Specifications

532
Practical hints
Changing bulbs
5
2 Retaining lugs
3 Brake lamp
4 Side marker, Standing lamp (Canada
only), tail lamp
5 Reverse lamp
6 Turn signal lamp
7 Rear foglamp (driver’s side)
 Release retaining lugs 2 and re-
move the bulb holder from the rear
lamp unit.
 Press down on the bulb, turn it coun-
terclockwise and remove it from the
holder.
 Press the new bulb into the bulb
holder and screw it in clockwise.
 Plug the connectors into the bulb
holder.
 Fit the rear lamp unit.
To do this, clip the bulb holder into
the three holes provided on the side
and tighten screws
1.
nf_BA.book Page 532 Friday, January 25, 2008 3:53 PM