2007 Sprinter Van Owner's Manual

188
Operation
Engine
4
Checking the engine oil level in the dis-
play
In vehicles with diesel engines, you can
view the engine oil level in the display.
When the oil is being checked, the vehicle
must
 be standing level
 be at normal operating temperature
 have been standing with the engine
switched off for at least five minutes
 Switch on the ignition ( page 67).
The display is activated.
Vehicles without steering wheel buttons
 Press the menu button on the in-
strument cluster repeatedly until you
see the P symbol in the display.
The
--:-- display flashes during the
measurement process.
The following messages may be displayed:
 Check the engine oil level again after a
few minutes.
Vehicles with steering wheel buttons*
 Press the button on the instrument
cluster ( page 84).
i
If no oil level reading is shown again,
check the engine oil level with the dip-
stick.
Have the engine oil level display
checked at an authorized Sprinter
Dealer.
!CAUTION
Have any excess oil drained or si-
phoned off at an authorized Sprinter
Dealer. Otherwise, the engine or cata-
lytic converter could be damaged.
i
If at extremely low temperatures no en-
gine oil level is displayed after 5 min-
utes, wait a further 5 minutes before
repeating the engine oil level check.
P
OK
 Do not add oil.
-1.0 qt
 Add the amount of oil
shown ( page 190).
-1.5 qts
-2.0 qts
HI
 The engine oil level is
too high. Have the oil
siphoned off.
i
Engine oil level display:

qt in USA only

l in Canada only