailer Weight (GTW) is the weight of the trailer plus the weight of all cargo, consumables and equipment (permanent or temporary) loaded in or on the trailer in its ⬙loaded and ready for operation⬙ condition. The recommended way to measure GTW is to put your fully loaded trailer on a vehicle scale. The entire weight of the trailer must be supported by the scale.
STARTING AND OPERATING Frontal Area The Frontal Area is the maximum height and maximum width of the front of a trailer. Trailer Sway Control The Trailer Sway Control is a telescoping link that can be installed between the hitch receiver and the trailer tongue that typically provides adjustable friction associated with the telescoping motion to dampen any unwanted trailer swaying motions while traveling.
290 STARTING AND OPERATING Installing A Trailer Hitch NOTE: If you install a trailer hitch after you purchase the vehicle, you must install a Mopar威 spare tire hold down kit. The kit will allow you to properly secure the spare tire and jack assembly. WARNING! Do not operate the vehicle without a properly secured tire and jack assembly. Any loose items may be thrown forward in a collision or hard stop and strike occupants, causing serious or fatal injury.
STARTING AND OPERATING 291 Trailer Towing Weights (Maximum Trailer Weight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Engine/Transmission Frontal Area 2.0L Auto 22 sq ft (2.04 sq m) 2.4L Auto 22 sq ft (2.04 sq m) 1.8L Manual 22 sq ft (2.04 sq m) 2.4L Auto/Man with 32 sq ft (3.0 sq m) Trailer Tow Prep Package (AHC) Refer to local laws for maximum trailer towing speeds.
292 STARTING AND OPERATING severely from side-to-side which will cause loss of control of vehicle and trailer. Failure to load trailers heavier in front is the cause of many trailer accidents. Never exceed the maximum tongue weight stamped on your bumper or trailer hitch. Consider the following items when computing the weight on the rear axle of the vehicle: • The tongue weight of the trailer. • The weight of any other type of cargo or equipment put in or on your vehicle.
STARTING AND OPERATING Towing Requirements To promote proper break-in of your new vehicle drivetrain components, the following guidelines are recommended: CAUTION! • Avoid towing a trailer for the first 500 mi (805 km) of vehicle operation. Doing so may damage your vehicle. • During the first 500 mi (805 km) of trailer towing, limit your speed to 50 mph (80 km/h). Perform the maintenance listed in Section 8 of this manual. When towing a trailer, never exceed the GAWR or GCWR ratings.
294 STARTING AND OPERATING • Safety chains must always be used between your vehicle and trailer. Always connect the chains to the frame or hook retainers of the vehicle hitch. Cross the chains under the trailer tongue and allow enough slack for turning corners. • Vehicles with trailers should not be parked on a grade. When parking, apply the parking brake on the tow vehicle. Put the tow vehicle automatic transmission in PARK. With a manual transmission, shift the transmission into REVERSE.
STARTING AND OPERATING − Check for signs of tire wear or visible tire damage before towing a trailer. Refer to “Tread Wear Indicators” under “Tires–General Information” in Section 5 under for the proper inspection procedure. − When replacing tires refer to the Tires–General Information section of this manual on Replacement Tires for proper tire replacement procedures. Replacing tires with a higher load carrying capacity will not increase the vehicle’s GVWR and GAWR limits.
296 STARTING AND OPERATING WARNING! Do not connect trailer brakes to your vehicle’s hydraulic brake lines. It can overload your brake system and cause it to fail. You might not have brakes when you need them and could have an accident. Towing any trailer will increase your stopping distance. When towing, you should allow for additional space between your vehicle and the vehicle in front of you. Failure to do so could result in an accident.
STARTING AND OPERATING 297 5 4-Pin Connector 7-Pin Connector
298 STARTING AND OPERATING Towing Tips Before setting out on a trip, practice turning, stopping and backing the trailer in an area away from heavy traffic. If using a manual transmission vehicle for trailer towing, all starts must be in 1st gear to avoid excessive clutch slippage. Towing Tips — Electronic Speed Control (If Equipped) − Don’t use in hilly terrain or with heavy loads.
STARTING AND OPERATING 299 RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.
300 STARTING AND OPERATING CAUTION! • DO NOT FLAT TOW any vehicles equipped with an AUTOMATIC TRANSAXLE. Damage to the drivetrain will result. If these vehicles require towing, make sure all four wheels are off the ground. • Front or rear wheel lifts should not be used. Internal damage to the transmission will occur if a front or rear wheel lift is used when recreational towing.
WHAT TO DO IN EMERGENCIES CONTENTS 䡵 Hazard Warning Flasher . . . . . . . . . . . . . . . . . . 302 ▫ Jacking Instructions . . . . . . . . . . . . . . . . . . . . 306 䡵 If Your Engine Overheats . . . . . . . . . . . . . . . . . 302 䡵 Jump-Starting Procedures Due To A Low Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 310 䡵 Automatic Transaxle Overheating . . . . . . . . . . . 304 䡵 Jacking And Tire Changing . . . . . . . . . . . . . . . . 304 ▫ Jack Location . . . . . . . . . . . .
302 WHAT TO DO IN EMERGENCIES HAZARD WARNING FLASHER If it is necessary to leave the vehicle to go for service, the flasher system will continue to operate with the ignition key removed and the vehicle locked. NOTE: With extended use, the flasher may wear down your battery. Hazard Warning Flasher The flasher switch is located on the instrument panel below the radio. Depress the switch and both cluster indicators and all front and rear directional signals will flash.
WHAT TO DO IN EMERGENCIES the normal range. If the pointer remains on the H (red) mark for more than a minute, turn the engine off immediately and call for service. NOTE: There are steps that you can take to slow down an impending overheat condition. If your air conditioner is on, turn it off. The air conditioning system adds heat to the engine cooling system and turning off the A/C removes this heat.
304 WHAT TO DO IN EMERGENCIES WARNING! A hot engine cooling system is dangerous. You or others could be badly burned by steam or boiling coolant. You may want to call a service center if your vehicle overheats. If you decide to look under the hood yourself, refer to “Maintenance”, Section 7 of this manual. Follow the warnings under the Cooling System Pressure Cap paragraph.
WHAT TO DO IN EMERGENCIES Jack Location The jack and jack-handle are stowed under the load floor in the cargo area. 305 Spare Tire Stowage The compact spare tire is stowed under the rear load floor in the cargo area. Spare Tire Removal Lift up the load floor cover and remove the hold down. Preparations For Jacking Park the vehicle on a firm level surface, avoiding ice or slippery areas, set the parking brake and place the shift lever in PARK (automatic transaxle) or REVERSE (manual transaxle).
306 WHAT TO DO IN EMERGENCIES • Turn on the Hazard Warning Flasher. • Block both the front and rear of the wheel diagonally opposite the jacking position. For example, if changing the right front tire, block the left rear wheel. • Passengers should not remain in the vehicle while the vehicle is being jacked.
WHAT TO DO IN EMERGENCIES 307 1. Remove the scissors jack and lug wrench from the spare wheel as an assembly. Turn the jack screw to the left to loosen the lug wrench and remove the wrench from the jack assembly. 2. Loosen, but do not remove, the wheel nuts by turning them to the left one turn while the wheel is still on the ground. 6 Jacking Locations CAUTION! Do not attempt to raise the vehicle by jacking on locations other than those indicated in Step 3.
308 WHAT TO DO IN EMERGENCIES 3. There are two front jacking locations and two rear jacking locations on each side of the body. The front locations are outlined by two triangular cutouts, the rear ones by two rectangular cutouts. For vehicles equipped with plastic trim, the plastic has been cut away to expose the jacking locations in the body. Do not raise the vehicle until you are sure the jack is securely engaged. 4.
WHAT TO DO IN EMERGENCIES WARNING! To avoid possible personal injury, handle the wheel covers with care to avoid contact with any sharp edges. NOTE: The wheel cover is held on the wheel by the wheel nuts. When reinstalling the original wheel, properly align the wheel cover to the valve stem, place the wheel cover onto the wheel, then install the wheel nuts. 309 9. Remove the wheel blocks and lower the jack until it is free.
310 WHAT TO DO IN EMERGENCIES WARNING! WARNING! A loose tire thrown forward in a collision or hard stop could injure the occupants in the vehicle. Have the deflated (flat) tire repaired or replaced immediately. Do not attempt to push or tow your vehicle to get it started. Vehicles equipped with an automatic transaxle cannot be started this way and may be damaged. Unburned fuel could enter the catalytic converter and once the engine has started, ignite and damage the converter and vehicle.
WHAT TO DO IN EMERGENCIES WARNING! Wear eye protection and remove any metal jewelry such as watch bands or bracelets that might make an inadvertent electrical contact. You could be seriously injured. NOTE: Disconnecting the battery with the ignition in the ON position will cause vehicles with an automatic transaxle (CVT2) to go into “default mode” and turn on the Malfunction Indicator Light (MIL). See your authorized dealer to correct this condition. 311 1.
312 WHAT TO DO IN EMERGENCIES WARNING! Battery fluid is a corrosive acid solution; do not allow battery fluid to contact eyes, skin or clothing. Don’t lean over the battery when attaching the clamps or allow the clamps to touch each other. If acid splashes in your eyes or on your skin, flush the contaminated area immediately with large quantities of water. A battery generates hydrogen gas which is flammable and explosive. Keep flame or spark away from the vent holes.
WHAT TO DO IN EMERGENCIES front wheels. Then shift back and forth between REVERSE and 1st gear. Usually the least accelerator pedal pressure to maintain the rocking motion without spinning the wheels is most effective. WARNING! Fast spinning tires can be dangerous. Forces generated by excessive wheel speeds may cause axle, tire damage or failure. A tire could explode and injure someone.
314 WHAT TO DO IN EMERGENCIES All Transaxles CAUTION! If the vehicle being towed requires steering, the ignition switch must be in the ACC position, not in the LOCK position. Do not attempt to use sling type equipment when towing. When securing the vehicle to a flat bed truck, do not attach to front or rear suspension components. Damage to your vehicle may result from improper towing. If it is necessary to use the accessories while being towed (wipers, defrosters, etc.
MAINTAINING YOUR VEHICLE CONTENTS 䡵 Engine Compartment — Gasoline Engines . . . . . 318 ▫ Drive Belt — Check Condition . . . . . . . . . . . . 326 䡵 Onboard Diagnostic System — OBD II . . . . . . . . 319 ▫ Spark Plugs . . . . . . . . . . . . . . . . . . . . . . . . . 326 ▫ Loose Fuel Filler Cap Message . . . . . . . . . . . . 319 ▫ Catalytic Converter . . . . . . . . . . . . . . . . . . . . 326 䡵 Emissions Inspection And Maintenance Programs . . . . . . . . . . . . . . . . . . . . . . . . . . . .
316 MAINTAINING YOUR VEHICLE ▫ Front Suspension Ball Joints . . . . . . . . . . . . . . 332 ▫ Body Lubrication . . . . . . . . . . . . . . . . . . . . . 333 ▫ Windshield Wiper Blades . . . . . . . . . . . . . . . . 333 ▫ Windshield Washer Fluid Reservoir . . . . . . . . 334 ▫ Exhaust System . . . . . . . . . . . . . . . . . . . . . . 334 ▫ Cooling System . . . . . . . . . . . . . . . . . . . . . . . 335 ▫ Hoses And Vacuum/Vapor Harnesses . . . . . . . 340 ▫ Fuel System Connections . . . . . . . . . . . .
MAINTAINING YOUR VEHICLE 317 䡵 Fluids And Capacities . . . . . . . . . . . . . . . . . . . 360 ▫ Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 361 䡵 Fluids, Lubricants, And Genuine Parts . . . . . . . . 361 ▫ Chassis . . . . . . . . . . . . . . . . . . . . . . . . . . . .
318 MAINTAINING YOUR VEHICLE ENGINE COMPARTMENT — GASOLINE ENGINES
MAINTAINING YOUR VEHICLE ONBOARD DIAGNOSTIC SYSTEM — OBD II Your vehicle is equipped with a sophisticated Onboard Diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transaxle control systems. When these systems are operating properly, your vehicle will provide excellent performance and fuel economy, as well as engine emissions well within current government regulations.
320 MAINTAINING YOUR VEHICLE RESET button to turn off the message. If the problem persists, the message will appear the next time the vehicle is started. This might indicate a damaged cap. If the problem is detected twice in a row, the system will turn on the MIL. Resolving the problem will turn the MIL light off. EMISSIONS INSPECTION AND MAINTENANCE PROGRAMS In some localities, it may be a legal requirement to pass an inspection of your vehicle’s emissions control system.
MAINTAINING YOUR VEHICLE 321 5. Approximately 15 seconds later, one of two things will happen: system to update. A recheck with the above test routine may then indicate that the system is now ready. a. The MIL will flash for about 10 seconds and then return to being fully illuminated until you turn OFF the ignition key or start the engine. This means that your vehicle’s OBD II system is not ready and you should not proceed to the I/M station.
322 MAINTAINING YOUR VEHICLE AUTHORIZED DEALER SERVICE Your authorized dealer has the qualified service personnel, special tools, and equipment to perform all service operations in an expert manner. Service manuals are available which include detailed service information for your vehicle. Refer to these Service manuals before attempting any procedure yourself. NOTE: Intentional tampering with emissions control systems can result in civil penalties being assessed against you.
MAINTAINING YOUR VEHICLE The best time to check the engine oil level is about five minutes after a fully warmed engine is shut off. Do not check oil level before starting the engine after it has sat overnight. Checking engine oil level when the engine is cold will give you an incorrect reading. 323 Checking the oil while the vehicle is on level ground and only when the engine is hot, will improve the accuracy of the oil level readings. Maintain the oil level between the range markings on the dipstick.
324 MAINTAINING YOUR VEHICLE Change Engine Oil Refer to the “Maintenance Schedule” in Section 8 for recommended engine oil change intervals. Engine Oil Selection (Gasoline Engines) For best performance and maximum protection for all engines under all types of operating conditions, the manufacturer recommends engine oils that are API Certified and meet the requirements of DaimlerChrysler Material Standard MS-6395.
MAINTAINING YOUR VEHICLE Lubricants which do not have both the engine oil certification mark and the correct SAE viscosity grade number should not be used. Synthetic Engine Oils You may use synthetic engine oils provided the recommended oil quality requirements are met, and the recommended maintenance intervals for oil and filter changes are followed. Materials Added To Engine Oils The manufacturer strongly recommends against the addition of any additives (other than leak detection dyes) to the engine oil.
326 MAINTAINING YOUR VEHICLE Drive Belt — Check Condition Check the drive belt condition. Refer to the “Maintenance Schedule” in Section 8 of this manual. Inspect the drive belt for evidence of cuts, cracks, or glazing and replace the belt for any sign of damage which could result in belt failure. The belt is self-tensioning and will not need adjustment. Spark Plugs Spark plugs must fire properly to assure engine performance and emission control.
MAINTAINING YOUR VEHICLE 327 CAUTION! WARNING! Damage to the catalytic converter can result if your vehicle is not kept in proper operating condition. In the event of engine malfunction, particularly involving engine misfire or other apparent loss of performance, have your vehicle serviced promptly. Continued operation of your vehicle with a severe malfunction could cause the converter to overheat, resulting in possible damage to the converter and the vehicle.
328 MAINTAINING YOUR VEHICLE To minimize the possibility of catalyst damage: • Do not shut off the engine or interrupt the ignition when the transaxle is in gear and the vehicle is in motion. • Do not try to start the engine by pushing or towing the vehicle. • Do not idle the engine with any spark plug wires disconnected for a prolonged period. Crankcase Emission Control System Proper operation of this system depends on freedom from sticking or plugging due to deposits.
MAINTAINING YOUR VEHICLE 329 WARNING! CAUTION! The air cleaner can provide a measure of protection in the case of engine backfire. Do not remove the air cleaner unless such removal is necessary for repair or maintenance. Make sure that no one is near the engine compartment before starting the vehicle with the air cleaner removed. Failure to do so can result in serious personal injury. When servicing the battery, always reinstall the battery thermowrap.
330 MAINTAINING YOUR VEHICLE WARNING! CAUTION! Battery fluid is a corrosive acid solution and can burn or even blind you. Don’t allow battery fluid to contact your eyes, skin or clothing. Don’t lean over a battery when attaching clamps. If acid splashes in eyes or on skin, flush the area immediately with large amounts of water. It is essential when replacing the cables on the battery that the positive cable is attached to the positive post and the negative cable is attached to the negative post.
MAINTAINING YOUR VEHICLE Air Conditioner Maintenance For best possible performance, your air conditioner should be checked and serviced by an authorized dealer at the start of each warm season. This service should include cleaning of the condenser fins and a performance test. Drive belt tension should also be checked at this time. 331 WARNING! • Use only refrigerants and compressor lubricants approved by the manufacturer for your air conditioning system.
332 MAINTAINING YOUR VEHICLE Refrigerant Recovery And Recycling R-134a Air Conditioning Refrigerant is a hydrofluorocarbon (HFC) that is endorsed by the Environmental Protection Agency and is an ozone-saving product. However, the manufacturer recommends that air conditioning service be performed by authorized dealers or other service facilities using recovery and recycling equipment.
MAINTAINING YOUR VEHICLE Body Lubrication Locks and all body pivot points, including such items as seat tracks, doors, liftgate and hood hinges, should be lubricated periodically to assure quiet, easy operation and to protect against rust and wear. Prior to the application of any lubricant, the parts concerned should be wiped clean to remove dust and grit. After lubricating, excess oil and grease should be removed.
334 MAINTAINING YOUR VEHICLE 2. Push the release tab and slide the wiper blade assembly down along the arm. Gently place the wiper arm on the windshield. 3. Install the new blade assembly onto the wiper arm tip until it locks in place. Windshield Washer Fluid Reservoir The windshield washer fluid reservoir is located in the rear of the engine compartment on the right side and should be checked for fluid level at regular intervals.
MAINTAINING YOUR VEHICLE Cooling System WARNING! • When working near the radiator cooling fan, disconnect the fan motor lead or turn the ignition switch to the OFF position. The fan is temperature controlled and can start at any time the ignition switch is in the ON position. • You or others can be badly burned by hot coolant or steam from your radiator. If you see or hear steam coming from under the hood, don’t open the hood until the radiator has had time to cool.
336 MAINTAINING YOUR VEHICLE Cooling System — Drain, Flush And Refill Refer to “Maintenance Schedule” under Section 8. If the solution is dirty or contains a considerable amount of sediment, clean and flush with a reliable cooling system cleaner. Follow with a thorough rinsing to remove all deposits and chemicals. Properly dispose of old antifreeze solution. Selection Of Coolant Refer to “Fluids, Lubricants and Genuine Parts” in Section 8.
MAINTAINING YOUR VEHICLE Adding Coolant Your vehicle has been built with an improved engine coolant that allows extended maintenance intervals. This coolant can be used up to five years or 100,000 miles before replacement. To prevent reducing this extended maintenance period, it is important that you use the same coolant throughout the life of your vehicle. Please review these recommendations for using Hybrid Organic Additive Technology (HOAT) coolant.
338 MAINTAINING YOUR VEHICLE WARNING! • The warning words “DO NOT OPEN HOT” on the cooling system pressure cap are a safety precaution. Never add coolant when the engine is overheated. Do not loosen or remove the cap to cool an overheated engine. Heat causes pressure to build up in the cooling system. To prevent scalding or injury, do not remove the pressure cap while the system is hot or under pressure. • Do not use a pressure cap other than the one specified for your vehicle.
MAINTAINING YOUR VEHICLE When additional coolant is needed to maintain the proper level, it should be added to the coolant bottle. Do not overfill. Points To Remember NOTE: When the vehicle is stopped after a few miles/ kilometers of operation, you may observe vapor coming from the front of the engine compartment. This is normally a result of moisture from rain, snow, or high humidity accumulating on the radiator and being vaporized when the thermostat opens, allowing hot coolant to enter the radiator.
340 MAINTAINING YOUR VEHICLE • Do not change the thermostat for summer or winter operation. If replacement is ever necessary, install ONLY the correct type thermostat. Other designs may result in unsatisfactory coolant performance, poor gas mileage, and increased emissions. Hoses And Vacuum/Vapor Harnesses Inspect surfaces of hoses and nylon tubing for evidence of heat and mechanical damage.
MAINTAINING YOUR VEHICLE Brake System In order to assure brake system performance, all brake system components should be inspected periodically. Refer to “Maintenance Schedule” under Section 8. WARNING! Riding the brakes can lead to brake failure and possibly an accident. Driving with your foot resting or riding on the brake pedal can result in abnormally high brake temperatures, excessive lining wear, and possible brake damage. You would not have your full braking capacity in an emergency.
342 MAINTAINING YOUR VEHICLE NOTE: Inspection of brake hoses should be done whenever the brake system is serviced and at every engine oil change. WARNING! fluid reservoir. Fluid level can be expected to fall as the brake pads wear. The brake fluid level should be checked when the pads are replaced. However, low fluid level may be caused by a leak and a checkup may be needed.
MAINTAINING YOUR VEHICLE 343 WARNING! WARNING! Use of a brake fluid that may have a lower initial boiling point or is unidentified as to specification, may result in sudden brake failure during hard prolonged braking. You could have an accident. Overfilling the brake fluid reservoir can result in spilling brake fluid on hot engine parts and the brake fluid catching fire. CAUTION! Use of improper brake fluids will affect overall clutch system performance.
344 MAINTAINING YOUR VEHICLE steel belt traction on the drive and driven pulleys. Refer to “Fluids, Lubricants and Genuine Parts” for correct fluid type. CAUTION! Using a transmission fluid other than the manufacturer’s recommended fluid will cause belt slip and result in a complete transmission failure! Refer to “Fluids, Lubricants, and Genuine Parts” for correct fluid type. Fluid Level Check The fluid level in the automatic transaxle should be checked only by a trained technician.
MAINTAINING YOUR VEHICLE Frequency Of Fluid Change Under normal operating conditions, the fluid installed at the factory will give satisfactory lubrication for the life of the vehicle. Fluid changes are not necessary lubricant has become contaminated with water. NOTE: If contaminated with water, the fluid should be changed immediately. Rear Drive Assembly (RDA) – AWD/4WD Models Only Lubricant Selection Use only the manufacturer’s recommended fluid.
346 MAINTAINING YOUR VEHICLE Add fluid, if necessary, to maintain the proper level. Frequency Of Fluid Change Refer to the “Maintenance Schedule” under Section 8. Appearance Care And Protection From Corrosion Protection Of Body And Paint From Corrosion Vehicle body care requirements vary according to geographic locations and usage.
MAINTAINING YOUR VEHICLE Washing • Wash your vehicle regularly. Always wash your vehicle in the shade using Mopar威 Car Wash or a mild car wash soap, and rinse the panels completely with clear water. • If insects, tar or other similar deposits have accumulated on your vehicle, use Mopar威 Super Kleen Bug and Tar Remover to remove. • Use Mopar威 Cleaner Wax to remove road film, stains and to protect your paint finish. Take care never to scratch the paint.
348 MAINTAINING YOUR VEHICLE • If your vehicle is damaged due to an accident or similar cause which destroys the paint and protective coating, have your vehicle repaired as soon as possible. The cost of such repairs is considered the responsibility of the owner. • If you carry special cargo such as chemicals, fertilizers, de-icer salt, etc., be sure that such materials are well packaged and sealed. • If a lot of driving is done on gravel roads, consider mud or stone shields behind each wheel.
MAINTAINING YOUR VEHICLE • For grease stains, apply Mopar威 Multi-purpose Cleaner to a clean, damp cloth and remove the stain. Use a fresh, damp towel to remove soap residue. • Do not use any solvents or protectants on Yes Essentials威 products. Interior Care Use Mopar威 Total Clean to clean fabric upholstery and carpeting. Use Mopar威 Total Clean to clean vinyl upholstery. Mopar威 Total Clean is specifically recommended for leather upholstery.
350 MAINTAINING YOUR VEHICLE To minimize the possibility of scratching the lenses and reducing light output, avoid wiping with a dry cloth. To remove road dirt, wash with a mild soap solution followed by rinsing. Do not use abrasive cleaning components, solvents, steel wool or other aggressive material to clean the lenses. Glass Surfaces All glass surfaces should be cleaned on a regular basis with Mopar威 Glass Cleaner or any commercial household-type glass cleaner. Never use an abrasive type cleaner.
MAINTAINING YOUR VEHICLE 351 Cleaning Plastic Instrument Cluster Lenses The lenses in front of the instruments in this vehicle are molded in clear plastic. When cleaning the lenses, care must be taken to avoid scratching the plastic. Replace the seat belts if they appear frayed or worn or if the buckles do not work properly. 1. Clean with a wet, soft rag. A mild soap solution may be used, but do not use high alcohol content or abrasive cleaners. If soap is used, wipe clean with a clean, damp rag.
352 MAINTAINING YOUR VEHICLE Cavity Cartridge MiniFuse Fuse 3 10 Amp Red 4 10 Amp Red 5 20 Amp Yellow 6 10 Amp Red 7 30 Amp Green 30 Amp Green 8 9 40 Amp Green Description CHMSL Brake Switch Feed Ignition Switch Feed Trailer Tow IOD Sw/Pwr Mir/ Ocm Steering Cntrl Sdar/Hands-Free Phone IOD Sense1 IOD Sense2 Power Seats Cavity Cartridge MiniFuse Fuse 10 20 Amp Yellow 11 15 Amp Lt Blue 12 20 Amp Yellow 13 20 Amp Yellow 14 10 Amp Red 15 40 Amp Green 16 15 Amp Lt Blue 17 10 Amp Red Description CCN Power
MAINTAINING YOUR VEHICLE Cavity Cartridge MiniFuse Fuse 18 40 Amp Green 19 20 Amp Yellow 20 15 Amp Lt Blue 21 10 Amp Red 22 10 Amp Red 23 15 Amp Lt Blue 24 15 Amp Lt Blue 25 10 Amp Red Description ASD Relay Contact PWR Feed PWR Amp 1 & Amp 2 Feed IOD Feed Radio Cavity Cartridge MiniFuse Fuse 26 15 Amp Lt Blue 27 10 Amp Red 28 10 Amp Red 29 IOD Feed Intrus Mod/Siren IGN RUN Heat/AC/ Compass Sensor ENG ASD Relay Feed 3 Power Sunroof Feed 32 Heated Mirror 33 30 20 Amp Yellow 10 Amp Red 31 30 Amp Pink
354 MAINTAINING YOUR VEHICLE Cavity Cartridge MiniFuse Fuse 34 30 Amp Pink 35 40 Amp Green 36 30 Amp Pink 37 25 Amp Natural Description ABS Valve Feed ABS Pump Feed Headlamp/Washer Control/Smart Glass 110 Inverter CAUTION! • When installing the IPM cover, it is important to ensure the cover is properly positioned and fully latched. Failure to do so may allow water to get into the IPM, and possibly result in an electrical system failure.
MAINTAINING YOUR VEHICLE VEHICLE STORAGE If you will not be using your vehicle for more than 21 days, you may want to take steps to preserve your battery. You may: • Disengage the mini-fuse in the Power Distribution Center labeled IOD (Ignition Off-Draw). • Or, disconnect the negative cable from the battery. REPLACEMENT BULBS All the inside bulbs are brass or glass wedge base. Aluminum base bulbs are not approved and should not be used for replacement.
356 MAINTAINING YOUR VEHICLE Fog Lights 1. Access light through the lower fascia cutout. 2. Rotate bulb and connector 1/4 turn counterclockwise. Tail Lights, Rear Turn Signals And Backup Lights — Replacement 1. Remove the two push-pins from the tail light housing. 3. Pull bulb off connector. Removing Push-Pins Fog Light and Connector 2. Grasp the tail light and pull firmly to disengage the light from the aperture panel.
MAINTAINING YOUR VEHICLE 357 3. Twist and remove socket from light.
358 MAINTAINING YOUR VEHICLE 4. Remove the bulb from the socket and replace. License Lights 1. Use a screw driver to gently pry against the side of the snap tab to remove the light from the liftgate.
MAINTAINING YOUR VEHICLE 359 2. Rotate the socket 1/4 turn counterclockwise. Removing Bulb From Socket Removing Socket From Lamp 3. Pull The Bulb From The Socket. Center High-Mounted Stoplight This light is an LED assembly. See your authorized dealer for replacement.
360 MAINTAINING YOUR VEHICLE FLUIDS AND CAPACITIES Fuel (Approximate) Engine Oil-With Filter All Gasoline Engines (use API Certified SAE 5W-20 Engine Oil) Cooling System * Mopar威 Antifreeze/Coolant 5 Year/100,000 Miles Formula), or equivalent. * Includes heater and coolant recovery bottle filled to MAX level. U.S. 13.5 Gal Metric 51.0 L 4.5 qts 4.26 L 7.2 qts 6.
MAINTAINING YOUR VEHICLE 361 FLUIDS, LUBRICANTS, AND GENUINE PARTS Engine Component Engine Coolant Engine Oil Engine Oil Filter Spark Plugs Fuel Selection Fluids, Lubricants And Genuine Parts Mopar威 Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) or equivalent. Use API Certified SAE 5W-20 Engine Oil. Refer to your engine oil filler cap for correct SAE grade meeting DaimlerChrysler Material Standard MS-6395. Mopar威 04884900AB or equivalent. ZFR5F-11 (Gap 0.
362 MAINTAINING YOUR VEHICLE Chassis Component Automatic Transaxle (CVT) Fluid Manual Transaxle Fluid Rear Drive Assembly (RDA) Power Transfer Unit (PTU) Brake Master Cylinder Power Steering Reservoir Fluids, Lubricants And Genuine Parts Mopar威 CVTF + 4 Mopar威 ATF+4 MS9602 Mopar威 Gear & Axle Lubricant SAE 80W-90 API GL 5 or equivalent nonsynthetic product. Mopar威 Gear & Axle Lubricant SAE 80W-90 API GL 5 or equivalent nonsynthetic product. Mopar威 DOT 3, SAE J1703 should be used.
MAINTENANCE SCHEDULES CONTENTS 䡵 Emissions Control System Maintenance . . . . . . . 364 䡵 Maintenance Schedule . . . . . . . . . . . . . . . . . . . 364 ▫ Required Maintenance Intervals . . . . . . . . . . .
M A I N T E N A N C E 364 MAINTENANCE SCHEDULES EMISSIONS CONTROL SYSTEM MAINTENANCE The Scheduled Maintenance services listed in bold type must be done at the times or mileages specified to ensure the continued proper functioning of the emission control system. These, and all other maintenance services included in this manual, should be done to provide best vehicle performance and reliability.
MAINTENANCE SCHEDULES if it has been six months since your last oil change and even if the oil change indicator message is NOT illuminated. • Change your engine oil more often if you drive your vehicle off-road for an extended period of time. • Under no circumstances should oil change intervals exceed 6,000 mi (10 000 km) or six months, whichever comes first. Your authorized dealer will reset the oil change indicator message after completing the scheduled oil change.
M A I N T E N A N C E S C H E D U L E S 8 366 MAINTENANCE SCHEDULES • Check all lights and other electrical items for correct operation. At Each Oil Change • Change the engine oil filter. • Inspect the brake hoses and lines. • Check the manual transmission fluid level. CAUTION! Failure to perform the required maintenance items may result in damage to the vehicle.
MAINTENANCE SCHEDULES 367 M Required Maintenance Intervals Perform Maintenance Every (Where time and mileage are listed, follow the interval that occurs first.) Maintenance Items Change the engine oil and engine oil filter. Rotate tires. If using your vehicle for dusty or off-road conditions, inspect the engine air cleaner filter; replace if necessary. Inspect the brake linings; replace if necessary. Replace the air conditioning filter. Inspect the CV Joints.
M 368 MAINTENANCE SCHEDULES A I N T E N Maintenance Items A N Replace the engine air cleaner filter. C Replace the spark plugs. E S C H E D U L E S 8 Change the manual transmission fluid if using your vehicle for any of the following: trailer towing, snow plowing, heavy loading, taxi, police, delivery service (commercial service), off-road, desert operation or more then 50% of your driving is at sustained high speeds during hot weather, above 90°F (32°C). Change Rear Drive Assembly (RDA) fluid.
MAINTENANCE SCHEDULES 369 M Perform Maintenance Every (Where time and mileage are listed, follow the interval that occurs first.) Maintenance Items Change the automatic transmission fluid and filter. Replace Accessory Drive Belt(s). WARNING! You can be badly injured working on or around a motor vehicle. Do only that service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent mechanic.
IF YOU NEED CONSUMER ASSISTANCE CONTENTS 䡵 Suggestions For Obtaining Service For Your Vehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 373 ▫ In Mexico Contact . . . . . . . . . . . . . . . . . . . . . 374 ▫ Prepare For The Appointment . . . . . . . . . . . . 373 ▫ Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) . . . . . . . . . . . . . 375 ▫ Prepare A List . . . . . . . . . . . . . . . . . . . . . . . . 373 ▫ Service Contract . . . . . . . . . . . . . . . . . . . .
372 IF YOU NEED CONSUMER ASSISTANCE 䡵 Publication Order Forms . . . . . . . . . . . . . . . . . . 377 ▫ Traction Grades . . . . . . . . . . . . . . . . . . . . . . 379 䡵 Department Of Transportation Uniform Tire Quality Grades . . . . . . . . . . . . . . . . . . . . . . . . 379 ▫ Temperature Grades . . . . . . . . . . . . . . . . . . . 380 ▫ Treadwear . . . . . . . . . . . . . . . . . . . . . . . . . .
IF YOU NEED CONSUMER ASSISTANCE SUGGESTIONS FOR OBTAINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you’re having warranty work done, be sure to have the right papers with you. Take your warranty folder. All work to be performed may not be covered by the warranty. Discuss additional charges with the service manager. Keep a maintenance log of your vehicle’s service history. This can often provide a clue to the current problem.
374 IF YOU NEED CONSUMER ASSISTANCE special tools, and the latest information to ensure your vehicle is fixed correctly and in a timely manner. This is why you should always talk to your authorized dealer’s service manager first. Most matters can be resolved with this process. • If for some reason you are still not satisfied, talk to the general manager or owner of the authorized dealership. They want to know if you need assistance.
IF YOU NEED CONSUMER ASSISTANCE Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) To assist customers who have hearing difficulties, the manufacturer has installed special TDD (Telecommunication Devices for the Deaf) equipment at its Customer Center. Any hearing or speech impaired customer, who has access to a TDD or a conventional teletypewriter (TTY) in the United States, can communicate with the manufacturer by dialing 1–800–380–CHRY.
376 IF YOU NEED CONSUMER ASSISTANCE WARNING! Engine exhaust, some of its constituents, and certain vehicle components contain, or emit, chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. In addition, certain fluids contained in vehicles and certain products of component wear contain, or emit, chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. WARRANTY INFORMATION (U.S.
IF YOU NEED CONSUMER ASSISTANCE 377 To contact NHTSA, you may either call the Auto Safety Hotline toll free at 1–888–327–4236 (TTY: 1–800–424– 9153), or go to http://www.safercar.gov; or write to: Administrator, NHTSA, 400 Seventh Street, SW., Washington, D.C. 20590. You can also obtain other information about motor vehicle safety from http://www.safercar.gov. PUBLICATION ORDER FORMS To order the following manuals, you may use either the website or the phone numbers listed below.
378 IF YOU NEED CONSUMER ASSISTANCE • Diagnostic Procedure Manuals Diagnostic Procedure Manuals are filled with diagrams, charts and detailed illustrations. These practical manuals make it easy for students and technicians to find and fix problems on computer-controlled vehicle systems and features. They show exactly how to find and correct problems the first time, using step-bystep troubleshooting and drivability procedures, proven diagnostic tests and a complete list of all tools and equipment.
IF YOU NEED CONSUMER ASSISTANCE DEPARTMENT OF TRANSPORTATION UNIFORM TIRE QUALITY GRADES The following tire grading categories were established by the National Highway Traffic Safety Administration. The specific grade rating assigned by the tire’s manufacturer in each category is shown on the sidewall of the tires on your vehicle. All passenger car tires must conform to Federal safety requirements in addition to these grades.
380 IF YOU NEED CONSUMER ASSISTANCE Temperature Grades The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat and its ability to dissipate heat, when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive temperature can lead to sudden tire failure.
INDEX 10
382 INDEX ABS (Anti-Lock Brake System) . . . . . . . . . . . . . . 247 Adding Engine Coolant (Antifreeze) . . . . . . . . . . 337 Adding Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . 284 Adding Washer Fluid . . . . . . . . . . . . . . . . . . 124,153 Additives, Fuel . . . . . . . . . . . . . . . . . . . . . . . . . 283 Air Cleaner, Engine (Engine Air Cleaner Filter) . . . 328 Air Conditioner Maintenance . . . . . . . . . . . . . . . 331 Air Conditioning Controls . . . . . . . . . . . . . . .
INDEX Autostick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 239 Ball Joints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 332 Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 329 Keyless Transmitter Replacement (RKE) . . . . . . . 25 Belts, Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . 326 Beverage Cooler . . . . . . . . . . . . . . . . . . . . . . . . 154 Body Mechanism Lubrication . . . . . . . . . . . . . . . 333 B-Pillar Location . . . . .
384 INDEX Cargo Load Floor . . . . . . . . . . . . . . . . . . . . . . . . 150 Cargo Tie-Downs . . . . . . . . . . . . . . . . . . . . . . . . 150 Carrier, Luggage . . . . . . . . . . . . . . . . . . . . . . . . 153 Catalytic Converter . . . . . . . . . . . . . . . . . . . . . . 326 Caution, Exhaust Gas . . . . . . . . . . . . . . . . . . . . . . 69 CD (Compact Disc) Player . . . . . . . . . . . . . . . 187,195 CD (Compact Disc) Player Maintenance . . . . . . . . 218 Cellular Phone . . . . . . . . . . . .
INDEX Coolant Level . . . . . . . . . . . . . . . . . . . . . . 335,338 Disposal of Used Coolant . . . . . . . . . . . . . . . . 338 Drain, Flush, and Refill . . . . . . . . . . . . . . . . . . 336 Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . 338 Points to Remember . . . . . . . . . . . . . . . . . 337,339 Pressure Cap . . . . . . . . . . . . . . . . . . . . . . . . . 337 Selection of Coolant (Antifreeze) . . . . . . . . . . . 336 Corrosion Protection . . . . . . . . . . . . . . . . . .
386 INDEX Brake Assist System . . . . . . . . . . . . . . . . . . . . 130 Electronic Stability Program . . . . . . . . . . . . . . . 131 Traction Control System . . . . . . . . . . . . . . . . . 131 Electronic Speed Control (Cruise Control) . . . . . . 126 Electronic Stability Program (ESP) . . . . . . . . . . . . 131 Electronic Vehicle Information Center (EVIC) . . . . 175 Emergency, In Case of Jacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 304 Jump Starting . . . . . . . . . . . . . .
INDEX Flashers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 302 Hazard Warning . . . . . . . . . . . . . . . . . . . . . . . 302 Turn Signal . . . . . . . . . . . . . . . . . . . . . . . . . . 356 Flat Tire Stowage . . . . . . . . . . . . . . . . . . . . . . . . 309 Flooded Engine Starting . . . . . . . . . . . . . . . . . . . 234 Fluid, Brake . . . . . . . . . . . . . . . . . . . . . . . . . . . 362 Fluid Capacities . . . . . . . . . . . . . . . . . . . . . . . . . 360 Fluid Leaks . . . . .
388 INDEX Gasoline, Clean Air . . . . . . . . . . . . . . . . . . . . . . 281 Gasoline (Fuel) . . . . . . . . . . . . . . . . . . . . . . . 281,360 Gasoline, Reformulated . . . . . . . . . . . . . . . . . . . 282 Gauges Coolant Temperature . . . . . . . . . . . . . . . . . . . . 164 Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164 Odometer . . . . . . . . . . . . . . . . . . . . . . . . . . . 168 Tachometer . . . . . . . . . . . . . . . . . . . . . . . . . . 165 Gearshift . . . . .
INDEX Ignition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Ignition Key Removal . . . . . . . . . . . . . . . . . . . . . 12 Immobilizer (Sentry Key) . . . . . . . . . . . . . . . . . 15,20 Infant Restraint . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Information Center, Vehicle . . . . . . . . . . . . . . . . . 175 Inside Rearview Mirror . . . . . . . . . . . . . . . . . . . . 77 Instrument Cluster . .
390 INDEX Airbag . . . . . . . . . . . . . . . . . . . . . . . . . . 57,70,165 Back-Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 356 Brake Warning . . . . . . . . . . . . . . . . . . . . . . . . 172 Bulb Replacement . . . . . . . . . . . . . . . . . . . . . . 355 Cargo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147 Center Mounted Stop . . . . . . . . . . . . . . . . . . . 359 Daytime Running . . . . . . . . . . . . . . . . . . . . . . 121 Dimmer Switch, Headlight . . . . .
INDEX Lumbar Support . . . . . . . . . . . . . . . . . . . . . . . . 109 Maintenance Free Battery . . . . . . . . . . . . . . . . . . 329 Maintenance, General . . . . . . . . . . . . . . . . . . . . . 322 Maintenance Procedures . . . . . . . . . . . . . . . . . . . 322 Maintenance Schedule . . . . . . . . . . . . . . . . . . . . 364 Malfunction Indicator Light (Check Engine) . . 169,320 Manual, Service . . . . . . . . . . . . . . . . . . . . . . . . . 377 Manual Transaxle . . . . . . . . . . . . . . . . .
392 INDEX Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . 325 Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 325 Identification Logo . . . . . . . . . . . . . . . . . . . . . 324 Materials Added to . . . . . . . . . . . . . . . . . . . . . 325 Recommendation . . . . . . . . . . . . . . . . . . . 324,360 Synthetic . . . . . . . . . . . . . . . . . . . . . . . . . . . . 325 Viscosity . . . . . . . . . . . . . . . . . . . . . . . . . . . . 324 Oil Pressure Light . . . .
INDEX Preparation for Jacking . . . . . . . . . . . . . . . . . . . . 305 Pretensioners Seat Belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Programmable Electronic Features . . . . . . . . . . . . 179 Programming Transmitters (Remote Keyless Entry) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Radial Ply Tires . . . . . . . . . . . . . . . . . . . . . . . . . 265 Radio Broadcast Signals . . . . . . . . . . . . . . . . . . . 185 Radio, Navigation . . . . . . . . .
394 INDEX Roof Rack (Luggage Rack) . . . . . . . . . . . . . . . . . 153 Rotation, Tires . . . . . . . . . . . . . . . . . . . . . . . . . . 280 Safety Checks Inside Vehicle . . . . . . . . . . . . . . . . . 70 Safety Checks Outside Vehicle . . . . . . . . . . . . . . . 71 Safety Defects, Reporting . . . . . . . . . . . . . . . . . . 376 Safety Information, Tire . . . . . . . . . . . . . . . . . . . 254 Safety Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 Satellite Radio . . . . . . .
INDEX Service Assistance . . . . . . . . . . . . . . . . . . . . . . . 373 Service Contract . . . . . . . . . . . . . . . . . . . . . . . . . 375 Service Manuals . . . . . . . . . . . . . . . . . . . . . . . . 377 Setting the Clock . . . . . . . . . . . . . . . . 187,189,197,210 Settings, Personal . . . . . . . . . . . . . . . . . . . . . . . . 179 Shift Speeds, Manual Transaxle . . . . . . . . . . . . . . 243 Shoulder Belts . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Side Airbag . . . . . . .
396 INDEX Tachometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165 Taillights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 356 Temperature Gauge, Engine Coolant . . . . . . . 164,303 Tether Anchor, Child Restraint . . . . . . . . . . . . . . . 64 Theft Alarm (Security Alarm) . . . . . . . . . . . . . . . . 19 Theft System (Security Alarm) . . . . . . . . . . . . . . . 19 Tie Down Hooks, Cargo . . . . . . . . . . . . . . . . . . . 150 Tilt Steering Column . . . . . . . . . . .
INDEX Towing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 287 24-Hour Towing Assistance . . . . . . . . . . . . . . . . 93 Disabled Vehicle . . . . . . . . . . . . . . . . . . . . . . . 313 Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 291 Recreational . . . . . . . . . . . . . . . . . . . . . . . . . . 299 Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 291 Towing Assistance . . . . . . . . . . . . . . . . . . . . . . . . 93 Traction . . . . . . . .
398 INDEX Uniform Tire Quality Grades . . . . . . . . . . . . . . . . 379 Universal Transmitter . . . . . . . . . . . . . . . . . . . . . 134 Unleaded Gasoline . . . . . . . . . . . . . . . . . . . . . . . 281 Vacuum/Vapor Harnesses . . . . . . . . . . . . . . . . . 340 Vanity Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 Variance, Compass . . . . . . . . . . . . . . . . . . . . . . . 183 Vehicle Identification Number (VIN) . . . . . . . . . . . . 6 Vehicle Loading . . . . . . . . . . .
INSTALLATION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this vehicle’s electronic system to provide immunity to radio frequency signals. Mobile two-way radios and telephone equipment must be installed properly by trained personnel. The following must be observed during installation. The positive power connection should be made directly to the battery and fused as close to the battery as possible.
2008 Caliber 2008 OWNER’ S MANUAL 81-226-0839 Second Edition Printed in U.S.A.
