Specifications

449
Practical hints
What to do if ...
5
The key can no longer be turned in the ignition
lock.
The on-board voltage is too low.  Remove the key and re-insert it into the
ignition lock.
 Switch off all non-essential consumers,
for example the seat heating, interior
lighting, and try to turn the key again.
If this does not work:
 Check the starter battery and charge it
if necessary.
or
 The engine may be jump-started
( page 581).
or
 Consult an authorized Sprinter
Dealer.
Problem Possible cause/result Suggested solutions
nf_BA.book Page 449 Friday, January 25, 2008 3:53 PM