2008 Sprinter 2008 OWNER’ S MANUAL 81-326-0899 First Edition Printed in U.S.A.
VEHICLES SOLD IN CANADA With respect to any Vehicles Sold in Canada, the name Chrysler LLC shall be deemed to be deleted and the name Chrysler Canada Inc. used in substitution therefor. DRIVING AND ALCOHOL Drunken driving is one of the most frequent causes of accidents. Your driving ability can be seriously impaired with blood alcohol levels far below the legal minimum. If you are drinking, don’t drive. Ride with a designated non-drinking driver, call a cab, a friend, or use public transportation.
nf_BA.book Page 1 Friday, January 25, 2008 3:53 PM Thank you for choosing the new Sprinter Vehicle. Before your first journey, please familiarize yourself with your vehicle and how it operates, as well as its driving, control and convenience functions. Before you drive off, read these Operating Instructions. This will help you get the most out of your vehicle and avoid endangering yourself and others.
nf_BA.book Page 2 Friday, January 25, 2008 3:53 PM Symbols Trademarks * Optional equipment G H Warning ESP® is a registered trademark of Chrysler Vans LLC.
nf_BA.book Page 3 Friday, January 25, 2008 3:53 PM Contents Introduction ............................5 1 At a glance ............................17 2 Safety .....................................33 3 Controls in detail ..................81 4 Operation ............................301 5 Practical hints ....................429 6 *Technical data .................599 Index.............................................
nf_BA.
nf_BA.book Page 5 Friday, January 25, 2008 3:53 PM Introduction Environmental protection Environmental protection Environmental note Introduction H Chrysler’s declared policy is one of comprehensive environmental protection. The objectives are for the natural resources which form the basis of our existence on this planet to be used sparingly and in a manner which takes the requirements of both nature and humanity into account.
nf_BA.book Page 6 Friday, January 25, 2008 3:53 PM Introduction Environmental protection Personal driving style Do not depress the accelerator pedal when starting the engine. Do not warm up the engine when the vehicle is stationary. Adopt an anticipatory style of driving and keep a sufficient distance from other vehicles. Avoid frequent, sudden acceleration. Switch off the engine in stationary traffic.
nf_BA.book Page 7 Friday, January 25, 2008 3:53 PM Introduction Operating safety Operating safety Warning G Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. In addition, certain fluids contained in vehicles, and certain products of component wear, contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
nf_BA.book Page 8 Friday, January 25, 2008 3:53 PM Introduction Operating safety Warning G Always have maintenance work carried out at an authorized Sprinter Dealer which has the necessary specialist knowledge and tools to carry out the work required. The manufacturer recommends that you use an authorized Sprinter Dealer for this purpose. In particular, work relevant to safety or on safety-related systems must be carried out at an authorized Sprinter Dealer.
nf_BA.
nf_BA.book Page 10 Friday, January 25, 2008 3:53 PM Introduction Operating safety Digital speedometer and total distance recorder Do not allow the electronically stored total distance covered by your vehicle to be modified as a result of tampering with the electronics system. This type of modification or failing to inform the buyer when selling the vehicle could constitute an offense punishable by law, depending on the country concerned.
nf_BA.book Page 11 Friday, January 25, 2008 3:53 PM Introduction Operating safety Vehicle alterations The manufacturer recommends the use of genuine Sprinter parts and conversion parts as well as accessories that have been expressly approved for your vehicle model ( page 600). These parts have been subjected to special tests in order to determine their safety, reliability and suitability.
nf_BA.book Page 12 Friday, January 25, 2008 3:53 PM Introduction Operating safety Body builders and dealers who make any modifications which may affect the final certification of the engine, vehicle or equipment assume the sole responsibility for the vehicle, including labeling and documentation, affected by their modifications.
nf_BA.book Page 13 Friday, January 25, 2008 3:53 PM Introduction Operating safety Stickers and warning labels Correct use Warning G Be sure to read the Operating Instructions. Otherwise, you may not be aware of certain risks and could injure yourself or others.
nf_BA.book Page 14 Friday, January 25, 2008 3:53 PM Introduction Operating safety In the USA: In Canada: Chrysler Vans LLC Customer Center P.O. Box 21-8004 Auburn Hills, MI 48321-8001 United States of America Telephone: 800-992-1997 Chrysler Canada, Inc. Customer Center P.O.
nf_BA.book Page 15 Friday, January 25, 2008 3:53 PM Introduction REPORTING SAFETY DEFECTS REPORTING SAFETY DEFECTS In the 50 United States and Washington D.C.: If you believe that your vehicle has a defect, which could cause a crash or cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying the manufacturer.
nf_BA.book Page 16 Friday, January 25, 2008 3:53 PM Introduction Information regarding electronic recording devices Information regarding electronic recording devices (Including notice pursuant to California Code § 9951) Please note that your vehicle is equipped with devices that can record vehicle systems data. This information helps, for example, to diagnose vehicle systems after a collision and to continuously improve vehicle safety.
nf_BA.book Page 17 Friday, January 25, 2008 3:53 PM At a glance At a glance Cockpit............. 18 Instrument cluster............. 20 1 Steering wheel with buttons*............. 25 Center console............. 26 Overhead control panel*............. 27 Switch units............. 28 Door control panel.............
nf_BA.book Page 18 Friday, January 25, 2008 3:53 PM At a glance Cockpit Cockpit 1 N68.
nf_BA.
nf_BA.
nf_BA.
nf_BA.book Page 22 Friday, January 25, 2008 3:53 PM At a glance Instrument cluster Function 1 c Fuel gauge with: Reserve fuel warning lamp Fuel filler flap location indicator Ö: Fuel filler flap is on the lefthand side 22 Page 145 475 i Indicator and Warning Lamps Vehicles without steering wheel buttons: Display 8 contains a digital fuel gauge. v ESP warning lamp Vehicles with steering wheel buttons*: The tachometer contains an analog fuel gauge.
nf_BA.
nf_BA.book Page 24 Friday, January 25, 2008 3:53 PM At a glance Instrument cluster Indicator and warning lamps Page Water in the fuel 1 482 # Battery charge malfunction 469 . Defective bulb 483 Handbrake applied 191 B Low-beam headlamps on 131 ™ Operating speed governor on* 273 A High-beam headlamps on 131 < Seat belt reminder 482 24 i Vehicles with steering wheel buttons: Corresponding messages may also be shown in display 9 ( page 157).
nf_BA.book Page 25 Friday, January 25, 2008 3:53 PM At a glance Steering wheel with buttons* Steering wheel with buttons* Function 1 Display Page 151 t Ends a call/ rejects an incoming call 151 4 To jump from one menu to another Controlling the operating system 2 To select a submenu or adjust the volume N46.
nf_BA.book Page 26 Friday, January 25, 2008 3:53 PM At a glance Center console Center console Function 1 Page 1 Storage compartment 2 Radio* or COMAND*, see the separate operating instructions 3 Air-conditioning control panel 218 4 Center console switch unit 28 N68.
nf_BA.
nf_BA.book Page 28 Friday, January 25, 2008 3:53 PM At a glance Switch units Switch units Center console switch unit Function 1 N54.25-2915-31 & i The number of switches may vary, depending on the vehicle’s equipment.
nf_BA.book Page 29 Friday, January 25, 2008 3:53 PM At a glance Switch units Additional switch units N54.
nf_BA.book Page 30 Friday, January 25, 2008 3:53 PM At a glance Switch units Function Switches the rear-compartment convenience interior lighting* on/off 1 Page 140 i N54.25-2912-31 Switch unit between the steering wheel and the ignition lock 30 The layout of the switches may vary, depending on the vehicle’s equipment.
nf_BA.book Page 31 Friday, January 25, 2008 3:53 PM At a glance Door control panel Door control panel Function N54.
nf_BA.
nf_BA.book Page 33 Friday, January 25, 2008 3:53 PM Safety Safety Occupant safety............. 34 Emergency exit............. 66 Driving safety systems............. 69 Anti-theft systems.............
nf_BA.book Page 34 Friday, January 25, 2008 3:53 PM Safety Occupant safety Occupant safety Restraint systems 2 This section contains all the most important information about the restraint systems in your vehicle. In an accident, your vehicle collides with another object, e.g. another vehicle. This may cause your vehicle to accelerate or decelerate extremely quickly. During this acceleration or deceleration, the vehicle occupants will be moved in the opposite direction to the force of the impact.
nf_BA.book Page 35 Friday, January 25, 2008 3:53 PM Safety Occupant safety This is partly because an airbag is not activated in all accident situations because in some cases it would not provide any additional protection to that already afforded by a correctly fastened seat belt.
nf_BA.book Page 36 Friday, January 25, 2008 3:53 PM Safety Occupant safety Warning (Continued) 2 G The airbags or emergency tensioning retractors could, for example, be activated inadvertently or could fail in accidents in which the deceleration force is sufficient to trigger the airbag. For this reason, do not modify the restraint systems. Do not tamper with electronic components or their software.
nf_BA.book Page 37 Friday, January 25, 2008 3:53 PM Safety Occupant safety G Warning Warning (Continued) G A seat belt that is worn incorrectly or not at all, or that is not correctly engaged in the seat belt buckle, cannot perform its intended protective function. In certain circumstances, you could be seriously or even fatally injured. Make sure, that all occupants – in particular, expectant mothers – wear their seat belt correctly at all times.
nf_BA.book Page 38 Friday, January 25, 2008 3:53 PM Safety Occupant safety Warning (Continued) 2 G A child must never be carried sitting on the lap of a vehicle occupant. It would not be possible to restrain the child, and the child and other vehicle occupants could be seriously or fatally injured in the event of abrupt braking or an accident. Persons less than 1.50 m tall or children under 12 years of age cannot wear their seat belt properly.
nf_BA.book Page 39 Friday, January 25, 2008 3:53 PM Safety Occupant safety Warning (Continued) G The belt strap could otherwise tear in the event of an accident. You or others could be seriously or fatally injured. Always have seats belts that are damaged or have been subjected to a heavy load in an accident replaced, and their anchorages checked, at a qualified specialist workshop which has the necessary specialist knowledge and tools to carry out the work required.
nf_BA.book Page 40 Friday, January 25, 2008 3:53 PM Safety Occupant safety Pull the belt smoothly from the seat belt reel holder. Route the belt over your shoulder. 2 Click belt latch plate 2 into buckle 4. Adjust the belt to the correct height if necessary. Pull the shoulder section of the belt upwards to tighten the belt against your body if necessary. Adjusting the belt height Warning G Only adjust the belt height when the vehicle is stationary and the handbrake is applied.
nf_BA.book Page 41 Friday, January 25, 2008 3:53 PM Safety Occupant safety To raise the belt height: slide belt sash guide 1 upward. Belt sash guide 1 engages in various positions. To lower the belt height: press and hold release button 5. Slide belt sash guide 1 to the desired height. Let go of release button 5 and make sure that belt sash guide 1 engages.
nf_BA.book Page 42 Friday, January 25, 2008 3:53 PM Safety Occupant safety Warning G A malfunction has occurred if the 1 warning lamp: 2 does not come on when you switch on the ignition does not go out after approximately 4 seconds lights up again Individual systems may be activated unintentionally or may not be triggered in the event of an accident with a high rate of vehicle deceleration.
nf_BA.book Page 43 Friday, January 25, 2008 3:53 PM Safety Occupant safety The front airbags are not triggered unless a second activation threshold is exceeded, i.e. if there is a greater rate of vehicle deceleration in a longitudinal direction.
nf_BA.
nf_BA.book Page 45 Friday, January 25, 2008 3:53 PM Safety Occupant safety i Emergency tensioning retractors do not correct: incorrect sitting positions incorrectly worn seat belts Emergency tensioning retractors do not pull occupants back towards the backrest. When the ignition is on, the emergency tensioning retractor is activated: only if the restraint systems are operational (the 1-warning lamp comes on for approximately 4 seconds after the ignition is switched on.) ( page 41).
nf_BA.book Page 46 Friday, January 25, 2008 3:53 PM Safety Occupant safety Warning (Continued) 2 G The manufacturer recommends that you use an authorized Sprinter Dealer for this purpose. In particular, work relevant to safety or on safety-related systems must be carried out at a qualified specialist workshop. Observe the safety regulations when disposing of emergency tensioning retractors. You can see a copy of these regulations at any authorized Sprinter Dealer.
nf_BA.book Page 47 Friday, January 25, 2008 3:53 PM Safety Occupant safety Warning (Continued) G Warning (Continued) G Warning (Continued) G Vehicle occupants should wear their seat belt correctly at all times and lean back against the backrest, which should be positioned as upright as possible. The head restraints should support the back of the head at about eye level.
nf_BA.book Page 48 Friday, January 25, 2008 3:53 PM Safety Occupant safety Warning (Continued) 2 G Do not cover the padded boss of the steering wheel, the passenger’s airbag cover, the windowbag cover or the thorax/sidebag cover with film or other material. Do not affix any badges or stickers to these areas. Do not hang any hard objects, for example coat hangers, on the grab handles or coat hooks.
nf_BA.book Page 49 Friday, January 25, 2008 3:53 PM Safety Occupant safety When the vehicle occupant makes contact with the airbag, hot gas flows out of the inflated airbag. This reduces the load on the head and upper body of the vehicle occupant. The airbag is therefore in a deflated state after an accident.
nf_BA.book Page 50 Friday, January 25, 2008 3:53 PM Safety Occupant safety Front airbags The front airbags are designed to increase protection to the driver’s and passenger’s/passengers' head and chest. 2 The driver’s airbag is located in the N91.60-2140-31 steering wheel housing; the passenger’s is above the glove box.
nf_BA.book Page 51 Friday, January 25, 2008 3:53 PM Safety Occupant safety Thorax sidebags* Warning Warning G For safety reasons, the manufacturer recommends that you use seat covers that have been tested for Sprinter vehicles and that have a seam for thorax/ sidebags. A thorax/sidebag may otherwise not inflate correctly and could fail to provide the intended degree of protection in the event of a collision. You can obtain these covers from an authorized Sprinter Dealer, for example.
nf_BA.book Page 52 Friday, January 25, 2008 3:53 PM Safety Occupant safety on the side on which an impact occurs if the system determines that airbag deployment can offer additional protection to that provided by the seat belt independently of the front airbags The purpose of the thorax/sidebags is to increase the level of protection for the thorax (but not the head, neck and arms) of the occupants on the side of the vehicle on which the impact occurs.
nf_BA.book Page 53 Friday, January 25, 2008 3:53 PM Safety Occupant safety i You will find additional information about airbag deployment on ( page 48). You will find additional information about the triggering of emergency tensioning retractors and belt force limiters on ( page 44).
nf_BA.book Page 54 Friday, January 25, 2008 3:53 PM Safety Occupant safety on the side on which an impact occurs independently of the front airbags The windowbags are designed to increase protection to the head (but not to the chest or arms) of the vehicle occupants on the side on which the impact occurs. i You will find additional information about airbag deployment on ( page 48). 2 The relevant windowbag is installed in the side of the roof frame behind the trim panel between the A and B-pillar.
nf_BA.book Page 55 Friday, January 25, 2008 3:53 PM Safety Occupant safety Children in the vehicle G If a child is traveling in the vehicle: secure the child in a child restraint system appropriate to his/her age and size, preferably on a suitable seat in the rear ensure that the child is strapped in throughout the trip Warning You can obtain child seats and information about the correct child restraint system from any authorized Sprinter Dealer.
nf_BA.book Page 56 Friday, January 25, 2008 3:53 PM Safety Occupant safety Warning (Continued) 2 G Do not carry heavy or hard objects inside the vehicle or load compartment unless they are secured. You will find further information under “Transporting” ( page 276) and “Features” ( page 287) in the “Controls in detail” section.
nf_BA.book Page 57 Friday, January 25, 2008 3:53 PM Safety Occupant safety To deactivate, release seat belt buckle and let seat belt retract completely. The seat belt can again be used in the usual manner. Warning G Never release the seat belt buckle while the vehicle is in motion, since the special seat belt retractor will be deactivated.
nf_BA.book Page 58 Friday, January 25, 2008 3:53 PM Safety Occupant safety Warning (Continued) 2 G A child must never be carried sitting on the lap of a vehicle occupant. It would not be possible to restrain the child as a result of the forces acting in the event of an accident, braking or abrupt changes in direction. The child would be thrown against parts of the vehicle interior and be seriously or fatally injured. Vehicle occupants must wear their seat belt correctly at all times.
nf_BA.book Page 59 Friday, January 25, 2008 3:53 PM Safety Occupant safety Warning G If you no longer require the child restraint system, remove it from the vehicle or secure it with the seat belt. The restraint system could otherwise be thrown through the vehicle interior in the event of an accident.
nf_BA.book Page 60 Friday, January 25, 2008 3:53 PM Safety Occupant safety The use of infant or child restraints is required by law in all 50 states, the District of Columbia, the U.S. territories and all Canadian provinces. Infants and small children should be 2 seated in an appropriate infant or child restraint system properly secured by a lap/shoulder belt or, if so equipped, a top tether anchorage point and a child restraint lower anchorage system that complies with U.S.
nf_BA.book Page 61 Friday, January 25, 2008 3:53 PM Safety Occupant safety ISOFIX child seat securing system/ Child seat anchors - LATCH type ISOFIX is a standardized securing system on the rear seats for special LATCH (Lower Anchors and Tethers for Children) child restraint systems with matching mounting fittings. N00.00-2620-31 Warning symbol for rearward-facing child seat i Non-LATCH type child seats may also be used and can installed using the vehicle’s seat belt system.
nf_BA.book Page 62 Friday, January 25, 2008 3:53 PM Safety Occupant safety Warning 2 G A LATCH type child restraint system that has been secured using the ISOFIX child seat securing system is unable to provide adequate protection for children who weigh more than 48 lbs (22 kg). For this reason, only secure children weighing less than 48 lbs (22 kg) in a LATCH type child restraint system secured using the ISOFIX child seat securing system.
nf_BA.book Page 63 Friday, January 25, 2008 3:53 PM Safety Occupant safety Warning G If the child restraint system or its securing system, for example the ISOFIX child seat securing system, are damaged or have been subjected to a load in an accident, the child secured in it could suffer severe or fatal injuries in the event of an accident, heavy braking or a sudden change of direction.
nf_BA.book Page 64 Friday, January 25, 2008 3:53 PM Safety Occupant safety Warning 2 G Do not leave children unsupervised in the vehicle, even if they are secured by a child restraint system. The children could: injure themselves on parts of the vehicle be seriously or even fatally injured by prolonged exposure to extreme heat or cold Warning G Do not expose child restraint systems to direct sunlight.
nf_BA.book Page 65 Friday, January 25, 2008 3:53 PM Safety Occupant safety Slide head restraint 1 upward. Guide TopTether belt 4 under head restraint 1 from the front and between the two head restraint bars. Hook TopTether hook 3 into TopTether anchorage 2 on the feet of the bench seat. If necessary, slide head restraint 1 back down a little ( page 121). Make sure that TopTether belt 4 can move freely. Install the LATCH type child restraint system with TopTether.
nf_BA.book Page 66 Friday, January 25, 2008 3:53 PM Safety Emergency exit Emergency exit Emergency exit window* 2 Warning The vehicle can be equipped with an emergency exit window. The emergency exit window is only intended for emergencies and may only be opened when the vehicle is stationary. In an emergency or following an accident, the occupants of the vehicle can exit the vehicle via the open emergency exit window.
nf_BA.book Page 67 Friday, January 25, 2008 3:53 PM Safety Emergency exit Warning (Continued) G Only vehicle occupants who are able to operate the emergency exit window are permitted to sit next to the emergency exit window. Access to the emergency exit window must be free of obstacles. Do not place any large or heavy objects on the seats or in front of the seats next to the emergency exit window. Do not use the window handles as hooks, e.g., for lightweight objects, bags or items of clothing.
nf_BA.book Page 68 Friday, January 25, 2008 3:53 PM Safety Emergency exit Warning 2 G If you continue your journey without closing and locking the emergency exit window, it may come out of its frame and cause an accident. You should, therefore, check the locking mechanism and safety bolts on the emergency exit window before setting out. The emergency exit window may only be opened when the vehicle is stationary. 68 !CAUTION To close: close the window.
nf_BA.
nf_BA.book Page 70 Friday, January 25, 2008 3:53 PM Safety Driving safety systems i Only use wheels with the recommended tire sizes ( page 623), otherwise the driving safety systems will not work correctly. 2 Antilock Brake System (ABS) ABS regulates the brake pressure in such a way that the wheels do not lock when you brake. This allows you to continue steering when braking. ABS works from a speed of about 3 mph (5 km/h) upwards, regardless of road surface conditions.
nf_BA.book Page 71 Friday, January 25, 2008 3:53 PM Safety Driving safety systems Braking If ABS intervenes during braking, you will feel the steering wheel vibrate gently and the brake pedal pulsate. If ABS intervenes: Continue to depress the brake pedal firmly until the braking situation is over. For full brake application: Depress the brake pedal with maximum force.
nf_BA.book Page 72 Friday, January 25, 2008 3:53 PM Safety Driving safety systems Vehicles without steering wheel buttons: There is a malfunction if the k indicator lamp is permanently lit while the engine is running ( page 73). 2 Warning G If BAS malfunctions, the brake system is still available with the full brake boosting effect. In an emergency braking situation, however, the braking force will not be additionally boosted automatically and the stopping distance may increase.
nf_BA.book Page 73 Friday, January 25, 2008 3:53 PM Safety Driving safety systems There is a malfunction if the # indicator lamp is permanently lit while the engine is running ( page 468). If ESP® malfunctions, engine power output may be reduced. !CAUTION Only operate the vehicle briefly (maximum of 10 seconds) on a brake dynamometer. The key must be turned to position 1 in the ignition lock during this time. You could damage the drive train or the brake system.
nf_BA.book Page 74 Friday, January 25, 2008 3:53 PM Safety Driving safety systems If the road surface is not capable of providing sufficient traction, bearing in mind the tires, load and gradient, it is not be possible to pull away smoothly even with ASR. 2 Vehicles without steering wheel but- tons: There is a malfunction if the k indicator lamp is permanently lit while the engine is running ( page 73). If ASR malfunctions, engine power output may be reduced.
nf_BA.book Page 75 Friday, January 25, 2008 3:53 PM Safety Driving safety systems Warning G The ASR switch is located on the center console. The v warning lamp in the speedometer lights up. ESP® remains active despite ASR having been deactivated and carries out braking interventions if this is necessary to improve driving stability. The v warning lamp flashes.
nf_BA.book Page 76 Friday, January 25, 2008 3:53 PM Safety Driving safety systems Electronic brake force distribution (EBV) EBV monitors and regulates the brake pressure at the rear wheels to improve driving stability during braking. 2 Warning G If EBV malfunctions, the brake system is still available with the full brake boosting effect. However, the rear wheels may lock, for example if the brakes are applied with maximum force. You could then lose control of the vehicle and cause an accident.
nf_BA.book Page 77 Friday, January 25, 2008 3:53 PM Safety Anti-theft systems Anti-theft systems Immobilizer The immobilizer prevents the vehicle from being started without the correct key. To switch on: remove the key from the ignition lock ( page 111). To switch off: switch on the ignition ( page 111).
nf_BA.book Page 78 Friday, January 25, 2008 3:53 PM Safety Anti-theft systems i The alarm system will be triggered if the vehicle has been locked with the key and is then unlocked from the inside. 2 Switching off the alarm Insert the key into the ignition lock. or Press the Πbutton ( page 83). The alarm is switched off. Tow-away protection* A visual and audible alarm is triggered if the inclination of the vehicle changes while tow-away protection is enabled.
nf_BA.book Page 79 Friday, January 25, 2008 3:53 PM Safety Anti-theft systems Turn the key to position 0 or 1 ( page 111) in the ignition lock or remove the key. i When the ignition is switched off ( page 111), you cannot deactivate tow-away protection. 1 To deactivate tow-away protection 2 Indicator lamp Press button 1. Indicator lamp 2 lights up for approximately 5 seconds after the button is released. Lock the vehicle using the key.
nf_BA.book Page 80 Friday, January 25, 2008 3:53 PM Safety Anti-theft systems Turn the key to position 0 or 1 ( page 111) in the ignition lock or remove the key. The interior motion sensor is enabled after approximately 40 seconds. i 2 Press button 1. Do not leave anything (for example mascots or coat hangers) hanging on the rear-view mirror or on the grab handles on the roof trim. This will prevent false alarms.
nf_BA.book Page 81 Friday, January 25, 2008 3:53 PM Controls in detail Controls in detail Opening and closing............. 83 Key positions........... 111 Seats........... 112 Steering wheel adjustment........... 127 Lighting........... 129 Instrument cluster........... 142 Operating system without steering wheel buttons........... 147 Operating system with steering wheel buttons*........... 151 Driving and parking........... 183 Automatic transmission........... 201 Good visibility...........
nf_BA.book Page 82 Friday, January 25, 2008 3:53 PM Controls in detail Air conditioning........... 215 Auxiliary heating/ventilation*........... 236 Open air........... 244 Driving systems........... 248 Operating the vehicle........... 273 3 Transporting........... 276 Features...........
nf_BA.book Page 83 Friday, January 25, 2008 3:53 PM Controls in detail Opening and closing Opening and closing Your vehicle is supplied with either 2 or 4* remote keyless entry transmitters or 4 keys* without remote control. Vehicle keys* which were not included with delivery must be activated before they can be used. You can obtain further information at any authorized Sprinter Dealer. When leaving the vehicle, always take the key* or remote keyless entry transmitter with you and lock the vehicle.
nf_BA.book Page 84 Friday, January 25, 2008 3:53 PM Controls in detail Opening and closing i Canada only: This device complies with RSS-210 of Industry Canada. 3 Remote controls with keys which were not included with delivery must be activated at an authorized Sprinter Dealer before they can be used. The remote keyless entry transmitter transmits in all directions. It does not have to be pointed at the vehicle. The remote keyless entry transmitter has an average range of about 32 ft (about 10 m).
nf_BA.book Page 85 Friday, January 25, 2008 3:53 PM Controls in detail Opening and closing Warning G Warning (Continued) G Do not leave children unsupervised in the vehicle, even if they are secured by a child restraint system.
nf_BA.book Page 86 Friday, January 25, 2008 3:53 PM Controls in detail Opening and closing i To prevent theft, only use the remote control in the immediate vicinity of the vehicle. In an emergency, the driver’s door and rear door can also be unlocked manually using the key. 3 As a precaution, both remote controls should always be carried. Checking the batteries Press the Œ or ‹ button for longer than 2 seconds.
nf_BA.book Page 87 Friday, January 25, 2008 3:53 PM Controls in detail Opening and closing Unlocking the vehicle centrally Locking the vehicle centrally Unlock the driver's door. Press the ‹ button. Press the Œ button within 2 seconds again. The turn signals flash once.
nf_BA.book Page 88 Friday, January 25, 2008 3:53 PM Controls in detail Opening and closing Locking and unlocking the vehicle with the key Unlocking the vehicle NCV2 If the doors can no longer be locked or unlocked with the remote control, you can lock and unlock the driver's door and the rear doors with the key. N72.10-2147-31 N72.10-2149-31 3 Rear door Driver's door 1 To lock 2 To unlock 1 To lock 2 To unlock Insert the key all the way into the door lock and turn it in direction 2.
nf_BA.book Page 89 Friday, January 25, 2008 3:53 PM Controls in detail Opening and closing i Locking the vehicle The anti-theft alarm system (ATA) is triggered when you open the vehicle using the key. Only the driver's door and the rear doors can be locked with the key. The alarm can be disabled in the following ways: Press the Πbutton on the remote control. or Insert the key into the ignition lock. For all other doors, press the locking knob down. Close the doors. The doors are locked.
nf_BA.book Page 90 Friday, January 25, 2008 3:53 PM Controls in detail Opening and closing You can open the driver’s/passenger’s door from the inside at any time, even if it is locked. Open door only when conditions are safe to do so. i Sliding door Warning G If the vehicle is parked on an incline, the sliding door may move of its own accord if it is open but not engaged. You or others could be trapped. 3 Make sure that the sliding door is engaged in the active retainer.
nf_BA.book Page 91 Friday, January 25, 2008 3:53 PM Controls in detail Opening and closing Opening/closing the sliding door from the outside i When you open/close the sliding door, you can also detent it around half way so that it is not always necessary to open the door to the end stop to get in and out of the vehicle. The intermediate detent does not fully engage the sliding door. To open: pull door handle 1 to open the sliding door.
nf_BA.book Page 92 Friday, January 25, 2008 3:53 PM Controls in detail Opening and closing Opening/closing the sliding door from the inside Open sliding door only when conditions are safe to do so. To unlock: pull locking knob 4 up. 3 Only this sliding door unlocks. The other doors remain locked. To open: press button 2 to open the unlocked sliding door. Hold door handle 3 and slide the sliding door towards the rear as far as the stop.
nf_BA.book Page 93 Friday, January 25, 2008 3:53 PM Controls in detail Opening and closing i Following a battery disconnection or malfunction, it is necessary to fully close the sliding door once by pressing and holding the switch on the center console or in the doorway ( page 93) and then to fully open and close the door once by pressing one of the switches briefly. This restores normal operation of the sliding door. If the electric drive of the sliding door is at risk of overheating, e.g.
nf_BA.book Page 94 Friday, January 25, 2008 3:53 PM Controls in detail Opening and closing i On vehicles with a partition, the switch is located on the partition near the doorway level with the inside door handle. N72.16-2119-31 3 Sliding door switch in the doorway (B-pillar) The indicator lamp in the switch flashes. The sliding door opens. To unlock the sliding door from inside: press lower part of the central locking switch on the center console ( page 104).
nf_BA.book Page 95 Friday, January 25, 2008 3:53 PM Controls in detail Opening and closing To stop the sliding door: press lower/upper part of the switch on the center console or press switch 3 in the doorway. The sliding door stops. To lock the sliding door from inside: press lower part of the central locking switch on the center console ( page 104). The indicator lamp in the switch comes on. or Press the locking knob of the sliding door down ( page 91).
nf_BA.book Page 96 Friday, January 25, 2008 3:53 PM Controls in detail Opening and closing The indicator lamp in the switch comes on. or Press the locking knob of the sliding door down ( page 91). i 3 The indicator lamp in the switch on the center console lights up whenever the sliding door is open. The sliding door can jam under unfavorable operating conditions such as frost, icing or heavy dirt.
nf_BA.book Page 97 Friday, January 25, 2008 3:53 PM Controls in detail Opening and closing Press button 1 again or pull outside door handle 2 again. The sliding door stops. Opening/closing with the remote control Programming the remote control If the vehicle is equipped with 2 sliding doors, it is only possible to program the remote control for one of the sliding doors. Press and hold the button for more than half a second.
nf_BA.book Page 98 Friday, January 25, 2008 3:53 PM Controls in detail Opening and closing Make sure that the doors are closed. Anti-trap protection Switch on the ignition ( page 111). Press and hold the upper part of relevant switch 1 or 2 on the center console for 5 seconds. 3 The indicator lamp in the switch for the sliding door concerned flashes and a warning tone sounds three times as confirmation.
nf_BA.book Page 99 Friday, January 25, 2008 3:53 PM Controls in detail Opening and closing Resetting the sliding door: Close the sliding door completely once by pressing and holding down the switch on the center console or in the doorway. Rear doors You can fix the rear doors in place at an angle of approximately 90° or 270°. Then Warning Open and close the sliding door completely once by pressing and releasing one of the switches.
nf_BA.book Page 100 Friday, January 25, 2008 3:53 PM Controls in detail Opening and closing Opening the right-hand rear door from the outside Always make sure that the open rear door is correctly engaged in the detent. Opening the left-hand rear door from the outside 3 1 Handle Pull handle 1. Swing the rear door out to the side until it engages. 100 1 Release lever Make sure that the right-hand rear door is open and engaged. Pull release lever 1 in the direction of the arrow.
nf_BA.book Page 101 Friday, January 25, 2008 3:53 PM Controls in detail Opening and closing Opening the rear doors to an angle of 270° Pull door retainer 1 in the direction of the arrow and hold it firmly. Open the rear door beyond 90° so that the door retainer can no longer engage. Release the door retainer and open the door to an angle of 270°. 3 Warning 1 Door retainer Open the rear door to an angle of approximately 45°.
nf_BA.book Page 102 Friday, January 25, 2008 3:53 PM Controls in detail Opening and closing When the magnet on the rear door is in contact with magnetic door retainer 2, the rear door is held in this position. i 3 If you prefer to keep door retainer 1 ( page 101) out of the loading area when loading the vehicle, you can swivel it 180° against the spring pressure and onto the door, where it engages. The door retainer then remains in this position and no longer returns to its original position.
nf_BA.book Page 103 Friday, January 25, 2008 3:53 PM Controls in detail Opening and closing To unlock: slide catch 2 to the left. Opening/closing the rear door from the inside You will see a white marking. Only the rear door is unlocked. The other doors remain locked. The opening lever is on the inside of the right-hand rear door. If a white marking is visible, this indicates that the rear door is unlocked. Open rear doors only when conditions are safe to do so.
nf_BA.book Page 104 Friday, January 25, 2008 3:53 PM Controls in detail Opening and closing To close: make sure that the lefthand rear door is closed. Pull the right-hand rear door firmly closed by the door handle. To lock: slide catch 2 to the right. Only the rear door is locked. 3 The white marking is no longer visible.
nf_BA.book Page 105 Friday, January 25, 2008 3:53 PM Controls in detail Opening and closing N54.25-2917-31 1 To lock/unlock the entire vehicle 2 To lock/unlock the sliding doors and rear door i Locking the entire vehicle If the key is in position 0 or no longer in the ignition lock, the indicator lamp in the central locking switch lights up for 5 seconds after it is pressed. It lights up permanently if the key is in position 1 or 2 in the ignition lock.
nf_BA.book Page 106 Friday, January 25, 2008 3:53 PM Controls in detail Opening and closing Locking the sliding doors and the rear door Press lower part 2 of the switch when the doors are closed. The indicator lamp in the switch comes on. 3 Unlocking the sliding doors and the rear door Press lower part 2 of the switch. The indicator lamp in the switch goes out. 106 Automatic locking As a standard feature on all vehicles, all doors lock automatically when a speed of 9 mph (15 km/h) is reached.
nf_BA.book Page 107 Friday, January 25, 2008 3:53 PM Controls in detail Opening and closing !CAUTION i If your vehicle is centrally locked, this could hinder rescue operations from the outside in the event of an accident. For information about different settings, please contact your authorized Sprinter Dealer. When the automatic locking when driving function is activated, there is a risk of being locked out if the vehicle is pushed or towed.
nf_BA.book Page 108 Friday, January 25, 2008 3:53 PM Controls in detail Opening and closing Deactivating the automatic locking function for the entire vehicle Close all the doors. Turn the key to position 1 or 2 in the ignition lock ( page 111). 3 Press upper part 1 of the switch. Keep it pressed for approximately 5 seconds. The indicator lamp in the switch flashes twice.
nf_BA.book Page 109 Friday, January 25, 2008 3:53 PM Controls in detail Opening and closing Partition sliding door* The partition sliding door is in the partition between the cab and the load compartment. Warning Operating the partition sliding door from inside the cab To open: turn the key counterclockwise 3. The sliding door is unlocked. Slide the sliding door to the right as far as the stop 2. G To close: slide the sliding door to the left until it engages 1.
nf_BA.book Page 110 Friday, January 25, 2008 3:53 PM Controls in detail Opening and closing Operating the partition sliding door from inside the load compartment To open: press the lever to the right 3. The sliding door is unlocked. Slide the sliding door to the left as far as the stop 1. To close: slide the sliding door to the right until it engages 2.
nf_BA.book Page 111 Friday, January 25, 2008 3:53 PM Controls in detail Key positions Key positions 0 To remove the key, to lock the steering wheel 1 To unlock the steering wheel (power supply for some consumers, e.g. radio) 2 To switch on the ignition (power supply for all consumers) Preglow1 and drive position 3 To start i The key can only be removed from position 0. Also observe the notes in the “Driving and parking” section ( page 183).
nf_BA.book Page 112 Friday, January 25, 2008 3:53 PM Controls in detail Seats Seats Driver’s and passenger’s seats Warning 3 G Only adjust the seats when the vehicle is stationary and the handbrake is applied. You could otherwise lose control of the vehicle as a result of the seat moving and cause an accident. Warning G G Observe the following points: Avoid seat positions that do not allow the seat belt to be routed correctly.
nf_BA.book Page 113 Friday, January 25, 2008 3:53 PM Controls in detail Seats Warning (Continued) G The distance from the pedals should be such that you can depress them fully. Adjust the head restraint in such a way that the upper edge of the head restraint is level with your head. Warning G Avoid seat positions in which you cannot wear your seat belt correctly. They are a safety hazard and must therefore be avoided. 3 Make sure that you hear the seat engage.
nf_BA.book Page 114 Friday, January 25, 2008 3:53 PM Controls in detail Seats Standard, comfort* and suspension* seats 1 2 3 4 5 6 7 Seat fore-and-aft adjustment Lumbar support adjustment Backrest adjustment Seat height adjustment Seat angle adjustment Seat suspension adjustment Suspension lock lever i 3 Different settings are possible, depending on the seat version. Seat fore-and-aft adjustment Pull lever 1 up. Slide the seat forwards or backwards until you can reach the pedals and depress them.
nf_BA.book Page 115 Friday, January 25, 2008 3:53 PM Controls in detail Seats Seat height adjustment Push or pull lever 4 repeatedly until you have reached the desired seat height. Seat angle adjustment* Turn thumbwheel 5 forward. The front of the seat cushion tilts down. Lumbar support adjustment* i Using the lumbar support, you can increase the level of support that the backrest provides to your spinal column. Turn thumbwheel 2 upward. This increases the support provided to your lumbar region.
nf_BA.book Page 116 Friday, January 25, 2008 3:53 PM Controls in detail Seats Seat suspension adjustment* Suspension lock* The seat suspension must be adjusted to your body weight. Only adjust the seat suspension when the seat is unoccupied. If the seat bounces up and down frequently, you can engage the seat the lower position of its suspension travel. Relieve the load on the seat. 3 Select your body weight 88 to 265 lbs (40 to 120 kg) using thumbwheel 6 for optimal seat suspension.
nf_BA.book Page 117 Friday, January 25, 2008 3:53 PM Controls in detail Seats Warning G The driver’s and passenger’s seat must be adjusted and properly engaged in the direction of travel for driving. Otherwise you will not be able to operate the vehicle safely. The restraint systems in your vehicle will only function as intended when the driver’s and passenger’s seat are engaged in the direction of travel.
nf_BA.book Page 118 Friday, January 25, 2008 3:53 PM Controls in detail Seats Warning 3 G The seat release lever is located behind the seat between the seat backrest and the seat base. Make sure nobody can become trapped when unlocking and turning the seats. Never hold your hands under the seat or near moveable parts when turning the seats. The turning device is unlocked. Release lever 1 again. Turn the seat inwards to the desired position.
nf_BA.book Page 119 Friday, January 25, 2008 3:53 PM Controls in detail Seats Warning G You could knock yourself against the unprotected pivoting frame if the seat is opposite of the direction of travel and pushed right back in a longitudinal direction. Therefore, center the seat above the seat base whenever you leave it. Point out this danger to passengers.
nf_BA.book Page 120 Friday, January 25, 2008 3:53 PM Controls in detail Seats Pull the seat cushion towards the front slightly and out of rear anchorage 2. Fold the seat cushion up by the rear edge. 3 Positioning the seat cushion Armrests* Fold the seat cushion back. Slide the seat cushion under the backrest and into rear anchorage 2. i Fold the seat cushion down. You can store various articles in the space under the twin passenger’s seat.
nf_BA.book Page 121 Friday, January 25, 2008 3:53 PM Controls in detail Seats Adjusting the armrest angle Fold the armrest up by an angle of more than 45° to unlock it 2. Fold the armrest forward to the stop 3. There are six closely spaced positions in which the armrest can engage if you raise it. Folding up the armrest If you do not wish to use the armrest, fold it up by an angle of more than 90° 1.
nf_BA.book Page 122 Friday, January 25, 2008 3:53 PM Controls in detail Seats To raise: pull the head restraint up to the desired position. To lower: press release button 1 and slide the head restraint down to the desired position. 3 To adjust the angle: hold the head restraint by the lower edge and fold it to the desired position.
nf_BA.book Page 123 Friday, January 25, 2008 3:53 PM Controls in detail Seats Normal heating To switch on: press upper part of the & switch. An indicator lamp in the switch comes on. To switch off: press upper part of the & switch again. The indicator lamp in the switch goes out. Rapid heating To switch on: press lower part of the switch. Both indicator lamps in the switch come on. To switch off: press lower part of the switch again. The folding seat is on the co-driver’s side.
nf_BA.book Page 124 Friday, January 25, 2008 3:53 PM Controls in detail Seats Warning G When folding down the seat cushion, make sure that nobody can become trapped. 3 The Warning to the co-driver is increased in the event of sudden steering movements or an accident if there is a key inserted in the partition sliding door lock. Remove the key from the partition sliding door before using the folding seat. Remove key 1 from partition sliding door. Fold seat cushion 2 down or up.
nf_BA.book Page 125 Friday, January 25, 2008 3:53 PM Controls in detail Seats Warning (Continued) G For reasons of safety, only have seat mounting cups retrofitted at an authorized Sprinter Dealer. Removing the rear bench seat with 2 or 3 seats Turn all levers 1 for the bench seat fully upward. The locking lever is located underneath the bench seat, on the feet of the bench seat. The rear bench seat moves back into the seat mounting cups on the vehicle floor.
nf_BA.book Page 126 Friday, January 25, 2008 3:53 PM Controls in detail Seats Installing the rear bench seat with 2 or 3 seats Observe the specified installation location for the rear bench seat. A rear bench seat with 2 seats may only be installed left-sided. Check seat mounting cups 2 on the vehicle floor. Seat mounting cups 2 must be kept free from dirt and foreign objects.
nf_BA.book Page 127 Friday, January 25, 2008 3:53 PM Controls in detail Steering wheel adjustment Steering wheel adjustment Warning G Only adjust the steering wheel when the vehicle is stationary. Only drive with the steering wheel locked in position. An incorrectly secured steering wheel could make it more difficult to steer the vehicle safely, since the height and foreand-aft adjustment could move out of position when the steering wheel is turned.
nf_BA.book Page 128 Friday, January 25, 2008 3:53 PM Controls in detail Steering wheel adjustment Swing lever 3 down to the stop. The steering wheel is unlocked. Move the steering wheel to the desired position. Pull lever 3 up to the stop. N46.15-2032-31 3 1 Steering column fore-and-aft adjustment 2 Steering column height 3 Lever 128 The steering wheel is locked again.
nf_BA.book Page 129 Friday, January 25, 2008 3:53 PM Controls in detail Lighting Lighting Legal requirements may impose variations in certain countries. i If you are traveling in countries where vehicles are driven on the opposite side of the road to that in which the vehicle is registered, you must have the headlamps: partially masked (halogen headlamps) switched over (bi-xenon headlamps) You will find further information in the “Operation” section ( page 311).
nf_BA.book Page 130 Friday, January 25, 2008 3:53 PM Controls in detail Lighting i Depending on the equipment version, the lamp failure monitor may not monitor all lamps (with the exception of the turn signals)*. Warning G The lamp failure monitor is only an aid. You are responsible for making sure that the vehicle lighting is functioning correctly at all times. Light switch The light switch is located between the driver’s door and the steering wheel.
nf_BA.book Page 131 Friday, January 25, 2008 3:53 PM Controls in detail Lighting U Automatic headlamp control* M Lights off C Parking lamps, license plate and instrument lighting on B Low-beam headlamps on Switching on the low-beam headlamps Turn light switch to B. N82.10-2527-31 The B indicator lamp in the instrument cluster lights up. Switching on the high-beam headlamps The combination switch is located on the left of the steering wheel.
nf_BA.book Page 132 Friday, January 25, 2008 3:53 PM Controls in detail Lighting Press combination switch forward 1. The indicator lamp A in the instrument cluster lights up. Headlamp flasher 3 Turn key to position 1 in ignition lock ( page 111). Pull combination switch briefly in direction 2. Constant headlamp mode* Automatic headlamp control* On vehicles with steering wheel buttons, you can set constant headlamp mode ( page 171).
nf_BA.book Page 133 Friday, January 25, 2008 3:53 PM Controls in detail Lighting Warning G If the light switch is at U: the headlamps could switch off temporarily due to extreme glare, e.g. from oncoming traffic the lights do not switch on automatically in foggy conditions Set the light switch to B. Otherwise you are endangering yourself and others. Continued Warning (Continued) G If it is dark, only turn the light switch from U to B when the vehicle is stationary.
nf_BA.book Page 134 Friday, January 25, 2008 3:53 PM Controls in detail Lighting Front foglamps*/rear foglamp i 3 The light switch is located between the driver’s door and the steering wheel. Foglamps will operate with the parking lamps and/or the low beam headlamps on. Foglamps should only be used in conjunction with low beam headlamps. Consult your State or Province Motor Vehicle Regulations regarding permissible lamp operation.
nf_BA.book Page 135 Friday, January 25, 2008 3:53 PM Controls in detail Lighting Switching on the rear foglamp i Make sure that the parking lamps or low-beam headlamps are switched on. To indicate minor directional changes such as changing lanes, press the combination switch only to point of resistance and release. The corresponding turn signals will flash three times. N82.10-2528-31 Pull light switch 1 out to the second detent. The † yellow indicator lamp next to the light switch comes on.
nf_BA.book Page 136 Friday, January 25, 2008 3:53 PM Controls in detail Lighting Hazard warning lamps The hazard warning lamps still operate if the ignition is switched off and the key is removed. The switch is located on the center console. 3 N54.25-2919-31 1 Hazard warning lamps switch 136 To switch on: press the hazard warning lamps switch. All turn signals and the switch flash. To switch off: press the hazard warning lamps switch again.
nf_BA.book Page 137 Friday, January 25, 2008 3:53 PM Controls in detail Lighting Front interior lighting Front interior lighting with overhead control panel* Standard front interior lighting Automatic control The front interior lighting (but not the rear interior lamps) comes on if you: unlock the vehicle open a door remove the key from the ignition lock The front interior lighting switches off again automatically.
nf_BA.book Page 138 Friday, January 25, 2008 3:53 PM Controls in detail Lighting i i The interior lighting switches off after approximately 20 minutes if it is controlled automatically and if a door remains open. If you switch a lamp on manually, it switches off automatically after 20 minutes on vehicles with an overhead control panel. Manual control Switching the reading lamps on/off 3 Press button 6. Press button 1 or 2. Reading lamp 3 or 7 comes on. Front interior lamps 4 come on.
nf_BA.book Page 139 Friday, January 25, 2008 3:53 PM Controls in detail Lighting i The rear interior lamps switch off automatically after 20 minutes if a sliding door or rear door is open. There is a switch on each rear interior lamp, which can be used to switch the lamp concerned on/off separately, regardless of the position of the master control switch.
nf_BA.book Page 140 Friday, January 25, 2008 3:53 PM Controls in detail Lighting Rear interior lighting master control switch 1 To switch on the rear interior lighting 2 Automatic control 3 To switch off the rear interior lighting To switch on: press upper part 1 of the switch. 3 The rear interior lamps are switched on when the switches on the rear interior lamps ( page 139) are not in Off position 2. To switch off: press lower part 3 of the switch.
nf_BA.book Page 141 Friday, January 25, 2008 3:53 PM Controls in detail Lighting Load compartment motion detector* i On panel vans equipped with a motion detector in the load compartment, the rear interior lighting may also switch on if motion is detected. If the motion detector detects movement in the load compartment when the vehicle is stationary, the rear interior lighting switches on for approximately 2 minutes.
nf_BA.book Page 142 Friday, January 25, 2008 3:53 PM Controls in detail Instrument cluster Instrument cluster i Instrument cluster Do not hang any objects (e.g. coats) in the load compartment. This will help to prevent the motion detector from inadvertently switching on the rear interior lamps. 3 You will find a full overview of the instrument cluster in the “At a glance” section ( page 20). N54.
nf_BA.
nf_BA.book Page 144 Friday, January 25, 2008 3:53 PM Controls in detail Instrument cluster Warning (Continued) G Only use adjustment buttons , , , or when traffic conditions permit. You will otherwise be unable to observe road and traffic conditions and could cause an accident. 3 Do not reach through the steering wheel to press the adjustment buttons. This will make the steering wheel much more difficult to control. Your attention will also be diverted from the road and traffic conditions.
nf_BA.book Page 145 Friday, January 25, 2008 3:53 PM Controls in detail Instrument cluster Tachometer The red band in the tachometer indicates the engine’s overrevving range. !CAUTION Do not drive in the overrevving range. Doing so could damage the engine. To protect the engine, the fuel supply is interrupted when the red band is reached. Environmental note H Fuel gauge Avoid high engine speeds.
nf_BA.book Page 146 Friday, January 25, 2008 3:53 PM Controls in detail Instrument cluster Fuel gauge 1 Vehicles without steering wheel buttons 2 Vehicles with steering wheel buttons* 3 Fuel filler flap location indicator Ö: The fuel filler cap is on the left-hand side 3 4 146 Reserve fuel warning lamp ( page 475) Trip meter Resetting the trip meter Vehicles with steering wheel buttons*: Make sure that the display is showing the trip meter ( page 157).
nf_BA.book Page 147 Friday, January 25, 2008 3:53 PM Controls in detail Operating system without steering wheel buttons Operating system without steering wheel buttons The operating system is activated as soon as you switch on the ignition. You may perform the following using the operating system: Call up vehicle information Make settings Warning G Only use adjustment buttons , , or when traffic conditions permit.
nf_BA.book Page 148 Friday, January 25, 2008 3:53 PM Controls in detail Operating system without steering wheel buttons Standard display Changing the standard display Outside temperature display* Switch on the ignition ( page 111). N54.32-2281-31 3 1 Odometer 2 Trip meter 3 Time 4 Outside temperature* or digital speedometer 5 Fuel gauge ( page 145) 6 Selector lever position or current shift range 148 Press and hold the menu button for more than 1 second.
nf_BA.book Page 149 Friday, January 25, 2008 3:53 PM Controls in detail Operating system without steering wheel buttons There may be a short delay before a lower outside temperature is displayed, for example after leaving a garage. There may also be a short delay before a rise in the outside temperature is displayed. This prevents you from seeing a temperature display influenced by heat from the engine when the vehicle is stationary or moving slowly.
nf_BA.book Page 150 Friday, January 25, 2008 3:53 PM Controls in detail Operating system without steering wheel buttons Setting the time Setting the date i Switch on the ignition ( page 111). Switch on the ignition ( page 111). Press menu button repeatedly until the hours figure flashes. Press menu button repeatedly until the day flashes. If you keep the button pressed, the values will change continuously. Set the hour using the ton. Set the day using the ton.
nf_BA.book Page 151 Friday, January 25, 2008 3:53 PM Controls in detail Operating system with steering wheel buttons* Operating system with steering wheel buttons* The operating system is activated as soon as you switch on the ignition. You may perform the following using the operating system: Call up vehicle information Make settings You can use this not only to find out when the next service is due, but also to set the language for messages in the instrument cluster, for example, and much more.
nf_BA.book Page 152 Friday, January 25, 2008 3:53 PM Controls in detail Operating system with steering wheel buttons* 1 Display Controlling the operating system 2 Selects a submenu or adjusts the volume 3 N46.
nf_BA.book Page 153 Friday, January 25, 2008 3:53 PM Controls in detail Operating system with steering wheel buttons* Several functions are combined thematically in the menus. The display changes when you press one of the buttons on the steering wheel. For example, the AUDIO menu contains functions for controlling the radio* or CD player*. You can use a function to call up information or to change the settings for the vehicle.
nf_BA.book Page 154 Friday, January 25, 2008 3:53 PM Controls in detail Operating system with steering wheel buttons* Menu overview This is what the display looks like when you scroll through the menus. 3 N54.32-2282-31 154 The explanations for the individual menus are shown in the following table.
nf_BA.
nf_BA.
nf_BA.book Page 157 Friday, January 25, 2008 3:53 PM Controls in detail Operating system with steering wheel buttons* Standard display Operation menu In the Operation menu, you can select the following functions using the j or k button: Function In its basic setting, you will see the odometer and the trip meter in the upper part of the display. This is referred to as the standard display.
nf_BA.book Page 158 Friday, January 25, 2008 3:53 PM Controls in detail Operating system with steering wheel buttons* Displaying the coolant temperature Press the j or k button repeatedly until you see the coolant temperature in the display. temperature to rise to the end of the scale at high outside temperatures and when driving in mountainous terrain. Selecting a radio station Audio menu* You can use the functions in the Audio menu to control the audio equipment that you have just switched on.
nf_BA.book Page 159 Friday, January 25, 2008 3:53 PM Controls in detail Operating system with steering wheel buttons* Operating the CD player Switch on the radio and select the CD player. See the separate operating instructions. 1 Reception frequency 2 Waveband, with memory location number if set Press the è or · button repeatedly until the settings for the CD being played are displayed. Press the j or k button repeatedly until you have set the desired track.
nf_BA.book Page 160 Friday, January 25, 2008 3:53 PM Controls in detail Operating system with steering wheel buttons* Malfunction memory menu The Malfunction memory menu displays malfunctions that may have occurred. The message in the display depends on whether malfunctions have occurred or not. 3 Warning G The operating system only records and shows malfunctions and warnings from certain systems. Therefore, make sure that your vehicle is safe to use.
nf_BA.book Page 161 Friday, January 25, 2008 3:53 PM Controls in detail Operating system with steering wheel buttons* i The malfunction memory is cleared when you switch off the ignition. If any new malfunctions occur, they will be displayed again. Settings menu The Settings menu has two functions: the To reset: Press reset button for 3 sec.
nf_BA.book Page 162 Friday, January 25, 2008 3:53 PM Controls in detail Operating system with steering wheel buttons* Resetting settings i Resetting the functions of a submenu You can reset the functions in all submenus to the factory defaults. If you do not press the reset button a second time to confirm, the changed settings remain set. The Settings menu is displayed again after approximately 5 seconds. You can reset the functions of an individual submenu to the factory defaults.
nf_BA.book Page 163 Friday, January 25, 2008 3:53 PM Controls in detail Operating system with steering wheel buttons* i Submenus in the Settings menu If you do not press the reset button a second time to confirm, the changed settings remain set. The Settings menu is displayed again after approximately 5 seconds. Press the j button. For safety reasons, it is not possible to reset all of the functions while the vehicle is in motion. For example, the Hdlmp.
nf_BA.
nf_BA.book Page 165 Friday, January 25, 2008 3:53 PM Controls in detail Operating system with steering wheel buttons* Instrument cluster submenu Selecting the unit for the temperature You can reach the Inst. cluster submenu via the Settings menu ( page 161). Select the Inst. cluster submenu using the æ or ç button.
nf_BA.book Page 166 Friday, January 25, 2008 3:53 PM Controls in detail Operating system with steering wheel buttons* Press the j or k button repeatedly until you see the Trip message in the display. N54.32-2257-31 3 Press the æ or ç button to select the unit for all messages in the display: km/h or mph (kilometers or miles per hour). Selecting the unit for the odometer Select the Inst. cluster submenu using the æ or ç button. 166 The current setting is highlighted. N54.
nf_BA.book Page 167 Friday, January 25, 2008 3:53 PM Controls in detail Operating system with steering wheel buttons* Use the æ or ç button to select the language in which the operating system messages are to be displayed. You can select: German (Deutsch) British English American English Selecting the display for the status line Select the Inst. cluster submenu using the æ or ç button. Press the j or k button repeatedly until you see the Select displ. message in the display.
nf_BA.book Page 168 Friday, January 25, 2008 3:53 PM Controls in detail Operating system with steering wheel buttons* Selecting the unit for the tire pressure Clock/Date submenu Setting the hours Select the Inst. cluster submenu using the æ or ç button. You can reach the Clock/Date submenu via the Settings menu ( page 161). Select the Clock/Date submenu using the æ or ç button. Press the j or k button repeatedly until you see the Tire pres. message in the display.
nf_BA.book Page 169 Friday, January 25, 2008 3:53 PM Controls in detail Operating system with steering wheel buttons* Setting the minutes Selecting the time format Setting the day Select the Clock/Date submenu using the æ or ç button. Select the Clock/Date submenu using the æ or ç button. Select the Clock/Date submenu using the æ or ç button. Press the j or k button repeatedly until you see the Set clock Minutes message in the display.
nf_BA.book Page 170 Friday, January 25, 2008 3:53 PM Controls in detail Operating system with steering wheel buttons* Setting the month Setting the year Lighting submenu* Select the Clock/Date submenu using the æ or ç button. Select the Clock/Date submenu using the æ or ç button. You can reach the Lighting submenu via the Settings menu ( page 161). Press the j or k button repeatedly until you see the Date Month message in the display.
nf_BA.book Page 171 Friday, January 25, 2008 3:53 PM Controls in detail Operating system with steering wheel buttons* Setting constant headlamp mode* If you have set constant headlamp mode and the light switch is at M, the following light up automatically when the engine is running: The parking lamps and low-beam headlamps The tail lamps The license plate lamp For safety reasons, it is only possible to change this setting when the vehicle is stationary.
nf_BA.book Page 172 Friday, January 25, 2008 3:53 PM Controls in detail Operating system with steering wheel buttons* USA only: If you turn the light switch to C or B, the corresponding light switches on. Constant headlamp mode remains activated if the light switch is turned to U. 3 Canada only: If you turn the light switch to B, the low-beam headlamps are switched on. Constant headlamp mode remains activated if the light switch is turned to C or U.
nf_BA.book Page 173 Friday, January 25, 2008 3:53 PM Controls in detail Operating system with steering wheel buttons* Setting the exterior lighting delayed switch-off* N54.32-2269-31 Press the æ or ç button to switch the locator lighting On or Off. The Headlamps (headlamps delayed switch-off) function enables you to set whether or not the exterior lighting should remain on in the dark after the doors have been closed.
nf_BA.book Page 174 Friday, January 25, 2008 3:53 PM Controls in detail Operating system with steering wheel buttons* Setting station selection N54.32-2270-31 3 Press the æ or ç button to select whether and for how long the lights should remain on. Vehicle submenu You can reach the Vehicle submenu via the Settings menu ( page 161).
nf_BA.book Page 175 Friday, January 25, 2008 3:53 PM Controls in detail Operating system with steering wheel buttons* Setting the windshield wiper sensitivity You can use the Wipe sensor function to set the sensitivity of the rain sensor. Press the è or ÿ button repeatedly until you see the Vehicle message in the display. Press the j or k button repeatedly until you see the Wipe sensor message in the display. The current setting is highlighted. Convenience submenu* N54.
nf_BA.book Page 176 Friday, January 25, 2008 3:53 PM Controls in detail Operating system with steering wheel buttons* Press the j or k button repeatedly until you see the Key message in the display. The current setting is highlighted. N54.32-2273-31 3 i Function For safety reasons, it is not possible to set the Key function while the vehicle is in motion.
nf_BA.book Page 177 Friday, January 25, 2008 3:53 PM Controls in detail Operating system with steering wheel buttons* Consumption statistics after start i Press the è or ÿ button repeatedly until you see the After start message in the display. If you turn the key to position 0 in the ignition lock or remove it, all the values are reset after approximately 4 hours. N54.32-2274-31 The values will not be reset if you turn the key back to position 1 or 2 during this time.
nf_BA.book Page 178 Friday, January 25, 2008 3:53 PM Controls in detail Operating system with steering wheel buttons* Resetting the consumption statistics i Press the è or ÿ button repeatedly until you see the After start message in the display. The consumption statistics after start are automatically reset after 999 hours or 9,999 miles (kilometers). Press the j or k button repeatedly until you see the statistics that you want to reset in the display.
nf_BA.book Page 179 Friday, January 25, 2008 3:53 PM Controls in detail Operating system with steering wheel buttons* Warning (Continued) G If it is permitted to operate a cell phone while the vehicle is in motion, you must only operate it when road and traffic conditions permit. You may otherwise be distracted from the traffic conditions, cause an accident and injure yourself and others.
nf_BA.book Page 180 Friday, January 25, 2008 3:53 PM Controls in detail Operating system with steering wheel buttons* Rejecting a call Ending a call If you do not wish to speak to the person who is calling, you can reject the call. Press the t button. Press the t button. The caller then hears the busy signal. 3 Accepting a call You can accept a call at any time, provided the cell phone is ready to receive calls. Press the s button. The call duration is shown in the display.
nf_BA.book Page 181 Friday, January 25, 2008 3:53 PM Controls in detail Operating system with steering wheel buttons* The stored names are displayed alphabetically from A to Z, or Z to A. i The operating system scrolls through the names rapidly if you press and hold the j or k button for more than one second. Releasing the button stops the rapid scroll. If you no longer wish to make a call, press the t button. Press the s button. Redialing The operating system dials the selected phone number.
nf_BA.book Page 182 Friday, January 25, 2008 3:53 PM Controls in detail Operating system with steering wheel buttons* Press the j or k button repeatedly until the number or the name you are looking for is displayed. Press the s button. The operating system dials the selected phone number. 3 If a connection is made, you will see the call duration and name of the person you are calling if stored in the phone book. Otherwise, the number you are dialing continues to be displayed.
nf_BA.book Page 183 Friday, January 25, 2008 3:53 PM Controls in detail Driving and parking Driving and parking Warning G The movement of the pedals must not be obstructed. The vehicle’s operating and road safety are otherwise jeopardized. Objects could fall and get caught between the pedals if you accelerate or brake suddenly. You will no longer be able to brake or accelerate. You could cause an accident, which could result in injury to yourself and others.
nf_BA.book Page 184 Friday, January 25, 2008 3:53 PM Controls in detail Driving and parking You will find information on: regular checks ( page 312) driving in winter ( page 406) driving when towing a trailer ( page 303) and other driving tips in the “Operation” section 3 ( page 301). Starting the engine Warning Warning G Never run the engine in an enclosed space. The exhaust fumes contain poisonous carbon monoxide.
nf_BA.book Page 185 Friday, January 25, 2008 3:53 PM Controls in detail Driving and parking !CAUTION Automatic transmission Do not depress the accelerator pedal when starting the engine. Make sure that the automatic transmission is in parking position P before starting the engine. i i It is also possible to start the engine in neutral N. If you depress the brake pedal when starting the engine, pedal travel may be short and the pedal resistance may be high.
nf_BA.book Page 186 Friday, January 25, 2008 3:53 PM Controls in detail Driving and parking Starting the engine Gasoline engine Turn the key to position 3 in the ignition lock ( page 111) and release it immediately ("touch-start" function). The engine starts automatically. 3 As soon as the q preglow indicator lamp goes out, turn the key to position 3 in the ignition lock and release it as soon as the engine is running. i You can start the engine without preglow when the engine is warm.
nf_BA.book Page 187 Friday, January 25, 2008 3:53 PM Controls in detail Driving and parking i On vehicles with a reverse warning feature*, an audible warning sounds for other road users when reverse gear is engaged ( page 271). i Depending on the vehicle's settings, the vehicle automatically locks itself centrally after it has driven off, at the latest ( page 106). The locking knobs on the front doors and the sliding door drop down. You can open the doors from the inside at any time.
nf_BA.book Page 188 Friday, January 25, 2008 3:53 PM Controls in detail Driving and parking Braking Warning G There is no power assistance for the service brake when the engine is not running. 3 You will need to use significantly more force to brake and could therefore lose control of the vehicle and cause an accident. Never switch off the engine while driving. 188 Do not accelerate to prevent your vehicle from rolling backwards on an uphill gradient.
nf_BA.book Page 189 Friday, January 25, 2008 3:53 PM Controls in detail Driving and parking Apply the brakes so that you can feel their response after a journey on wet roads, especially if the road has been salted. The brake discs will be warmed, dry more quickly and be protected against corrosion. If you make only moderate use of the service brake, check from time to time that it is fully functional. To do this, brake more sharply at a higher vehicle speed. The brake will grip better as a result.
nf_BA.book Page 190 Friday, January 25, 2008 3:53 PM Controls in detail Driving and parking Warning G Always switch off the engine and apply the handbrake before leaving the vehicle. The vehicle could roll away if it is not secured.
nf_BA.book Page 191 Friday, January 25, 2008 3:53 PM Controls in detail Driving and parking Warning G Regulations in some countries require the parking lamps to be switched on to illuminate the vehicle for other road users if parked on a public road at night. In builtup areas, night reflectors can also be used. The handbrake is located between the driver’s seat and the passenger’s seat. Handbrake Warning G Never leave children unsupervised in the vehicle. They could release the handbrake.
nf_BA.book Page 192 Friday, January 25, 2008 3:53 PM Controls in detail Driving and parking Applying the handbrake Pull lever 1 up as far as the last detent. The 7 indicator lamp in the instrument cluster lights up while the engine is running. 3 i On vehicles with a folding handbrake lever, you can then press lever 1 down to the stop. 192 Releasing the handbrake i On vehicles with a folding handbrake lever, you must first pull lever 1 up to the stop.
nf_BA.book Page 193 Friday, January 25, 2008 3:53 PM Controls in detail Driving and parking Warning G The wheels on the rear axle could lock if the handbrake lever is applied too abruptly. The vehicle could then start to skid. Make sure that you apply the handbrake lever carefully to ensure that braking application is moderated. Stopping the engine Apply handbrake ( page 191). !CAUTION Move selector lever to P. If the coolant temperature is raised, e.g.
nf_BA.book Page 194 Friday, January 25, 2008 3:53 PM Controls in detail Driving and parking Steering General driving tips Drinking and driving Warning 3 Warning G Drinking and driving and/or taking drugs and driving are very dangerous combinations. Even a small amount of alcohol or drugs can affect your reflexes, perceptions and judgment. The possibility of a serious or even fatal accident is sharply increased when you drink or take drugs and drive.
nf_BA.book Page 195 Friday, January 25, 2008 3:53 PM Controls in detail Driving and parking Driving in wet conditions Warning G The vehicle may hydroplane despite having adequate tire tread depth and being driven at low speeds, depending on the depth of water on the road surface. For this reason, avoid tire ruts and brake carefully.
nf_BA.book Page 196 Friday, January 25, 2008 3:53 PM Controls in detail Driving and parking 3 causes and consequences of tire wear measures to be taken in the event of tire damage tire types for certain regions, areas of operation or conditions of vehicle use interchangeability of tires, etc. Modifications to the brake system or wheels are not permissible, nor is the use of spacer plates or brake dust shields. Any such modifications will invalidate the vehicle’s general operating permit.
nf_BA.book Page 197 Friday, January 25, 2008 3:53 PM Controls in detail Driving and parking Warning G Although the applicable federal motor vehicle safety laws consider a tire to be worn when the Treadwear Indicators (TWI) become visible at approximately 1/ 16 in (1.6 mm), do not allow your tires to wear down to that level. As tread depth approaches 1/8 in (3 mm) for summer tires or 1/6 in (4 mm) for winter tires, the adhesion properties on a wet road are sharply reduced.
nf_BA.book Page 198 Friday, January 25, 2008 3:53 PM Controls in detail Driving and parking Tire traction Tire grip is greatly reduced on a wet, snow covered or icy road. Speed and driving style must therefore be adapted to suit road conditions. The safe speed on a wet, snow covered or icy road is always lower than on a dry road. 3 Below a tread depth of 1/8 in (3 mm), tire grip begins to decrease rapidly on wet roads.
nf_BA.book Page 199 Friday, January 25, 2008 3:53 PM Controls in detail Driving and parking Tire speed rating Regardless of the tire speed rating, local speed limits should be obeyed. Use prudent driving speeds appropriate to prevailing conditions. Warning G Even when permitted by law, never operate a vehicle at speeds greater than the maximum speed rating of the tires.
nf_BA.book Page 200 Friday, January 25, 2008 3:53 PM Controls in detail Driving and parking Improper alignment will not cause vehicle vibration. Vibration may be the result of a tire and wheel imbalance. Proper balancing will reduce vibration and avoid tire cupping and spotty wear. Coolant temperature During severe operating conditions and stop-and-go city traffic, the coolant temperature may rise close to approximately 250 °F (120 °C).
nf_BA.book Page 201 Friday, January 25, 2008 3:53 PM Controls in detail Automatic transmission Automatic transmission Gearshift pattern Gearshift procedure The automatic transmission adapts to your individual driving style by continuously adjusting its shift points. These shift point adjustments take into account the current operating and driving conditions. If the operating or driving conditions change, the automatic transmission reacts by adjusting the gearshift program.
nf_BA.book Page 202 Friday, January 25, 2008 3:53 PM Controls in detail Automatic transmission The selector lever position engaged or the current shift range is shown in the display. Display on vehicles with steering wheel buttons* ( page 151) and on vehicles without steering wheel buttons ( page 147). Selector lever positions ì Parking lock Prevents the parked vehicle from rolling away. Only move the selector lever to P when the vehicle is stationary.
nf_BA.book Page 203 Friday, January 25, 2008 3:53 PM Controls in detail Automatic transmission If ASR is deactivated or ESP® has malfunctioned: only move the selector lever to N if the vehicle is in danger of skidding, e.g. on icy roads. ê Drive The automatic transmission changes gear automatically. All 5 forward gears are available. One-touch gearshifting When the selector lever is in position D, you can perform gearshifts yourself, even on vehicles with automatic transmission.
nf_BA.book Page 204 Friday, January 25, 2008 3:53 PM Controls in detail Automatic transmission 3 Upshifting Selecting the ideal shift range Press the selector lever to the right towards D+. Press and hold the selector lever towards D–. The automatic transmission extends the shift range by one gear. The automatic transmission shifts to the next gear up, depending on the current gearshift program. The automatic transmission will shift to a range which allows easy acceleration and deceleration.
nf_BA.book Page 205 Friday, January 25, 2008 3:53 PM Controls in detail Automatic transmission ê The transmission shifts through all 5 gears. é The automatic transmission shifts only as far as fourth gear. è The automatic transmission shifts only as far as third gear. This position allows you to use the braking effect of the engine. ç The automatic transmission shifts only as far as second gear.
nf_BA.book Page 206 Friday, January 25, 2008 3:53 PM Controls in detail Automatic transmission Kickdown Use kickdown for maximum acceleration. Depress the accelerator pedal beyond the pressure point. The automatic transmission shifts to the next gear down, depending on the engine speed. 3 Release the accelerator pedal as soon as the desired speed has been reached. The automatic transmission shifts up again.
nf_BA.book Page 207 Friday, January 25, 2008 3:53 PM Controls in detail Automatic transmission Trailer towing Run the engine in the moderate engine speed range on steep uphill gradients. Depending on the uphill or downhill gradient, shift down to shift range 3 or 2 ( page 204), even if cruise control* is switched on. Working on the vehicle Warning G Apply the handbrake before working on the vehicle and shift the automatic transmission into parking position P. The vehicle could otherwise roll away.
nf_BA.book Page 208 Friday, January 25, 2008 3:53 PM Controls in detail Good visibility Good visibility Mirrors Before starting off, adjust the rear-view mirror and the exterior mirrors in such a way that you can get a good overview of road and traffic conditions. Setting the rear-view mirror to antidazzle mode Warning G The exterior mirrors reduce the size of the image. Objects therefore appear further away than they really are.
nf_BA.book Page 209 Friday, January 25, 2008 3:53 PM Controls in detail Good visibility Press left-hand side 1 of the switch for the left-hand mirror or press right-hand side 2 of the switch for the right-hand mirror. Adjusting the exterior mirrors electrically* The switch and button for adjusting the exterior mirrors are located in the interior trim of the driver’s door. Press button 3 at the top or bottom, right or left until you have adjusted the mirror to the correct position.
nf_BA.book Page 210 Friday, January 25, 2008 3:53 PM Controls in detail Good visibility Windshield wipers The combination switch is located on the left of the steering wheel. Switching on the windshield wipers Turn key to position 1 in the ignition lock ( page 111). !CAUTION N54.
nf_BA.book Page 211 Friday, January 25, 2008 3:53 PM Controls in detail Good visibility For example, if you have selected speed II and stop the vehicle,the wipers wipe at intermittent speed until you pull away again. The wipe intervals are longer in intermittent mode. Vehicles with rain sensor*: You can use speed I as the universal speed. The rain sensor adjusts the wiping frequency according to how heavy the rain is. If you stop the vehicle, speeds III and II are automatically switched down to speed I.
nf_BA.book Page 212 Friday, January 25, 2008 3:53 PM Controls in detail Good visibility Intermittent wipe Only switch on intermittent wipe in damp weather conditions or when it is raining. 3 Rear window wiper* The switch is in the combination switch on the left of the steering wheel. i The rear window wiper switches on automatically if you engage reverse gear and the windshield wipers are on. Vehicles with rain sensor*: The a rain sensor is activated when you switch on intermittent wipe.
nf_BA.book Page 213 Friday, January 25, 2008 3:53 PM Controls in detail Good visibility Wiping with washer fluid Turn switch 1 to 5 or 2 and keep it pressed until the window is clean. Windshield heating* The windshield heating is operational while the engine is running. The windshield heating consumes a lot of energy. You should therefore switch the heating off as soon as the windshield is clear. The heating switches off automatically after approximately 5 minutes.
nf_BA.book Page 214 Friday, January 25, 2008 3:53 PM Controls in detail Good visibility To switch on: press upper part of the P switch. The indicator lamp in the switch comes on. To switch off: press upper part of the P switch again. the window is clear. The heating switches off automatically after a maximum of 12 minutes. The switch for the rear window heating is on the center console. 3 The indicator lamp in the switch goes N54.
nf_BA.book Page 215 Friday, January 25, 2008 3:53 PM Controls in detail Air conditioning Air conditioning 3 N83.
nf_BA.
nf_BA.book Page 217 Friday, January 25, 2008 3:53 PM Controls in detail Air conditioning The interval for replacing the filter depends on environmental factors, e.g. high air pollution. The interval may be shorter than that indicated in the Service Booklet. i Condensation may collect under the vehicle while Tempmatic is in operation. Warning G Air flowing out of the air vents in the footwell when Tempmatic is in operation may be very hot or very cold.
nf_BA.book Page 218 Friday, January 25, 2008 3:53 PM Controls in detail Air conditioning Function N83.25-2048-31 3 Control panel for the air-conditioning system 218 Page Switching the air conditioning system on or off 1 Temperature selector control 220 2 Airflow control with indicator 220 3 Switch for air-recirculation mode 221 i 4 Switch for reheat function (dehumidification) 223 Only use this setting for a brief period. The windows could otherwise fog up.
nf_BA.book Page 219 Friday, January 25, 2008 3:53 PM Controls in detail Air conditioning To switch off: press the ° switch for normal mode. The indicator lamp in the switch goes out. Basic setting Heating Ventilation/cooling Set temperature selector control 1 ( page 218) as required, but do not turn the control below the middle position. This setting rapidly ventilates/cools the vehicle interior.
nf_BA.book Page 220 Friday, January 25, 2008 3:53 PM Controls in detail Air conditioning Open as required: the center air vents the side air vents the ventilation vents Switch air-conditioning system on ( page 218) if necessary. 3 Setting the temperature The temperature is set using temperature selector control 1 in the control panel ( page 218).
nf_BA.book Page 221 Friday, January 25, 2008 3:53 PM Controls in detail Air conditioning The display next to the airflow controls indicates the speed of the airflow. i The blower switches off if you press the ß airflow control again after the slowest speed has been reached. Setting air distribution The air distribution is set using the air distribution control in the control panel ( page 218).
nf_BA.book Page 222 Friday, January 25, 2008 3:53 PM Controls in detail Air conditioning The switch for air-recirculation mode is in the control panel ( page 218). To switch on: press the Ä switch. The indicator lamp in the switch comes on. 3 To switch off: press the Ä switch again. The indicator lamp in the switch goes out. i Air-recirculation mode is automatically switched off after about 10 to 30 minutes, depending on the outside temperature.
nf_BA.book Page 223 Friday, January 25, 2008 3:53 PM Controls in detail Air conditioning i Residual heat switches off automatically: after about 30 minutes when you switch on the ignition if the battery’s voltage drops Reheat function (dehumidification) The reheat function quickly ensures defrosted windows and dehumidification in the vehicle interior. To switch on: press the Å switch ( page 218). The indicator lamp in the switch comes on. To switch on: press the Å switch ( page 218).
nf_BA.book Page 224 Friday, January 25, 2008 3:53 PM Controls in detail Air conditioning Turn air distribution control 5 to ‚ P. Set temperature selector control 1 to P. Close the center air vents and the air outlets for the head area and the rear compartment. Turn airflow control 2 to fourth speed. Open the side air vents and direct them at the side windows. 3 If the windshield is fogged up on the outside, switch on the windshield wipers ( page 210).
nf_BA.book Page 225 Friday, January 25, 2008 3:53 PM Controls in detail Air conditioning Ventilated glove box* The glove box can be ventilated when Tempmatic is switched on, e.g. to cool its contents. To switch off: press switch 1 to the right. Air conditioning in the rear* Control panel for the air conditioning in the rear 1 Air conditioning in the rear 2 Airflow control 3 Temperature selector control To switch on: press the switch. N83.60-2009-31 The indicator lamp in the switch comes on.
nf_BA.book Page 226 Friday, January 25, 2008 3:53 PM Controls in detail Air conditioning Setting the airflow Setting the temperature Air vents in the roof air duct The airflow is set using the airflow control for the rear compartment. Only change the temperature in small increments. Adjustable air vents are integrated in the roof air duct. To increase: press the Q airflow control. 3 To reduce: press the control.
nf_BA.book Page 227 Friday, January 25, 2008 3:53 PM Controls in detail Air conditioning Alter the air distribution by turning the air vents. !CAUTION Never close all the air vents, otherwise there is a risk of damage to the air-conditioning system in the rear compartment. Heater* The heater is operational when the engine is running. Depending on the temperature selected and the outside temperature, it heats or ventilates. The interval for replacing the filter depends on environmental factors, e.g.
nf_BA.book Page 228 Friday, January 25, 2008 3:53 PM Controls in detail Air conditioning i Function If the vehicle interior has been heated up, ventilate the vehicle before driving off. Keep the air inlet on the hood free of ice and snow. 3 1 Temperature selector control ( page 230) 2 Airflow control with indicator ( page 230) 3 Position the sliders for the center air vents in the central position to provide practically draft-free ventilation.
nf_BA.book Page 229 Friday, January 25, 2008 3:53 PM Controls in detail Air conditioning Basic setting Heating Ventilation Set temperature selector control 1 ( page 228) as required, but do not turn the control below the middle position. This setting rapidly ventilates the vehicle interior. Set airflow control 2 ( page 228) as required, but do not turn the control below the second speed. Set the air distribution control as shown. Air distribution control Close the center air vents.
nf_BA.book Page 230 Friday, January 25, 2008 3:53 PM Controls in detail Air conditioning Setting the temperature The temperature is set using temperature selector control 1 in the control panel ( page 228). Only change the temperature in small increments. 3 i If you use the basic settings for heating or ventilating the vehicle, you will rarely need to adjust the temperature, airflow and air distribution ( page 229). To increase: turn the temperature selector control clockwise.
nf_BA.book Page 231 Friday, January 25, 2008 3:53 PM Controls in detail Air conditioning Air-recirculation mode You can switch off the flow of outside air if unpleasant odors are entering the vehicle from outside, e.g. before driving through a tunnel. No more outside air is taken in and the air inside the vehicle is recirculated. Warning G Only switch over to air-recirculation mode briefly if outside temperatures are low. The windows could otherwise fog up.
nf_BA.book Page 232 Friday, January 25, 2008 3:53 PM Controls in detail Air conditioning Turn air distribution control 4 ( page 228) to Ô P. Close the center air vents and the air outlets for the head area and the rear compartment. Open the side air vents and direct them at the side windows. 3 If the windshield is fogged up on the outside, switch on the windshield wipers ( page 210). Defrosting The following settings can be used to clear the windshield and the side windows, e.g.
nf_BA.book Page 233 Friday, January 25, 2008 3:53 PM Controls in detail Air conditioning Rear heater* To switch on: press the switch. The indicator lamp in the switch comes on. To switch off: press the switch again. The indicator lamp in the switch goes out. Setting the temperature Only change the temperature in small increments. i Your vehicle may be equipped with an air-conditioning system in the rear compartment ( page 225) and/or a rear heater*.
nf_BA.book Page 234 Friday, January 25, 2008 3:53 PM Controls in detail Air conditioning To increase: turn the temperature selector control clockwise. To reduce: turn the temperature selector control counterclockwise. The switch for the heater booster function is between the light switch and the steering wheel. N54.25-2927-31 Heater booster function* The fuel-fired heater booster system N54.25-2926-31 3 heats the vehicle interior as quickly as possible while the engine is running.
nf_BA.book Page 235 Friday, January 25, 2008 3:53 PM Controls in detail Air conditioning To switch on: press the switch ³. To switch off: press the ³ switch again. The indicator lamp in the switch comes on. The indicator lamp in the switch goes out. i The heater booster function operates for around a further 2 minutes and then switches off automatically.
nf_BA.book Page 236 Friday, January 25, 2008 3:53 PM Controls in detail Auxiliary heating/ventilation* Auxiliary heating/ventilation* The auxiliary heating heats or ventilates the interior to a temperature that you have set. The auxiliary heating can be operated with the engine switched on or off. The auxiliary heating is equipped with a 3 water heater. Warning G Exhaust fumes are produced while the auxiliary heating is in operation.
nf_BA.book Page 237 Friday, January 25, 2008 3:53 PM Controls in detail Auxiliary heating/ventilation* The auxiliary heating heats the coolant and the vehicle interior and is therefore more favorable to the engine and consumes less fuel. The fuel tank must be at least a quarter full to ensure that the auxiliary heating/ventilation operates correctly. The maximum heating period is 60 minutes.
nf_BA.book Page 238 Friday, January 25, 2008 3:53 PM Controls in detail Auxiliary heating/ventilation* To switch the auxiliary heating on: press and hold the ö switch for more than 2 seconds: Before switching on Adjust the heat output to the desired temperature using the temperature control selector ( page 218). Set the air distribution as required. N54.25-2928-31 The blower switches to the first speed.
nf_BA.book Page 239 Friday, January 25, 2008 3:53 PM Controls in detail Auxiliary heating/ventilation* i You cannot use the auxiliary ventilation to cool the vehicle interior to a lower temperature than the outside temperature. The auxiliary heating operates for around a further 2 minutes and then switches off automatically. Operation using the remote control* Turn the key to position 0 in the ignition lock ( page 111). The remote control has a maximum range of approximately 600 meters.
nf_BA.book Page 240 Friday, January 25, 2008 3:53 PM Controls in detail Auxiliary heating/ventilation* To switch the auxiliary heating on: press button 2. Indicator lamp 1 lights up briefly. To switch the auxiliary heating off: press button 3. Indicator lamp 1 lights up briefly. 3 The auxiliary heating operates for around a further 2 minutes and then switches off automatically.
nf_BA.book Page 241 Friday, January 25, 2008 3:53 PM Controls in detail Auxiliary heating/ventilation* Operating system without steering wheel buttons Switch on the ignition ( page 111). Press the ö switch. The ö symbol in the display flashes. or Press the menu button on the instrument cluster repeatedly until the ö symbol in the display flashes. Use the or button on the instrument cluster to select desired switch-on time 1 to 3. The switch-on time selected is displayed.
nf_BA.book Page 242 Friday, January 25, 2008 3:53 PM Controls in detail Auxiliary heating/ventilation* 3 i i You can reach the Aux. heat. submenu via the Settings menu ( page 161). If you turn the key to position 0 in the ignition lock, the yellow indicator lamp in the ö switch goes out after 30 minutes. Press the æ or ç button to select the desired switch-on time. The automatic switch-on is deactivated if the Timer off setting is selected. Press the è button. The switch-on time is selected.
nf_BA.book Page 243 Friday, January 25, 2008 3:53 PM Controls in detail Auxiliary heating/ventilation* i If you keep the button pressed, the values will change continuously. To return to the standard display: press and hold the button on the instrument cluster for more than 1 second do not press a button for 10 seconds Operating system with steering wheel buttons Press the j button. The Hours menu appears in the display. Set the hours using the æ or ç button. Press the j button.
nf_BA.book Page 244 Friday, January 25, 2008 3:53 PM Controls in detail Open air Open air Switch on the ignition ( page 111). Side windows You can open and close the side windows electrically. The switches for all side windows are located on the door control panel. 3 Warning i G Make sure that nobody can become trapped as you close a side window. Remove the key from the ignition lock even if you are only leaving the vehicle for a short time. Never leave children unsupervised in the vehicle.
nf_BA.book Page 245 Friday, January 25, 2008 3:53 PM Controls in detail Open air Resetting the side windows The side windows must be reset if the battery has been disconnected: Pull the two power window switches until the side windows are closed. Hold the switches in this position for about 1 second. The side windows are reset. Sliding sunroof* Warning Warning (Continued) G Make sure that nobody can become trapped as you close the sliding sunroof.
nf_BA.book Page 246 Friday, January 25, 2008 3:53 PM Controls in detail Open air !CAUTION i Do not raise the sliding sunroof if you have mounted a roof rack. It would otherwise strike the roof rack. You could thereby damage the sliding sunroof and the roof rack. The sliding sunroof opens automatically when you press the sliding sunroof switch for opening beyond the pressure point and then release it. To stop the sliding sunroof, press the sliding sunroof switch again in any direction.
nf_BA.book Page 247 Friday, January 25, 2008 3:53 PM Controls in detail Open air Resetting the sliding sunroof The sliding sunroof must be reset after: the sunroof has been closed manually using the emergency operation key ( page 522) the sunroof has opened with a jerk a malfunction Roof ventilator in the load compartment* The roof ventilator can be used to ventilate or remove air from the load compartment. The switch is between the light switch and the steering wheel.
nf_BA.
nf_BA.book Page 249 Friday, January 25, 2008 3:53 PM Controls in detail Driving systems Warning G The cruise control function cannot take account of road and traffic conditions. Always pay attention to road and traffic conditions, even when cruise control is activated. Warning G Do not use cruise control: if road and traffic conditions do not permit a constant driving speed to be maintained (e.g. heavy traffic or winding roads). You could otherwise cause an accident.
nf_BA.book Page 250 Friday, January 25, 2008 3:53 PM Controls in detail Driving systems Storing the current speed Accelerate/decelerate the vehicle to the desired speed. N54.25-2925-31 Move the cruise control lever briefly upward 1 or downward 3. Release the accelerator pedal. Cruise control is activated. 3 1 To store the current or a higher speed 2 To resume the last speed stored 3 To store the current speed or a lower speed 4 To deactivate cruise control 250 The current speed is stored.
nf_BA.book Page 251 Friday, January 25, 2008 3:53 PM Controls in detail Driving systems Resuming the stored speed Warning G Only resume the stored speed if you know what this speed is and the current situation is appropriate to do so. Otherwise, sudden acceleration or braking could endanger you or others. Pull the cruise control lever briefly in the direction of arrow 2. Release the accelerator pedal. Cruise control is activated and adjusts the vehicle’s speed to the last speed stored.
nf_BA.book Page 252 Friday, January 25, 2008 3:53 PM Controls in detail Driving systems Briefly press the cruise control lever upward 1 to increase the speed or downward 3 to reduce the speed. The last speed stored is increased or decreased in 1 mph increments (1 km/h increments). 3 or Press and hold the cruise control lever up 1 or down 3 until the desired speed has been reached. Release the cruise control lever. The current speed is stored.
nf_BA.
nf_BA.book Page 254 Friday, January 25, 2008 3:53 PM Controls in detail Driving systems Parktronic is an electronic parking aid and informs you visually and audibly of the distance between the vehicle and an obstacle. 3 Parktronic is automatically switched on when you switch on the ignition and release the handbrake. You must also move the selector lever to position D, N or R. Parktronic switches off at speeds of over 11 mph (18 km/h).
nf_BA.
nf_BA.book Page 256 Friday, January 25, 2008 3:53 PM Controls in detail Driving systems Warning displays The warning displays indicate the distance between the sensor and the obstacle. The warning display for the front area is located on the middle of the dashboard above the center console. N54.65-2074-31 N54.
nf_BA.book Page 257 Friday, January 25, 2008 3:53 PM Controls in detail Driving systems !CAUTION There is a malfunction if only the red segments of the warning display light up ( page 451). The selector lever position determines whether the front and/or rear area is monitored. Transmission position Monitoring D Front area R or N Front and rear area P No areas activated One or more segments light up as the vehicle approaches an obstacle, depending on the vehicle’s distance from the obstacle.
nf_BA.book Page 258 Friday, January 25, 2008 3:53 PM Controls in detail Driving systems Switching Parktronic on/off You can switch Parktronic on and off manually. The switch is located on the center console. To switch off: press upper part 1 of the switch. The indicator lamp in the switch comes on. To switch on: press upper part 1 of the switch again. The indicator lamp in the switch goes out. 3 N54.
nf_BA.book Page 259 Friday, January 25, 2008 3:53 PM Controls in detail Driving systems G Warning The rear view camera is only an aid and may display potential obstacles in a skewed perspective, incorrectly or not at all. This system does not relieve you of your obligation to pay attention. 1 Rear view camera monitor The angle and inclination of the monitor can be adjusted from inside the storage compartment on the center console.
nf_BA.book Page 260 Friday, January 25, 2008 3:53 PM Controls in detail Driving systems Warning (Continued) 3 G Failure to pay attention could mean that you fail to notice persons or objects and, by continuing to drive, cause injury to persons or damage to objects and your vehicle. The manufacturer recommends that you also use the Parktronic system* when parking your vehicle.
nf_BA.book Page 261 Friday, January 25, 2008 3:53 PM Controls in detail Driving systems For information on cleaning the camera, see “Rear view camera lens” ( page 422). Switching the monitor on You can switch the monitor on by: Engaging reverse gear. This activates the rear view camera which switches the monitor on. Activating the rear view camera Make sure that the ignition is switched on. iIf you switched the monitor off using Engage reverse gear. The rear view camera is activated.
nf_BA.book Page 262 Friday, January 25, 2008 3:53 PM Controls in detail Driving systems Input for auxiliary devices (AUX) 3 If reverse gear is engaged while auxiliary devices are in operation, the monitor will switch over to the rear view camera. When reverse gear is disengaged, the monitor will continue to show the rear view camera screen for approx. 15 seconds before switching back to the input for auxiliary devices (AUX).
nf_BA.book Page 263 Friday, January 25, 2008 3:53 PM Controls in detail Driving systems Menu guidance Press the % or $ button until the menu you desire is highlighted. Selecting the main menu Press the m button. Press the m button. The main menu selection options (menu level 1) appear. Go to previous menu The required menu is selected.
nf_BA.book Page 264 Friday, January 25, 2008 3:53 PM Controls in detail Driving systems 3 Display menu Screen illumination submenu You can customize the monitor display in the Display menu. You can configure the monitor’s backlighting in the Screen illum. submenu. You can select the following submenus: Screen illumination Brightness Contrast Color Tint Back Press the m button. The main menu (menu level 1) is displayed ( page 263).
nf_BA.book Page 265 Friday, January 25, 2008 3:53 PM Controls in detail Driving systems Press the % or $ button. The backlighting is set in steps. Press the m button. The submenus (menu level 2) are displayed. i If 7 seconds pass without any buttons being pressed, the menu will be exited automatically. Brightness submenu You can set the monitor’s brightness in the Brightness submenu. Press the m button. The main menu (menu level 1) is displayed ( page 263).
nf_BA.book Page 266 Friday, January 25, 2008 3:53 PM Controls in detail Driving systems Contrast submenu You can set the monitor’s screen contrast in the Contrast submenu. Press the m button. The main menu (menu level 1) is displayed ( page 263). 3 Press the % or $ button until the Display menu is highlighted. The Display menu is selected. Press the m button. The submenus (menu level 2) are displayed. Press the % or $ button until the Contrast submenu is highlighted. Press the m button.
nf_BA.book Page 267 Friday, January 25, 2008 3:53 PM Controls in detail Driving systems Press the m button. The color setting is displayed. Press the % or $ button. The color is set in steps. Press the m button. The submenus (menu level 2) are displayed. Tint submenu (NTSC color balance) You can set the monitor’s color balance in accordance with the NTSC standard in the TINT submenu. Press the m button. The main menu (menu level 1) is displayed ( page 263).
nf_BA.book Page 268 Friday, January 25, 2008 3:53 PM Controls in detail Driving systems Aspect ratio menu i You can set the monitor’s display format in the Aspect ratio menu. The active display format is identified by the symbol. Press the m button. The 16:9 format is full-screen format. The rear view camera is set to display in 16:9 format. The 4:3 format usually needs to be selected for standard video signals. 3 Press the % or $ button until the Aspect ratio menu is highlighted.
nf_BA.book Page 269 Friday, January 25, 2008 3:53 PM Controls in detail Driving systems Norm menu i You can set the monitor’s video standard in the Norm menu. The active video standard is identified by the symbol. Press the m button. Press the m button. The required video standard is activated. i The main menu (menu level 1) is displayed ( page 263). The rear view camera’s video signals conform to the NTSC standard. PAL should usually be selected for standard video signals.
nf_BA.book Page 270 Friday, January 25, 2008 3:53 PM Controls in detail Driving systems Menu language menu 3 iThe active language is identified by the symbol. You can select the language for the monitor’s menu texts in the Menu language menu. Press the % or $ button until the desired language is highlighted. Press the m button. Press the m button. The main menu (menu level 1) is displayed ( page 263). Press the % or $ button until the Menu language menu is highlighted. Press the m button.
nf_BA.book Page 271 Friday, January 25, 2008 3:53 PM Controls in detail Driving systems Monitor shutdown while driving For safety reasons, the monitor will shut off at speeds above 6 mph (10 km/h). The following message will be displayed for 7 seconds prior to the monitor shutting off. Press the % or $ button until the desired setting is highlighted. Yes: overwrite all settings with the default values. : go back to the main menu without applying the default values.
nf_BA.book Page 272 Friday, January 25, 2008 3:53 PM Controls in detail Driving systems Warning 3 G The reverse warning feature signal could be ignored by other road users. For this reason, the reverse warning feature cannot guarantee that there are no people or objects behind your vehicle. The reverse warning feature is a system which helps you ensure the safety of other road users.
nf_BA.book Page 273 Friday, January 25, 2008 3:53 PM Controls in detail Operating the vehicle Operating the vehicle Operating speed governor (ADR)* When activated, the operating speed governor (ADR) automatically increases the engine speed to a preset or adjustable operating speed ( page 275). i Activating/deactivating ADR The idle speed of the engine automatically increases after a cold start.
nf_BA.book Page 274 Friday, January 25, 2008 3:53 PM Controls in detail Operating the vehicle To switch on: press upper part 1 of the switch with the engine running. The indicator lamp in the switch comes on. 3 Vehicles without steering wheel buttons: The ™ indicator lamp in the instrument cluster comes on. 274 Vehicles with steering wheel buttons: The Operating speed governor active message appears in the display. To switch off: press lower part 2 of the switch with the engine running.
nf_BA.book Page 275 Friday, January 25, 2008 3:53 PM Controls in detail Operating the vehicle Adjustable operating speed* Adjusting the operating speed Switch on ADR ( page 273). i To increase: press upper part 1 of the switch. The idle speed of the engine automatically increases after a cold start. You can only reduce the operating speed to the current idle speed. or N54.25-2933-31 On vehicles with cruise control*, press the cruise control lever* up ( page 249).
nf_BA.book Page 276 Friday, January 25, 2008 3:53 PM Controls in detail Transporting Transporting Loading guidelines Warning 3 G Secure and position a load as described in the loading guidelines. Otherwise, the load could slide or be thrown around in the event of strong braking maneuvers, sudden changes of direction or poor road conditions, thereby injuring you or others. The same applies to dismantled seats if left inside the vehicle.
nf_BA.book Page 277 Friday, January 25, 2008 3:53 PM Controls in detail Transporting Warning G After an accident, have a damaged load compartment floor or damaged load surface, the lashing eyes and lashing materials inspected by a specialist workshop having the necessary technical expertise and tools to carry out the required work. The manufacturer recommends that you use an authorized Sprinter Dealer for this purpose.
nf_BA.book Page 278 Friday, January 25, 2008 3:53 PM Controls in detail Transporting During loading Observe the maximum permissible axle loads and permissible gross weight for the vehicle. 3 !CAUTION In passenger vans with the maximum number of seats, the maximum payload would cause the permissible rear axle load to be exceeded. i Bear in mind that your vehicle's unladen weight is increased by the installation of optional equipment and accessories.
nf_BA.book Page 279 Friday, January 25, 2008 3:53 PM Controls in detail Transporting Load distribution The load's overall center of gravity should be as low and central as possible, between the axles near the rear axle. !CAUTION Excessive loads on individual points of the load compartment floor or load surface have a negative effect on handling characteristics and could damage the floor covering. For crewbus models: i Always transport loads in the load compartment.
nf_BA.book Page 280 Friday, January 25, 2008 3:53 PM Controls in detail Transporting Securing a load 3 As the driver of the vehicle, you are responsible for ensuring that the load is secured against slipping, tipping over, rolling or falling down, whether driving in normal traffic situations or on poor road surfaces or as a result of having to swerve to avoid an obstacle or applying the brakes fully.
nf_BA.book Page 281 Friday, January 25, 2008 3:53 PM Controls in detail Transporting Always use the lashing points closest to the load for securing it in place and place padding around sharp edges. i Lashing materials that comply with valid standards can be obtained in any specialist shop or from an authorized Sprinter Dealer. 3 If possible, use the lashing eyes when securing a load, especially if it is heavy.
nf_BA.book Page 282 Friday, January 25, 2008 3:53 PM Controls in detail Transporting Warning 3 G Do not carry out any modifications or repairs to the lashing points, the lashing eyes or the lashing materials. The load or the lashing points could accidentally come loose and cause serious injury to you or others as well as damage to property. Distribute loads evenly between the lashing points or lashing eyes. Observe the loading guidelines.
nf_BA.book Page 283 Friday, January 25, 2008 3:53 PM Controls in detail Transporting Warning G If you tension the lashing straps between the side walls or between a side wall and the load compartment floor, the permissible load for the lashing rails, lashing points or lashing eyes could be exceeded in the event of strong braking, sudden changes of direction or an accident. The load would no longer be secured, which could result in serious injuries caused by the load slipping.
nf_BA.book Page 284 Friday, January 25, 2008 3:53 PM Controls in detail Transporting Mounting lashing points for load rails* 3 1 Locking mechanism To install: slide the lashing eye through a recess in the load rail close to the load until locking mechanism 1 in the recess engages. 284 i When you pull locking mechanism 1 out of the recess, the lashing eye is able to move within the lashing rail or load rail. Make sure that locking mechanism 1 is always engaged in a recess.
nf_BA.book Page 285 Friday, January 25, 2008 3:53 PM Controls in detail Transporting Check whether the lashing eye is firmly in place. Warning To remove: pull locking mechanism 1 upward and pull the lashing eye through a recess towards the locking mechanism and out of the load rail. Handling and braking characteristics may change when you have mounted carrier systems on the vehicle. You could endanger yourself and others.
nf_BA.book Page 286 Friday, January 25, 2008 3:53 PM Controls in detail Transporting Warning (Continued) G Observe the maximum roof loads ( page 630), the maximum axle load and the maximum load-bearing capacity of the roof rack. 3 !CAUTION Make sure that: the securing bolts for the roof rack are tightened to a torque of 6.0 – 7.
nf_BA.book Page 287 Friday, January 25, 2008 3:53 PM Controls in detail Features Features Interior storage compartments Warning G Only load the storage compartments in such a way that occupants cannot be injured by their contents in the event of an accident, braking or a sudden change in direction. For this reason, do not transport heavy, bulky, pointed or sharp-edged objects in the storage spaces or compartments.
nf_BA.book Page 288 Friday, January 25, 2008 3:53 PM Controls in detail Features 3 !CAUTION Storage compartments in the doors The entire storage compartment is permitted to hold a maximum load of 66 lbs (30 kg). You can use these storage compartments for the safe storage of small and light items. Do not store high, bulky loads in the storage compartment. You could otherwise damage the roof trim in the event of sudden braking.
nf_BA.book Page 289 Friday, January 25, 2008 3:53 PM Controls in detail Features To open: pull glove box handle 1 in the direction of the arrow. Storage compartments on the dashboard Warning G Do not store any items in the storage compartment above the passenger’s airbag if they protrude from the compartment. The passenger’s airbag must be able to inflate unimpeded.
nf_BA.book Page 290 Friday, January 25, 2008 3:53 PM Controls in detail Features i The cover on the storage compartment must remain closed while the vehicle is in motion. Eyeglasses compartment The eyeglasses compartment is located in the overhead control panel. Close cover 1 and engage it. 3 Covered storage compartment above the center console* 1 Cover 2 Release handle Pull release handle 2. Cover 1 swings upwards.
nf_BA.book Page 291 Friday, January 25, 2008 3:53 PM Controls in detail Features To open: press cover 1 of the eyeglasses compartment. Folding table in the backrest* The eyeglasses compartment folds out. Cup holders Warning To close: press cover 1 of the eyeglasses compartment into the overhead control panel until it engages. 1 Folding table Pull folding table 1 forward by the tab. Fold folding table down in the direction of the arrow and onto the seat cushion.
nf_BA.book Page 292 Friday, January 25, 2008 3:53 PM Controls in detail Features !CAUTION Do not use the recesses of the cup holders as an ashtray. You could otherwise damage the cup holders.
nf_BA.book Page 293 Friday, January 25, 2008 3:53 PM Controls in detail Features i Cup holders in the rear Vehicles with the non-smoking package are equipped with an additional cup holder in place of the ashtray. The cup holders in the rear are located under the seats. i Warning G Slide the cup holders back underneath the seat before leaving the vehicle. You could otherwise be injured by the protruding cup holders. You can change the diameter of the cup holder.
nf_BA.book Page 294 Friday, January 25, 2008 3:53 PM Controls in detail Features Pull out ashtray compartment 1 by recess 2. Ashtray Warning 3 G To open: fold cover 3 upwards. To remove the insert: reach into the left and right-hand sides of the recesses on the ashtray and pull the insert out to empty it. Switch off the engine and apply the handbrake before removing the ashtray to empty it. Otherwise, you could accidentally put the vehicle in gear.
nf_BA.book Page 295 Friday, January 25, 2008 3:53 PM Controls in detail Features Ashtray in the passenger compartment* The ashtrays are located on the righthand and left-hand side in the side trims. To open: open the ashtray. To remove the insert: press clip 1 down and remove the entire ashtray from the trim. Cigarette lighter The cigarette lighter is located next to the ashtray in the ashtray compartment in the center console.
nf_BA.book Page 296 Friday, January 25, 2008 3:53 PM Controls in detail Features Warning G Only hold the hot cigarette lighter by its knob. Otherwise, you may burn yourself. 3 Remove the cigarette lighter if children are traveling with you. They could injure themselves on a hot cigarette lighter or start a fire. Switch on the ignition ( page 111). Warning G Do not press the cigarette lighter in with too much force. The ashtray compartment could otherwise close and trap your finger.
nf_BA.book Page 297 Friday, January 25, 2008 3:53 PM Controls in detail Features sumption of 300 watts to the 12 V socket (25 A) at the bottom of the center console. 12 V socket The 12 V sockets for accessories are on the bottom of the center console (12 V, 25 A) on the inside of the driver's seat base (12 V, 15 A) in the corner trim next to each rear door in the passenger compartment (12 V, 15 A) in the load compartment next to the rear door on the left-hand side (12 V, 15 A)*.
nf_BA.book Page 298 Friday, January 25, 2008 3:53 PM Controls in detail Features i 3 The sockets are supplied with power even if the key is removed from the ignition lock. Please note that the battery may be discharged if you have connected an accessory, e.g. a coolbox, and the engine is switched off. Telephone* Telephones may only be used inside the vehicle if they are connected to a separate exterior antenna of a type tested and approved by the manufacturer.
nf_BA.book Page 299 Friday, January 25, 2008 3:53 PM Controls in detail Features The installation of the antenna must be approved by a qualified specialist workshop. Always have maintenance work carried out at a qualified specialist workshop, e.g. an authorized Sprinter Dealer. Warning G Only use the telephone when road, weather and traffic conditions permit you to do so. You will otherwise be too distracted. If you are not using the hands-free system, pull over to make a phone call.
nf_BA.
nf_BA.book Page 301 Friday, January 25, 2008 3:53 PM Operation Operation The first 1000 miles (1500 km)........... 302 Driving tips........... 303 Electronic equipment........... 315 Refueling........... 316 Engine compartment........... 318 Battery........... 335 Battery isolating switch*........... 338 4 Tires and wheels........... 341 Winter driving........... 404 Maintenance and servicing........... 409 Cleaning and care of the vehicle...........
nf_BA.book Page 302 Friday, January 25, 2008 3:53 PM Operation The first 1000 miles (1500 km) The first 1000 miles (1500 km) You will find detailed information about operating, maintaining and caring for your vehicle in the “Operation” section. If you treat the engine with sufficient care from the very start, it will reward you with excellent performance for a very long time afterward. 4 302 You should therefore drive at varying road and engine speeds for the first 1 000 miles (1 500 km).
nf_BA.book Page 303 Friday, January 25, 2008 3:53 PM Operation Driving tips Driving tips For information about driving in winter and with snow chains, see “Winter driving” ( page 404). Rail transport Transporting your vehicle by rail may be subject to certain restrictions or require special measures to be taken in some countries due to varying tunnel heights and loading standards. You can obtain information at any authorized Sprinter Dealer.
nf_BA.book Page 304 Friday, January 25, 2008 3:53 PM Operation Driving tips Electrical connections* The Sprinter Vehicle is available with a variety of pre-installed conditions (lines and turn signal indicator and brake module installed and/or not installed). Make sure that the correct trailer hitch receiver kit is used. For further information, please see your authorized Sprinter Dealer.
nf_BA.book Page 305 Friday, January 25, 2008 3:53 PM Operation Driving tips !CAUTION Cargo vans with a long wheelbase of 170.3 in (4325 mm) and an overall vehicle length of 289.1 in (7344 mm) have a reduced GTW and TWR. For the permissible weights and ratings, refer to the following table. i The GVWR and the front/rear GAWR of your vehicle are indicated on the certification label. !CAUTION For vehicle model type 3500, the allowable GCWR is less than the combined maximum weight of the GVWR and the GTW.
nf_BA.
nf_BA.book Page 307 Friday, January 25, 2008 3:53 PM Operation Driving tips Loading the vehicle and/or a trailer When loading the a trailer, you should observe that the GCWR of your vehicle is not exceeded. You must distribute total weight between the vehicle and the trailer such that neither the permissible GTW, nor the GVWR and front/rear GAWR , nor the TWR are exceeded. The tongue weight at the hitch ball must be added to the GVWR to prevent exceeding your Sprinter tow vehicle’s rear GAWR.
nf_BA.book Page 308 Friday, January 25, 2008 3:53 PM Operation Driving tips Attaching a trailer Please observe the maximum permitted trailer dimensions (width and length). 4 Most states and all Canadian provinces require safety chains between your tow vehicle and the trailer. The chains should be crisscrossed under the trailer tongue. They must be attached to the hitch receiver, and not to the vehicle’s bumper or axle. Be sure to leave enough slack in the chains to permit turning corners.
nf_BA.book Page 309 Friday, January 25, 2008 3:53 PM Operation Driving tips Towing a trailer There are many different laws, including speed limit restrictions, having to do with trailer towing. Make sure that your vehicle-trailer combination will be legal, not only for where you reside, but also for where you will be driving. A good source for this information can be the police or local authorities.
nf_BA.book Page 310 Friday, January 25, 2008 3:53 PM Operation Driving tips If possible, do not brake abruptly, but rather engage the brake slightly at first to permit the trailer to activate its brake. Then increase the braking force. Warning 4 G Take into consideration that when towing a trailer, the handling characteristics are different and less stable from those when operating the vehicle without a trailer. It is important to avoid sudden maneuvers.
nf_BA.book Page 311 Friday, January 25, 2008 3:53 PM Operation Driving tips Operating the vehicle outside the USA or Canada If you plan to operate your vehicle in foreign countries, please be aware that: service facilities or replacement parts may not be readily available, unleaded gasoline for vehicles with catalytic converters may not be available; the use of leaded fuels will damage the catalysts, gasoline may have a considerably lower octane rating, and improper fuel can cause engine damage.
nf_BA.book Page 312 Friday, January 25, 2008 3:53 PM Operation Driving tips Warning G Exceeding the permissible maximum speed can cause tire damage, which could lead to loss of control of the vehicle. 4 As the driver, you must find out about the maximum speed of the vehicle and the resulting permissible maximum speed of the tires (tire and tire pressure). Never exceed the speed limit for your tires under any circumstances ( page 383).
nf_BA.book Page 313 Friday, January 25, 2008 3:53 PM Operation Driving tips !CAUTION To prevent damage to the catalytic converters, only use premium unleaded gasoline in this vehicle. Any noticeable irregularities in engine operation should be repaired promptly. Otherwise, excessive unburned fuel may reach the catalytic converter, causing it to overheat and potentially start a fire.
nf_BA.book Page 314 Friday, January 25, 2008 3:53 PM Operation Driving tips Warning G As with any vehicle, do not idle, park or operate this vehicle in areas where combustible materials such as grass, hay, or leaves can come into contact with the hot exhaust system, as these materials could be ignited and cause a vehicle fire. 4 Emission control Certain systems of the engine serve to keep the toxic components of the exhaust gases within permissible limits required by law.
nf_BA.book Page 315 Friday, January 25, 2008 3:53 PM Operation Electronic equipment Electronic equipment Radio, telephone, two-way radio, fax machine and navigation system Warning G Please do not forget that your primary responsibility is to drive the vehicle safely. Only operate the electronic equipment when road and traffic conditions permit. Keep in mind that at a speed of just 30 mph (about 50 km/h), your vehicle travels 44 feet (about 14 m) per second.
nf_BA.book Page 316 Friday, January 25, 2008 3:53 PM Operation Refueling Refueling Warning 4 G Warning G Fuel is highly flammable. Fire, naked flames and smoking as well as the use of auxiliary heaters (sparks) are therefore prohibited when handling fuel. Do not allow fuel to come into contact with your skin or clothing. Your health may be damaged if: For this reason, switch off the auxiliary heating when refueling. you inhale fuel vapors The fuel filler flap is next to the driver’s door.
nf_BA.book Page 317 Friday, January 25, 2008 3:53 PM Operation Refueling Remove the key from the ignition lock. Switch off the auxiliary heating. Open the driver’s door. Open the fuel filler flap. Close all the vehicle’s doors, so that no fuel vapors can enter the vehicle. A clicking sound indicates that the fuel filler cap is fully closed. Open the driver’s door and close the fuel filler flap. You will find information about fuel in the “Technical data” section ( page 610).
nf_BA.book Page 318 Friday, January 25, 2008 3:53 PM Operation Engine compartment Engine compartment Opening Hood Warning G Do not pull the release lever while the vehicle is in motion. The hood could otherwise open, thereby impairing visibility and leading to loss of control of the vehicle. 4 For this reason, only open the hood when the vehicle is parked. !CAUTION Make sure that the windshield wipers are not folded away from the windshield.
nf_BA.book Page 319 Friday, January 25, 2008 3:53 PM Operation Engine compartment Warning N88.40-2063-31 N88.40-2062-31 G If the hood support strut is not engaged, the hood can fall shut. You could be injured. After opening the hood, you should therefore check whether the support strut is engaged. 2 Securing hook Push up securing hook lever 2. 3 Support strut Swing the hood upward until support strut 3 engages and the hood is supported.
nf_BA.book Page 320 Friday, January 25, 2008 3:53 PM Operation Engine compartment Warning G Engine parts may be hot and can rotate. There is a risk of injury if the hood is open and the engine is running. Only open the hood when the engine has stopped and cooled down. Warning G The engine has an electronic ignition system which carries a high voltage.
nf_BA.book Page 321 Friday, January 25, 2008 3:53 PM Operation Engine compartment Warning G Make sure that the hood is securely engaged before driving off. Do no continue driving if the hood can no longer engage after an accident, for example. The hood could otherwise come loose while the vehicle is in motion and endanger you and/or others. Lift the hood gently. Push back support strut 3 ( page 319).
nf_BA.book Page 322 Friday, January 25, 2008 3:53 PM Operation Engine compartment Service products Mechanical elements and the lubricants used for them must be carefully matched. For this reason, only brands tested and approved by the manufacturer should be used. Please contact your Sprinter Dealer to obtain the necessary information. No lubricant additives should be used. 4 The use of such additives could affect your warranty rights. Information is available from any authorized Sprinter Dealer.
nf_BA.book Page 323 Friday, January 25, 2008 3:53 PM Operation Engine compartment Check the engine oil level on a regular basis, for example weekly or each time you refuel. i If the oil level exceeds the maximum level several times during operation, have the malfunction rectified immediately at an authorized Sprinter Dealer. Checking the engine oil level in the display In vehicles with diesel engines, you can view the engine oil level in the display.
nf_BA.book Page 324 Friday, January 25, 2008 3:53 PM Operation Engine compartment Vehicles without steering wheel buttons Press the menu button on the instrument cluster repeatedly until you see the P symbol in the display. The --:-- display flashes during the measurement process. The following messages may be displayed: P OK Do not add oil. -1.0 qt Add the amount of oil shown ( page 328). -1.5 qts -2.0 qts HI 4 324 The engine oil level is too high. Have the oil siphoned off.
nf_BA.book Page 325 Friday, January 25, 2008 3:53 PM Operation Engine compartment Vehicles with steering wheel buttons* Press the button on the instrument cluster ( page 142). The following message is displayed for the duration of the measurement process: N Engine oil level Measuring in progress The following messages may be displayed: N Engine oil level OK Do not add oil. Engine oil Add 1.0 quart Add the amount of oil shown ( page 328). Engine oil Add 1.
nf_BA.book Page 326 Friday, January 25, 2008 3:53 PM Operation Engine compartment N Observe wait. period N Carry out another measurement after approximately 5 minutes when the engine is at normal operating temperature. Carry out another measurement after approximately 30 minutes when the engine has cooled down. 4 326 Engine oil level Not when eng. running Switch off the engine and wait for approximately 5 minutes if the engine is at normal operating temperature.
nf_BA.book Page 327 Friday, January 25, 2008 3:53 PM Operation Engine compartment Insert it into the dipstick tube as far as the stop and pull it back out. i Diesel engine Gasoline engine 1 Engine oil filler neck 2 Engine oil dipstick 1 Engine oil filler neck 2 Engine oil dipstick The difference in the quantity of oil between the upper and lower marks on the dipstick is approx.
nf_BA.book Page 328 Friday, January 25, 2008 3:53 PM Operation Engine compartment Add engine oil if necessary ( page 328). Adding engine oil N18.00-2041-31 4 3 Engine oil dipstick Check the engine oil level. The oil level is correct if the oil is between the lower min and upper max marks on the dipstick. 328 For specifications of engine oils see "Service products and capacities" ( page 604). Unscrew the cap on engine oil filler neck 1.
nf_BA.book Page 329 Friday, January 25, 2008 3:53 PM Operation Engine compartment Environmental note H When adding oil, take care not to spill any. No engine oil must be allowed to enter sewage systems, surface water, ground water or soil. You would otherwise be damaging the environment. Dispose of engine oil in an environmentally responsible manner. Comply with the manufacturer’s instructions. Coolant The expansion tank is in the engine compartment.
nf_BA.book Page 330 Friday, January 25, 2008 3:53 PM Operation Engine compartment Warning 4 G When opening the coolant expansion tank there is a risk of scalding from hot coolant spraying out. The cooling system and the coolant expansion tank are pressurized when the engine is at normal operating temperature. Wear gloves and eye protection. Only open the coolant expansion tank when the coolant temperature is less than 122 °F (50 °C).
nf_BA.book Page 331 Friday, January 25, 2008 3:53 PM Operation Engine compartment i Brake fluid The reservoir is in the engine compartment. Check the brake fluid level: regularly, e.g. weekly or when refueling only with the vehicle standing on a level surface and with the engine switched off There is usually a notice in the engine compartment to remind you when the next brake fluid change is due. N20.
nf_BA.book Page 332 Friday, January 25, 2008 3:53 PM Operation Engine compartment !CAUTION Brake fluid corrodes paintwork. If brake fluid comes into contact with the paintwork, immediately rinse with water. 4 If the brake fluid does not reach the MIN mark, the vehicle’s hydraulic system could be malfunctioning. Do not add brake fluid under any circumstances. This will not solve the problem. Do not drive any further. Have the system checked immediately at an authorized Sprinter Dealer.
nf_BA.book Page 333 Friday, January 25, 2008 3:53 PM Operation Engine compartment Warning G If the boiling point of the brake fluid is too low, vapor pockets may form in the brake system when the brakes are applied hard (e.g. when driving on long downhill stretches). This has a detrimental effect on braking efficiency, which could increase the stopping distance. This increases the risk of an accident. Have the brake fluid replaced every two years.
nf_BA.book Page 334 Friday, January 25, 2008 3:53 PM Operation Engine compartment Warning G Windshield washer concentrate is highly flammable. Fire, open flames and smoking are prohibited when you are handling windshield washer concentrate. 4 Adapt the mixing ratio to the outside temperature. Use: Summerwash to protect against smearing at temperatures above freezing. Winterwash when there is a risk of frost so that the water does not freeze onto the windshield.
nf_BA.book Page 335 Friday, January 25, 2008 3:53 PM Operation Battery Battery Your vehicle may be equipped with two batteries, depending on the equipment version: Starter battery in the battery recess in the driver’s footwell Auxiliary battery in the engine compartment* Warning A D G Risk of explosion When batteries are being charged, explosive detonating gas is emitted. Only charge batteries in well-ventilated areas.
nf_BA.book Page 336 Friday, January 25, 2008 3:53 PM Operation Battery Warning (Continued) C G Keep out of the reach of children. Children cannot appreciate the dangers involved in handling batteries and acid. 4 E Wear eye protection. When mixing water and acid, the liquid can splash in your eyes. Rinse out your eyes immediately after acid splashes with clean water, and consult a doctor immediately.
nf_BA.book Page 337 Friday, January 25, 2008 3:53 PM Operation Battery The batteries must always be sufficiently charged so that they achieve their intended service life. Have the battery charge status checked more frequently if you use the vehicle mainly for short trips or if you leave it parked up for a long period.
nf_BA.book Page 338 Friday, January 25, 2008 3:53 PM Operation Battery isolating switch* Battery isolating switch* You can disconnect the current to all your vehicle’s consumers using the battery isolating switch. This will prevent uncontrolled battery discharge caused by quiescent current consumption. Warning 4 G If the vehicle is equipped with an auxiliary battery in the engine compartment, it is necessary to disconnect both batteries when working on the vehicle electrical system.
nf_BA.book Page 339 Friday, January 25, 2008 3:53 PM Operation Battery isolating switch* !CAUTION Make sure that the key is in position 0 in the ignition lock and wait at least 20 seconds before disconnecting or connecting the battery isolating switch. You could otherwise damage electrical system components. Switching off the electrical system Take the key out of the ignition lock and wait for approximately 20 seconds.
nf_BA.book Page 340 Friday, January 25, 2008 3:53 PM Operation Battery isolating switch* Switching on the electrical system Insert the key into the ignition lock. Press connector 1 onto ground pin 2 until you feel it engage. The connector must be in full contact with ground pin 2. All consumers are reconnected to the power supply circuit.
nf_BA.book Page 341 Friday, January 25, 2008 3:53 PM Operation Tires and wheels Tires and wheels The tires on a new vehicle provide a balance of many characteristics. They should be inspected regularly for wear and correct cold tire inflation pressure. The vehicle manufacturer strongly recommends using tires equivalent to the originals in size, quality and performance when a replacement becomes necessary.
nf_BA.book Page 342 Friday, January 25, 2008 3:53 PM Operation Tires and wheels 4 !CAUTION !CAUTION Only use tires which have been tested and approved for your Sprinter vehicle by the vehicle manufacturer. Tires approved by the vehicle manufacturer are developed to provide the best possible performance in conjunction with the driving safety systems on your Sprinter vehicle such as ABS, BAS, ASR or ESP®.
nf_BA.book Page 343 Friday, January 25, 2008 3:53 PM Operation Tires and wheels Warning G Do not use a tire, wheel size or rating other than that specified for your Sprinter vehicle. Some combinations of unapproved tires and wheels may change suspension dimensions and performance characteristics, resulting in changes to steering, handling, and braking of your Sprinter vehicle. This can cause unpredictable handling and stress to steering and suspension components.
nf_BA.book Page 344 Friday, January 25, 2008 3:53 PM Operation Tires and wheels Warning G Worn, old tires can cause accidents. If the tire tread is badly worn, or if the tires have sustained damage, replace them. 4 When replacing rims, only use genuine wheel bolts approved by the vehicle manufacturer and specified for the particular rim type. Failure to do so can result in the bolts loosening and possibly an accident. Do not use retreaded/remolded tires.
nf_BA.book Page 345 Friday, January 25, 2008 3:53 PM Operation Tires and wheels For information on tire and wheel sizes with load ratings, refer to "Tire and loading information" ( page 303). Cuts and punctures in radial tires are repairable only in the tread area because of side wall flexing. Consult an authorized tire dealer for radial tire repairs.
nf_BA.book Page 346 Friday, January 25, 2008 3:53 PM Operation Tires and wheels !CAUTION 4 Vehicles not equipped with Tire Pressure Monitoring System (TPMS)*: For safety reasons, whenever you change a tire, you must also change the tire valve. The following tire valves from the company Schrader must be used on the vehicles not equipped with TPMS*: TR 600 for vehicle model type 2500 TR 418 for vehicle model type 3500 Other tire valves could be damaged by the specified tire pressures.
nf_BA.book Page 347 Friday, January 25, 2008 3:53 PM Operation Tires and wheels Tire care and maintenance Warning G Regularly check the tires for damage. Damaged tires can cause tire inflation pressure loss. As a result, you could lose control of your vehicle. Worn, old tires can cause accidents. If the tire tread is badly worn, or if the tires have sustained damage, replace them. The tire inflation pressure should be checked regularly, i.e. at least each time you refuel the vehicle.
nf_BA.book Page 348 Friday, January 25, 2008 3:53 PM Operation Tires and wheels bumps, bulges, cuts, cracks or splits in the tread or side of the tire foreign objects between the tires (on vehicles with twin tires) Replace the tire if any of the above conditions is found. 4 Also inspect the spare tire periodically for condition and inflation. Spare tires will age and become worn over time even if never used, and thus should be inspected and replaced when necessary.
nf_BA.book Page 349 Friday, January 25, 2008 3:53 PM Operation Tires and wheels Life of tire Tread depth The service life of a tire depends on varying factors including but not limited to: Driving style Tire inflation pressure Distance driven Do not allow your tires to wear down too far. Adhesion properties on wet roads are sharply reduced at tread depths under 1/8 in (3 mm) for summer tires and 1/ in (4 mm) for winter tires.
nf_BA.book Page 350 Friday, January 25, 2008 3:53 PM Operation Tires and wheels Warning 4 Although the applicable federal motor safety laws consider a tire to be worn when the Treadwear Indicators (TWI) become visible at approximately 1/16 in (1.6 mm), we recommend that you do not allow your tires to wear down to that level. As tread depth approaches 1/8 in (3 mm) for summer tires or 1/6 in (4 mm) for winter tires, the adhesion properties on a wet road are sharply reduced.
nf_BA.book Page 351 Friday, January 25, 2008 3:53 PM Operation Tires and wheels Direction of rotation An arrow on the side wall indicates the intended direction of rotation (spinning) of the tire which means the wheel must be mounted in the direction of rotation. If a tire does not have an arrow on the side wall indicating the direction of rotation, the wheel can be mounted either way. i The Tire Identification Number (TIN) must always be visible on the outboard side of the tire.
nf_BA.book Page 352 Friday, January 25, 2008 3:53 PM Operation Tires and wheels The tire and loading information placard can be found on the driver’s door B-pillar. This placard tells you important information about the number of people that can be in the vehicle and the total weight that can be carried in the vehicle.
nf_BA.book Page 353 Friday, January 25, 2008 3:53 PM Operation Tires and wheels The GVWR includes the weight of the vehicle, all occupants, fuel and cargo. The GAWR is the total allowable weight that can be carried by a single axle (front or rear). The GCWR is the total allowable weight of vehicle and trailer when weighed in combination. Never exceed the GVWR, the GAWR for either the front axle or rear axle or the GCWR.
nf_BA.book Page 354 Friday, January 25, 2008 3:53 PM Operation Tires and wheels Placard (USA Only) For vehicles with a gross weight capacity less than 10,000 lbs (4536 kg) only. The tire and loading information placard is located on the driver’s door B-pillar. 4 Tire and loading information placard 1 Seating capacity 2 Load limit information 354 i Seating capacity The data shown on this placard is for illustrative purposes only.
nf_BA.book Page 355 Friday, January 25, 2008 3:53 PM Operation Tires and wheels Load limit information Locate the statement “The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs.” 2 on the tire and loading information placard. The combined weight of all occupants, cargo/luggage and trailer tongue load (if applicable) should never exceed the weight referenced in that statement.
nf_BA.book Page 356 Friday, January 25, 2008 3:53 PM Operation Tires and wheels Step 4 4 The resulting figure equals the available amount of cargo and luggage load capacity. For example, if the “XXX” amount equals 1400 lbs and there will be five 150 lbs passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs (1400-750 (5 x150) = 650 lbs). Step 5 Determine the combined weight of luggage and cargo being loaded on the vehicle.
nf_BA.
nf_BA.book Page 358 Friday, January 25, 2008 3:53 PM Operation Tires and wheels Certification label 4 Even after careful determination of the combined weight of all occupants, cargo and the trailer tongue load (if applicable) as to not exceed the permissible load limit, you must make sure that your vehicle never exceeds the Gross Vehicle Weight Rating (GVWR) and the Gross Axle Weight Rating (GAWR) for either the front or rear axle and the Gross Combination Weight Rating (GCWR) (if applicable).
nf_BA.book Page 359 Friday, January 25, 2008 3:53 PM Operation Tires and wheels Gross Combination Weight Rating (GCWR): The total allowable weight of vehicle and trailer when weighed in cominbation including a 150 lbs (68 kg) allowance for the presence of a driver.
nf_BA.book Page 360 Friday, January 25, 2008 3:53 PM Operation Tires and wheels To assure that your vehicle does not exceed the maximum permissible weight limits (GVWR and GAWR for front and rear axle and GCWR), have the loaded vehicle (including driver, passengers and all cargo and, if applicable, trailer fully loaded) weighed on a suitable commercial scale.
nf_BA.book Page 361 Friday, January 25, 2008 3:53 PM Operation Tires and wheels Recommended tire inflation pressure Warning G Follow recommended tire inflation pressures. Do not underinflate tires. Underinflated tires wear excessively and/or unevenly, adversely affect handling and fuel economy, and are more likely to fail from being overheated. Do not overinflate tires.
nf_BA.book Page 362 Friday, January 25, 2008 3:53 PM Operation Tires and wheels The tires can be considered cold if the vehicle has been parked for at least 3 hours or driven less than 1 mile (1.6 km) at an ambient temperature of approximately 68 °F (20 °C). Follow recommended cold tire inflation pressures listed on vehicle placard. 4 For more information, refer to “Important notes on tire inflation pressure”. Placard The placard is located on the driver’s door B-pillar.
nf_BA.book Page 363 Friday, January 25, 2008 3:53 PM Operation Tires and wheels i The data shown on the tire and loading information placard1and on the tire inflation pressure placard is for illustrative purposes only. Tire data is specific to each vehicle and may vary from the data shown in the illustration below. Refer to your vehicle’s placard for actual data specific to your vehicle. 1 For vehicles with a gross weight capacity less than 10 000 lbs (4 536 kg) (USA only).
nf_BA.book Page 364 Friday, January 25, 2008 3:53 PM Operation Tires and wheels Tire temperature and tire inflation pressure are also increased while driving, depending on the driving speed and the tire load. 4 Tire inflation pressure changes by approximately 1.5 psi (0.1 bar) per 18 °F (10 °C) of air temperature change. Keep this in mind when checking tire inflation pressure where the temperature is different from the outside temperature.
nf_BA.book Page 365 Friday, January 25, 2008 3:53 PM Operation Tires and wheels Checking tire inflation pressure The tire inflation pressure should be checked regularly, i.e. at least each time you refuel the vehicle. The preferred interval for checking the tire inflation pressure, however, is before each trip.
nf_BA.book Page 366 Friday, January 25, 2008 3:53 PM Operation Tires and wheels Warning G Observe the recommended tire inflation pressures. 4 Do not underinflate tires. Underinflated tires wear excessively and/or unevenly, adversely affect handling and fuel economy, and are more likely to fail from being overheated. Continued 366 Warning (Continued) G Do not overinflate tires.
nf_BA.book Page 367 Friday, January 25, 2008 3:53 PM Operation Tires and wheels In addition to the placard also consult the tire inflation pressure table ( page 628). If necessary, add air to achieve the recommended tire inflation pressure. i If you have overfilled the tire, release tire inflation pressure by pushing the metal stem of the valve with for example a tip of a pen. Then recheck the tire inflation pressure with the tire gauge. Reattach the valve cap.
nf_BA.book Page 368 Friday, January 25, 2008 3:53 PM Operation Tires and wheels If the telltale illuminates continuously, one or more of your tires is significantly underinflated. There is no malfunction in the TPMS. If the telltale flashes for 60 seconds and then stays illuminated, the TPMS system itself is not operating properly. i Warning The Tire Pressure Monitoring System (TPMS) is equipped with a low tire pressure telltale in the instrument cluster ( page 20).
nf_BA.book Page 369 Friday, January 25, 2008 3:53 PM Operation Tires and wheels Warning (Continued) G Always ensure that you re-calibrate the TPMS after you inflated the tires to the recommended cold inflation pressure. Always adjust tire inflation pressure according to the tire and loading information placard on the driver’s door B-pillar. Underinflated tires wear excessively and/ or unevenly, adversely affect handling and fuel economy, and are more likely to fail from being overheated.
nf_BA.book Page 370 Friday, January 25, 2008 3:53 PM Operation Tires and wheels Warning (Continued) 4 G As an added safety feature, your vehicle has been equipped with a Tire Pressure Monitoring System (TPMS) that illuminates a low tire pressure telltale when one or more of your tires is significantly underinflated. Accordingly, when the low tire pressure telltale illuminates, you should stop and check your tires as soon as possible, and inflate them to the proper pressure.
nf_BA.book Page 371 Friday, January 25, 2008 3:53 PM Operation Tires and wheels Warning (Continued) G TPMS malfunctions may occur for a variety of reasons, including the installation of incompatible replacement or alternate tires or wheels on the vehicle that prevent the TPMS from functioning properly.
nf_BA.book Page 372 Friday, January 25, 2008 3:53 PM Operation Tires and wheels Warning G It is the driver’s responsibility to calibrate the TPMS on the recommended cold inflation pressure. Underinflated tires affect the ability to steer or brake the vehicle. You might lose control over the vehicle. 4 Make sure the tire inflation pressure of all four tires is correct, using the tire and loading information placard1 1.
nf_BA.book Page 373 Friday, January 25, 2008 3:53 PM Operation Tires and wheels Switch on the ignition ( page 111). Press the 5 menu button on the instrument cluster until you see the +CAL TPMS message in the display. Press the , menu button on the instrument cluster. The following message is displayed: OK TPMS The tire pressure monitor activation process has begun.
nf_BA.book Page 374 Friday, January 25, 2008 3:53 PM Operation Tires and wheels If the telltale flashes for 60 seconds and then stays illuminated, the TPMS system itself is not operating properly. i Canada only: 4 The Tire Pressure Monitoring System (TPMS) is equipped with a low tire pressure telltale in the instrument cluster ( page 20). If the telltale illuminates, one or more of your tires is significantly underinflated.
nf_BA.book Page 375 Friday, January 25, 2008 3:53 PM Operation Tires and wheels Warning 54.32-2278-31 i When the message Tire pres. displayed after driving for several minutes appears in the multifunction G It is the driver’s responsibility to calibrate the TPMS on the recommended cold inflation pressure. Underinflated tires affect the ability to steer or brake the vehicle. You might lose control over the vehicle.
nf_BA.book Page 376 Friday, January 25, 2008 3:53 PM Operation Tires and wheels Warning 4 G The TPMS does not warn you against incorrectly selected tire inflation pressure and does not warn you when the tire pressure is not properly selected for the respective vehicle load. It warns you only when the pressure of one or more tires decreases significantly below the reference inflation pressure which was stored at the time of calibration of the TPMS after you inflated the tires.
nf_BA.book Page 377 Friday, January 25, 2008 3:53 PM Operation Tires and wheels Warning G Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or the tire inflation pressure label.
nf_BA.book Page 378 Friday, January 25, 2008 3:53 PM Operation Tires and wheels Warning (Continued) 4 G USA only: Your vehicle has also been equipped with a TPMS malfunction indicator to indicate when the system is not operating properly. The TPMS malfunction indicator is combined with the low tire pressure telltale. When the system detects a malfunction, the telltale will flash for approximately 1 minute and then remain continuously illuminated.
nf_BA.book Page 379 Friday, January 25, 2008 3:53 PM Operation Tires and wheels Reactivating the Advanced TPMS The TPMS must be reactivated when you have adjusted the tire inflation pressure to a new level (e.g. because of different load or driving conditions). The TPMS is then recalibrated to the current tire inflation pressures.
nf_BA.book Page 380 Friday, January 25, 2008 3:53 PM Operation Tires and wheels Press button è or ÿ on the multifunction steering wheel repeatedly until the standard display menu appears in the multifunction display ( page 157). 4 Press the j or k button repeatedly until you see the current inflation pressures for each tire appear in the display or the following message appears in the display Tire pres.
nf_BA.book Page 381 Friday, January 25, 2008 3:53 PM Operation Tires and wheels 1. Safety Warning G Follow recommended tire inflation pressures. Do not underinflate tires. Underinflated tires wear excessively and/or unevenly, adversely affect handling and fuel economy, and are more likely to fail from being overheated. Do not overinflate tires.
nf_BA.book Page 382 Friday, January 25, 2008 3:53 PM Operation Tires and wheels 3. Ride comfort and vehicle stability Proper tire inflation contributes to a comfortable ride. Overinflation produces a jarring and uncomfortable ride. Tire labeling Besides the tire name (sales designation) and manufacturer's name, a number of markings can be found on a tire. Below are some explanations regarding 4 the markings on your vehicle’s tires: i For illustrative purposes only.
nf_BA.book Page 383 Friday, January 25, 2008 3:53 PM Operation Tires and wheels Tire size designation, load and speed rating i Design standard For illustrative purposes only. The actual data on tires is specific to each vehicle and may vary from the data shown in the above illustration. Depending on the design standards used, the tire size molded into the side wall may have no letter or a letter 1 preceding the tire width or the tire load rating designation.
nf_BA.book Page 384 Friday, January 25, 2008 3:53 PM Operation Tires and wheels Tire width Tire code Tire load rating The tire width 2 indicates the nominal tire width in mm. The tire code 4 indicates the tire construction type. The “R” stands for radial tire type. Letter “D” means diagonal or bias ply construction; letter “B” means belted-bias ply construction. The tire load rating 6 is a numerical code associated with the maximum load a tire can support.
nf_BA.book Page 385 Friday, January 25, 2008 3:53 PM Operation Tires and wheels The commercial vehicle tires based on European standards may have an additional value in the parentheses (as illustrated). In such cases, the value preceding the parentheses is valid for European countries and the parenthesized for the USA and Canada. Refer also to "Maximum tire load" ( page 390) where the maximum load associated with the load index is indicated in kg and lbs.
nf_BA.book Page 386 Friday, January 25, 2008 3:53 PM Operation Tires and wheels Tire speed rating The tire speed rating 6 indicates the approved maximum speed for the tire. 4 The commercial vehicle tires based on European standards may have an additional index in the parentheses. In such cases, the index preceding the parentheses is valid for European countries and the parenthesized for the USA and Canada.
nf_BA.book Page 387 Friday, January 25, 2008 3:53 PM Operation Tires and wheels Index Speed rating i F up to 50 mph (80 km/h) G up to 56 mph (90 km/h) Tire load rating 5 and tire speed rating 6 are also referred to as “service description”.
nf_BA.book Page 388 Friday, January 25, 2008 3:53 PM Operation Tires and wheels i For illustrative purposes only. The actual data on tires is specific to each vehicle and may vary from the data shown in the above illustration. 4 DOT Manufacturer’s identification mark Tire size Tire type code (tire manufacturer's option) 5 Date of manufacture 1 2 3 4 388 The TIN may be found on one or both sides of the tire; however, the date code may only be on one side.
nf_BA.book Page 389 Friday, January 25, 2008 3:53 PM Operation Tires and wheels DOT (Department Of Transportation) Tire type code i A tire branding symbol 1 which denotes the tire meets requirements of the U.S. Department of Transportation. The code 4 may, as the manufacturer's option, be used as a descriptive code for identifying significant characteristics of the tire. Prior to July 2000, tire manufacturers were only required to have 1 number to represent the year in which the tire was manufactured.
nf_BA.book Page 390 Friday, January 25, 2008 3:53 PM Operation Tires and wheels Warning G Maximum tire load i For illustrative purposes only. The actual data on tires is specific to each vehicle and may vary from the data shown in the above illustration. Tires and spare tire should be replaced after 6 years, regardless of the remaining tread. The maximum tire load is the maximum weight the tires are designed to support.
nf_BA.book Page 391 Friday, January 25, 2008 3:53 PM Operation Tires and wheels Warning G Do not overload the tires by exceeding the specified load limit as indicated on the tire and loading information placard on the driver’s door B-pillar. Overloading the tires can overheat them, possibly causing a blowout. Overloading the tires can also result in handling or steering problems, or brake failure. Never overload them.
nf_BA.book Page 392 Friday, January 25, 2008 3:53 PM Operation Tires and wheels i For illustrative purposes only. The actual data on tires is specific to each vehicle and may vary from the data shown in the above illustration. This is the maximum permissible tire inflation pressure for the tire. Always follow the recommended tire in- 4 flation pressure ( page 361) for proper tire inflation. Warning G Never exceed the maximum tire inflation pressure. Follow recommended tire inflation pressures.
nf_BA.book Page 393 Friday, January 25, 2008 3:53 PM Operation Tires and wheels Tire ply material i For illustrative purposes only. The actual data on tires is specific to each vehicle and may vary from the data shown in the above illustration. This marking tells you about the type of cord and number of plies in the side wall and under the tread.
nf_BA.book Page 394 Friday, January 25, 2008 3:53 PM Operation Tires and wheels Air pressure Bar Curb weight The amount of air inside the tire pressing outward on each square inch of the tire. Air pressure is expressed in pounds per square inch (psi), or kilopascal (kPa) or bars. Another metric unit for air pressure. There are 14.5038 pounds per square inch (psi) to 1 bar; there are 100 kilopascals (kPa) to 1 bar.
nf_BA.book Page 395 Friday, January 25, 2008 3:53 PM Operation Tires and wheels GAWR (Gross Axle Weight Rating) The GAWR is the maximum permissible axle weight. The gross vehicle weight on each axle must never exceed the GAWR for the front and rear axle indicated on the certification label located below the driver’s seat on the mounting pillar.
nf_BA.book Page 396 Friday, January 25, 2008 3:53 PM Operation Tires and wheels 4 GVWR (Gross Vehicle Weight Rating) Maximum load rating Normal occupant weight This is the maximum permissible vehicle weight of the fully loaded vehicle (weight of the vehicle including all options, passengers, fuel, and cargo and, if applicable, trailer tongue load). It is indicated on the certification label located below the driver’s seat on the mounting pillar.
nf_BA.book Page 397 Friday, January 25, 2008 3:53 PM Operation Tires and wheels Production options weight Recommended tire inflation pressure Side wall The combined weight of those installed regular production options weighing over 5 lbs (2.3 kg) in excess of those standard items which they replace, not previously considered in curb weight or accessory weight, including heavy duty brakes, ride levelers, roof rack, heavy duty battery, and special trim.
nf_BA.book Page 398 Friday, January 25, 2008 3:53 PM Operation Tires and wheels 4 Tire load rating Tire speed rating Treadwear Indicators Numerical code associated with the maximum load a tire can support. Part of tire designation; indicates the speed range for which a tire is approved. Tire ply composition and material used Traction Narrow bands, sometimes called “wear bars” that show across the tread of a tire when only 1/16 in (1.6 mm) of tread remains.
nf_BA.book Page 399 Friday, January 25, 2008 3:53 PM Operation Tires and wheels Uniform tire quality grading standards A tire information system that provides consumers with ratings for a tire’s traction, temperature and treadwear. Ratings are determined by tire manufacturers using government testing procedures. The ratings are molded into the side wall of the tire. Vehicle capacity weight Rotating tires Rated cargo and luggage load plus 68 kg (150 lbs) times the vehicle’s designated seating capacity.
nf_BA.book Page 400 Friday, January 25, 2008 3:53 PM Operation Tires and wheels Warning (Continued) G could result in changes to steering, handling, and braking of your Sprinter vehicle. This can cause unpredictable handling and stress to steering and suspension components. You could lose control and have an accident resulting in serious injury or death. 4 could result in tire overloading and failure, if the tires' load index are not identical. You could lose control and have an accident.
nf_BA.book Page 401 Friday, January 25, 2008 3:53 PM Operation Tires and wheels Rotate tires before the characteristic tire wear pattern becomes visible (shoulder wear on front tires and tread center wear on rear tires). The reasons for any rapid or unusual wear should be corrected prior to rotation being performed. !CAUTION If your vehicle is equipped with the tire pressure monitor*, each wheel has an electronic component.
nf_BA.book Page 402 Friday, January 25, 2008 3:53 PM Operation Tires and wheels Warning (Continued) G If a wheel hub thread is damaged, you must not drive the vehicle. Consult an authorized Sprinter Dealer. 4 Only use genuine wheel bolts approved by the vehicle manufacturer and specified for your vehicle’s rims. Check tightness of wheel bolts or nuts regularly and retighten with a torque wrench, if necessary. Tighten wheel bolts or nuts in a crisscross pattern.
nf_BA.book Page 403 Friday, January 25, 2008 3:53 PM Operation Tires and wheels Make sure that on one axle just one type of tire (same size, type construction, load and speed rating) is used. Dual rear wheels: Rotate front tires by axle and the outer rear tire side to side if there is no approved direction of rotation. The tires used on dual wheel assemblies should be matched for wear to prevent overloading one tire in a set. To check if tires are even, lay a straight edge across all four tires.
nf_BA.book Page 404 Friday, January 25, 2008 3:53 PM Operation Winter driving Winter driving 4 Have your vehicle winterproofed at the onset of winter at an authorized Sprinter Dealer.
nf_BA.book Page 405 Friday, January 25, 2008 3:53 PM Operation Winter driving For safe handling, make sure all winter tires mounted are of the same make and have the same tread design. Warning G Winter tires with a tread depth under 1/6 in (4 mm) must be replaced. They are no longer suitable for winter operation. Always observe the speed rating of the winter tires installed on your vehicle.
nf_BA.book Page 406 Friday, January 25, 2008 3:53 PM Operation Winter driving i When they have been removed, store wheels and tires in a cool, dry, and if possible dark place. Protect the tires from oil, grease, and gasoline/ diesel. Driving in winter Warning G Downshifting to brake could cause the drive wheels to lose grip on a slippery surface due to the increased difference in speed between the engine and the drive wheels at this time.
nf_BA.book Page 407 Friday, January 25, 2008 3:53 PM Operation Winter driving Apply the brakes regularly when making longer journeys on gritted or salted roads. This will have the effect of restoring the brakes to their normal level of performance. When stopping the vehicle after traveling on roads that have been salted, check that the brakes are fully functional before proceeding further. Snow chains Use "Class U" chains, or other traction aids that meet SAE Type "U" specifications.
nf_BA.book Page 408 Friday, January 25, 2008 3:53 PM Operation Winter driving 4 Please observe the following guidelines when using snow chains: Snow chains should only be used on rear wheels. In vehicles with dual rear wheels, they should be mounted on the exterior wheels. Follow the manufacturer’s mounting instructions. Only use snow chains that are approved by the vehicle manufacturer. For approved snow chains, please contact your authorized Sprinter Dealer.
nf_BA.book Page 409 Friday, January 25, 2008 3:53 PM Operation Maintenance and servicing Maintenance and servicing Warning G Before carrying out maintenance operations and repairs, please make sure that you read the relevant sections of the technical documentation, such as: Operating instructions and workshop information Familiarize yourself in advance in particular with legal requirements, such as: Safety at work and accident prevention regulations.
nf_BA.book Page 410 Friday, January 25, 2008 3:53 PM Operation Maintenance and servicing Warning (Continued) G The manufacturer recommends that you use an authorized Sprinter Dealer for this purpose. In particular, work relevant to safety or on safety-related systems must be carried out at an authorized Sprinter Dealer. 4 Service products Mechanical elements and the lubricants used for them must be carefully matched. For this reason, only brands tested and approved by the manufacturer should be used.
nf_BA.book Page 411 Friday, January 25, 2008 3:53 PM Operation Maintenance and servicing Active Service System (ASSYST)* ASSYST, the Active Service System, informs you when the next service is due. A service that is due is displayed about a month or 1900 miles (3000 km) in advance. A message is then displayed while the vehicle is in motion or the ignition is switched on. !CAUTION i Periods when the battery is disconnected will not be recorded by ASSYST.
nf_BA.book Page 412 Friday, January 25, 2008 3:53 PM Operation Maintenance and servicing Service due date display Vehicles without steering wheel buttons Vehicles with steering wheel buttons The following messages may be displayed: 9 for service A ´ for service B The following messages may be displayed: 9 Service A in .. days 9 Service A in .. miles (km) 9 Service A due now 4 The letters A or B indicate the type of service that is due.
nf_BA.book Page 413 Friday, January 25, 2008 3:53 PM Operation Maintenance and servicing Vehicles with steering wheel buttons* If you have missed the service due date, one of the following messages appears in the display: 9 Service A overdue by .. days 9 Service A overdue by .. miles (km) A signal also sounds.
nf_BA.book Page 414 Friday, January 25, 2008 3:53 PM Operation Maintenance and servicing Vehicles without steering wheel buttons Air cleaner for the air-conditioning system in the rear compartment* Press the menu button on the instrument cluster repeatedly until you see the following in the display: An increased amount of sand or dust may collect in the air cleaner when you drive on dusty or sandy roads.
nf_BA.book Page 415 Friday, January 25, 2008 3:53 PM Operation Maintenance and servicing Removing the air cleaner element Cleaning the filter mat Installing the air cleaner element Carefully pry cover 1 out of recesses 2 and remove it. Wash the filter mat with clean water. Insert the filter mat. Leave the filter mat to dry. Attach cover 1. Remove the filter mat. !CAUTION The filter mat must not be cleaned or dried in a machine.
nf_BA.book Page 416 Friday, January 25, 2008 3:53 PM Operation Cleaning and care of the vehicle Cleaning and care of the vehicle Regular and proper care will help to maintain the value of your vehicle. The best way to protect your vehicle from harmful environmental influences is to wash it and use protective treatments regularly. i 4 It is recommended that you use Mopar care products. These have been specially adapted to Sprinter vehicles and are state of the art.
nf_BA.book Page 417 Friday, January 25, 2008 3:53 PM Operation Cleaning and care of the vehicle Environmental note H Only clean the vehicle in a suitable place for washing vehicles. Dispose of empty containers and used cleaning materials in an environmentally responsible manner. i If you need to clean the areas towards the top of the vehicle, always use suitable ladders secure steps !CAUTION Under no circumstances should you affix unsuitable stickers, films, magnets or similar to painted surfaces.
nf_BA.book Page 418 Friday, January 25, 2008 3:53 PM Operation Cleaning and care of the vehicle Automatic car wash !CAUTION !CAUTION You can clean the vehicle in an automatic car wash from the very start. It is preferable to use a car wash that does not have brushes. Make sure that the automatic car wash is suitable for the size of the vehicle.
nf_BA.book Page 419 Friday, January 25, 2008 3:53 PM Operation Cleaning and care of the vehicle After using an automatic car wash, wipe off wax from the windshield and the wiper blades. This prevents smears and reduces wiping noises which can be caused by residue on the windshield. High-pressure cleaners !CAUTION Do not use high-pressure cleaners with round-spray jets for cleaning the tires. You could otherwise damage the tires. Have damaged tires replaced.
nf_BA.book Page 420 Friday, January 25, 2008 3:53 PM Operation Cleaning and care of the vehicle Steps Warning Engine cleaning G Dirty or iced-up steps and entrances create a risk of slipping or falling. Keep steps, entrances and footwear free from dirt (e.g. mud, clay, snow and ice). 4 !CAUTION Do not allow water to enter the intake and ventilation openings.
nf_BA.book Page 421 Friday, January 25, 2008 3:53 PM Operation Cleaning and care of the vehicle Outside of windshield and wiper blades Turn key to position 1 in ignition lock ( page 111). Switch on windshield wipers ( page 210). When the wiper arms are vertical, turn key to position 0 in the ignition lock or remove the key. Fold the wiper arms away from the windshield until you feel them engage in place. Warning G Switch off the ignition before cleaning the windshield or the wiper blades.
nf_BA.book Page 422 Friday, January 25, 2008 3:53 PM Operation Cleaning and care of the vehicle Headlamps Parktronic sensors* Wipe the headlamp lenses with a damp sponge. The sensors are located in the front and rear bumpers. !CAUTION Only use washer fluid which is suitable for plastic lamp lenses. For this reason, do not use a dry cloth, abrasive material, solvent or solvent-based cleaning agent. You could otherwise scratch or damage the lens surface.
nf_BA.book Page 423 Friday, January 25, 2008 3:53 PM Operation Cleaning and care of the vehicle Be careful not to apply wax to the camera lens 1 when waxing the vehicle. If necessary, remove the wax using shampoo with plenty of water. !CAUTION Rear view camera 1 2 Camera lens Microphone openings Clean the camera lens 1 using water and a soft cloth only. Do not use dry, coarse or hard cloths and aggressive cleaning agents. Do not scrub or use high pressure.
nf_BA.book Page 424 Friday, January 25, 2008 3:53 PM Operation Cleaning and care of the vehicle !CAUTION !CAUTION Use a low-foaming grease solvent (e.g. washing-up liquid) diluted in water as a cleaning agent. Use a solvent-free and non-caustic cleaning agent. The manufacturer recommends that you use a Mercedes-Benz product. The surface color may temporarily change shade during cleaning. Simply wait for the surface to dry. The surface color may temporarily change shade during cleaning.
nf_BA.book Page 425 Friday, January 25, 2008 3:53 PM Operation Cleaning and care of the vehicle Clean the display surface with a commercially-available microfiber cloth and cleaner for TFT/LCD displays. After drying, wipe the display surface with a dry microfiber cloth using only slight pressure. !CAUTION Do not use dry, coarse or hard cloths, abrasive material, solvent or solventbased cleaning agent. Do not scrub or use high pressure.
nf_BA.book Page 426 Friday, January 25, 2008 3:53 PM Operation Cleaning and care of the vehicle Warning (Continued) G Risk of skidding Dirt and mud on the tires/road surface reduce wheel grip. This is especially so if the road surface is wet. The vehicle could then start to skid. Risk of slipping 4 Dirt and mud on the steps and entrances make the steps less safe. As a result you could slip from the steps and injure yourself.
nf_BA.book Page 427 Friday, January 25, 2008 3:53 PM Operation Cleaning and care of the vehicle Warning (Continued) G The manufacturer recommends that you use an authorized Sprinter Dealer for this purpose. In particular, work relevant to safety or on safety-related systems must be carried out at an authorized Sprinter Dealer. Check them for damage and have any damage repaired by an authorized Sprinter Dealer if necessary.
nf_BA.
nf_BA.book Page 429 Friday, January 25, 2008 3:53 PM Practical hints Practical hints What to do if .............. 430 Display messages........... 484 Where will I find...?........... 513 Changing bulbs........... 525 Changing the batteries........... 539 Fuel system........... 542 Replacing the wiper blades........... 545 Flat tire........... 547 Battery........... 573 5 Jump-starting........... 581 Towing........... 585 Fuses...........
nf_BA.book Page 430 Friday, January 25, 2008 3:53 PM Practical hints What to do if ... Audible warning signals Warning Warning (Continued) G Always have maintenance work carried out at an authorized Sprinter Dealer Continued G which has the necessary specialist knowledge and tools to carry out the work required. The manufacturer recommends that you use an authorized Sprinter Dealer for this purpose.
nf_BA.book Page 431 Friday, January 25, 2008 3:53 PM Practical hints What to do if ... Problem Possible cause/result Suggested solutions The anti-theft alarm system is suddenly triggered. You have opened the vehicle using the key while the anti-theft alarm system was still primed. Key: Press the Πbutton. or Insert the key into the ignition lock. The anti-theft alarm system is deactivated. You hear a warning signal. A message appears in the display. Observe the instructions on ( page 484).
nf_BA.book Page 432 Friday, January 25, 2008 3:53 PM Practical hints What to do if ... Accident Warning Warning (Continued) G Always have maintenance work carried out at an authorized Sprinter Dealer Continued G which has the necessary specialist knowledge and tools to carry out the work required. The manufacturer recommends that you use an authorized Sprinter Dealer for this purpose.
nf_BA.book Page 433 Friday, January 25, 2008 3:53 PM Practical hints What to do if ... Problem Fuel is leaking from the vehicle. Possible cause/result Risk of fire and explosion Suggested solutions G The fuel line or fuel tank is malfunctioning. There is a risk of fire and explosion from leaking fuel. Switch off the ignition immediately. Remove the key. Do not restart the engine under any circumstances. Consult an authorized Sprinter Dealer.
nf_BA.book Page 434 Friday, January 25, 2008 3:53 PM Practical hints What to do if ... Fuel and fuel tank Warning Warning (Continued) G Always have maintenance work carried out at an authorized Sprinter Dealer Continued G which has the necessary specialist knowledge and tools to carry out the work required. The manufacturer recommends that you use an authorized Sprinter Dealer for this purpose.
nf_BA.book Page 435 Friday, January 25, 2008 3:53 PM Practical hints What to do if ... Problem Possible cause/result Suggested solutions The fuel tank has been run dry and the vehicle has a diesel engine. There is air in the fuel system. Bleed the fuel system ( page 544). Fuel is leaking from the vehicle. Risk of fire and explosion G The fuel line or fuel tank is malfunctioning. There is a risk of fire and explosion from leaking fuel. Switch off the ignition immediately. Remove the key.
nf_BA.book Page 436 Friday, January 25, 2008 3:53 PM Practical hints What to do if ... Engine Warning Warning (Continued) G Always have maintenance work carried out at an authorized Sprinter Dealer Continued G which has the necessary specialist knowledge and tools to carry out the work required. The manufacturer recommends that you use an authorized Sprinter Dealer for this purpose.
nf_BA.book Page 437 Friday, January 25, 2008 3:53 PM Practical hints What to do if ... Problem Possible cause/result The engine does not start. You can hear the starter motor working. There may be a malfunction in the fuel supply. Turn the key back to position 0 in the ignition lock before the next starting attempt. Start the engine again. Note that excessively long attempts to start the engine may drain the battery.
nf_BA.book Page 438 Friday, January 25, 2008 3:53 PM Practical hints What to do if ... Problem Possible cause/result Suggested solutions The engine does not start. You cannot hear the starter motor working. The on-board voltage is too low (the battery has The engine may be jump-started too little charge or is discharged). ( page 581). The selector lever is not in position P or N. If the engine does not start despite jumpstarting: Consult an authorized Sprinter Dealer.
nf_BA.book Page 439 Friday, January 25, 2008 3:53 PM Practical hints What to do if ... Problem Possible cause/result Suggested solutions The coolant temperature gauge is above 250 °F (+120 °C). The coolant is too hot and the engine is not be- Park your vehicle in a safe location as ing sufficiently cooled. quickly as possible and let the engine continue to run at idle speed for about 1 to 2 minutes before switching it off. This allows the coolant temperature to return to normal again.
nf_BA.book Page 440 Friday, January 25, 2008 3:53 PM Practical hints What to do if ... Automatic transmission Warning Warning (Continued) G Always have maintenance work carried out at an authorized Sprinter Dealer Continued G which has the necessary specialist knowledge and tools to carry out the work required. The manufacturer recommends that you use an authorized Sprinter Dealer for this purpose.
nf_BA.book Page 441 Friday, January 25, 2008 3:53 PM Practical hints What to do if ... Problem Possible cause/result The transmission no longer changes gear cor- The transmission is losing oil. rectly. The acceleration ability is deteriorating. The transmission does not shift. Suggested solutions Have the transmission checked immediately at an authorized Sprinter Dealer. Stop the vehicle. It is only possible to shift into second gear or re- Move the selector lever to position P. verse gear.
nf_BA.book Page 442 Friday, January 25, 2008 3:53 PM Practical hints What to do if ... Headlamps and turn signals Warning Warning (Continued) G Always have maintenance work carried out at an authorized Sprinter Dealer Continued G which has the necessary specialist knowledge and tools to carry out the work required. The manufacturer recommends that you use an authorized Sprinter Dealer for this purpose.
nf_BA.book Page 443 Friday, January 25, 2008 3:53 PM Practical hints What to do if ... Windshield wipers Warning Warning (Continued) G Always have maintenance work carried out at an authorized Sprinter Dealer Continued G which has the necessary specialist knowledge and tools to carry out the work required. The manufacturer recommends that you use an authorized Sprinter Dealer for this purpose.
nf_BA.book Page 444 Friday, January 25, 2008 3:53 PM Practical hints What to do if ... Problem Possible cause/result Suggested solutions Leaves or snow, for example, are hindering the Stop the vehicle as soon as possible movement of the windshield wipers. and, for safety reasons, remove the key The wiper motor has switched off. from the ignition lock. Remove the cause of the obstruction. Switch on the windshield wipers again.
nf_BA.book Page 445 Friday, January 25, 2008 3:53 PM Practical hints What to do if ... Remote control Warning Warning (Continued) G Always have maintenance work carried out at an authorized Sprinter Dealer Continued G which has the necessary specialist knowledge and tools to carry out the work required. The manufacturer recommends that you use an authorized Sprinter Dealer for this purpose.
nf_BA.book Page 446 Friday, January 25, 2008 3:53 PM Practical hints What to do if ... Problem Possible cause/result It is no longer possible to lock the vehicle us- The doors are not closed properly. ing the remote control. Suggested solutions Close the doors properly and lock the vehicle again. The turn signals do not flash when the vehicle The central locking system has malfunctioned. Lock the vehicle using the key ( page 88). is locked.
nf_BA.book Page 447 Friday, January 25, 2008 3:53 PM Practical hints What to do if ... Problem Possible cause/result Suggested solutions It is no longer possible to lock or unlock the vehicle using the remote control. The remote control batteries are weak or discharged. Point the remote control towards the driver’s door handle at close range and try again. If this does not work: Lock or unlock the vehicle using the key ( page 88). Check the batteries of the remote control ( page 86).
nf_BA.book Page 448 Friday, January 25, 2008 3:53 PM Practical hints What to do if ... Problem Possible cause/result Suggested solutions The battery check lamp on the remote control The remote control batteries are discharged. does not light up briefly when a button is pressed. Change the batteries ( page 540). You have lost a remote control. Have the remote control canceled at an authorized Sprinter Dealer. Report the loss immediately to the vehicle insurers.
nf_BA.book Page 449 Friday, January 25, 2008 3:53 PM Practical hints What to do if ... Problem Possible cause/result The key can no longer be turned in the ignition The on-board voltage is too low. lock. Suggested solutions Remove the key and re-insert it into the ignition lock. Switch off all non-essential consumers, for example the seat heating, interior lighting, and try to turn the key again. If this does not work: Check the starter battery and charge it if necessary.
nf_BA.book Page 450 Friday, January 25, 2008 3:53 PM Practical hints What to do if ... Driving systems Warning Warning (Continued) G Always have maintenance work carried out at an authorized Sprinter Dealer Continued G which has the necessary specialist knowledge and tools to carry out the work required. The manufacturer recommends that you use an authorized Sprinter Dealer for this purpose.
nf_BA.book Page 451 Friday, January 25, 2008 3:53 PM Practical hints What to do if ... Problem Possible cause/result Suggested solutions Only the red segments in the Parktronic* warning displays are lit. A warning tone also sounds for approximately 2 seconds. Parktronic* switches off after approximately 20 seconds. The indicator lamp on the Parktronic switch comes on and the red segments in the warning display go out. Parktronic* has malfunctioned and has switched off.
nf_BA.book Page 452 Friday, January 25, 2008 3:53 PM Practical hints What to do if ... Problem Possible cause/result Suggested solutions The Parktronic* warning displays indicate im- The Parktronic* sensors are dirty or iced up. plausible distances. Clean the Parktronic* sensors ( page 422). For example, all the segments may be lit even though there is no obstacle present. Switch on the ignition again. The speed cannot be set with cruise control* activated1.
nf_BA.book Page 453 Friday, January 25, 2008 3:53 PM Practical hints What to do if ... Auxiliary heating* Warning Warning (Continued) G Always have maintenance work carried out at an authorized Sprinter Dealer which has the necessary specialist knowledge and tools to carry out the work required. G The manufacturer recommends that you use an authorized Sprinter Dealer for this purpose.
nf_BA.book Page 454 Friday, January 25, 2008 3:53 PM Practical hints What to do if ... Problem Possible cause/result The battery check lamp on the remote control The remote control batteries are discharged. for the auxiliary heating does not light up briefly when a button is pressed. Suggested solutions Change the remote control batteries ( page 541). The auxiliary heating does not switch on or the Lack of fuel. Refuel at the nearest refueling station. engine does not start.
nf_BA.book Page 455 Friday, January 25, 2008 3:53 PM Practical hints What to do if ... Problem Possible cause/result Suggested solutions The auxiliary heating does not switch on or the the auxiliary heating checked at WARNING G Have engine does not start an authorized Sprinter Dealer. The auxiliary heating has overheated about ten times in succession. The engine or heater is malfunctioning. The heater has overheated. The coolant level is too low.
nf_BA.book Page 456 Friday, January 25, 2008 3:53 PM Practical hints What to do if ... Leaving the vehicle in storage Warning G Always have maintenance work carried out at an authorized Sprinter Dealer Continued Warning (Continued) G which has the necessary specialist knowledge and tools to carry out the work required. The manufacturer recommends that you use an authorized Sprinter Dealer for this purpose.
nf_BA.book Page 457 Friday, January 25, 2008 3:53 PM Practical hints What to do if ... Indicator and warning lamps in switches Warning G Always have maintenance work carried out at an authorized Sprinter Dealer Continued Warning (Continued) G which has the necessary specialist knowledge and tools to carry out the work required. The manufacturer recommends that you use an authorized Sprinter Dealer for this purpose.
nf_BA.book Page 458 Friday, January 25, 2008 3:53 PM Practical hints What to do if ... Problem Possible cause/result Suggested solutions One or both of the indicator lamps in the There is insufficient voltage available as switch for the seat heating * are too many consumers are switched on. flashing. The seat heating has been switched off automatically. Switch off all non-essential consumers, for example the reading lamps, interior lighting, etc.
nf_BA.book Page 459 Friday, January 25, 2008 3:53 PM Practical hints What to do if ... Problem Possible cause/result Suggested solutions The residual engine heat utilization function switches off too soon or cannot be switched on. The indicator lamp in the ° switch does not light up. There is insufficient voltage available as too many consumers are switched on. Switch off all non-essential consumers, for example the reading lamps, interior lighting, etc.
nf_BA.book Page 460 Friday, January 25, 2008 3:53 PM Practical hints What to do if ... Indicator and warning lamps in the instrument cluster Warning G Always have maintenance work carried out at an authorized Sprinter Dealer Continued Warning (Continued) G which has the necessary specialist knowledge and tools to carry out the work required. The manufacturer recommends that you use an authorized Sprinter Dealer for this purpose.
nf_BA.book Page 461 Friday, January 25, 2008 3:53 PM Practical hints What to do if ... Problem v Possible cause/result Suggested solutions ® The yellow ASR/ESP warning your driving style to suit the road WARNING G Adapt lamp flashes while the vehicle is in and traffic conditions. Do not use too ESP® or ASR is intervening because at least one motion. much throttle. of the wheels has reached its tire grip limit. Drive slowly.
nf_BA.book Page 462 Friday, January 25, 2008 3:53 PM Practical hints What to do if ... Problem Possible cause/result Suggested solutions ESP®, # k 6 The yellow ABS-, ASR/BAS observe the messages in the disWARNING G Also indicator lamps and the red brake play on vehicles with steering wheel system indicator lamp are lit while EBV has malfunctioned. buttons ( page 489). the engine is running.
nf_BA.book Page 463 Friday, January 25, 2008 3:53 PM Practical hints What to do if ... Problem 6 Possible cause/result Suggested solutions The red brake system indicator observe the messages in the disWARNING G Also lamp is lit while the engine is runplay on vehicles with steering wheel There is insufficient brake fluid in the fluid resning. buttons ( page 489). ervoir. A signal also sounds. Do not add brake fluid under any circumstances. This will not solve the problem.
nf_BA.book Page 464 Friday, January 25, 2008 3:53 PM Practical hints What to do if ... Problem 6 Possible cause/result When towing a trailer: WARNING Suggested solutions G The red brake system indicator lamp is lit while the engine is run- The trailer's brake booster is malfunctioning. The vehicle's driving and braking characterisning. tics may change. There is a risk of the trailer A signal also sounds. overbraking.
nf_BA.book Page 465 Friday, January 25, 2008 3:53 PM Practical hints What to do if ... Problem k Possible cause/result Suggested solutions The yellow ASR/BAS indicadriving, but with even greater WARNING G Continue care. tor lamp is lit while the engine is running. ASR has been deactivated due to a malfunction. Have the system checked at an authorized Sprinter Dealer as soon as possiThe engine power output may then be lower. ble. WARNING G Continue driving, but with even greater care.
nf_BA.book Page 466 Friday, January 25, 2008 3:53 PM Practical hints What to do if ... Problem - Possible cause/result Suggested solutions observe the messages in the disThe yellow ABS indicator WARNING G Also play on vehicles with steering wheel lamp is lit while the engine is buttons ( page 489). ABS has been deactivated due to a malfunction. running. ESP®, ASR and BAS as well as cruise control have Continue driving, but with even greater also been deactivated as a result. care.
nf_BA.book Page 467 Friday, January 25, 2008 3:53 PM Practical hints What to do if ... Problem Possible cause/result Suggested solutions ABS has been deactivated due to undervoltage. Continue driving, but with even greater care. The battery may not be being charged. The brake system continues to function with the nor- Have the system checked at an authorized Sprinter Dealer as soon as possimal braking effect but with no electronic support. ble.
nf_BA.book Page 468 Friday, January 25, 2008 3:53 PM Practical hints What to do if ... Problem # Possible cause/result Suggested solutions observe the messages in the disThe yellow ESP® indicator WARNING G Also play on vehicles with steering wheel lamp is lit while the engine is ESP® has been deactivated due to a malfunction. buttons ( page 489). running. Cruise control is also switched off as a result.
nf_BA.book Page 469 Friday, January 25, 2008 3:53 PM Practical hints What to do if ... Problem 1 # Possible cause/result The red SRS warning lamp does not go out after approximately 4 seconds after the ignition system is switched on or lights up again. WARNING Suggested solutions G Drive on with even greater care to an authorized Sprinter Dealer. The restraint systems have malfunctioned.
nf_BA.book Page 470 Friday, January 25, 2008 3:53 PM Practical hints What to do if ... Problem Possible cause/result Suggested solutions The battery is malfunctioning. Stop your vehicle as soon as it is safe to do so. Do not drive any further. Contact a breakdown service, an authorized Sprinter Dealer. 2 5 470 the brake pads/linings replaced The yellow brake pad wear WARNING G Have as soon as possible at an authorized indicator lamp lights up after Sprinter Dealer.
nf_BA.book Page 471 Friday, January 25, 2008 3:53 PM Practical hints What to do if ... Problem : Possible cause/result The yellow engine oil level warning lamp flashes after the engine is started or while the vehicle is in motion. Suggested solutions The engine oil level has dropped to the minimum lev- Check the engine oil level and add enel. If the engine oil level falls any further, the indicagine oil at the nearest refueling station tor lamp will light up continuously. ( page 328).
nf_BA.book Page 472 Friday, January 25, 2008 3:53 PM Practical hints What to do if ... Problem : Possible cause/result The yellow engine oil level There is insufficient or no oil in the engine. warning lamp lights up, the - There is a risk of engine damage. 2.0 l engine oil level message appears in the display and the warning buzzer sounds after the engine is started or while the vehicle is in motion. Suggested solutions Stop your vehicle as soon as it is safe to do so. Switch off the engine.
nf_BA.book Page 473 Friday, January 25, 2008 3:53 PM Practical hints What to do if ... Problem : : Possible cause/result Suggested solutions The yellow engine oil level The engine oil level has exceeded the maximum levwarning lamp lights up, the el. HI engine oil level message appears in the display and the warning buzzer sounds after the engine is started or while the vehicle is in motion.
nf_BA.book Page 474 Friday, January 25, 2008 3:53 PM Practical hints What to do if ... Problem / Possible cause/result The coolant level is too low. The yellow coolant level warning lamp lights up while Never run the engine if the coolant level is too low. the engine is running. The engine could overheat and be damaged. Suggested solutions Stop at the earliest opportunity. Switch off the engine to cool down. Check the coolant level and add coolant as necessary ( page 329).
nf_BA.book Page 475 Friday, January 25, 2008 3:53 PM Practical hints What to do if ... Problem • Possible cause/result The coolant temperature is too high. The red coolant warning lamp lights up while the engine is running. Suggested solutions Do not drive any further. Consult an authorized Sprinter Dealer. If the vehicle is switched off after being subjected to extreme loads (for example driving in mountainous terrain, trailer towing, etc.
nf_BA.book Page 476 Friday, January 25, 2008 3:53 PM Practical hints What to do if ... Problem A q 5 476 Possible cause/result Suggested solutions The fuel filler cap is not closed. The yellow reserve fuel warning lamp lights up while the engine is running and the gauge for the fuel tank shows zero although there is still fuel in the tank. Close the fuel filler cap. A clicking sound indicates that the fuel filler cap is closed.
nf_BA.book Page 477 Friday, January 25, 2008 3:53 PM Practical hints What to do if ... Problem ± ‰ Possible cause/result Suggested solutions Refuel at the nearest refueling station. The yellow engine diagnostic The fuel tank has run dry. indicator lamp lights up or The engine may be running in emergency mode. On vehicles with a diesel engine: Bleed the fuel system ( page 544). flashes while the engine is Start the engine three to four times after refurunning. eling.
nf_BA.book Page 478 Friday, January 25, 2008 3:53 PM Practical hints What to do if ... Problem X Possible cause/result USA only: Combination low tire pressure/ TPMS malfunction telltale for TPMS lights up continuously. Canada only: Low tire pressure telltale for TPMS lights up continuously. 5 478 Suggested solutions Carefully bring the vehicle to a halt, avoiding abrupt steering and braking The TPMS detects a loss of pressure in at least maneuvers. Observe the traffic situaone tire.
nf_BA.book Page 479 Friday, January 25, 2008 3:53 PM Practical hints What to do if ... X USA only: Combination low tire pressure/ TPMS malfunction telltale for TPMS flashes 60 seconds and then stays illuminated. There is a malfunction in the TPMS. Read and observe messages in the multifunction display. Have the TPMS checked at an authorized Sprinter Dealer as soon as possible.
nf_BA.book Page 480 Friday, January 25, 2008 3:53 PM Practical hints What to do if ... Warning! 5 G Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or the tire inflation pressure label.
nf_BA.book Page 481 Friday, January 25, 2008 3:53 PM Practical hints What to do if ... Warning (Continued) G USA only: Your vehicle has also been equipped with a TPMS malfunction indicator to indicate when the system is not operating properly. The TPMS malfunction indicator is combined with the low tire pressure telltale. When the system detects a malfunction, the telltale will flash for approximately 1 minute and then remain continuously illuminated.
nf_BA.book Page 482 Friday, January 25, 2008 3:53 PM Practical hints What to do if ... Problem Possible cause/result Suggested solutions / The yellow water separator indi- The water that has collected in the water sepa- Drain the water separator ( page 542). cator lamp1 lights up while the ig- rator has reached the maximum level. nition is on. Have the water separator drained at an authorized Sprinter Dealer. W The yellow washer fluid level indi- The windshield washer fluid level is too low.
nf_BA.book Page 483 Friday, January 25, 2008 3:53 PM Practical hints What to do if ... One of the bulbs of the exterior lighting or on the trailer is malfunctioning. Have the malfunction rectified as soon as possible at an authorized Sprinter Dealer. . The yellow bulb indicator lamp lights up while the ignition is on. 9 The yellow “door open” indicator You are already driving at walking pace, even Close the doors or the hood.
nf_BA.book Page 484 Friday, January 25, 2008 3:53 PM Practical hints Display messages i All warning/indicator lamps (except the turn signal indicator lamps) and the display are activated when the ignition is switched on. Please check that they are working properly before commencing a journey. 5 Display messages on vehicles without steering wheel buttons Warnings, malfunctions or additional information may also be shown in the display.
nf_BA.book Page 485 Friday, January 25, 2008 3:53 PM Practical hints Display messages Warning (Continued) G Contact an authorized Sprinter Dealer immediately which has the necessary specialist knowledge and tools to carry out the work required. The manufacturer recommends that you use an authorized Sprinter Dealer for this purpose. In particular, work relevant to safety or on safety-related systems must be carried out at an authorized Sprinter Dealer.
nf_BA.book Page 486 Friday, January 25, 2008 3:53 PM Practical hints Display messages Display messages Possible cause/result Possible solution N There is insufficient or no oil in the engine. There is a risk of engine damage. Stop your vehicle as soon as it is safe to do so. Switch off the engine. Check the engine oil level using the dipstick ( page 326). If the oil level is correct, have the malfunction rectified immediately at an authorized Sprinter Dealer.
nf_BA.book Page 487 Friday, January 25, 2008 3:53 PM Practical hints Display messages Display messages Possible cause/result Possible solution NO The message is displayed for 30 seconds. The TPMS is malfunctioning. Have the TPMS checked at an authorized Sprinter Dealer as soon as possible.
nf_BA.book Page 488 Friday, January 25, 2008 3:53 PM Practical hints Display messages Display messages Possible cause/result Possible solution — — The message is displayed for 30 seconds. The tire pressure monitor detects a moderate loss of pressure in at least one of the tires, or the difference in pressure on one axle is too great. Check the tire pressure at the earliest opportunity and correct it if necessary. TPMS The message is also displayed after 30 seconds.
nf_BA.book Page 489 Friday, January 25, 2008 3:53 PM Practical hints Display messages Display messages on vehicles with steering wheel buttons The operating system shows warnings, malfunctions or additional information in the display. Certain messages are accompanied by a warning signal or a permanent tone. High-priority messages are highlighted in red in the display. Please respond in accordance with the messages and follow the additional notes in these Operating instructions.
nf_BA.book Page 490 Friday, January 25, 2008 3:53 PM Practical hints Display messages Warning (Continued) G Contact an authorized Sprinter Dealer immediately which has the necessary specialist knowledge and tools to carry out the work required. 5 The manufacturer recommends that you use an authorized Sprinter Dealer for this purpose. In particular, work relevant to safety or on safety-related systems must be carried out at an authorized Sprinter Dealer.
nf_BA.book Page 491 Friday, January 25, 2008 3:53 PM Practical hints Display messages Text messages Display messages ABS Visit workshop Possible cause/result WARNING Possible solution G ABS has been deactivated due to a malfunction. ESP®, ASR and BAS as well as cruise control have also been deactivated as a result. The brake system is still available with the full brake boosting effect but without ABS. unavailable Continue driving, but with even greater care.
nf_BA.book Page 492 Friday, January 25, 2008 3:53 PM Practical hints Display messages Display messages 5 492 Possible cause/result Possible solution ABS has been deactivated due to undervoltage. The battery may not be being charged. The brake system is still available with the normal braking effect. Continue driving, but with even greater care. Visit an authorized Sprinter Dealer immediately.
nf_BA.book Page 493 Friday, January 25, 2008 3:53 PM Practical hints Display messages Display messages ESP Visit workshop Possible cause/result WARNING Possible solution G ESP® has been deactivated due to a malfunction. Cruise control is also switched off as a result. Continue driving, but with even greater care. Have the system checked at an authorized Sprinter Dealer as soon as possible. Vehicle stability is no longer automatically controlled in good time. Engine power output may be reduced.
nf_BA.book Page 494 Friday, January 25, 2008 3:53 PM Practical hints Display messages Display messages 5 494 Possible cause/result Possible solution Tire pres. Adjust pres. The pressure is too low in one or more tires. Tire pres. monitor inoperative Tire pres. displayed after driving several minutes The TPMS is malfunctioning. Check and correct tire inflation pressure as required. Have the TPMS checked at an authorized Sprinter Dealer. The tire inflation pressure is being checked.
nf_BA.book Page 495 Friday, January 25, 2008 3:53 PM Practical hints Display messages Display messages Tire pres. monitor currently unavailable Tire pres. monitor inoperative No wheel sensors Wheel sens. missing Possible cause/result Possible solution The TPMS or Advanced TPMS* is unable to moni- As soon as the causes of the malfunction tor the tire pressure due to have been removed, the TPMS automatically becomes active again after a few min a nearby radio interference source.
nf_BA.book Page 496 Friday, January 25, 2008 3:53 PM Practical hints Display messages Display messages SRS Possible cause/result Possible solution Slid. sunroof open You have the removed the key from the ignition lock and the sliding sunroof is still open. Cruise cont. Visit workshop Cruise control is malfunctioning. If necessary, close the sliding sunroof using the switch in the overhead control panel ( page 245). Have cruise control checked at an authorized Sprinter Dealer.
nf_BA.book Page 497 Friday, January 25, 2008 3:53 PM Practical hints Display messages Symbol messages Display symbol Display message Possible cause/result Possible solution # The battery is not being charged. Possible causes: malfunctioning alternator torn poly-V-belt Stop immediately and check the poly-Vbelt. 2 Battery/ Alternator Visit workshop Brake wear Visit workshop WARNING G The brake pads/linings have reached their wear limit. If it is torn: Do not drive any further.
nf_BA.book Page 498 Friday, January 25, 2008 3:53 PM Practical hints Display messages Display symbol Display message Possible cause/result 6 WARNING Brake force distribution Possible solution G EBV has been deactivated due to undervoltage. The battery may not be being charged. Stop your vehicle as soon as it is safe to do so. Do not drive any further. Consult an authorized Sprinter Dealer. The rear wheels could lock up sooner than expected when you apply the brakes.
nf_BA.book Page 499 Friday, January 25, 2008 3:53 PM Practical hints Display messages Display symbol Display message Possible cause/result 6 WARNING Brake force distribution Visit workshop Possible solution G EBV has malfunctioned. The rear wheels could lock up sooner than expected when you apply the brakes. 7 Parking brake Release brake You are driving with the handbrake applied. Stop your vehicle as soon as it is safe to do so. Do not drive any further.
nf_BA.book Page 500 Friday, January 25, 2008 3:53 PM Practical hints Display messages Display symbol Display message Possible cause/result k WARNING Visit workshop Possible solution G Continue driving, but with even greater care. ASR has been deactivated due to a malfunc- Have the system checked at an authorized tion. Cruise control is also switched off as a Sprinter Dealer as soon as possible. result. The engine power output may then be lower.
nf_BA.book Page 501 Friday, January 25, 2008 3:53 PM Practical hints Display messages Display symbol Display message Possible cause/result Possible solution k ASR as well as BAS have been switched off due to undervoltage. Continue driving, but with even greater care. The battery may not be being charged. Have the system checked at an authorized Sprinter Dealer as soon as possible. unavailable The brake system is still available with the normal braking effect.
nf_BA.book Page 502 Friday, January 25, 2008 3:53 PM Practical hints Display messages Display symbol Display message Possible cause/result Possible solution Z The coolant temperature is too high. Do not drive any further. Coolant Stop, turn engine off Consult an authorized Sprinter Dealer. If the vehicle is switched off after being subjected to extreme loads (for example driving in mountainous terrain, trailer towing, etc.
nf_BA.book Page 503 Friday, January 25, 2008 3:53 PM Practical hints Display messages Display symbol Display message Possible cause/result Possible solution . Low beam left The left-hand low-beam headlamp is malfunctioning. Change the bulb as soon as possible. Low beam right The right-hand low-beam headlamp is malfunctioning. Change the bulb as soon as possible. Turn signal left The left-hand turn signal is malfunctioning. Change the bulb as soon as possible.
nf_BA.book Page 504 Friday, January 25, 2008 3:53 PM Practical hints Display messages Display symbol Display message Possible cause/result Possible solution . High beam right The right-hand high-beam headlamp is malfunctioning. Change the bulb as soon as possible. License plate lamp A license plate lamp is malfunctioning. Change the bulb as soon as possible. Foglamp front left The left-hand front foglamp is malfunctioning. Change the bulb as soon as possible.
nf_BA.book Page 505 Friday, January 25, 2008 3:53 PM Practical hints Display messages Display symbol Display message Possible cause/result Possible solution . Tail lamp left The left-hand tail lamp is malfunctioning. Change the bulb as soon as possible. Tail lamp right The right-hand tail lamp is malfunctioning. Change the bulb as soon as possible. Perim. lamps A perimeter lamp is malfunctioning. Change the bulb as soon as possible. Additional ind.
nf_BA.book Page 506 Friday, January 25, 2008 3:53 PM Practical hints Display messages Display symbol Display message . I 5 506 Possible cause/result Possible solution Trailer tail lamp A trailer tail lamp or license plate lamp is malfunctioning. Change the bulb as soon as possible. Switch off lights You have forgotten to switch off the lights when leaving the vehicle. Switch off the lights. Remove the key. Lights on automatic. Remove key Automatic headlamp mode is active ( page 132).
nf_BA.book Page 507 Friday, January 25, 2008 3:53 PM Practical hints Display messages Display symbol Display message Possible cause/result C Warning Tire defect One or more tires are deflating. Check tire(s) The tire pressure in one or more tires is already below the minimum value. Possible solution Carefully bring the vehicle to a halt, avoiding abrupt steering and braking maneuvers. The respective tire is shown in the multifunction display. If necessary, change the wheel.
nf_BA.book Page 508 Friday, January 25, 2008 3:53 PM Practical hints Display messages Display symbol Display message Possible cause/result Possible solution N There is insufficient or no oil in the engine. There is a risk of engine damage. Stop your vehicle as soon as it is safe to do so. Engine oil level Stop, turn engine off Switch off the engine. Check the engine oil level using the dipstick ( page 326).
nf_BA.book Page 509 Friday, January 25, 2008 3:53 PM Practical hints Display messages Display symbol Display message Possible cause/result Possible solution N Engine oil level Check oil level The engine oil level has dropped to a critical level. Check the engine oil level ( page 323) and add oil as necessary. Engine oil Add 1.0 quart (Canada: liter) The engine oil level is too low. Have the engine checked for possible leaks if you are having to add engine oil more frequently than normal.
nf_BA.book Page 510 Friday, January 25, 2008 3:53 PM Practical hints Display messages Display symbol Display message Possible cause/result Possible solution N You have added too much engine oil. There is a risk of damage to the engine or the catalytic converter. Check the engine oil level and have any excess oil siphoned off at the nearest refueling station ( page 328). Engine oil level Reduce oil level The engine or the catalytic converter could be damaged.
nf_BA.book Page 511 Friday, January 25, 2008 3:53 PM Practical hints Display messages Display symbol Display message Possible cause/result Possible solution W Reserve fuel Drive to a gas station The fuel level has fallen into the reserve range. Refuel at the nearest gas station ( page 316). Tank open Check filler cap The fuel filler cap is not closed. Close the fuel filler cap. A clicking sound indicates that the fuel filler cap is closed.
nf_BA.book Page 512 Friday, January 25, 2008 3:53 PM Practical hints Display messages Display symbol Display message Possible cause/result Possible solution / Water in Fuel Visit workshop The water that has collected in the water separator has reached the maximum level. Drain the water separator ( page 542). Washer fluid Check level The washer fluid level has dropped to approximately 1/3 of the reservoir capacity.
nf_BA.book Page 513 Friday, January 25, 2008 3:53 PM Practical hints Where will I find...? Warning triangle* The warning triangles are behind the driver's seat. Road hazard lamp* The road hazard lamp is located in the storage compartment in the driver’s door. Turn the two quick-release locks counter-clockwise to unlock 2 and fold out the cover N72.10-2148-31 3 Road hazard lamp 1 Warning triangles Remove warning triangles 1 from the brackets upward.
nf_BA.book Page 514 Friday, January 25, 2008 3:53 PM Practical hints Where will I find...? Fire extinguisher* The fire extinguisher is secured to the front of the passenger’s seat base. Pull tabs 2 upward. Take fire extinguisher 1 out of the bracket. First-aid kit* The first-aid kit is located in the storage compartment in the passenger’s door. i Read the instructions on the fire extinguisher carefully and familiarize yourself with its operation.
nf_BA.book Page 515 Friday, January 25, 2008 3:53 PM Practical hints Where will I find...? Jack and vehicle tool kit The jack and the vehicle tool kit are located under the hatch in the passenger’s footwell. Warning G To avoid the risk of causing serious or fatal injury, or damage to the vehicle, please bear the following points in mind: The jack is designed only to raise the vehicle for a short time, for example while a wheel is being changed.
nf_BA.book Page 516 Friday, January 25, 2008 3:53 PM Practical hints Where will I find...? Warning (Continued) G Do not crawl under the vehicle if it is only supported by the jack. Make sure that no persons are present in the vehicle when raising the vehicle. Do not start the engine while the vehicle is raised. Make sure that the distance between the underside of the tires and the ground does not exceed 30 mm. 5 If work is to be carried out under the vehicle, the vehicle must be placed on stands.
nf_BA.book Page 517 Friday, January 25, 2008 3:53 PM Practical hints Where will I find...? Remove jack 4 upward out of the retainer. i Place the jack into the retainer as shown when storing it back into place. Make sure that the jack’s retaining strap is hooked in and tensioned.
nf_BA.book Page 518 Friday, January 25, 2008 3:53 PM Practical hints Where will I find...? Open the rear doors ( page 100). Slide the pump lever for the jack into sleeve 4 on spare wheel bracket 5. Insert a screwdriver into recesses 2 and pry off covers 1. Raise spare wheel bracket 5 using the pump lever and release right securing hook 3. Using the wheel wrench from the vehicle tool kit ( page 515), now unscrew the visible bolts approximately 20 turns counterclockwise.
nf_BA.book Page 519 Friday, January 25, 2008 3:53 PM Practical hints Where will I find...? Warning G Chassis Take care not to trap your fingers when you lift out the spare wheel. Use the pump lever to raise the spare wheel beyond the rear end of the spare wheel bracket. Carefully remove the spare wheel from the bracket.
nf_BA.book Page 520 Friday, January 25, 2008 3:53 PM Practical hints Where will I find...? Loosen thumb nuts 3 by hand and remove. Loosen fixing nuts 2 to the thread end. Raise spare wheel bracket 4 slightly and pull the pump lever out of sleeve. Slide th pump lever for the jack into sleeve on the right-hand side of the spare wheel bracket 4. 5 Slowly lower spare wheel bracket 4 to the ground. 520 Warning G Take care not to trap your fingers when you lift out the spare wheel.
nf_BA.book Page 521 Friday, January 25, 2008 3:53 PM Practical hints Where will I find...? Premium tire sealant* The Premium tire sealant is located in the storage compartment in the righthand doorway. To open: press both latching springs 1 down and remove the cover. To close: attach the cover at the bottom and fold it closed. Press both latching springs 1 up until they engage.
nf_BA.book Page 522 Friday, January 25, 2008 3:53 PM Practical hints Where will I find...? Panel van 1 Retaining band 2 Retainer Pull support cable 1 slightly downward and pull it out of retainer 2. Chassis The wheel chock is on the left-hand side behind the rear axle. Pull out the wheel chock. !CAUTION When storing it away, make sure that the chock is secured in the retainer by the retainer springs.
nf_BA.book Page 523 Friday, January 25, 2008 3:53 PM Practical hints Where will I find...? N77.20-2040-31 N77.20-2041-31 Open or close the sliding sunroof by turning it in the appropriate direction. Pull out emergency operation key 4 and place it in the vehicle document wallet. Clip cover cap 2 back on. 1 Trim 2 Cover cap 3 Opening 4 Emergency operation key Remove cover cap 2 from trim 1. Take emergency operation key 4 from the vehicle document wallet in the glove box.
nf_BA.book Page 524 Friday, January 25, 2008 3:53 PM Practical hints Where will I find...? Releasing the parking lock manually In the event of a malfunction, it is possible to manually release the selector lever from the lock in parking position P, for example to have the vehicle towed away. Remove cover cap 1. N27.60-2089-31 2 Pencil N27.60-2088-31 5 1 Cover cap 524 Insert a pencil 2 or similar implement into the opening.
nf_BA.book Page 525 Friday, January 25, 2008 3:53 PM Practical hints Changing bulbs Changing bulbs Bulbs and lights are an important aspect of vehicle safety. For this reason, make sure that all bulbs are in working order at all times. Before changing bulbs Switch off the lights to avoid a short circuit. Only touch new bulbs with a clean lint-free cloth or something similar. Do not work with wet or greasy fingers. Only fit 12 V bulbs of the same type as before and of the correct wattage.
nf_BA.
nf_BA.book Page 527 Friday, January 25, 2008 3:53 PM Practical hints Changing bulbs Bi-xenon headlamps* Warning (Continued) Warning G Xenon bulbs carry a high voltage. You could receive a serious or fatal electric shock if you touch the electrical contacts on the xenon bulbs. Do not remove housing cover 2 ( page 527) if the headlamps are xenon headlamps. Continued G High-beam headlamps, low-beam headlamps Do not change xenon bulbs yourself.
nf_BA.book Page 528 Friday, January 25, 2008 3:53 PM Practical hints Changing bulbs Press catches 1 down. Swing housing cover 2 in the direction of the arrow and remove it. Pull the connector off the bulb holder. Unclip the retainer spring and remove the bulb. Insert the new bulb such that the base locates in the recess of the bulb holder. Pull first the inner and then the outer catch 1 upward until it audibly engages in place.
nf_BA.book Page 529 Friday, January 25, 2008 3:53 PM Practical hints Changing bulbs Turn bulb holder 1 and the bulb counterclockwise and remove the holder. Parking lamps/side marker Press the new bulb into the bulb holder. Press down on the bulb, turn it counterclockwise and remove it from bulb holder 1. Insert the bulb holder with bulb into the reflector. Replace cap 1 and turn it clockwise to the stop. Press the new bulb into bulb holder 1 and screw it in clockwise.
nf_BA.book Page 530 Friday, January 25, 2008 3:53 PM Practical hints Changing bulbs Rear bulbs 5 N82.
nf_BA.book Page 531 Friday, January 25, 2008 3:53 PM Practical hints Changing bulbs Bulb Model 8 Perimeter lamp/side R 5 W marker 9 Turn signal PY 21 W a Brake lamp P 21 W b Reverse lamp P 21 W c Rear foglamp (driver’s side) P 21 W d Tail lamp R5W e License plate lamp R5W Changing the rear bulbs (van/crewbus) Switch off the lighting. Rear lamp units Undo screws 1 and remove the rear lamp unit in the direction of the arrow. Remove the connector.
nf_BA.book Page 532 Friday, January 25, 2008 3:53 PM Practical hints Changing bulbs 2 Retaining lugs 3 Brake lamp 4 Side marker, Standing lamp (Canada only), tail lamp 5 Reverse lamp 6 Turn signal lamp 7 Rear foglamp (driver’s side) Release retaining lugs 2 and remove the bulb holder from the rear lamp unit. Press down on the bulb, turn it counterclockwise and remove it from the holder. 5 532 Press the new bulb into the bulb holder and screw it in clockwise.
nf_BA.book Page 533 Friday, January 25, 2008 3:53 PM Practical hints Changing bulbs Changing the rear bulbs (chassis) 6 7 8 9 Tail lamp Rear foglamp (driver’s side) License plate lamp Reverse lamp Switch off the lighting. Changing additional bulbs Switch off the lighting. Identification lamps W 5 W (cab chassis only) Undo screws 1 and remove lens 2. Press the bulb into the bulb holder and screw it out in a counterclockwise direction.
nf_BA.book Page 534 Friday, January 25, 2008 3:53 PM Practical hints Changing bulbs Switch off the lighting. License plate lamp W 5 W Undo screws 1 and remove lamp housing. Pull the bulb out of the bulb holder. Turn the bulb holder 2and remove it together with the bulb. Insert the new bulb. Pull the bulb out of the bulb holder 2. Align lens 1 and clip it in, making sure that it engages. Press the new bulb into the bulb holder 2.
nf_BA.book Page 535 Friday, January 25, 2008 3:53 PM Practical hints Changing bulbs Clearance lamp* W 5 W (cargo and passenger vans only) Undo screw 1 and remove lamp housing 2 in the direction of the arrow. Side marker lamps* W 5 W The lamps are mounted on the side of the vehicle. Turn the bulb holder and remove it together with the bulb. Pull the bulb out of the bulb holder. Press the new bulb into the bulb holder. Screw the bulb holder containing the bulb into the lens.
nf_BA.book Page 536 Friday, January 25, 2008 3:53 PM Practical hints Changing bulbs Insert a screwdriver or similar implement at the side and carefully pry off lens 1 in the direction of the arrow. Identification lamps 12V 4CP (cargo vans only) Turn bulb holder 2 in the direction of the arrow and remove it together with the bulb. Press the new bulb into the bulb holder and screw it in clockwise. Carefully reattach the lamp housing and retighten screw 1. Remove bulb 2 from the bulb holder.
nf_BA.book Page 537 Friday, January 25, 2008 3:53 PM Practical hints Changing bulbs Entry lamp* W 5 W Pry off lamp housing 1. Interior lamp K 18 W Remove cable connector 3. Turn bulb holder 2 in the direction of the arrow and remove it together with the bulb. N82.20-2081-31 Remove bulb 2 from the bulb holder. N82.20-2079-31 Press the new bulb into bulb holder 2.
nf_BA.book Page 538 Friday, January 25, 2008 3:53 PM Practical hints Changing bulbs Switch off the lighting. !CAUTION Press in the latching springs of lamp housing 1 using a suitable tool, for example a screwdriver. Have the interior lamps in the overhead control panel changed at an authorized Sprinter Dealer which has the necessary specialist knowledge and tools to carry out the work required. The manufacturer recommends that you use an authorized Sprinter Dealer for this purpose.
nf_BA.book Page 539 Friday, January 25, 2008 3:53 PM Practical hints Changing the batteries Changing the batteries If the remote control batteries (remote keyless entry) are discharged, you will only be able to lock and unlock the vehicle manually using the key. If the batteries in the auxiliary heating remote control are discharged, you will only be able to switch the auxiliary heating on or off using the auxiliary heating/ heater booster switch inside the vehicle ( page 238).
nf_BA.book Page 540 Friday, January 25, 2008 3:53 PM Practical hints Changing the batteries i Always replace all the batteries at the same time. Suitable batteries are available from an authorized Sprinter Dealer. You can also have the batteries changed there and return used batteries. Remote control (remote keyless entry) You need two CR 2025 3 V cell batteries or equivalent. Do not touch the battery contact surfaces. i 5 When inserting the batteries, make sure that they are clean and lint-free.
nf_BA.book Page 541 Friday, January 25, 2008 3:53 PM Practical hints Changing the batteries Auxiliary heating remote control* You need three Micro/AAA/LR03 batteries or equivalent. Remove battery cover 1 using a suitable implement, for example a key, and put it to one side. Remove old batteries 2. Insert three new batteries 2. Observe the plus and minus signs in the remote control. N83.00-2062-31 Remove the battery and install a new one (note correct polarity; positive terminal up).
nf_BA.book Page 542 Friday, January 25, 2008 3:53 PM Practical hints Fuel system Fuel system Draining the fuel filter On vehicles with a diesel engine, it is necessary to drain the fuel filter if the / indicator lamp lights up. !CAUTION Drain the fuel filter with water separator immediately if the / indicator lamp lights up. The engine could be damaged. 5 Environmental note H The fuel filter with water separator is in the engine compartment.
nf_BA.book Page 543 Friday, January 25, 2008 3:53 PM Practical hints Fuel system Switch off the engine and open the hood ( page 318). Place a suitable container under drain hose 1. Switch on the ignition ( page 111). Unscrew drain plug 2 immediately one turn or until liquid flows out of drain hose 1. Make sure that the liquid flows into the container under drain hose 1. Close drain plug 2 as soon as approximately 0.2 US qt (0.2 l) of liquid has been collected.
nf_BA.book Page 544 Friday, January 25, 2008 3:53 PM Practical hints Fuel system Environmental note H Have the drained liquid disposed of at an authorized Sprinter Dealer. Drain the fuel filter again if the / indicator lamp remains lit. !CAUTION 5 If the / indicator lamp remains lit even after draining for the second time, have the cause checked immediately at an authorized Sprinter Dealer.
nf_BA.book Page 545 Friday, January 25, 2008 3:53 PM Practical hints Replacing the wiper blades Replacing the wiper blades !CAUTION Removing the wiper blades Do not open the hood while the wiper arms are folded away from the windshield. You would damage the hood and the wiper arms. Warning Do not fold the wiper arms onto the windshield without wiper blades being attached. You could scratch the windshield. For your own convenience, have this work carried out at an authorized Sprinter Dealer.
nf_BA.book Page 546 Friday, January 25, 2008 3:53 PM Practical hints Replacing the wiper blades Press two retaining clips 2 together in the direction of the arrow and fold wiper blade 1 away from wiper arm 3. Pull wiper blade 1 up and out of the retainer. Installing the wiper blades Slide wiper blade 1 into the retainer on the wiper arm. Press wiper blade 1 onto wiper arm 3 until you hear retaining clips 2 engage. Fold wiper arm 3 onto the windshield again.
nf_BA.book Page 547 Friday, January 25, 2008 3:53 PM Practical hints Flat tire Flat tire The vehicle is either equipped with a spare wheel or the Premium tire sealant*. Warning The spare wheel is located under the rear end of the vehicle if the vehicle is not equipped with Premium tire sealant* ( page 517). Defective or worn tires, and tire pressures that are either too high or too low, can cause significant changes in the vehicle’s handling and braking characteristics.
nf_BA.book Page 548 Friday, January 25, 2008 3:53 PM Practical hints Flat tire Preparing the vehicle Park the vehicle as far away as possible from traffic and on a level, firm, and non-slip surface. Warning Warning (Continued) G Apply the handbrake. To avoid the risk of causing serious or fatal injury, or damage to the vehicle, please bear the following points in mind: Engage first gear or reverse gear or move the selector lever to position P.
nf_BA.book Page 549 Friday, January 25, 2008 3:53 PM Practical hints Flat tire Preparing the vehicle On a level road: Prepare the vehicle as described ( page 548). Place the chocks in front of and behind the wheel diagonally opposite to the wheel that is to be changed. Prevent the vehicle from rolling away using chocks or similar. Warning G The vehicle could slip off the jack on uphill and downhill gradients.
nf_BA.book Page 550 Friday, January 25, 2008 3:53 PM Practical hints Flat tire Hydraulic jack Assemble the three-part pump lever for the jack. To do this, turn the flattened section on the pump lever clockwise to the stop. i P58.10-2053-31 Never turn pressure release screw 1 more than 1 or 2 full turns. Hydraulic fluid could otherwise escape. Insert the pump lever into the recess on the jack and secure it by turning it clockwise. 5 1 Pressure release screw Close pressure release screw 1.
nf_BA.book Page 551 Friday, January 25, 2008 3:53 PM Practical hints Flat tire Jacking point at the front axle Jacking points at the rear axle The vehicle jacking point is located under the longitudinal member in front of the front axle. The vehicle jacking point is located under the longitudinal member in front of the rear axle. N40.10-2260-31 N40.10-2161-31 Vehicle model type 3500 !CAUTION Do not apply the jack to the leaf spring or the differential housing.
nf_BA.book Page 552 Friday, January 25, 2008 3:53 PM Practical hints Flat tire Removing a wheel Unscrew the wheel bolts or wheel nuts. !CAUTION Do not place the wheel bolts or the wheel nuts in sand or dirt. The bolt and wheel hub threads could otherwise be damaged. For wheels with wheel nuts remove the wheel nut cover. 5 Remove the wheel. Mounting the new wheel Warning (Continued) Warning G Replace the wheel bolts and wheel nuts if they are damaged or have become rusty.
nf_BA.book Page 553 Friday, January 25, 2008 3:53 PM Practical hints Flat tire Push the wheel onto the wheel hub and press it on. !CAUTION If your vehicle is equipped with the tire pressure monitor, each wheel has an electronic component. Tire mounting tools should not be applied in the area of the valve, as this could damage the electronic components. Have the tires changed only at an authorized Sprinter Dealer.
nf_BA.book Page 554 Friday, January 25, 2008 3:53 PM Practical hints Flat tire For wheels with wheel nuts: Tightening torque pattern Center the wheel nut cover over the wheel and push it onto the wheel. Screw on the wheel nuts and tighten them finger tight. !CAUTION i Screw on the three wheel nuts that hold the wheel nut cover first. 5 Lowering the vehicle 1 – 6 Wheel bolts Slowly open the jack’s pressure release screw one turn using the pump lever ( page 550) and lower the vehicle slowly.
nf_BA.book Page 555 Friday, January 25, 2008 3:53 PM Practical hints Flat tire Vehicles with wheel caps: Make sure that the opening in the wheel cap is positioned over the tire vent. Vehicles with center caps: Make sure that the retaining lugs of the hub cap are positioned over the bolts. i Give the middle of the center cap a knock to engage it on the wheel. Store the jack and the remaining vehicle tools. Place the defective wheel in the spare wheel bracket after changing the wheel ( page 517).
nf_BA.book Page 556 Friday, January 25, 2008 3:53 PM Practical hints Flat tire G Warning (Continued) Check the tire pressure and correct it if necessary Have the wheel bolts or wheel nuts retightened after 30 miles (50 km) to a torque of: 177 lb-ft (240 Nm) (steel wheel)/ 133 lbft (180 Nm) (light-alloy wheel) for wheel bolts or 5 133 lb-ft (180 Nm) for wheel nuts.
nf_BA.book Page 557 Friday, January 25, 2008 3:53 PM Practical hints Flat tire Using Premium tire sealant* You can use the Premium tire sealant to seal small punctures, particularly those in the tire tread. Tire sealants can be used at outside temperatures down to – 22 °F (–30 °C). Warning G Your safety is at particular risk and the tire sealant is unable to repair a tire in the following situations: if there are cuts or punctures in the tire greater than 0.
nf_BA.book Page 558 Friday, January 25, 2008 3:53 PM Practical hints Flat tire !CAUTION Only connect the electric air pump to the 12 V socket ( page 297) on the center console (12 V, 25 A, 300 watts). You could otherwise damage the vehicle electrical system. 5 Try to park the vehicle in such a way that the tire puncture is close to the ground. If the tire puncture cannot be seen, park the vehicle in such a way that the tire valve of the flat tire is in horizontal alignment with the axle.
nf_BA.book Page 559 Friday, January 25, 2008 3:53 PM Practical hints Flat tire Warning (Continued) G Immediately change out of clothing that has been in contact with tire sealant. If an allergic reaction occurs, consult a doctor immediately. i Electric air pump The tire sealant is water soluble. If tire sealant escapes, you can wash it away with water.
nf_BA.book Page 560 Friday, January 25, 2008 3:53 PM Practical hints Flat tire Press angle bracket 2 ( page 559) on hose 3 of the electric air pump all the way onto valve 7 of tire sealant bottle 8 and clamp it in place. 5 Tire sealant bottle for single tires Tire sealant bottle for twin tires 7 Valve 8 Tire sealant bottle with hook, hose and valve core extractor 7 Valve 8 Tire sealant bottle with hook, hose and angle brackets Shake tire sealant bottle 8.
nf_BA.book Page 561 Friday, January 25, 2008 3:53 PM Practical hints Flat tire Single tire 9 Hook a Knob b Lever c Valve core extractor d Tire valve Pull knob a out of valve core extractor c as far as the stop. Turn knob a counterclockwise until the valve core is unscrewed. Unscrew and remove the valve cap from tire valve d on the flat tire. Pull knob a out of valve core extractor c as far as the stop. Hook the tire sealant bottle into the upper vent hole in the wheel using hook 9.
nf_BA.book Page 562 Friday, January 25, 2008 3:53 PM Practical hints Flat tire !CAUTION Do not connect the electric air pump connector to the cigarette lighter socket or another 12 V socket. These are not designed for operating the electric air pump. Start the engine ( page 186). Press I on electric air pump switch 1. 5 The electric air pump is switched on. The tire sealant is then pumped into the tire and the tire pressure is increased.
nf_BA.book Page 563 Friday, January 25, 2008 3:53 PM Practical hints Flat tire Press lever b and remove valve core extractor c from tire valve d. Twin tires, inner wheel Screw the valve cap onto tire valve d. Screw valve core extractor a clockwise all the way onto valve extension 9. Continue to screw valve core extractor a about half a rotation to loosen the valve extension. After filling with tire sealant ( page 570).
nf_BA.book Page 564 Friday, January 25, 2008 3:53 PM Practical hints Flat tire Screw valve core extractor a clockwise onto tire valve e. Press knob c into the valve core of tire valve e, turning it gently as you do so, until the shaft of valve core extractor a engages. Turn knob c counterclockwise until the valve core is unscrewed. 5 a b c d e Valve core extractor Hook Knob Angle bracket Tire valve Pull knob c out of valve core extractor a as far as the stop.
nf_BA.book Page 565 Friday, January 25, 2008 3:53 PM Practical hints Flat tire Connect connector 6 to the 12 V socket (12 V, 25 A, 300 watts) on the center console ( page 297). !CAUTION Do not connect the electric air pump connector to the cigarette lighter socket or another 12 V socket. These are not designed for operating the electric air pump. Start the engine ( page 186). Press I on electric air pump switch 1. The electric air pump is switched on.
nf_BA.book Page 566 Friday, January 25, 2008 3:53 PM Practical hints Flat tire Turn knob c clockwise until the valve core is firmly screwed into tire valve e. i Do not unscrew the valve core extractor from the tire valve while the valve core is unscrewed from the tire valve. Tire sealant could otherwise escape onto your hands. 5 Unscrew valve core extractor a counterclockwise and remove it from tire valve e . Screw valve extension 9 onto tire valve e and tighten.
nf_BA.book Page 567 Friday, January 25, 2008 3:53 PM Practical hints Flat tire Use one hand to hold handle 9 on valve tool firmly and use the other hand to unscrew and remove the valve core from the valve tool using turning workpiece a. Remove the valve tool carefully through the opening in such a way that the valve core remains engaged in the valve tool. 9 Handle a Turning workpiece b Tire valve c Angle bracket Unscrew and remove the valve cap from tire valve d on the flat tire.
nf_BA.book Page 568 Friday, January 25, 2008 3:53 PM Practical hints Flat tire Hook tire sealant valve 8 into the upper vent hole in the wheel using hook d. Press angle bracket c on hose of tire sealant bottle 8 ( page 560) to the stop on tire valve b and clamp it into place. c Angle bracket d Hook 5 568 Make sure that the pressure release screw on pressure gauge 5 is closed. Connect connector 6 to the 12 V socket (12 V, 25 A, 300 watts) on the center console ( page 297).
nf_BA.book Page 569 Friday, January 25, 2008 3:53 PM Practical hints Flat tire Allow the electric air pump to run until tire sealant bottle 8 is completely empty. Press 0 on electric air pump switch 1 after about 15 seconds. Unscrew angle bracket c from tire valve b and remove it. Screw in the valve core with the valve tool again and take out the valve tool through the opening. !CAUTION Do not run the electric air pump for more than 20 minutes without a break, otherwise it may overheat.
nf_BA.book Page 570 Friday, January 25, 2008 3:53 PM Practical hints Flat tire After filling with tire sealant Turn the pressure release screw on pressure gauge 5 counterclockwise and bleed the system. 5 Unscrew and remove angle bracket 2 from valve 7 on tire sealant bottle 8 and screw the valve cap onto the valve. Turn the key to position 0 in the ignition lock ( page 111). Warning Pull the electric air pump connector out of the 12 V socket.
nf_BA.book Page 571 Friday, January 25, 2008 3:53 PM Practical hints Flat tire Correct the tire pressure accordingly if it does not correspond to the recommended tire pressure ( page 361). Increasing the tire pressure Switch on the electric air pump. Reducing the tire pressure Open the pressure release screw on pressure gauge 5. Drive to the nearest workshop and have the tire repaired or replaced. Clean the valve core extractor using clean water.
nf_BA.book Page 572 Friday, January 25, 2008 3:53 PM Practical hints Flat tire Environmental note H Have the used Premium tire sealant disposed of at an authorized Sprinter Dealer. !CAUTION Have the tire sealant bottle replaced every 8 years at an authorized Sprinter Dealer.
nf_BA.book Page 573 Friday, January 25, 2008 3:53 PM Practical hints Battery Battery Your vehicle may be equipped with two batteries, depending on the equipment version: Starter battery in the battery recess in the driver’s footwell Auxiliary battery* in the engine compartment i The auxiliary battery* in the engine compartment is not suitable for jump-starting operations.
nf_BA.book Page 574 Friday, January 25, 2008 3:53 PM Practical hints Battery Have the batteries removed at an authorized Sprinter Dealer which has the necessary specialist knowledge and tools to carry out the work required. The manufacturer recommends that you use an authorized Sprinter Dealer for this purpose. Disconnecting the battery Warning Warning (Continued) G There is a risk of a short circuit if the positive terminal of the connected battery comes into contact with vehicle parts.
nf_BA.book Page 575 Friday, January 25, 2008 3:53 PM Practical hints Battery !CAUTION Disconnecting the starter battery Switch off the engine and take the key out of the ignition lock before you loosen or disconnect the terminal clamps. You may otherwise destroy electronic components such as the alternator. The starter battery is in the battery recess in the driver’s footwell. Always disconnect the starter battery in the battery recess in the driver’s footwell first.
nf_BA.book Page 576 Friday, January 25, 2008 3:53 PM Practical hints Battery To install: place floor covering 1 into the driver’s footwell. G Push floor covering 1 under the plate metal bracket of the accelerator pedal and align it with the driver’s seat base and the doorway The movement of the pedals must not be obstructed. The vehicle’s operating and road safety are otherwise jeopardized. Make sure the floor covering does not obstruct the accelerator’s range of movement.
nf_BA.book Page 577 Friday, January 25, 2008 3:53 PM Practical hints Battery Remove cover 1 upward. Loosen the negative terminal of the battery first and remove it so that the negative terminal cannot come into contact with the pole terminal. Disconnecting the auxiliary battery* Open the hood ( page 318). Remove the cover from the positive terminal. Loosen the positive terminal and fold the positive terminal and the prefuse box up to the side.
nf_BA.book Page 578 Friday, January 25, 2008 3:53 PM Practical hints Battery Loosen the negative terminal of the battery first and remove it so that the negative terminal cannot come into contact with the pole terminal. Remove the cover from the positive terminal. Removing the battery Starter battery Pull vent hose with connection angle 2 from connection 1 of the gas release cover. Disconnect the battery ( page 577). Loosen the positive terminal and remove it.
nf_BA.book Page 579 Friday, January 25, 2008 3:53 PM Practical hints Battery Auxiliary battery* in the engine compartment Disconnect the battery ( page 577). Recharge the removed battery. Observe the notes in the operating instructions for your battery charger. Unscrew the bolts preventing the battery from moving around in the engine compartment. Reinstall the battery in the reverse order. Remove the battery retainer and take out the battery.
nf_BA.book Page 580 Friday, January 25, 2008 3:53 PM Practical hints Battery Warning G Only charge the battery in well-ventilated areas. As the battery is being charged, gases can escape and generate minor explosions, which can injure you and others and may cause damage to the paintwork or permit acid corrosion on the vehicle. 5 During the charge procedure, there is a risk of acid burns due to gases escaping from the battery. Do not, therefore, lean over the battery while it is being recharged.
nf_BA.book Page 581 Friday, January 25, 2008 3:53 PM Practical hints Jump-starting Jump-starting If the starter battery in the battery recess in the driver’s footwell is discharged, the engine can be jump-started from another vehicle using jump leads. For this purpose, the vehicle is equipped with a jump-starting connection point. i The auxiliary battery* in the engine compartment is not suitable for jump-starting operations.
nf_BA.book Page 582 Friday, January 25, 2008 3:53 PM Practical hints Jump-starting Make sure that the two vehicles do not touch. Connect positive terminal of donor battery 2 to jump-starting connection point 1 with the jumper cable. Start with the donor battery. Apply the handbrake or move the selector lever to position P. Switch off all electrical consumers. Switch on the battery isolating switch* if necessary ( page 338). Remove the key from the ignition lock.
nf_BA.book Page 583 Friday, January 25, 2008 3:53 PM Practical hints Jump-starting i Do not connect the jumper cable to the auxiliary battery* in the engine compartment. This is not suitable for jump-starting operations. Run the other vehicle’s engine at idling speed.
nf_BA.book Page 584 Friday, January 25, 2008 3:53 PM Practical hints Jump-starting Tow-starting !CAUTION Your vehicle is equipped with an automatic transmission. Do not towstart your vehicle. Warning G When tow-starting another vehicle, its weight should not be greater than the permissible gross weight of your vehicle. Use a rigid towing bar and secure this only to the front towing eye ( page 585).
nf_BA.book Page 585 Friday, January 25, 2008 3:53 PM Practical hints Towing Towing Warning G Tow the vehicle using a rigid towing bar if: the engine is not running, there is a malfunction in the power supply or the vehicle’s electrical system. There is no power assistance for the steering and braking when the engine is not running. You must then use significantly greater force to steer the vehicle and brake.
nf_BA.book Page 586 Friday, January 25, 2008 3:53 PM Practical hints Towing Installing the towing eye Removing the towing eye Press bottom of cover 1 in the direction of the arrow and remove it. Remove the wheel wrench from the vehicle tool kit. You will see the fixture for the towing eye. Take the towing eye and the wheel wrench from the vehicle tool kit ( page 515). 1 Cover 5 586 Insert the wheel wrench handle into the towing eye and turn the wrench counterclockwise.
nf_BA.book Page 587 Friday, January 25, 2008 3:53 PM Practical hints Towing i For a distance greater than 30 miles (50 km), remove the propeller shafts to the driven axles. Deactivate the automatic locking while driving function when towing . You could otherwise become locked Towing out a vehicle that is stuck out when pushing or towing the vehiTake great care when attempting to tow cle. the vehicle free if its drive wheels have become embedded in loose earth or Switch on the ignition ( page 111).
nf_BA.book Page 588 Friday, January 25, 2008 3:53 PM Practical hints Towing With front axle damage Turn the key to position 1 in the ignition lock( page 111). !CAUTION The vehicle must not be towed with its front wheels raised and with the key in position 2 in the ignition lock. Active brake intervention by ESP® or ASR could otherwise lock the wheels and damage the brake system.
nf_BA.book Page 589 Friday, January 25, 2008 3:53 PM Practical hints Fuses Fuses Warning G Only use fuses of the amperage recommended by the manufacturer. Any authorized Sprinter Dealer will be happy to advise you. Do not attempt to repair or bridge blown fuses. Have the cause determined and rectified at a qualified specialist workshop, e.g. an authorized Sprinter Dealer. The fuses and relays for the standard equipment are in the main fuse box in the footwell on the left-hand side of the vehicle.
nf_BA.book Page 590 Friday, January 25, 2008 3:53 PM Practical hints Fuses To open: release 1 the quick-release lock and remove the cover. To close: attach the cover at the bottom and fold it closed. N54.15-2148-31 1 Unlocked 2 Locked 5 590 The cover must engage. Lock 2 the quick-release lock.
nf_BA.
nf_BA.book Page 592 Friday, January 25, 2008 3:53 PM Practical hints Fuses No. Consumer No. Consumer No.
nf_BA.book Page 593 Friday, January 25, 2008 3:53 PM Practical hints Fuses Fuse block F55/1 No. Consumer Fuse block F55/2 Amp. No. Consumer Amp.
nf_BA.book Page 594 Friday, January 25, 2008 3:53 PM Practical hints Fuses Preliminary fuse box in the battery recess in the driver’s footwell F59 No. 1 2 3 4 5 5 594 Consumer Amp.
nf_BA.
nf_BA.book Page 596 Friday, January 25, 2008 3:53 PM Practical hints Fuse Box in the Driver’s Seat Fuse Box in the Driver’s Seat Fuses No. 1 2 3 4 5 5 596 Consumer Mirror adjustment*/rear window heating* Rear window wiper* Rear view camera*/telephone*/pre-wiring mounting slot (roof)* Operating speed governor (ADR)*/PTO*/trailer connection unit AAG* Terminal 87 electronic transmission control ETC, control unit/automatic transmission, control and switch unit Amp. 5A 30 A 5A No.
nf_BA.book Page 597 Friday, January 25, 2008 3:53 PM Practical hints Fuse Box in the Driver’s Seat No. 23 24 25 26 Consumer Amp. 12V socket* rear left, load/ 15 A passenger compartment 12V socket, driver’s seat 15 A base 12V socket rear right, load/ 15 A passenger compartment Auxiliary heating* 25 A No. 27 28 29 30 31 Consumer Amp.
nf_BA.
nf_BA.book Page 599 Friday, January 25, 2008 3:53 PM *Technical data *Technical data Genuine Sprinter Vehicle parts........... 600 Vehicle electronics........... 602 Service products and capacities........... 604 Rims and tires........... 623 Tire inflation pressure........... 626 Lashing points and carrier systems........... 629 Vehicle identification labels...........
nf_BA.book Page 600 Friday, January 25, 2008 3:53 PM *Technical data Genuine Sprinter Vehicle parts Genuine Sprinter Vehicle parts The “Technical data” section contains important technical data regarding your vehicle. You will find other vehicle-specific and equipment-dependent technical data, such as: engine power output data speeds vehicle dimensions vehicle weights in your vehicle documents. 6 600 Make sure that spare parts are suitable for your vehicle.
nf_BA.book Page 601 Friday, January 25, 2008 3:53 PM *Technical data Genuine Sprinter Vehicle parts Genuine Sprinter vehicle parts are subjected to the most stringent quality inspections and will ensure that the vehicle is maintained at a high level of operating efficiency and safety, and that it maintains its value. Each part has been specifically designed and manufactured or selected and approved for use in Sprinter vehicles.
nf_BA.book Page 602 Friday, January 25, 2008 3:53 PM *Technical data Vehicle electronics Vehicle electronics Tampering with the engine electronics ! Work on the engine electronics and all associated parts such as control units, sensors and connector leads should only be performed at an authorized Sprinter Dealer. Vehicle parts could otherwise wear more quickly and the vehicle’s warranty or general operating permit could be invalidated.
nf_BA.book Page 603 Friday, January 25, 2008 3:53 PM *Technical data Vehicle electronics You may retrofit telephones and twoway radios provided that the maximum transmission outputs listed below are not exceeded. Always have this type of equipment professionally installed with an exterior antenna which has been installed in such a way as to be reflectionfree. .
nf_BA.book Page 604 Friday, January 25, 2008 3:53 PM *Technical data Service products and capacities Service products and capacities 6 Service products are: fuels lubricants (e.g. engine oils, transmission oils, hydraulic fluids, greases) antifreeze additives, coolant brake fluid formation about approved service products is available from all authorized Sprinter Dealers. Service products are tested for suitability in our assemblies.
nf_BA.book Page 605 Friday, January 25, 2008 3:53 PM *Technical data Service products and capacities Warning G !CAUTION Damage caused by the use of non-approved service products is not covered by the Sprinter vehicle warranty.
nf_BA.book Page 606 Friday, January 25, 2008 3:53 PM *Technical data Service products and capacities Warning (Continued) G H Change out of clothing soiled with service products immediately to avoid the risk of fire and other injuries. Dispose of service products in an environmentally responsible manner. Fire, naked flames and smoking are therefore prohibited when handling service products due to their highly flammable nature. Engine oils Keep service products out of the reach of children.
nf_BA.book Page 607 Friday, January 25, 2008 3:53 PM *Technical data Service products and capacities Valid Mercedes-Benz oil specification sheets: Engine MB sheet Gasoline M272 229.3, 229.31 229.5, 229.51 Diesel OM642 228.51, 229.31, 229.51 Always refer to the following viscosity chart for the proper viscosity grade based on ambient temperature. Select oil viscosity according to the lowest air temperature expected before the next oil change.
nf_BA.book Page 608 Friday, January 25, 2008 3:53 PM *Technical data Service products and capacities The following oils have been determined to meet the Chrysler Vans LLC requirements as shown below: 6 The following oils have been determined to meet the Chrysler Vans LLC requirements as shown below: MB approved engine oil SAE MB sheet MB approved engine oil Fuchs Titan Supersyn Longlife SAE 5W-30 5W-30 229.3 229.
nf_BA.book Page 609 Friday, January 25, 2008 3:53 PM *Technical data Service products and capacities The following oils have been determined to meet the Chrysler Vans LLC requirements as shown below: The following oils have been determined to meet the Chrysler Vans LLC requirements as shown below: MB approved engine oil SAE MB sheet MB approved engine oil SAE MB sheet Pentospeed 0W-30 229.3 Shell Rimula Signia 228.51 Pentospeed 0W-30 VS* 0W-30 229.3 229.5 10W40 5W-40 229.
nf_BA.book Page 610 Friday, January 25, 2008 3:53 PM *Technical data Service products and capacities !CAUTION Fuels Warning G Gasoline is highly flammable and poisonous. It burns violently and can cause serious injury. Whenever you are around gasoline, avoid inhaling fumes and skin contact, extinguish all smoking materials. Never allow sparks, flame or smoking materials near gasoline! Direct skin contact with fuels and the inhalation of fuel vapors are damaging to health.
nf_BA.book Page 611 Friday, January 25, 2008 3:53 PM *Technical data Service products and capacities Do not exceed an engine speed of 3000 rpm if the vehicle is loaded with a light load, such as two persons and no cargo. Do not exceed 2/3 of maximum accelerator pedal position if the vehicle is fully loaded or operating in mountainous terrain. Fuel requirements Only use premium unleaded fuel: The octane number (posted at the pump) must be 91 min.
nf_BA.book Page 612 Friday, January 25, 2008 3:53 PM *Technical data Service products and capacities !CAUTION The following may lead to increased wear or engine damage: Using gasoline that does not meet the specifications mentioned above The use of non-approved special additives 6 612 Fuels for diesel engines !CAUTION Marine diesel fuel, Bio diesel fuel, heating oil or the like must not be used. Do not blend diesel fuel with marine diesel fuel, Bio diesel fuel or heating oil.
nf_BA.book Page 613 Friday, January 25, 2008 3:53 PM *Technical data Service products and capacities !CAUTION As bio diesel can be refined from a variety of raw materials resulting in widely varying properties, the only approved bio diesel content is one that meets ASTM D6751 specification. It must also have the necessary oxidation stability (min. 6h, proved with EN 14112 method) to prevent damages to the system from deposits and/or corrosion.
nf_BA.book Page 614 Friday, January 25, 2008 3:53 PM *Technical data Service products and capacities For more information on diesel fuels contact your authorized Sprinter Dealer. i Commercially available vehicular ULTRA-LOW SULFUR HIGHWAY DIESEL FUEL may contain up to 5% bio diesel. This proportion will not have an effect on performance and wear. Diesel fuels for use at very low temperatures 6 Only use commercially available vehicular ULTRA-LOW SULFUR DIESEL FUEL (15 ppm SULFUR MAXIMUM).
nf_BA.book Page 615 Friday, January 25, 2008 3:53 PM *Technical data Service products and capacities Do not blend other specific fuel additives with diesel fuel except for fuel flow improver. They only result in unnecessary cost, and may be harmful to the engine operation. Warning G Flow improvers The effectiveness of flow improvers cannot be guaranteed with all fuels. Observe the mixing ratio and comply with the handling instructions given from the manufacturer.
nf_BA.book Page 616 Friday, January 25, 2008 3:53 PM *Technical data Service products and capacities Coolants, lubricants, etc. Service interval Product name/product number MB sheet MS-No.1 Air conditioning The air conditioning system of your vehicle contains R-134a, a refrigerant that does not deplete the ozone layer in the upper atmosphere. Refrigerant R-134a — Refrigerant R-134a 361.0 MOPAR® 05127382AB Shell ATF 3403 Shell ATF 3353 236.10 236.
nf_BA.book Page 617 Friday, January 25, 2008 3:53 PM *Technical data Service products and capacities Service interval Product name/product number MB sheet MS-No.1 Brakes Use brake fluid approved for Chrysler Vans LLC standard MB 331.
nf_BA.book Page 618 Friday, January 25, 2008 3:53 PM *Technical data Service products and capacities Service interval Product name/product number MB sheet MS-No.1 Engine cooling system Whenever the coolant is replaced, a concentration of 50% by volume of corrosion inhibitor/antifreeze should be maintained. This provides antifreeze protection down to -34,6 °F (-37 °C).
nf_BA.book Page 619 Friday, January 25, 2008 3:53 PM *Technical data Service products and capacities Service interval Product name/product number MB sheet MS-No.1 Engine oil for gasoline engine M272 1 year or 10,000 mi (16,000 km) see “Engine oils” (page 350) 229.31, 229.3 229.51, 229.5 Engine oil for diesel engine OM642 2 years or 10,000 mi (16,000 km) See “Engine oils” (page 350) 228.51 229.31 229.51 Engine 1 Chrysler Vans LLC Material Standard-No.
nf_BA.book Page 620 Friday, January 25, 2008 3:53 PM *Technical data Service products and capacities Service interval Product name/product number MB sheet MS-No.1 Power steering Power steering, no fluid service required. Power steering fluid — Mobil ATF+4, Exxon Mobil Corporation, or equiv- 236.3 alent MOPAR® Part No. 05013457AA, or equivalent – BP Energear Hyep DC 80W-90 Mobil Delvac Synthetic Gear Oil 75W-90 235.20 235.8 MOPAR® Part No.
nf_BA.book Page 621 Friday, January 25, 2008 3:53 PM *Technical data Service products and capacities Capacities Vehicle Engine with oil filter Engine oil Tank Capacity Including reserve fuel Cooling system Windshield washer/ headlamp cleaning system Coolant1 Water with MB windshield washer fluid 2500 CRD, 3500 CRD 13.21 US qt. (12.5 l) 25.0 US gal (100 l)2 5.3 US gal (20 l) 10.75 US qt. approx. 7.40 US qt. (7.0 l) (10.0 l) 2500, 3500 10.04 US qt. (9.5 l) 25.0 US gal (100 l)2 5.
nf_BA.
nf_BA.book Page 623 Friday, January 25, 2008 3:53 PM *Technical data Rims and tires Rims and tires !CAUTION Only use tires which have been tested and approved for your Sprinter vehicle by the vehicle manufacturer. Tires approved by the vehicle manufacturer are developed to provide the best possible performance in conjunction with the driving safety systems on your Sprinter vehicle such as ABS, BAS, ASR or ESP®.
nf_BA.book Page 624 Friday, January 25, 2008 3:53 PM *Technical data Rims and tires Warning G Loose wheel nuts or bolts could cause the vehicle to lose a wheel while it is in motion. This would jeopardize the operating and road safety of the vehicle. You could lose control of the vehicle as a result, cause an accident an injure yourself or others.
nf_BA.book Page 625 Friday, January 25, 2008 3:53 PM *Technical data Rims and tires Vehicle Model Type Rims (steel) Rims (light alloy) Wheel offset Half dual spacing Wheel fixture Tightening torque (steel wheel) Tightening torque (light-alloy wheel) Summer tires All-season tires1 2500 6.5 J x 16 6.5 J x 16 2.13 in (54 mm) Winter tires2 LT 245/75 R16 120/116N M+S . Wheel bolts 177 lb-ft (240 Nm) 133 lb-ft (180 Nm) – LT 245/75 R16 120/116N 3500 5.5 J x 16 – – 4.82 in (122.
nf_BA.book Page 626 Friday, January 25, 2008 3:53 PM *Technical data Tire inflation pressure Tire inflation pressure Observe the information on recommended tire inflation pressure in the “Operation” section ( page 361). The following table lists the recommended cold tire inflation pressures for all load conditions up to the maximum permissible weight limits (GAWR). The tire inflation pressures listed apply to the tires installed as original equipment.
nf_BA.book Page 627 Friday, January 25, 2008 3:53 PM *Technical data Tire inflation pressure Set the correct tire pressure before loading the vehicle. If the vehicle has been loaded, check the tire pressures and correct them if necessary. The tires can be considered cold if the vehicle has been parked for at least 3 hours or driven less than 1 mile (1.6 km) at an ambient temperature of approximately 68 °F (20 °C).
nf_BA.book Page 628 Friday, January 25, 2008 3:53 PM *Technical data Tire inflation pressure Tire Permissible axle loads (see certification label) Front axle 3970 lbs (1801 kg) 6 Rear axle 4080 lbs (1851 kg) 4410 lbs (2000 kg)* 5360 lbs (2431 kg) 7060 lbs (3202 kg) 7720 lbs (3502 kg) LT 215/85 R 16 — 115/112 N 55 psi (3.8 bar) 61 psi (4.2 bar) — 55 psi (3.8 bar) 61 psi (4.2 bar) LT 215/85 R 16 — 115/112 Q 55 psi (3.8 bar) 61 psi (4.2 bar) — 55 psi (3.8 bar) 61 psi (4.
nf_BA.book Page 629 Friday, January 25, 2008 3:53 PM *Technical data Lashing points and carrier systems Lashing points and carrier systems Lashing points !CAUTION Observe the data on the maximum load-bearing capacity of the individual lashing points. During full-braking applications, for example, forces can be involved that are much greater than the weight force of the load.
nf_BA.book Page 630 Friday, January 25, 2008 3:53 PM *Technical data Lashing points and carrier systems The specified values only apply to loads on the load compartment floor if: the load is secured to 2 lashing points on the rail and the distance to the next lashing point used on the same rail is about 3 ft (1 m).
nf_BA.book Page 631 Friday, January 25, 2008 3:53 PM *Technical data Lashing points and carrier systems !CAUTION The weight of any load carried on the roof, including the roof rack, must not exceed the maximum permissible roof load. Warning G The roof rack supports must be arranged at equal distances. High roof loads may cause a significant deterioration in handling, steering and braking characteristics even if the maximum permissible gross vehicle weight or axle loads have not been exceeded.
nf_BA.book Page 632 Friday, January 25, 2008 3:53 PM *Technical data Vehicle identification labels Vehicle identification labels i For certain vehicles, vehicle data cards are delivered with the vehicle. These vehicle data cards contain all the important details of your vehicle, e.g. vehicle identification number, engine number and subassembly numbers together with the model and optional equipment codes. This data is required when ordering parts and for questions of a technical nature.
nf_BA.book Page 633 Friday, January 25, 2008 3:53 PM *Technical data Vehicle identification labels The Vehicle Identification Number (VIN) can be found: Example vehicle safety certification label (U.S. vehicles) on the vehicle or incomplete vehicle safety certification label embossed on the engine compartment rear bulk ( page 379) Example vehicle safety certification label (Canada vehicles) Example incomplete vehicle safety certification label (U.S.
nf_BA.book Page 634 Friday, January 25, 2008 3:53 PM *Technical data Vehicle identification labels Example Engine Compartment 3 VIN (embossed on the engine compartment rear bulk) 4 Engine number (engraved on gasoline engine) 5 Engine number (engraved on diesel engine) 6 Emission control information label and engine oil warning label1 7 Emission control information label (gasoline engine) ( page 380) Example incomplete vehicle safety certification label (Canada vehicles) 2 VIN 6 1.
nf_BA.book Page 635 Friday, January 25, 2008 3:53 PM *Technical data Vehicle identification labels Example emission control information label for diesel engines (U.S.
nf_BA.book Page 636 Friday, January 25, 2008 3:53 PM *Technical data Vehicle identification labels i i The data shown on the labels is for illustrative purposes only. The data is specific to each vehicle and may vary from the data shown in the illustration. Refer to the label on your vehicle for data specific to your vehicle. The data shown on the placard is for illustrative purposes only.
nf_BA.book Page 637 Friday, January 25, 2008 3:53 PM Index Numerics 12 V socket . . . . . . . . . . . . . . . . . 297 A A ABS see Antilock Brake System Acceleration skid control (ASR) . 73 activating/deactivating . . . . . . . . 74 display message . . . . . . . . 500–501 indicator lamp . . . . . . . . . . 462–465 malfunction . . . . . . . . . . . . . . . . 465 warning lamp . . . . . . . . . . . . 73, 461 Accessory weight . . . . . . . . . . . . 393 Accident . . . . . . . . . . . . . . . . . . . .
nf_BA.book Page 638 Friday, January 25, 2008 3:53 PM Index Alarm audible . . . . . . . . . . . . . . . . . . . . 431 Anticorrosion/antifreeze fluid . . . . 618 Antilock Brake System (ABS) . . . . 70 display message . . . . . . . . 491–492 indicator lamp . . . . . . . . . . 462, 466 malfunction . . . . . . . . . . . . 466–467 Anti-theft alarm system (ATA) . . . 77 malfunction . . . . . . . . . . . . . . . . 431 switching off the alarm . . . . . . . . 78 Anti-theft system immobilizer . . . . . . . . . . . .
nf_BA.book Page 639 Friday, January 25, 2008 3:53 PM Index stopping . . . . . . . . . . . . . . . . . . . towing . . . . . . . . . . . . . . . . . . . . trailer towing . . . . . . . . . . . . . . . working on the vehicle . . . . . . . . Auxiliary heating . . . . . . . . . . . . . heater booster function . . . . . . . malfunctions . . . . . . . . . . . . . . . with water heater changing the remote control batteries . . . . . . . . . . . . . . . . . remote control . . . . . . . . . . . .
nf_BA.book Page 640 Friday, January 25, 2008 3:53 PM Index Brake lamp . . . . . . . . . . . . . . 530, changing bulbs . . . . . . . . . . . . . . high-mounted third brake lamp . Brake pads/linings display message . . . . . . . . . . . . wear indicator . . . . . . . . . . . . . . Brake system brake pad/lining wear indicator . . . . . . . . . . . . . . . 470, indicator lamp . . . . . . . . . . 462, malfunction . . . 465, 466, 467, Braking driving tips . . . . . . . . . . . . . . . . . Breaking in . . . . . .
nf_BA.book Page 641 Friday, January 25, 2008 3:53 PM Index Checking tire pressure electronically with the Advanced Tire Pressure Monitoring System (Advanced TPMS) . . . . . . . . . . . . 373 Checking tire pressure electronically with the Tire Pressure Monitoring System (TPMS) . . . . . . . . . . . . . . 367 Checks, regular . . . . . . . . . . . . . . 312 Children in the vehicle . . . . . . . . . . . . . . . . 55 ISOFIX seat securing system . . . . 61 LATCH type child restraint system . . . . . . . . . . .
nf_BA.book Page 642 Friday, January 25, 2008 3:53 PM Index Consumption statistics (vehicles with steering wheel buttons) . . . . . . . . . . . . . . . . . . . . 177 Coolant . . . . . . . . . . . . . . . . . . . . . 618 adding . . . . . . . . . . . . . . . . . . . . 329 anticorrosion/antifreeze fluid . . 618 display message . . . . . . . . . . . . 502 temperature . . . . . . . . . . . . . . . . 200 temperature display (vehicle with steering wheel buttons) . . . . . . .
nf_BA.book Page 643 Friday, January 25, 2008 3:53 PM Index Display . . . . . . . . . . . . . . . . . . . . . 158 vehicles with steering wheel buttons . . . . . . . . . . . . . . 158 display messages . . . . . . . . . . 489 outside temperature . . . . . . . . 157 standard display . . . . . . . . . . . 157 vehicles without steering wheel buttons display messages . . . . . . . . . . 484 outside temperature . . . . . . . . 148 Door control panel . . . . . . . . . . . . 31 opening the door . . . . . . . . . . .
nf_BA.book Page 644 Friday, January 25, 2008 3:53 PM Index E E EBV see Electronic brake force distribution Electric sliding door . . . . . . . . 92, 98 programming the key . . . . . . . . . . 97 programming the remote control . 97 reset . . . . . . . . . . . . . . . . . . . . . . . 98 unlocking mechanism for the electric drive . . . . . . . . . . . . . . . . 96 Electrical heater booster system . . . . . . . . . . . . . . . . . . . . . 235 Electrical system fuses . . . . . . . . . . . . . . . . . . . . .
nf_BA.book Page 645 Friday, January 25, 2008 3:53 PM Index Environmental protection . . . . . . . 5 ESP®/ASR warning lamp . .22, 73, 461 Exterior lighting . . . . . . . . . . . . . 129 additional bulbs . . . . . . . . . . . . . 533 Constant headlamp mode (vehicles with steering wheel buttons) . . . . . . . . . . . . . . . . . . . 171 delayed switch-off (vehicles with steering wheel buttons) . . . . . . . . . . . . . . . . . . . 173 front bulbs . . . . . . . . . . . . . . . . . 526 lamp failure monitor . .
nf_BA.book Page 646 Friday, January 25, 2008 3:53 PM Index G G Gasoline . . . . . . . . . . . . . . . . . . . . consumption . . . . . . . . . . . . . . . reserve fuel warning lamp . 475, tank capacity . . . . . . . . . . . . . . . Gauge vehicles without steering wheel buttons standard display . . . . . . . . . . . GAWR . . . . . . . . . . . . . . . . . . . . . . GCWR . . . . . . . . . . . . . . . . . . . . . . Gear oil . . . . . . . . . . . . . . . . . . . . . Glove box . . . . . . . . . . . . . . . . . .
nf_BA.book Page 647 Friday, January 25, 2008 3:53 PM Index Heater . . . . . . . . . . . . . . . . . 228–233 air distribution . . . . . . . . . . . . . . 230 airflow . . . . . . . . . . . . . . . . . . . . 230 air-recirculation mode . . . . . . . . 231 control panel . . . . . . . . . . . . . . . 228 defrosting . . . . . . . . . . . . . . . . . 232 fogged-up windows . . . . . . . . . . 231 heating . . . . . . . . . . . . . . . . . . . . 229 see Rear heater . . . . . . . . . . . . . 233 special settings . . .
nf_BA.book Page 648 Friday, January 25, 2008 3:53 PM Index brake pad/lining wear . . . . . . . . 470 coolant . . . . . . . . . . . . . . . . . . . . 474 engine diagnostic . . . . . . . . . . . . 477 ESP® . . . . . . . . . . . . . . . . . 462, 468 handbrake . . . . . . . . . . . . . . . . . 189 operating speed governor (ADR) . . 274 poly-V-belt . . . . . . . . . . . . . . . . . 469 preglow . . . . . . . . . . . . . . . 186, 476 reserve warning indicator (fuel) . . . . . . . . . .
nf_BA.book Page 649 Friday, January 25, 2008 3:53 PM Index K K Key battery check lamp . . . . . . . . . . . 86 buttons . . . . . . . . . . . . . . . . . . . . 85 changing the batteries . . . . 539, 540 lost . . . . . . . . . . . . . . . . . . . . . . . 448 malfunction . . . . . . . . . . . . 446–449 problems . . . . . . . . . . . . . . . . . . 445 Key no. . . . . . . . . . . . . . . . . . . . . . 632 Key positions Kickdown . . . . . . . . . . . . . . . . . . . 206 Kilopascal . . . . . . . . . . . . . . .
nf_BA.book Page 650 Friday, January 25, 2008 3:53 PM Index Limit speed flat tire . . . . . . . . . . . . . . . . . . . . 570 Load distribution . . . . . . . . . . . . . 279 Loading guidelines . . . . . . . . . . . 276 Locator lighting setting (vehicles with steering wheel buttons) . . . . . . . . . . . . . . . . . . . 172 Locking button (key) . . . . . . . . . . 85 Locking knob . . . . . . . . . . . . . . . . . 89 Low-beam headlamps . . . . 131, 526 automatic headlamp control . . . 132 changing bulbs . . .
nf_BA.book Page 651 Friday, January 25, 2008 3:53 PM Index N N Navigation system . . . . . . . . . . . 315 NHTSA reporting procedure . . . . 15 Night reflectors securing . . . . . . . . . . . . . . . . . . . 191 Normal occupant weight . . . . . . 396 Notes on operation . . . . . . . . . . . 194 O O Occupant distribution . . . . . . . . Odometer . . . . . . . . . . . . . . . 146, setting the unit (vehicle with steering wheel buttons) . . . . . . . . . . . . . . . . . . . trip meter . . . . . . . . . . . .
nf_BA.book Page 652 Friday, January 25, 2008 3:53 PM Index vehicles without steering wheel buttons . . . . . . . . . . . . . . . . . . . . 148 Overhead control panel . . . . . . . . 27 hands-free microphone . . . . . . . . 27 interior lighting . . . . . . . . . . . . . . 137 Overrun cut-off . . . . . . . . . . . . . . 194 Overview indicator and warning lamps . . . . 22 menus (vehicles with steering wheel buttons) . . . . . . . . . . . . . . . . . . . 154 switch . . . . . . . . . . . . . . . . . . . . .
nf_BA.book Page 653 Friday, January 25, 2008 3:53 PM Index using . . . . . . . . . . . . . . . . . . . . . Premium unleaded gasoline . . . Production options weight . . . . Programmed maximum speed . PSI . . . . . . . . . . . . . . . . . . . . . . . . PTS see Parktronic Pulling away . . . . . . . . . . . . . . . . on a slippery surface . . . . . . . . . R 557 610 397 311 397 186 186 R Radial-ply tires . . . . . . . . . . . . . . 345 Radio . . . . . . . . . . . . . .
nf_BA.book Page 654 Friday, January 25, 2008 3:53 PM Index Rear window heating . . . . . . . . . 214 malfunction . . . . . . . . . . . . . . . . 458 Rear window wiper . . . . . . . . . . . 212 Rear-view mirror . . . . . . . . . . . . . 208 Recommended tire inflation pressure . . . . . . . . . . . . . . . . . . . . 397 Refueling . . . . . . . . . . . . . . . . . . . 316 Remote control auxiliary heating . . . . . . . . . . . . . 239 battery check lamp . . . . . . . . . 240 changing the batteries . . . . . .
nf_BA.book Page 655 Friday, January 25, 2008 3:53 PM Index fore-and-aft adjustment . . . . . . . 114 heating . . . . . . . . . . . . . . . . . . . . 122 malfunction . . . . . . . . . . . . . . 458 height . . . . . . . . . . . . . . . . . . . . . 115 suspension . . . . . . . . . . . . . . . . 116 suspension lock . . . . . . . . . . . . . 116 swivelling . . . . . . . . . . . . . . . . . . 116 vertical lock . . . . . . . . . . . . . . . . 116 Seat belt . . . . . . . . . . . . . . . . . . . .
nf_BA.book Page 656 Friday, January 25, 2008 3:53 PM Index Side lamps . . . . . . . . . . . . . . . . . . 526 Side marker lamps . . . . . . . . . . . 526 changing bulbs . . . . . . . . . . . . . . 535 Side wall . . . . . . . . . . . . . . . . . . . . 397 Side windows cleaning . . . . . . . . . . . . . . . . . . . 421 operating . . . . . . . . . . . . . . . . . . 244 Sliding door closing aid . . . . . . . . . . . . . . . . . . 92 electric . . . . . . . . . . . . . . . . . . . . .
nf_BA.book Page 657 Friday, January 25, 2008 3:53 PM Index releasing the lock . . . . . . . . . . . 111 Steps . . . . . . . . . . . . . . . . . . . . . . 419 Stickers . . . . . . . . . . . . . . . . . . . . . 13 Storage compartment under the passenger’s seat . . . . . . . . . 288 Storage compartments . . . 19, 26, 287–290 cup holder . . . . . . . . . . . . . . . . . 291 glove box . . . . . . . . . . . . . . . . . . 288 holder for bottled drinks . . . . . . 292 passenger door . . . . . . . . . . . . .
nf_BA.book Page 658 Friday, January 25, 2008 3:53 PM Index Tempatic see Air conditioning Temperature setting the unit (vehicles with steering wheel buttons) . . . . . . . . . . . . . . . . . . . Tempmatic airflow . . . . . . . . . . . . . . . . . . . . air-recirculation mode . . . . . . . . control panel . . . . . . . . . . . . . . . defrosting . . . . . . . . . . . . . . . . . . fogged-up windows . . . . . . . . . . reheat function (dehumidification) . . . . . . . . . . . residual heat . . . . . . . . . .
nf_BA.book Page 659 Friday, January 25, 2008 3:53 PM Index direction of rotation, spinning . . driving instructions . . . . . . . . . . important guidelines . . . . . . . . . inflation pressure . . . . . . . . 361, information placard . . . . . . . . . . inspection . . . . . . . . . . . . . . . . . load limit information . . . . . . . . . load rating . . . . . . . . .383, 384, loading Information . . . . . . . . . . loading terminology . . . . . . . . . . loading the vehicle . . . . . . . . . . .
nf_BA.book Page 660 Friday, January 25, 2008 3:53 PM Index Towing . . . . . . . . . . . . . . . . . . . . . in the event of a malfunction in the electrical system . . . . . . . in the event of particular malfunctions . . . . . . . . . . . . . . . vehicle that is stuck . . . . . . . . . . Towing eye installing/removing . . . . . . . . . . Tow-starting . . . . . . . . . . . . . . . . Traction . . . . . . . . . . . . . . . . . . . . Trailer safety notes . . . . . . . . . . . . . . . . towing . . . . . . . . .
nf_BA.book Page 661 Friday, January 25, 2008 3:53 PM Index leaving in storage . . . . . . . . . . . 456 locking with key . . . . . . . . . . . . . . 89 locking/unlocking centrally . . . . 105 opening . . . . . . . . . . . . . . . . . . . . 83 with remote control . . . . . . . . . 86 with the key . . . . . . . . . . . . . . . 88 registering . . . . . . . . . . . . . . . . . . . 9 towing . . . . . . . . . . . . . . . . . . . . 585 towing out . . . . . . . . . . . . . . . . . 587 tow-starting . . . . . . . .
nf_BA.book Page 662 Friday, January 25, 2008 3:53 PM Index Windshield heating . . . . . . . . . . . 213 Windshield washer fluid display message . . . . . . . . 496, 512 wiping with . . . . . . . . . . . . . 211, 213 Windshield washer system . . . . 333 indicator lamp . . . . . . . . . . . . . . 482 rain sensor . . . . . . . . . . . . . . . . . 210 Windshield wipers . . . . . . . . . . . 210 cleaning . . . . . . . . . . . . . . . . . . . 420 intermittent wipe . . . . . . . . . . . . 210 malfunctions . . . .
INSTALLATION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this vehicle’s electronic system to provide immunity to radio frequency signals. Mobile two-way radios and telephone equipment must be installed properly by trained personnel. The following must be observed during installation. The positive power connection should be made directly to the battery and fused as close to the battery as possible.
2008 Dakota 2008 OWNER’ S MANUAL 81-326-0899 First Edition Printed in U.S.A.
